QuickWeb Clock Time

Pavilion G4-1229dx, Windows 7 64 bit
When the Windows clock is set to the correct local time, the QuickWeb time is too hours fast.
To get QuickWeb clock to the same time as the Windows clock, I must set the QuickWeb clock to use a time zone two hours earliert than my local time zone.
This work around does the job but I don't think it should work that way. I've tried changing the Windows internet sync location, tried manually settiing one clock, both clocks, and not manually setting either clock; the Bios time is correct. Nothing helps. I've run out of ideas.
Any suggestions for getting the QuickWeb clock and the Windows clock on the same time zone showing the correct local time?
I looked at some HP laptops on display in stores and they have the same two hour error.
Thanks,
Rich

HP is offering to replace or refund the price paid for the laptop as they are unable to fix the issue nor have any matching replacement....
All those having HP laptops, its a good opportunity to check your Quick web clock time and if it doesnt match Windows clock time (which i am 100% sure will not), then approach HP Support and escalate for replacement / refund....irrespective of how old your machine is this issue is inherent problem in all HP machines for which you should be duly compensated
Dont miss this chance of recovering the value for money paid to HP
Cheers!
Tim

Similar Messages

Digital Clock Time is not display present time

Dear all i have one doubt, i want to confirm please chek my clock time is not display properly what is the problem with this coding
http://www.newtonclients.com/clock/TEST2.html
Please help

Dear all i have one doubt, i want to confirm please chek my clock time is not display properly what is the problem with this coding
http://www.newtonclients.com/clock/TEST2.html
Please help

Flash Flip Clock Timer

Hi all,
I am looking to develop a flip clock timer to place on a
company website to show when some software will be made available
(basically a release count down timer). I have seen a similar style
of what I am looking to do
here.
Although the one I want to create should count down not display the
time.
The reason for my post is I have no idea where to start and
was hoping someone could point me in the right direction to a
tutorial or provide a small sample fla.
Kind regards
David.

that's going to require some advanced scripting and i don't
know of any tutorials. i made something similar with numbers
flipping like an old-time scoreboard.
you'll need to tween the _yscale and _y property of the
number lower halves to give the appearance of flipping
numbers.

How do i make a clock/timer that can be reset to zero?

I need to make this clock/timer to run my control off of. To be more detailed I need to ouput a steadily increasing voltage slowly over a period of time. I have my DAQ assist set up to output a voltage to my device but i can't figure out how to make the timer/clock correctly.

It seems you simply want to update the ramp at a constant dt, why would you need to reset anything?
There are two main ways to do this:
software timed: use a loop with a given delay and write single points to the output.
hardware timed: setup timing for your task and send the entire ramp to the hardware. It will do the rest. No extra code needed.
LabVIEW Champion . Do more with less code and in less time .

ESS Timesheet error with Clock Times

Hi everyone,
Has anyone seen this issue? (ERP 6.0, EP 7):
Timesheet data entry profile is configured 'With Clock Times' and WITHOUT 'Release on Saving'. On the daily view of the timesheet, when clock times are entered and Refresh or Review is depressed, the number of hours is populated and the following error displays:
"Number of hours not valid when Start Time and End Time are entered"
This only displays:
- when the profile is configured without 'Release on Saving' checked. When it IS checked, the error goes away.
- from the daily view (no clock times on the Weekly View)
- in the portal timesheet, not via CAT2 in ECC
Any suggestions?
Thanks!
Message was edited by:
Frederic Wood

<u>Without checking 'Release on saving':</u> The system checks the number of hours value with the corresponding hours mentioned in IT0007.
<u>On checking 'Release on saving':</u> It overwrites the number of hours stored in IT0007 in the back end system.
This happens because this option has dependency with 'With Clock times' option. For this option, the system automatically deducts unpaid breaks, as determined in the employees's work schedule, when calculating the number of hours.
If this helps, pl do reward.
Thanks
Narasimha

About +ive Time Mgmt with Clock Time .

Hi SAP-HR Experts .
Plz give me idea about +ive Time Mgmt with Clock Time.
I maintained , Infotype 50 , (created from 01.04.2007)
When i tried to maintained Infotype 2011 . (from 01.04.2007) record is not created , it gives
warning (date is with in selection period) when i press Enter Key over it , No record is created in infotype 2011 .
I sat feature TMSTA = 1 .
In infotype 7 , i maintained Time Mgmt status = 1 .
I want to know what Time Evaluation Report (RPTIME00) will give to me ?
How do i confirm my self that now SAP-HR is running on +ive Time Mgmt with Clock Time.?
Please guide me ...
Regards : Rajneesh (9873607039)
Edited by: Rajneesh Kumar on Nov 18, 2008 6:02 AM

