Random blue screen - all programs fail at once

Hi everyone,
My MBP 7,1 has been frequently and randomly crashing. When it "crashes" a blue screen is displayed for only a few seconds, after which the computer displays my desktop with all programs closed. In otherwords, all the programs that were running crash, the screen turns blue and then it returns to my desktop. The problem makes it impossible to word process (or do anything, for that matter), because all informaton is lost when this occurs. There doesnt seem to be anything in particular that is causing the computer to do this. Any suggestions?
Thanks!

If it's under Apple Care, I would be taking that in immediately.
It sounds pretty serious to me.

Similar Messages

Portege R100 - Random Blue Screen of Death (IRQL not less or equal)

Hi,
I've been getting random "Blue Screen of Death" screens in the last few weeks. The error is "IRQL not less or equal" and it's performing a memory dump every time. If I get the error and try restarting the laptop after, I usually get the same "Blue Screen of Death" screen when booting.
I didn't install any new hardware lately. Last upgrade was about a year ago; upgraded the memory. I've tried replacing the RAM with a spare one I had and I was still getting the same error.
I didn't install any new software in the last weeks that would coincide with this error.
I'm monitoring the CPU temperature and I doesn't go higher than 48 deg Celcius.
I'm not an expert but I would assume this is purely an hardware problem ? Since I rarely hear the CPU fan, I thought it could be the CPU overheating.
But even after making the CPU fan run at 100% using a freeware called "Speed Fan" I was still getting the same random "Blue Screen of Death" screen.
I would really appreciate any feedback and help. I really like my R100 and would like to fix it.
Mark.

Hello, I have a Portege R500 and I am also too having this error message. I was getting a blue screen when loading the pc advising of a memory dump issues.I ahve replaced the ram inside the laptop and this has failed to resolve the issue. I am now having the error, IRQL not less or Equal everytime. I have run a memtest86 scan and this did show up possible memory issues. SO I have replaced the memory chip again. Still showing up as memory issues.
You have mentioned this could be a cpu or memory controller. If this is the memory controller can this be replaced? or would a motherboard replacement be the best option?
I have not tried a re install of windows 7 32 bit as yet, As the memtest86 program has identified possible memory issues. Please can some one advise if replacing the cpu and possible memory controller would resolve this. Memtest log available if wanted.
Regards
John Powell

Random Blue Screen

My apologies if I have posted this in the wrong thread.
I have a Toshiba Satellite A505-s6035 Notebook Intel Core i7 720QM(1.60GHz) 16" 4GB Memory DDR3 1066 500GB HDD 5400rpm DVD Super Multi NVIDIA GeForce GT 330M.
I've been having issues with random blue screens and I'm never running a specific program when they occur. I have run a memory diagnostic and checked my hard drive for errors with no problems found. The blue screen reports that I have saved are as follows:
Problem signature:
Problem Event Name:                        BlueScreen
OS Version:                                          6.1.7600.2.0.0.768.3
Locale ID:                                             1033
Additional information about the problem:
BCCode:                                               7f
BCP1:                                                    0000000000000008
BCP2:                                                    0000000080050033
BCP3:                                                    00000000000006F8
BCP4:                                                    FFFFF80003491EC0
OS Version:                                          6_1_7600
Service Pack:                                       0_0
Product:                                               768_1
Files that help describe the problem:
C:\Windows\Minidump\100110-23353-01.dmp
C:\Users\S D Pearcy\AppData\Local\Temp\WER-55817-0.sysdata.xml
As econd report had these details:
Problem signature:
Problem Event Name:                        BlueScreen
OS Version:                                          6.1.7600.2.0.0.768.3
Locale ID:                                             1033
Additional information about the problem:
BCCode:                                               7f
BCP1:                                                    0000000000000008
BCP2:                                                    0000000080050033
BCP3:                                                    00000000000006F8
BCP4:                                                    FFFFF8000349CEC0
OS Version:                                          6_1_7600
Service Pack:                                       0_0
Product:                                               768_1
Files that help describe the problem:
C:\Windows\Minidump\091910-26348-01.dmp
C:\Users\S D Pearcy\AppData\Local\Temp\WER-53820-0.sysdata.xml
Any help would be greatly appreciated.

