Query Designer Doubt

Hai,
I have a requirement to display a report in the following format:
C1                                C2
K1                                K2
K111 K112 K113            K211 K212 K213    
K121 K122 K123            K221 K222 K223
K131 K132 K133            K231 K232 K233. ..
Then I need to find the weighted average of every keyfigure and display that also. Here C stands for Characteristic and K for keyfigure.
How do i do it?
Regards,
Neha Solanki

MSK,
These two pieces of information are at different levels. GR Date is mapped only to the GR quantities cube and no mapped to the confirmation quantities cube.
Map GR date in the multi-provider to a date in the confirmation quantities cube.
Aneesh

Similar Messages

  • Doubt on Rows and Coloums in BEx Query Designer.

    Hello, Experts.
    I have a Doubt in BEx Query Designer.
    In the Rows I have a Fiscal year Period,  if the user enters the Fiscal year period for e.g. : 001/2006  .  
    in the columns i have  forecast for the Fiscal year period which user entered ( 001/2006 ),   and we have another column pervious ( Prior )fiscal year period ( 001/2005 ). 
    My Questions is ,  as we are Restricting with 001/2006 will the query retrieve the values of 2005 or not?
    Thanks in Advance .
    Sharp

    yes i am  Doing Offest.
    I moved this Fiscal year Period to Free char,   and i Restricted with Pervious Fical Year period and Fical year period .  it worked.  but
    when i kept this in Rows and deleted Previous Fiscal Year period .  it is displaying blanks.   in prior years forecast.
    is it because i am Ristricting it to only fical year period  which user entered
             Colums-->  Forcast ( User Entered year )          Prior year
    Rows
    Fiscal year period
      Fiscal year period( user enterd )
    Thanks

  • Doubt in Query designer

    Hi all:
    I have a doubt in Query ...
    I have an infocube for GR quantities and other infocube for confimation quantities.
    In a multiprovider,i collect this two cubes.In query designer,if i given GR date as i/p,
    confirmation quantities doesnt display.IF i didnt give GR date as i/p,then both GR and Confimation
    quantities display in seperate line.In that case if i see the confirmation quantitis column,GR quantity is
    and same for GR quanitiy.
    Waiting for your inputs.
    Rgds
    MSK

    MSK,
    These two pieces of information are at different levels. GR Date is mapped only to the GR quantities cube and no mapped to the confirmation quantities cube.
    Map GR date in the multi-provider to a date in the confirmation quantities cube.
    Aneesh

  • Query disable status in bex query designer

    hi all,
    when i opened query in query designer for PA_PA cube it is in disabled mode.iam unabled to restrict or do any changes.and giving error like "the dependent objects are in different transport orders."i installed this particular queries in BI content also.please help me in this issue.
    Regards
    Vamshi D Krishna

    Hi Vamshi,
    go to rsa1 - transport connection and select  ur query and drag & drop into third screen
    u can see the locked request no. of ur query ..
    u can take that no. and go to se03 -- give that request no. & execute unlock..
    now, again come back to ur transport connection, now u can see under ur query no transport request has been assigned.. select the truck symbol..
    It will ask u for the new request no. assign a new request no. of urs and check the query at the designer level. u can able to change the query ..
    Hope it helps.
    If u have any doubt reply to this message.
    Thanks & Regards,
    V. Vijay Kumar.

  • Can Power Users or Mgt Create and Design Reports Through Query Designer ?

    Dear BI consultants,
    Iam new to BI.
    My management has requested me to Train Power users from All Modules(FICO,HR,QM,PP,SD,MM) to Create Queries and Design Through Query Designer.
    My question is are we suppose to Give query Designer Access to Power users or Mgt so that they can create Queries and reports by themselves.Please Suggest me wht is the Best Practices.
    is it feasable to train power users and Mgt as to how 2 create queries. will there be any side effect on the System or our end.
    Plz suggest.
    wht are the advantages and disadvantages of this.
    If I train the Power users then is there any risk of my Job.
    since they will be creating all reports by themselves.
    wht else can a BI consultant do since iam in a support project.
    how do i convince my Mgt?
    Plz Suggest.
    Thanks Awaiting

    This is common procedure maintained in most of the company's for end users.
    There is no issue if you train the power users.you will be the first point of contact if they have any doubts.and more over you are supporting for your client right? this can't be handed over to power user or end user. data is imp for the client so there will not be any problem for you, if any issue comes while loading you need to take care of the errors and fix the.
    power users or end user will be familiar with Business requirement not with the Query building logic's not with the BW procedure so no worries for you.
    as vineeth said its better to keep control regarding the global and key things at your end so that you will not loose contol on the reports.

  • Query designer report and Web Templates

    Dear All,
    I have a very basic/stup doubt.
    Are reports made through Bex Query Designer and Web Templates the same?
    Actually there is a following requirement:-
    "Navigate from a BW Web template to a PCUI application". I have a document related to it but it gives me step on how can i modify my web templates to achieve this functionality. But all my reports are made through query designer and it available to user through Web Dynpro portal.
    So i just wanted to know is Web Template and Reports made through query designer the same? So that i can implement the changes in my report.
    Thanks.