Hi Rajneesh,
When you run time evaluation through PT60 schema TM00 you will get the following:
1. Clock in and Clock out entry
All recorded time data documenting the actual attendance times or the actual absence times of employees.
Actual time has the opposite meaning of planned working time.
Example:
According to the work schedule, an employee is supposed to work from 8:00 a.m. to 5:00 p.m. on December 3, 1999 (planned working time). The actual time data (actual times) from this day is shown below:
8:00 a.m. to 2:30 p.m. Attendance
2:00 p.m. to 5:00 p.m. Absence - doctor's appointment
2. SKELETON TIME
skeleton time is a time account in which payment-related times of an employee are managed.
Skeleton time is determined in time evaluation.
Example:
Skeleton time in the standard SAP System consists of:
u2022     Attendance, absence, and off-site work within a contractual period (start and end of working time)
u2022     Overtime hours that exceed approved overtime
u2022     Paid break times
3. FLEXTIME
Working time pattern in which employees can individually determine their own start and end times, as long as a certain number of hours is worked within a defined period of time each day.
*4. FILL TIME
A specific period of working time described in time evaluation that lies within the contractual start and end of working time (excluding breaks).
If an employee works a flextime schedule and is also expected to be at work at certain times (core times), then fill time indicates the difference between the start and end of working time (without breaks) and the core times
5. PRODUCTIVE TIME
The usable working time for a resource. The system determines the productive time using the working time data and utilization rate for the resource as follows:
Productive time = (End of working time - start of working time - break
duration) x Rate of utilization / 100%.
You estimate the downtime at the resource using the utilization rate.
And the results of the following will depend on your settings...
Time evaluation will update the quotas and it will form time balances
I hope this information is enough to understand...for more clarifications revert to me..
Regards,
KPJ

Problem on Oracle11g2 RAC -- PRVF-5424 : Clock time offset check failed

I have a lot of file core wrrote every 6 hour and the same time of alert"node".log file show error about PRVF-5424 : Clock time offset check failed.
Yesterday I use this:
[root@hostname2 ~]# service ntpd stop
[root@hostname2 ~]# ntpdate
[root@hostname2 ~]# service ntpd start
in order to resolve but today the problem re-begin?
2013-04-17 20:23:06.063
CRS-10051:CVU found following errors with Clusterware setup : PRVF-5424 : Clock time offset check failed
PRVF-5413 : Node "" has a time offset of 69695.6 that is beyond permissible limit of 1000.0 from NTP Time Server "******"
PRVF-5413 : Node "" has a time offset of 69940.6 that is beyond permissible limit of 1000.0 from NTP Time Server "**
2013-04-18 02:23:08.973
CRS-10051:CVU found following errors with Clusterware setup : PRVF-5424 : Clock time offset check failed
PRVF-5413 : Node "" has a time offset of -1826.9 that is beyond permissible limit of 1000.0 from NTP Time Server "1***
PRVF-5413 : Node "" has a time offset of -1364.2 that is beyond permissible limit of 1000.0 from NTP Time Server "1**
2013-04-18 08:23:16.093
CRS-10051:CVU found following errors with Clusterware setup : PRVF-5424 : Clock time offset check failed
PRVF-5413 : Node "" has a time offset of -2698.5 that is beyond permissible limit of 1000.0 from NTP Time Server "1***
PRVF-5413 : Node "" has a time offset of -1998.7 that is beyond permissible limit of 1000.0 from NTP Time Server "1***

What is your OS name and version ?
In general you can solve these issues by configuring NTP service running on your cluster nodes to be synchronized with other NTP servers. For example on Linux please read "Oracle RAC and NTP" in http://www.oracle-base.com/articles/linux/linux-ntp-configuration.php#oracle-rac-and-ntp.
Edited by: P. Forstmann on 18 avr. 2013 13:35

Report governor? (CPU time, clock time, # rows, etc?)

Is there any sort of report "governor" function available in the
Reports Server or 9iAS (Portal) interface to the reports server
that would let me stop a report once it had used up a certain
amount of database CPU time or simply ran for too long ("wall
clock time")?
For certain times of the night (during data loads, etc.), I need
to be able to restrict some or all of our users from taking over
the CPU by running too many reports concurrently, reports with
too broad a set of parameters, etc. The SRW.SET_MAXROW
procedure might help a bit, but ideally I'd like to be able to
control this without having to change each report. (Also, I'd
like to be able to control this on a user-by-user, group-by-
group or time-of-day basis.)
TIA for any suggestions anyone can offer!
- Bill

hello,
there is no feature in oracle reports but you might look into
the database features, they might have something like that.
regards,
the oracle reports team --pw

Time valuation with and without clock times --- Plzz help

hi experts
Please help me by explaining the following.
1) Please explain me the differnces between time valuation with
   clock times(T555Z) and time evluation without clock time(T555Y).
2) Please explain the differences in time types and processing types and functions procedure used in time                evaluation with clock time and in time evaluation with out clock times.
3) What is the major differences in the schema between time evaluation with clock times and with out clock   time?
Thanx in advance for help and Points will be rewarded in full.
regards,

