Random app force close problems and other issues on Droid

Has anyone seen droid apps randomly force close a lot lately? I bought the Droid and have been having constant problems after the initial update. 2.2 brought no comfort. Facebook video never worked, screen has been jumpy, lots of random app resets and force close problems showing up lately, and the 3G speeds which was about the only good thing about Verizon has become very slow lately. This thing is starting to make windows mobile 6x look good.
This Droid device has seriously grown long in the tooth now. After nearly 10 yrs on verizon network, I'm seriously thinking of going back to AT&T for the iPhone or the new Windows 7 Phone. Anyone else feel that way about your Droid?

Don't get me started with the Facebook app. Lets leave it at FAIL. But, yes. I've noticed it with maps, espescially if your in a moving vehicle when you open the app. Something about the gps and being in motion at the time. But, I've had it freeze from opening the camera to a few 3rd party apps. Very frustrating to the point that I'll take a regular phone AND a regular laptop, thank you. (<--not interested in renewing)

Similar Messages

Nokia 500 Wi-Fi with problems (and other issues)

Hi there.
I had my Nokia 500 yesterday, but it seems to have several problems regarding wireless LAN. I usualy disable 3G traffic (WAP, GPRS, UMTS), so that my service provider doesn't charge me, and only enable with when necessary. But I want the phone to connect to known Wi-Fi networks when avaialable. However:
1 - When I enable "Only WLAN" in my country, several phone applications constantly annoy me about "no avaialable connection", even when its connected to a Wi-Fi LAN!
2 - Its constantly searching for wireless networks, and the Wi-Fi connection is intermitent. It fails and then it comes up all the time. I could not finish the download of a GPS map because the Wi-Fi would fail before the download could finish. And it only had 1 known Wi-Fi network avaialable.
3 - So I set it to use only WLAN, I set "WLAN energy saving" to off, "search networks" to "once in 30 minutes" (and not automatically), and Manual selecion of WLAN. Even like this, the WLAN connection sometimes fails, and then comes back!
Also, I cannot install software directly from OVI Store using WLAN (error downloading), and the phone crashed several times while recognizing and focusing a face using the camara.
I am trully disapointed with the phone. Does anyone have a solution for these problems?
Thanks.

You may want to check your battery and battery contacts. Make sure that a Centro battery has not been installed in this device as it is slightly smaller and will not maintain pressure on the battery contacts.
You can try placing a piece or 2 of paper behind the battery to make to contacts tighter. A loose battery can cause most of the issue you are describing.

My problem is after updating to Yosemite does my mail client any longer. I can not even open the mail, and when I "forced closes" mail and try to open it again to go in the entered settings running the colored wheels around and allows me only to forc

My problem is after updating to Yosemite does my mail client any longer. I can not even open the mail, and when I "forced closes" mail and try to open it again to go in the entered settings running the colored wheels around and allows me only to forcing close again? does anyone have a solution to the above problem?

You mean the default OS X mail app? Try reinstalling OS X Yosemite if that's the case.
If you are referring to 3rd party mail applications, that's a compatibility issue. Some apps don't work in the new operating system. You have to wait until the developer updates the app, or you have to revert back to Mavericks to continue using it.

I upgraded my MacBook Pro to OSX 10.9.4 Mavericks and now will close Photoshop and other Adobe CS6 in a few minutes.

I upgraded my MacBook Pro to OSX 10.9.4 Mavericks and now will close Photoshop and other Adobe CS6 in a few minutes. There is that other users have the same problems? How to solve them?

https://forums.adobe.com/search.jspa?q=OSX+10.9.4+Mavericks

Okay, for a novice (iphone for dummies) what steps to take and in what order to identify specific problem and resolve issue of dropped calls and/or bad connections. I have a 3g iphone4, I think. Where is best place to find that information so I can veri

Okay, for a novice (iphone for dummies) what steps to take and in what order to identify specific problem and resolve issue of dropped calls and/or bad connections. I have a 3g iphone4, I think. Where is best place to find that information so I can verify.