    Hi Anup,
    by using web templates we can use N number of data providers (Queries) for a single analysis view with various available options. - N number of Queries can be assigned to Web template to create a web report
    but by using the Query designer ,you can create a single report which may not provide sufficient information to the client and the number of features are less compared to web template.
    as you mentioned that you are using the web dynpro.
    i think the web dynpro requires the web reports as an iview and ths iview can be created by using the Query designer and or web app designer.
    so the most clear view can be given to client using the WAD reports

  • Filter Information for two parameters in Query Designer

    Hi Gurus !!
    I have a problem for filter information for two parameters in Query Designer,
    the first parameter correspond a Ejercise-Period, the second parameter correspond
    a Compensation Date of document, both parmeters must have date less than or equal to
    to the parameter date input for screen (mm.aaaa).
    Internally the Report must filter countable information for Countable Date <= Parameter Input and
    Compensation Date of document <= Parameter Input.
    If i assign two filter parameter in Query Designer, not could realise this.
    Exist any simple form to realise this ??
    Wait for yours responses.
    Thank You.

    Hi shanthi bhaskar,
    Thanks a lot for your answer.
    I have one doubt about it:  with this solution that you propoused the user will be able to select the values for plant?.
    I mean, the user make the selection of the value for Zone, then he wants to see the in plan´s variable the values that corresponds with this Zone for make a new selection of plan.
    What happens if I need this dependency also in another variable like time variable?
    Thanks  a lot

  • Business Explorer-Query Designer

    Hi,
    I am running a Query in internet explorer from Query Designer...When i drag and drop infoobjects certain infoobjs description i need to change as per requirements...and when i run the query from query designer it opens in a internet explorer only but i get some warning messages saying that "description for so and so infoobject is changed" but no doubt i get the report correctly... Please tell me how to suppress the warning messeges...
    i tried rsrt transaction to suppress results as one option is there to suppress results but when i run that transaction its throwing dump...
    please tell me anyother way to resolve this...
    thanks,
    Vijaya.

    Hi Vijaya,
    Do you get those messages each time your run the query? In RSRT you have the option to suppress message, not results...is this what you were referring to?

  • Dependency between two Variables in query designer filter prompt

    Hi Experts,
    I'm working in BW 3.5 query designer and I have two characteristics ZONE and PLANT (both are filter variables) and what I need is that when the user make a selection of one ZONE (for example Zone north) then he will be able to see in the Plan Variable the values for selection that corresponds with the Zone selected previously in the other filter variable (ZONE).
    Thanks in advantage
    Roberth Reyes

    Hi shanthi bhaskar,
    Thanks a lot for your answer.
    I have one doubt about it:  with this solution that you propoused the user will be able to select the values for plant?.
    I mean, the user make the selection of the value for Zone, then he wants to see the in plan´s variable the values that corresponds with this Zone for make a new selection of plan.
    What happens if I need this dependency also in another variable like time variable?
    Thanks  a lot

  • Exceptions in Query designer

    Hello experts,
    I have a basic doubt on Exceptions in the Query designer.
    Say I create an exception which says any value between 1 and 10 is good and should have a certain color and another exception on the same key figure which says that values between 8 and 12 are bad and denote with a different color.
    Now I get a value 0f 9 for my Kf then how does BI process the exception?
    Thanks and Regards
    Ankit

    Hi,
    You have to make exception for values 1-10 as per the requirement.
    and starting from 11-12 give another with diff color and notation. Like wise it's better to identify.
    Reg
    Pra

  • Transport dialog box in Query designer

    Hi Friends,
    I have an issue from my BI team -
    When the team go to query designer and change any query and then save, the system doesn't pop up for a transport request automatically even the client settings are fine saying automatic recording of changes.
    Is there any manual configuration to be done to enable this option? Please advice.
    Regards,
    Murthy VR

    Hi Murthi,
    Yes there is manual setting which needs to be done.
    Go to RSA1-> Transport Connection -> right upper pane you will see 'BEx'. Click on BEx. It will ask you for the request. Create one new request in SE01 and then assignit in BEx. This point onwards all of your query changes will be saved under this request automatically.
    Hope this helps.let me know if you have any doubt.
    Regards,
    Viren

  • IF and ABS condition statement in BEX query designer

    Hi,
    I would like to ask the best way for me to produce an acceptable result from Excel IF and ABS Condition statement.
    The condition statement that I have on my Excel file is
    =IF((A2-B2)>0,ABS(A2-B2),0)
    I'm trying multiple times to reproduce this in BEX Query designer, unfortunately I'm getting a bad result or unacceptable formula.
    Anyone who could help me with my issue?
    Thanks,
    Arnold

    Hi Arnold,
    Thank you,
    Nanda

  • Text value is not getting displayed in Query designer !!