Satellite A505-S6035
Bug Check 0x7F: UNEXPECTED_KERNEL_MODE_TRAP
Attach the following file to your reply. (To satisfy forum requirements, you must add the .txt extension.)
   C:\Windows\Minidump\100110-23353-01.dmp
I don't trust a memory check unless you run it all night.
-Jerry

Just tried to load cnet antivirus software, now computer comes up as a blue screen, no programs. Help

just tried to load cnet antivirus software, now computer comes up as a blue screen, no programs. Help

Hello amber3379,
I see that you are having start up problems with your HP computer. I have a couple of suggestions that may help with this issue.
I would first suggest trying the system diagnostic option "F2" when starting the computer. This will allow you to test the hard drive, memory, and run a start up test.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Random blue screen crash

Neo2 platinum Nforce 3 ultra
AMD [venice] 3500+
OCZ Dual channel 3200 2x 2x512 cl 2.5-3-3-7
PSU FSP group 350w
MSI 6800GT 256mb
160gb Hitachi deskstar SATA
XP PRO
Please help - Built this setup from new, Gcard and HDD used from old system. I used origianal installatioin on HDD to start with and when windows was loading up i got a
blue screen error for a split second and then it would restart but i was able to start in safe mode.
I then re-formatted and everything appeared to be working fine. I installed a few basic programs like winrar, firefox, Adware, Norton etc and out of nowhere i got the error and restart again it then happend on windows loading again and even in safe mode and selective startup. I was also able to load windows normally when it let me but it would restart with the error
quite randomly.
CPU temp is stable and ive run memtest86 which was fine. One thing i have noticed in bios is my ram was recognised as 333 intead of 400 which i changed but to no effect I am even writing this post on this very system praying it wont crash on me.
Any Ideas??? Thanks in advance.

What toms tested !
What Xbits said !
What MSI say ! : As for ram your running double sided ? in green slots ? this will set the speed to 333Mhz.
It could be the combo of running a 6800GT + 3500 (even though Venice's are not as power draining as other A64 core's). The 6800GT needs 4 pin power, is there any other part on the same cable from the PSU ? Try it with only that on one cable. Have you tried prime 95and HD-tune! . I would also try update to the newest nforce drivers and BIOS then test each stick of ram 1 by 1.
Best to check out options before upgrading to a new PSU, because if it not the PSU your problem will still be there. And your bank balance that bit lighter. Then again PC's have a way of making endless holes in your pockets.
Good luck !
2550 ;-)
Quote
Not all PSU are equal.
Quote
After all when it comes to power, it is better to be safe than sorry.
Ineed
Quote
Quote from: bassmadrigal on 13 August 2005, 01:17:13 pm
Good thing Antecs are above average.
Power Supply Requirements & Selection
Good Luck
Jeremy
Quote from: rogueUK on 13-August-05, 21:09:40
Indeed, I only got 1 PCI-E X16 so I don't need as much juice lucky me
MAX power out put is no real match for good clean power/AMPS down the rails which the system needs.

Opening Word-- blue screen-- all applications shutting down?

Hi everyone! Today I closed my laptop to put it in sleep mode, it was not connected to power.
I came back an hour or so later, opened it up, and entered my password to log in. It started to log in and then I got a blue screen! In a few seconds it brought me back to my desktop, but all of the applications had shut down and Mail (which starts automatically) was opening and asking me for my passwords.
I thought that was weird behavior so I got my external hard drive and attempted to back up my computer. I started Googling the problem and then Safari randomly quit. I tried to email a paper I'm working on to myself, and I got the blue screen again! I plugged my computer in, hoping that would help. However, I got the blue screen two or three times before I was able to get a current backup. Each time the blue screen popped up, all of the applications would be shut down by the time the desktop came back.
EDIT: Ok, it definitely seems to be a problem with Microsoft Word. Every time I open it, the blue screen comes up! Such a pain. I'm going to Google it and try to work this out, but if anybody has any insights please let me know!
SECOND EDIT: Sorry to be such a pain, but I thought I had figured it out and then it happened randomly again! If anyone has dealt with this before, please let me know!
Message was edited by: mmmeredith
Message was edited by: mmmeredith

If the problem only occurs with MS Word then it's clearly a Word issue. Please repost at the MS Office forum located at:
http://www.officeformac.com/productforums/
Roger

Macbook won't boot up blue screen, volume check failed

Yesterday, my friend's Macbook wouldn't boot up properly. First it came up in terminal mode with the following message displayed:
disk0s2: 0xe0030005 (UNDEFINED)
Today did a re-start. Could not get into Safe Mode. White apple logo screen ran for 3 minutes with progress indicator (circle of sticks) followed by blue screen with progress indicator for 7 minutes, followed by blank blue screen.
Started up in single user mode and ran fsck
Results were:
fsck -f
**/dev/rdisk0s2
** Checking HFS Plus Volume.
** Checking Extents Overflow file.
** Checking Catalog file.
disk0s2: 0xe0030005 (UNDEFINED)
Invalid node structure
(4, 34)
**Volume check failed.
localhost:/root#
This Macbook was purchase approximately 60 days ago. Is there a simple fix to this before going back to Apple?
Thanks,
Joe