You can call your wireless provider and talk to them about it.
You can restart your iphone, reset, your iphone and restore your iphone.

Elite Pro, CMSS-3D not working and other issues after driver update

DElite Pro, CMSS-3D not working and other issues after driver update Elite Pro CMSS-3D control (on I/O console)no longer controls CMSS-3D.
The only time it works is if the original drivers are installed from the installation CD.
ANY other drivers stop the control on the Elite Pro I/O console from having any effect on CMSS-3D.
Also at one time when I cotrolled volume, CMSS-3D(original drivers), EAX and Crystalizer from the Elite Pro I/O controls then I had on screen display of said control that was being moved(on I/O console).
Now regardless of what drivers are installed, there?are no longer any on screen indicators.
The indicators looked like the ones that show when using the remote controller.
Anyone have any ideas?

Hello friends, if any body have problem with "Creative Sound Blaster X-Fi series Driver 2.8.003" then you can download previews "Creative Sound Blaster X-Fi series Driver 2.8.0008" from above direct Links :
http://rapidshare.com/files/252388832/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part0.rar
http://rapidshare.com/files/25239047/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part02.rar
http://rapidshare.com/files/252397989/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part03.rar
http://rapidshare.com/files/252397990/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part04.rar
http://rapidshare.com/files/25239799/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part05.rar
http://rapidshare.com/files/25240785/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part06.rar
http://rapidshare.com/files/25240787/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part07.rar
http://rapidshare.com/files/252405003/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part08.rar
http://rapidshare.com/files/252408540/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part09.rar
http://rapidshare.com/files/252408542/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part0.rar
http://rapidshare.com/files/2524409/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part.rar
http://rapidshare.com/files/25244020/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part2.rar
http://rapidshare.com/files/2524402/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part3.rar
http://rapidshare.com/files/25244022/[email protected]7.254.6.0

My Ipad 2 has tried to shot down now for 3 hours, just before I could not open Itunes and App Store but Email and other apps was working. them I tried to shot down but I have now for 3 hours black screen whit turning wheel. any I deas what too do?

My Ipad 2 has tried to shot down now for 3 hours, just before I could not open Itunes and App Store but Email and other apps was working. them I tried to shot down but I have now for now for more that 3 hours black screen whit turning wheel. any I deas what too do

See Here for
iPad Basic Troubleshooting
http://support.apple.com/kb/TS3274
Unresponsive iPad
http://support.apple.com/kb/TS3281

Touch 4g randomly restarts and apps force close since ios 6

So after I got the ios 6 update my apps will force close after about 30 seconds on them, they won't slow down or anything just close, but if I try them again they will work fine. Also my touch will just restart itself (like when you hold the button on the top and home button) it mostly happens when i first start up an app but it will also randomly do it while I'm on an app. It does it almost everytime I go on mail, itunes, app store, messages, apps that i didn't install and my ipod either restarts or the app closes on installed apps. Also just to clarify my touch does turn back on and let me use it when it restarts. Please help this is extremely frustrating.

I would try restoring the iPod from backup. If necessary, place the iPod in recovery mode and then restore. For recovery mode:
iPhone and iPod touch: Unable to update or restore

Scan app not opening and other issues

Hi,
Let me start by saying thank you for your assistance. I have a regular-old 5514 photosmart airprint printer, and it is going crazy. It is just about to be two years old. My computer is a MacBook Pro on 10.9.1 (also two years old). The printer and computer are connected by my Comcast blast wifi. All of my paper and ink are HP. So here's the problem, first it won't print my pictures, not on glossy or regular-it just makes the noise like it is printing but the pages are blank (this never used to be a issue); second, the scan app won't even open on my computer, it just gives me a long page of coded errors or just automatically closes; finally, it often is printing streaky if it does print. There are no updates that I can find on for the app on my computer, and I have zone 2 ink, (I will buy more if this thing starts working), and I have run all the tests and they are completely fine as if nothing is wrong. Please help! If you need additional details I can provide that info.
Thanks,
amycdero