    Dear experts..,
    i have created a new query in query designer using my info provider and then selected one field in default value and then trying to restrict that particular field while selecting the restriction in query designer am getting the exact text value but after generating the report instead of text value , key value is getting displayed....so how can i get text instead of key value??
    please help me friends....
    i have posted in OSS mesage also...i got a reply like...even i didnt understand his reply too...what he is trying to say?
    whether can i get text display or not???
    can any one help me in this regard???
    SAP Reply----
    Hello kumar,
    After another analysis I have to inform you about general concept of
    "compounded characteristics".
    A compounded characteristic bounds two characteristics. The technical
    name is generated by both technical names of the two characteristics
    combined by two underlines "__".
    An individual text is only available for one single combination of both
    characteristics.
    Example:
    =======
    Compounded characteristic "Famous family name" is a combination of
    characteristic "COUNTRY" & "ETHNIC". Technical name: COUNTRY__ETHNIC
    Values for Country: USA, Australia
    Values for Ethnic: Asian, Latino
    Possible value combinations with individual text:
    USA & Asian; text: "Ling"
    USA & Latino; text: "Sanchez"
    Australia & Asian; text: "Chu"
    Australia & Latino; text: "Garcia"
    (Keep in mind the individual text only valid for the specific
    combination.)
    In analogy to the issue that you reported, you want to restrict this
    compounded characteristic. In the window where you select the restrictedvalue (called Selector) you'll see on the left hand side all available
    combinations of the characters with an individual text.
    You select family name "Chu" and drag'n'drop it to the right side.
    Actually you can only restrict the right compounded characteristic. In
    our example you would restrict on characteristic "ETHNIC" with value
    "Asian". (When you switch on technical names this comes more clear). Thetext "Chu" is displayed in the context of Selector because you selected
    value combination Australia & Asian. But in the end it's just a
    placeholder(!) for any combination of characteristic "ETHNIC" and value
    #Asian#; in our example it could be USA & Asian "Ling" or Australia &
    Asian "Chu").
    By leaving the Selector the individual text is gone because now the
    context is lost between the two characteristics. You have just a
    restriction on characteristic "ETHNIC" with value "Asian". An individualtext can't be displayed because the compounded characteristic is not
    specified for this restriction.
    You're right, it is confusing when "loosing" the text of a restriction.
    But accoring to the concepts of the compounded characteristics it
    is a correct behavior.

    Hi anandkumar,
    I belive this issue can be resolved by changing the  Query proprties for the perticular field.
    Kindly check the Field proerties in query designer and ensure that Text is enabled ather than Key.
    __Field property check up:__Go to query designer->click onn the field-> Right hand side in properties click on display tab-> select Text in drop down menu of Display as tab.
    FURTHER CHECK UP: check the master data avaiulability for the perticular info object, if masterdata is not available, do the text data for txt data availability in report level.
    Hope this helps you!!
    Best Regards,
    Maruthi

  • Master data is not getting displayed in the Query Designer

    Hi,
    I have a DSO in which I have an InfoObject called Emp No. in the Data Field.
    The Emp.No is being maintained as master with (Emp Name, Address, Telephone No, DOB) as attributes.
    I have loaded the data in the Emp. No. master. Then tried loading the transaction data in DSO.
    The Emp.No is there in the DSO active data, but in the query designer its not getting displayed.
    Hope its clear.
    Please help.
    Thanks

    Hi,
    I have brought the Emp. No. in the Key Field and also have activate the master data again.
    Yet my Query Designer doesn't have the Emp. No.
    I have done a full load for both Master and Transaction.
    Please advice me what the other alternative.
    Thanks

  • Error while trying to Open and Delete a BEx Query in Query Designer.

    Hi Experts,
    I have been facing this issue with BEx Query in Designer mode for a couple of days now in Development Environment in BI 7.0.
    I would like to Delete an unwanted BEx Query because I need to give it's name to another BEx Query.
    Whenever I try to Open this Query in BEx Query Designer to Delete, it gives out an error saying:
    "An error occurred while communicating with the BI server.
    As a result of this error, the system has been
    disconnected from the BI server.
    Detailed Description:
    STOP: Program error is class SAPMSSY1 method : UNCAUGHT_EXCEPTION
    STOP: System eror in program CL_RSR and form GET_CHANMID-01 - (see long text)"
    Details text is as below:
    Diagnosis
    This internal error is an intended termination resulting from a program state that is not permitted.
    Procedure
    Analyze the situation and inform SAP.
    If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
    For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.
    I have tried with SAP Note 899572, but still it's the same.
    Has anyone faced similar issue? Could you please let me know if you have better ideas or solution?
    Your time is much appreciated.
    Thanks,
    Chandu

    Arun - Thanks a million. You saved me Nine. It worked.
    Could you also please tell me how to rename (Technical) a Query or is it still "Save the Query As" the only way...?
    Points already assigned.
    Thanks,
    Chandu

Maybe you are looking for