Hello Joe.
Although similar to running fsck, boot from the Tiger install disc #1 that shipped with this MacBook and run Disk First Air repair on the hard drive.
If there is a hard drive directory problem that cannot be successfully repaired after running DFA repair several times, the directory problem is substantial and the options are using a more substantial disk repair utility such as Disk Warrior (not sure if DW has been updated for a Mac with an Intel processor or not) but if so, there is no guarantee but DW has been known to work miracles or reformat the hard drive HFS+ (or extended) with Journaling enabled and then reinstall OS X and all included software.
You can call AppleCare but they will have you or your friend run DFA repair and do the same. Unless there is hard drive damage that is covered under warranty, there isn't much else AppleCare can do and hopefully your friend has/maintains a backup since this is a good example for why maintaining a backup is so important.

Mid 2010 MacBook Pro: Will randomly blue-screen and Safari repeatedly crashes.

I bought my MacBook Pro in June/July of last year, and it has worked perfectly fine up to this point. However, for the past 2 months or so, my computer will randomly go to a blue screen and log me out. Also, Safari will crash several times (it had never crashed on me until the blue-screen problem started. Both of these issues surfaced at the same time). For the most part, the blue-screening problem only happens when I'm using the internet, but sometimes it will happen when I am offline as well. This is an infrequent/inconsistent problem, though. It will blue-screen and Safari will crash one week, but then it will be perfectly fine for the next three or four weeks. What's wrong/how do I fix it?

Hi JRC8.8,
It sounds like you have been on the right track in trying to troubleshoot this issue. You may want to see if your MacBook Pro will boot directly to the Apple Hardware Test, as outlined in the following article:
Apple Support: Using Apple Hardware Test
http://support.apple.com/kb/ht1509
Regards,
- Brenden

Help! Random blue screen appears and won't go away also getting glitches.

Hello,
So recently a blue screen has been randomly appearing taking up the whole screen, it won't go away until I hold down the button that turns laptop off. My screen has also been glitching and just now a glitch took up the whole screen then my background dissappeared to be left with this blue screen. Please help, I can't afford a new laptop!

That is odd and I'm not savvy enough to tell you what it means. But I'd venture a guess that you're in some kind of a debug mode. Again, a wild guess, but perhaps if you created a new admin account and log in with that, maybe the more (if that's the issue) will go away?
I'd start up in safe boot mode first and see if that helps. Maybe it's something running in your startup items?
Have you Googled the phrase? You might find something on a more technical Mac site that way? I just Googled <<event sysontoc>> and came up with a few leads you might want to check out.

Random Blue Screen Crash with 5S and iOS 8.1

Since upgrading to iOS 8.0 my iPhone 5S randomly gets blue screens and then crashes and goes into a loop of boot up, blue screen, reboot, blue screen, reboot...etc. My 5S did this again today when during my upgrade to iOS 8.1 via USB and I was forced to do a factory restore on it. The blue screen is still occurring after the restore and 8.1 upgrade. Is this a known issue? I was hoping this was going to get fixed with 8.1 but unfortunately, it doesn't look like it has.

Same here,
yesterday i updated my 6 plus 64gb with iTunes.
After the update, my phone crashes (blue screen) in games (Maze Runner) and Safari.
I tried to downgrade to ios 8.0 because i didn't had any problem with 8.0 but iTunes says that the file is not valid "iPhone7,2_8.0_12A365_Restore"
HELP Apple,
iPhone 6 Plus, iOS 8.1, MGAH2ZD/A model

Getting blue screen all of a sudden

Any idea why I would be getting a blue screen when using my MBP? I normally don't wait to see if it will clear itself, i will usually just restart my laptop. It happens once every other day.

Is there a box on the screen that says your system need to restart because of a problem?
Have you looked at the console to see what error is showing up at the time of these blue screens?

Random Blue Screens

At random times the blue screen you see at startup before the purple universe picture loads up in the background covers the entire screen, with nothing else on, and then fades out to reveal where I left off. I'm wondering if this is a security breach or a bug.

I am having the same exact problem. I am continuing to search for other matching threads.