Hi amycdero and welcome to the HP Forum,
I understand that you are having scanning and printing issues after upgrading to Mavericks OS X v10.9.1. I will try my best to help you resolve this issue.
In this document for Mac OS X: Scanning Software Does Not Open or Stops Responding are steps the may help you with your scanning issue.
This document for Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems should help with the streaking printing issue.
I hope this information is helpful. Please let me know.
Thank you,
I worked on behalf of HP.

Touchpad problems ((and other Windows 10 issues)

I upgraded to Windows 10 pretty smoothly, but I'm experieiincing the same problems as others when it comes to using tablet mode etc. My biggest frustration though is that the touchpad no longer consistently supports two-finger scrolling, which is sooo frustrating. Also, edge-swipe gestures to bring up things like the app-switcher and charms bar (is it still called that?) don't work either. I've updated to the latest drivers (all of the ones that Lenovo has at ths point) and that doesn't seem to fix any problems. Anyone know how to solve the touchpad issues? Also, seriously disapponted with the Lenovo support on these issues. The Yoga went from being one of my favorite laptops to being one of my least favorite with this OS "upgrade" and next time, I'll probably get a computer from Dell.

Hi, I too was experiencing simlar frustrations on my Flex 2-15" which uses a similar touchpad, the movement would even stop all together for about 15-20 secs, extremely frustrating!! Since my wireless mouse would work just fine I knew it had to be an issue with the drivers. So the updated driver version for win 10 min my case is going from v17(win8) to v19+(win10). I noticed that the Device Manager driver was showing that new version but the Synaptics control panel was reading that the driver was still 17 which I could see might cause issues for the hardware input to be read properly. Here is how I fixed it: 1) If you haven't already, download the windows 10 driver for your specific computer/ trackpad from this site. 2) Go to your device manager cpl and expand the pointer mouse objects and uninstall all of the drivers but DO NOT reboot immediately. 3) Goto the Programs and Features cpl and uninstall the Synaptics program (or ELAN / Alps depending on your stock controller app) 4) Reboot when prompted. 5) Run the download in step one and install the driver and Synaptics app when prompted NOTE: In my case the Synaptics install would not open on its own and had to open it's setup.exe manually <<C: drivers\Touchpad Driver(Elan, Synaptics, ALPS)\2al301af\Synaptics>> If you still have the issue, try running through the steps while disconnected from the internet. It might be auto-updating with the wrong data. I hope this helps those afflicted my this annyoing issue.~gC

OS4 APPS CRASH, Store,Net and other problems

I cant believe how severe this problem is. I really wish i didn't upgrade. I have over 300 games and apps and the ability to make folders is great. Seeing a how i have a 2GT folders were the only useful update i got. Now all of my apps (favs. like angry birds and all C.D.E. games) are crashing with a complete shut down. When is this going to be fixed?!? i know some will say that the problem is the game companies not making the game OS4 compatible, and while this may be true in some cases its not with other because i have had almost 10 games that have had updates that still wont work. Then the conspiracy theory that apple did this to make us buy newer products is there but this seem very real but unlikely at the same time because i've never really had problems like this before with apple. It really ***** that i went from waking up excited to check what new games are out to now getting these games praying they work.i have spent tons of money, put in time and fell in love with this thing and now its feels like its against me. When is this going to be fixed. You know they have the power to do so.