WITH CLOCK TIME
It processes time data that has been imported to the SAP system from time recording subsystems and data that has been recorded online. Those time events (in/out timing) will be stored in 2011 which will be used in schema processing.
Without clock time
to evaluate the time data of employees who enter only exceptions to the work schedule. Processing in this component assumes that times are expressed as the duration of work, and not the start and end times of work times and employee absences
Clock times are not required for evaluation of time data
T555y is used for processing work times (function Types)
T555z is used for breaks processing in time schemas (function Types)
2. NO difference in the way they are used
3. Schema TM00 (clock times) is a standard schema, used to evaluate employee time data that has been recorded at time recording terminals and that specifies clock times.
Schema TM01 is a standard schema used to evaluate the time data of employees for whom only deviations from the work schedule are recorded.

Payroll using time evaluation with clock times

Dear all,
I have configured an employee to have time management status 1, and my company would like to use attendance for time recording instead of time event since our clocking interface cannot provide exact clock times. I have also configured HRSIF to return 1 for all conditions.
I found every thing run correctly after creating the attendance records for all days of a payroll period while all attendance hours are equal to the planned work time. However, I have modified some of the days to attendance hours less than planned working hours (with no exact time inputted), I've noticed that the time evaluation can be processed successfully, but the attendance hours are not being calculated in the payroll result.
Does SAP actually support payroll for attendance with no exact clock time? If yes, what may I miss in my configurations?
Thanks
Steven

Hi,
Thanks for the advice.
For suggestion 1, yes, it can do I want if the attendance hours is actuall equal to the planned working hours. However, say I have a case that the planned working hours is 8, and a workman shows up for 6 hours and take 2 hours leave, the system still require me to enter the clock time in order to get the attendance and absence be calculated.
For suggestion 2, I understand that there's always be way if I do programming, however, my company decided not to do any customization, so I should first find if there's a default solution in SAP.
Thanks.
Steven

Register exact clock times (4 digits) instead of half-hour increments in Record Working Time (Calendar User Interface)?

Hello
Is it possible to register the exact working times in the HRESS_A_CATS_CALUI WDA instead of half an hour increments?
Now:
choose between 0800 to 0830
Need:
0810 to 0825

In calendar interface, standard is 30, but if you need 15 etc you need to a modification etc, use the normal interface with clock times or in details screen you can enter clock times enable fore the cats profile using CAC1 http://scn.sap.com/thread/3678682

Can the iphone 5s display two clocks/time zones on my lock screen?

Can the iphone 5s display two clocks/time zones on my lock screen?

Sorry, no.
If you'd like to see this as a feature, tell Apple:
http://www.apple.com/feedback/iphone.html

IT 2002 is reducing .5 hrs when we enter clock times

Hi,
I was trying to enter clocktimes in IT2002 for all my entries. But though an entry should be for 5 hrs (07:30 - 12:30) system still shows 4.5 as total hours recorded. I think this is happening due to Break schedule configured in DWS.
Do any one know? how to define a break schedule but IT2002 should not deduct this break when clock times are entered???
Quick reply is appreciated.

Hi Prakash,
yes it is Bcoz of break schedules, do one thing create a time type and assign in V_T555z table with ur groupinmg in time type 3 and in Processing type as S or P.
this will take the breaks into consideration during time evaluation.
I think this will solve ur problem
Reward points if helpful
Srinivas

Clock/Timer/Alarm for iPad

I just got my new iPad and am disappointed it doesn't have the iPod clock/timer/alarm. Does anyone know of a good app that will turn my iPad off after a certain length of time? Like if I fall asleep using something on my iPad?

DaddyOFTheMacDaddy wrote:
Check the app store. The one I use most is 'ambiance', but there are several clock (free) apps available that do specifically what you're asking.
Good luck
They don't run in the background.

How to add/create Clock, Timer, Timecode or Countdown

Hi all,
I've just tried to find in these forum, with google etc. but I just can't find a way:
What do I like to do?
How to add a time/clock/timer/timecode, visible in the picture with
Minutes:Seconds:Hundredth (or Frames 25/30/60)
"xx:xx:xx"
Samples:
Here's a sample how I'd like to do it:
http://www.youtube.com/watch?v=ajNXfx4FBOI
At the moment I am trying my best with some bike racing footage like this:
http://vholdr.com/video/afm-race-round-5-650-twins-2009-full
Goal:
http://www.youtube.com/watch?v=Lha_ZqWxCJA
Can anyone help?
Regards,
Marc

Hi all,
here my results.
You can install it.
It shows up in Effects.
But as soon as you've put it in - Premiere Elements 8.0 crashes.
It even shows implemented time in the preview, but as soon as you work with it for more then 2-10 seconds it let's Premiere crash.
Seems like we have to wait for an update from the developer.
Regards,
Marc

QuickWeb Clock Time

Similar Messages

Maybe you are looking for