Random Blue Screen Help

My laptop Blue screened. It also gave me details when it rebooted and I'd like to know what it means? My laptop is a Toshiba Satellite C675D-S7101. It is almost 3 years old and has done random unexplained BSOD's since it was 8 months old. Details of my BSOD are below. Can anyone help me figure out what's wrong?
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
Additional information about the problem:
BCCode: 7f
BCP1: 0000000000000008
BCP2: 0000000080050031
BCP3: 00000000000006F8
BCP4: FFFFF880050A5339
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1
Files that help describe the problem:
C:\Windows\Minidump\011315-93132-01.dmp
C:\Users\Kerri\AppData\Local\Temp\WER-151554-0.sysdata.xml
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\windows\system32\en-US\erofflps.txt

Satellite C675D-S7101
Downloads here.
Bug Check 0x7F: UNEXPECTED_KERNEL_MODE_TRAP
Please attach the following file..
C:\Windows\Minidump\011315-93132-01.dmp
Wouldn't hurt to attach several dmp files from that folder.
-Jerry

Blue screen: my G5 fails to boot normally, only in safe mode

Greetings,
After a power failure my iMac G5 started to behave quite odd.
That is, when I saw the computer was off, I pressed the power button, and it turned the coolers on and showed a screen filled with colored "snowflakes" (like one an untuned TV set shows, but static).
Curious, I forced it to restart, which ended in my current problem: +it boots, shows me a blue screen with mouse arrow in topleft corner, and this is it.+
Interesting is that when I move the mouse the cursor doubles: one arrow stays in its original place, and another one moves around the screen. Five minutes (or so) later the second arrow turns into a spinning beachball. After the blue screen appears there is almost no disk activity to be heard.
My next move was to try and boot from the Leopard DVD, which took much longer as it should, but ended in exactly the same way.
After that I tried safe mode, and here at last it worked. TechTool Pro's full disk check (including surface test) did not show any problems.
Reading the logs does not provide any clues to the problem. Everything is pretty much the same; I suppose it's just I don't know which log and where to read.
(By the way, I don't have the Application Enhancer which can cause a similar problem)
Any ideas on what's going on and how to deal with it will be very appreciated.
Thanks in advance!

There may not be a problem with your disk, but there certainly could be some problems with your file system. If you have or can borrow a copy of Disk Warrior, I'd use that to rebuild your directory with a new one; it will probably show a lot of problems in the report.
If you can't do that, then at least if you're in Safe Boot mode, the first thing I'd do is Repair Permissions, and then Verify Disk. If the Verify Disk report shows serious problems, you'll need to repair those before you can get a normal working system again. You should also try rebooting with the 10.5 Installer DVD again to see if it will let you boot, after you Repair Permissions and Verify Disk; if so, you can use Disk Utility from the DVD to repair your disk.