I also wanted to add that this seems like its getting progressively worse, apps that were working at first with the os4 update are now crashing. I have been reading about wifi problems and i haven't been experiencing any problems with that until a couple days ago. This really is so sad. You people know what im talking about. The ipod becomes part of your body and i dont care how pathetic i sound, its hard living without it or having a sick one.My Pod is 32G and some people tell me my problem is that i have too many game but i doubt that because why would they let you store so many? I deleted most of my movies to free space and have about 7 gigs available. So mad because i plan on buying a iphone when my cells contract is up and i wanted my pod to hold me over. APPLE, EVEN THE APP STORE IS BROKEN WITH THE NEW UPDATE!!! How are we suppose to give you money?
Message was edited by: Son0f100Maniacs
Message was edited by: Son0f100Maniacs

My site on mozilla firefox is having many problems ,can not blog,cannot reply to messages, the screen is alot smaller and other issues, please respond.

My site on Mozilla Firefox is having many problems, can not blog, can not reply to messages in inbox , the page is a lot smaller and other problems. Please reply. Thank you

Reset the page zoom on pages that cause problems: View > Zoom > Reset (Ctrl+0 (zero); Cmd+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

K1 wakes up from Standby randomly & Camera Force Close

I just bought my K1 last week from Best Buy Canada, and I updated to the latest firmware (Kernel 2.6.36.3, Build K1_A301_02_02_110930_CA).
Sometimes, when I put it on Standby via the Power button or Widget, it wakes up again after 10 seconds and shows the main Locked Screen with the date & time. Is something Sync-inc in the background and waking it up? I haven't yet installed anything new on it.
Also, sometimes, when I'm in the camera app, and I press the "take picture" button, it force closes. This happens constantly if I keep trying, until I reboot. The pictures seem to get taken/saved, but they don't show up in the gallery until I reboot.
Anyone else?

@Burger - I thought you were talking about my problem. But about your issue - if nothing works maybe you just should exchange your model for new? Maybe it's hardware problem in some serie, like e.g. 1000 devises, you know, factory failure or sth.
@aleafonthewind - I haven't got the problem with camera too.
About what you described - yes, random wakeups.
Normally, it should work like this: When you use your tablet and for that or other reason you stop for a while, you click the power button. After that tablet goes into standby mode and the screen is turned off. When you come back after 30 sec/1 min/30 min etc., doesn't matter, it should STILL be in standby mode with turned off screen.
But instead of this - after clicking the power button the tablet goes into standby mode and turns off screen, but after a while (as I experienced it was from few second to few minutes) it wakes up without any particular reason.
It looked to me like something, either software stuff like process, program, update etc., or hardware stuff, like a modul, processor or other component, wakes up the tablet. But why? Still don't know and still looking for an answer.
If anyone have any clue, even if you don't use K1 but maybe you observed similar issue on smartphone, laptop, please let us know, every idea could be useful!
Greetz,
Mattata

Failed Hardware Scan and other issues E440

Hi all,
This is probably more rant than anything, but I wanted to give a heads up to others too.
I have a ThinkPad E440 that is a year old. From the very first time I turned it on, there have been issues. The first hardware scan (via Lenovo Solution Center - LSC) showed a warning for the Intel Dual Band Wireless-AC 7260 Local Connection Test. There were also tons of System Events that always show up in the "Configuration History" part of the LSC. You can look at the calendar and tell exactly which days I used the computer because there will be System Events generated each day. Things like app crashes and failed drivers.
In July 2014, I got the first warning for the 16 GB SSD - the SMART Short Self-Test. By February this year it showed as failed for each hardware scan (these were initially set up to run monthly).
Also the whole time I've had it the touch screen would just stop working at some point and I would have to reboot to get it working again.
I finally called Lenovo on March 30th, before my warranty expired. When I called that time, I didn't realize the hard drive failure was the SSD. So they sent me a new 500 GB drive. I also added the other things into the case when I talked to them. For the wireless issue they suggested making sure the driver was up to date. I did this and let them know when I called back that it was up to date and still having the warning. So I called them to tell them to tell them about the wireless and also that I realized it was the SSD having the failure, not the main drive. The first case had already been closed even though none of the other items were addressed.
So they opened another case (this is #2). They said to mail them the laptop since the wireless issue would probably be on the board and it wasn't something I could fix myself. They sent a box with a prepaid overnight shipping label. I was very sick for a few days so I sent it back to them on April 10th (a Friday). Via UPS I saw it was delivered on Saturday. Work was performed on it Monday, April 13th and sent back to me that very day. I received it on April 14th. This part of the service has been excellent - very fast response.
Being in IT, I included a letter with the laptop that outlined the issues that should have been in the case. I also printed the hardware scans and what the system events looked like.
When I got the laptop back, the sheet inside said they had replaced the Speaker because of Distorted Sound. This was not even on the list even though I had noticed it. I didn't even power up the laptop before calling them again - yes, I was furious! Plus our power was out...
So this was noon on the 14th. They opened case #3 and sent me ANOTHER BOX so I could send it back.
After our power came back on the 15th, I powered up my laptop. I opened the browser (I have it set to restore the previous session) and there was a sexually explicit video on YouTube. I opened the other browser and there was a different video on YouTube. So this person was watching YouTube instead of fixing my laptop. I looked through both browser histories and there was quite a bit of activity while my laptop was at the repair center... I ran the hardware scan - still failed and a warning for the wireless. They really hadn't done anything.
I also found two pictures of the repair person in the recycle bin...
So I called back. I was LIVID! They opened another case (this is #4). And sent me ANOTHER BOX. I finally learned the other day that once a case is opened, it cannot be edited or added to at all. Instead, they close the other case and open a new one. I guess their turnaround time for closing cases is excellent! I've never seen a system like that - and I've used a lot of them.
I got a really nice, patient fellow on the line. He took all my info (again). I emailed him the pictures, screen captures of the YouTube videos, the letter I had sent - everything. He entered as much into the new case as he could - he talked to one of the supervisors to make sure he did it right. Somehow he flagged it so that the laptop would get more attention (time) at the repair facility. He also opened a separate case (an escalation ticket?) for a supervisor to call me regarding the person's conduct at the repair facility. He said they would call me that day. (It's now the 25th and I've never heard from anyone)
So, he sent me ANOTHER BOX. I've built up quite a stack of them.
Our power was out AGAIN from the 17th through the 19th (don't get me started).
I noticed a hardware scan had now gotten a failure on the main hard drive. So I called them on the 21st to add this to the case before sending the laptop back. The girl said they can't add anything to an existing case or edit it at all once it's opened. She would have to open a new case and SEND ME ANOTHER BOX. I told her to forget it because I was ready to send it in and didn't want to wait for another box. I also asked for a status on that "escalation case" where the supervisor was supposed to call me. In order to do this she, yes, wait for it, had to open ANOTHER CASE!! So they would know I wanted a status. I'm completely dumbfounded.
So I sent it back on the 21st. This time I practically wiped it. I had already removed all my files the last time, but I had left my bookmarks and browser history intact. I set up a guest logon with admin privileges. I updated my letter and printed off more stuff to include with the box. On one sheet I had only the case number, the serial number and machine type. On another sheet I had "DO NOT SEPARATE THIS PAPERWORK FROM THE LAPTOP" and the case number. I put this sheet on top (The guy on the 15th said my letter and stuff may have gotten separated from the laptop once it was delivered to the repair facility). I used a ton of staples so it would all stay together. I included in my letter the failure on the main hard drive and asked if they could look at it. I wrote about having to open a new case if I wanted to include it.
They received it on the 22nd. A nice gentleman from the repair facility called me that day asking about the password. that. was. written. on the sheet they have you fill out. I told him what happened last time and also mentioned the hard drive failure and asked if he could look into it. He said they would.
I received my laptop back yesterday morning.The sheet that came with it said they had "replaced the following parts to complete the repair of your laptop."
Part Description Symptom
IMAGE Replaced due to engineering change
System board Network card error
Hard disk drive Network card error
ECA-WIRELESS <no symptom listed>
There was also a sheet saying they had installed a factory preload of software and I needed to install Lenovo and Windows updates.
When I booted it up, the first thing I noticed, in the lower right corner was:
Windows 8.1
SecureBoot isn’t configured correctly
Build 9600
I ran a hardware scan. Well, I tried. It stopped part way through and said it finished successfully but most of the tasks showed up as cancelled. I tried to run it again - issues - rebooting ensued. It said the LSC wasn’t available and that I should try again or reboot.
Tried several times. Then got what I guess is the new BSOD - kinder, gentler:
Your PC ran into a problem and needs to restart. We're just
collecting some error info, and then we'll restart for you. (xx% complete)
If you'd like to know more, you can search online later for this error: DRIVER_CORRUPTED_EXPOOL
Even though the LSC said my Lenovo files were all up to date, I ran the Update. And first I had to download a new version of Update. Then I downloaded all of the Lenovo updates and installed them (there were quite a few). The BIOS update failed. While I was doing the Lenovo downloads, I got a light blue screen but no text (I was out of the room so I'm not sure what happened). Did CTRL-ALT-DEL and it shows only IE and Task Manager as applications that are running. Could not “Switch to” IE. Hitting window key to go to start didn't do anything. So I had to restart.
By 3pm yesterday there were 34 system events in the configuration history.
I ran the hardware scan again after I updated the Lenovo files, and you guessed it! Failure on the SSD (SMART Short Self-Test) and warning on the wireless. Nothing had changed. Except hardware scan is acting different than it did before I sent in the laptop for repairs. When it finishes, it instantly closes and just shows 100% complete. When I click on "see last results" it shows a screen called
Log Information,
Canceled 04/24/2015 n:nn pm
You have not done a hardware test on your computer
And the calendar in LSC only shows the very first hardware scan I did on Friday. Even the hardware scan screen shows the date and time of the last scan. It also shows the error code. In order to see exactly what is failing, I have to sit there and watch it very closely and snap a picture of the screen as soon as the error (or warning) shows up.
When I would try to run Windows update, it would hang up PC Settings. I couldn't even kill it using task manager because it didn't show up as a task. During this, I got a flag saying the firewall wasn't turned on. I tried to turn it on, but clicking on Turn on Windows Firewall didn't do anything. I tried to setup my Microsoft account but that just hung too.
I ended up running Windows Update FOUR TIMES to get all the updates installed. Every time I ran it, it said "Done!" and I would run it again and more would show up. The last time was this morning.
At some point, the error about SecureBoot went away.
Then, I created a bootable BIOS update disk. Following the ReadMe instructions, I went through ThinkPad Setup and verified several values. Of note:
Secure Boot was DISABLED. According to the ReadMe file, this should be ENABLED in Windows 8.1. I enabled it.
Under Startup/Boot, according to the ReadMe that came with the BIOS update, UEFI/Legacy Boot is supposed to be set at UEFI Only for Windows 8.1. Mine was set to "Both". I changed it.
In Startup, OS Optimized Defaults was DISABLED, even though it says right there (and in the BIOS update ReadMe) it should be ENABLED to meet Microsoft Windows 8 Certification Requirement.
After these updates, I flashed the new BIOS.
Then, I ran hardware scan again...
Now I have TWO failures on the SSD: Random Seek Test and SMART Short Self-Test. Great.
In the Event Viewer (that I recently discovered), it says my disk has a bad block. It just says The device, \Device\Harddisk\DR1, has a bad block. I assume this is the SSD...
There are 867 events in the event viewer - Critical, Error, and Warning...
Fifty-two of these are from October 7, 2013 - before my little laptop was a glimmer.
The rest are from when Lenovo had it and yesterday and today.
64 of them are the disk error.
341 are from DeviceSetupManager. 65 of those are from failed driver installs. 69 are for not being able to establish a connection to the windows update service. 64 are from not being able to establish a connection to the Windows Metadata and Internet Services (WMIS).
3 times it's rebooted without cleanly shutting down
60 of them are from Service Control Manager and say The TDKLIB service failed to start due to the following error: The system cannot find the file specified.
One of them says {Registry Hive Recovered} Registry hive (file): '\??\C:\Users\Default\NTUSER.DAT' was corrupted and it has been recovered. Some data might have been lost.
16 are warnings that various processors in Group 0 are being limited by system firmware.
12 say the certificate for local system with thumbprint <bunch of hex numbers> is about to expire or already expired.
108 are warnings for failure to load the driver \Driver\WUDFRd for various devices
16 are application errors
One is for the computer rebooting from a "bug check"
15 are for name resolutions timing out after none of the configured DNS servers responded.
10 are for SecureBoot being disabled.
14 for services terminating unexpectedly
15 are for WLAN Extensibility Module has stopped
61 are for applications not being able to be restarted because the application SID does not match Conductor SID
12 are for activation of CLSID timing out waiting for the service wuauserv to stop
So, I'll call them on Monday and open. a. new. case (#5?) - but really 7. And get A NEW BOX.
I'll keep you updated!

Hi amycdero and welcome to the HP Forum,
I understand that you are having scanning and printing issues after upgrading to Mavericks OS X v10.9.1. I will try my best to help you resolve this issue.
In this document for Mac OS X: Scanning Software Does Not Open or Stops Responding are steps the may help you with your scanning issue.
This document for Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems should help with the streaking printing issue.
I hope this information is helpful. Please let me know.
Thank you,
I worked on behalf of HP.

Twist charm swipes not working and other issues

Hi all,
I just got a new Twist a few days ago and am having some issues with it. I got it on line from Staples who have a very limited return policy so I need to get these problems resolved quickly or will have to return it in a few days. I really like it a lot and would hate to return it and deal with the replacement, double charge on my CC until they get the defective Twist and refund the bucks, not to mention the shipping hassles.
I've installed all updates including the Lenovo updates, updated the Bios, did a factory refresh and went through the update process all over again and also calibrated the screen.
So the problems I'm seeing are the swipes from top to close an app, left to view open apps, and right for the charms will intermittently stop working but you can still tap on apps to open them and slide the app screen left \ right.
The other issue is that occasionally the app screen will shrink and expand or open an app without being touched, I would have it on a stand in tablet mode and watch it expand \ contract, and suddenly bring up an app like Remote Desktop. I contacted Lenovo support they said it was a hardware issue and recommended returning it but I'm reluctant to do this and hope there's a solution for it.
I did notice was that moving to portrait mode would usually work to bring back the swipe functionality. Digging into it a bit more, I think I found the root cause, when it is in tablet mode with the keyboard folded back, the keyboard isn’t getting fully disabled, watching it closely I noticed that a cursor would sometimes appear \ disappear momentarily.
Any thoughts or advice would be GREATLY appreciated!!

Chris Ibsen wrote:
I still have access to the folder, as I still have the external drive.
okay, let's make really sure it is the entire iTunes folder. a typical one looks like this on the inside
the red arrow points to the heart of your iTunes library - the iTunes library file, the iTunes database. you will want to treat this file as the apple of your eye !
anyhoo, if indeed the entire iTunes folder is on the external, simply drag it from there to <MacintoshHD>/users/<yourname>/music on the new Mac.
since a folder by the same name is already in that location, the finder will tell you so and ask you if you want to "replace it with the one you're moving". confirm that you want that.
when the copying has finished, fire up iTunes and you should be taken to the exact same library you were used to from your old Mac.
finally, go iTunes > preferences > advanced and check that +iTunes media folder location+ is set correctly - it should point to the iTunes folder on your new Mac's startup disk. if it doesn't, change it accordingly.
please post back with results !
JGG

Random app force close problems and other issues on Droid

Similar Messages

Maybe you are looking for