Windows 2008 Enterprise 32-bit Random Blue Screen 0x000000C4

Hello,
We have a customer with IBM x3500 M3 server, Windows 2008 Enterprise SP2 32-bit, 24GB RAM (Domain, file and print server, rdp server roles installed).
Since December 2013, they have been experiencing random reboots (once or twice a month), so I ran debug on the memory.dmp and found that ntkrpamp.exe wa scausing this issue:
Debug on memory.dmp file for January, 2014:
Microsoft (R) Windows Debugger Version 6.12.0002.633 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Debug\MEMORY.DMP]
Kernel Summary Dump File: Only kernel address space is available
Symbol search path is: srv*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is: C:\Win2008E.DVD
Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack 2) MP (12 procs) Free x86 compatible
Product: LanManNt, suite: Enterprise TerminalServer
Built by: 6002.18881.x86fre.vistasp2_gdr.130707-1535
Machine Name:
Kernel base = 0x82233000 PsLoadedModuleList = 0x8234ac70
Debug session time: Wed Jan 8 08:24:19.852 2014 (UTC - 5:00)
System Uptime: 4 days 0:37:56.528
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
*                        Bugcheck Analysis
Use !analyze -v to get detailed debugging information.
BugCheck 50, {f85c5048, 0, 823af2bf, 0}
Probably caused by : ntkrpamp.exe ( nt!CmpCheckKey+61b )
Followup: MachineOwner
9: kd> !analyze -v
*                        Bugcheck Analysis
PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced. This cannot be protected by try-except,
it must be protected by a Probe. Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: f85c5048, memory referenced.
Arg2: 00000000, value 0 = read operation, 1 = write operation.
Arg3: 823af2bf, If non-zero, the instruction address which referenced the bad memory
   address.
Arg4: 00000000, (reserved)
Debugging Details:
READ_ADDRESS: f85c5048
FAULTING_IP:
nt!CmpCheckKey+61b
823af2bf 394724          cmp     dword ptr [edi+24h],eax
MM_INTERNAL_CODE: 0
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x50
PROCESS_NAME: System
CURRENT_IRQL: 0
TRAP_FRAME: 97b7d9ec -- (.trap 0xffffffff97b7d9ec)
ErrCode = 00000000
eax=00000000 ebx=e6b30024 ecx=19ef8172 edx=00000035 esi=a559e6a8 edi=f85c5024
eip=823af2bf esp=97b7da60 ebp=97b7da8c iopl=0         nv up ei pl zr na pe nc
cs=0008 ss=0010 ds=0023 es=0023 fs=0030 gs=0000             efl=00010246
nt!CmpCheckKey+0x61b:
823af2bf 394724          cmp     dword ptr [edi+24h],eax ds:0023:f85c5048=????????
Resetting default scope
LAST_CONTROL_TRANSFER: from 82280de4 to 822cb292
STACK_TEXT:
97b7d9d4 82280de4 00000000 f85c5048 00000000 nt!MmAccessFault+0x10b
97b7d9d4 823af2bf 00000000 f85c5048 00000000 nt!KiTrap0E+0xdc
97b7da8c 823b581a 01000001 009c4020 009c3f70 nt!CmpCheckKey+0x61b
97b7dabc 823b5e48 a559e6a8 01000001 00000006 nt!CmpCheckRegistry2+0x8c
97b7db04 823b086e 01000001 97b7dc60 8000a05c nt!CmCheckRegistry+0xf5
97b7db60 823b2fdd 97b7dbb4 00000005 00000000 nt!CmpInitializeHive+0x4c1
97b7dbd8 823b527d 97b7dc60 00000000 97b7dc4c nt!CmpInitHiveFromFile+0x19e
97b7dc18 823ab4c5 97b7dc60 00000000 97b7dc7b nt!CmpCmdHiveOpen+0x36
97b7dd14 823ab6fa 00000002 8232b5a0 00000002 nt!CmpFlushBackupHive+0x2fd
97b7dd38 8248acbd 8233513c 8e9462d8 822d8d4a nt!CmpSyncBackupHives+0x90
97b7dd44 822d8d4a 00000000 00000000 8e9462d8 nt!CmpPeriodicBackupFlushWorker+0x32
97b7dd7c 8240901c 00000000 8e585cb2 00000000 nt!ExpWorkerThread+0xfd
97b7ddc0 82271eee 822d8c4d 00000001 00000000 nt!PspSystemThreadStartup+0x9d
00000000 00000000 00000000 00000000 00000000 nt!KiThreadStartup+0x16
STACK_COMMAND: kb
FOLLOWUP_IP:
nt!CmpCheckKey+61b
823af2bf 394724          cmp     dword ptr [edi+24h],eax
SYMBOL_STACK_INDEX: 2
SYMBOL_NAME: nt!CmpCheckKey+61b
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nt
IMAGE_NAME: ntkrpamp.exe
DEBUG_FLR_IMAGE_TIMESTAMP: 51da1840
FAILURE_BUCKET_ID: 0x50_nt!CmpCheckKey+61b
BUCKET_ID: 0x50_nt!CmpCheckKey+61b
Followup: MachineOwner
Based on google searches, driver verifier was recommended to be turned on to track driver with fault. I enabled verifier on all drivers, disabled automatic server reboot and today server crashed again.
here's the debug output of full memory.dmp file:
Microsoft (R) Windows Debugger Version 6.12.0002.633 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\windows\memory.dmp]
Kernel Summary Dump File: Only kernel address space is available
Symbol search path is: srv*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is: C:\Win2008E.DVD
Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack 2) MP (12 procs) Free x86 compatible
Product: LanManNt, suite: Enterprise TerminalServer
Built by: 6002.18881.x86fre.vistasp2_gdr.130707-1535
Machine Name:
Kernel base = 0x82214000 PsLoadedModuleList = 0x8232bc70
Debug session time: Thu Feb 13 08:29:07.272 2014 (UTC - 5:00)
System Uptime: 3 days 23:15:45.259
Loading Kernel Symbols
Loading User Symbols
PEB is paged out (Peb.Ldr = 7ffdd00c). Type ".hh dbgerr001" for details
Loading unloaded module list
*                        Bugcheck Analysis
Use !analyze -v to get detailed debugging information.
BugCheck C4, {e2, af033d18, 2d0000, 0}
Page 6684ef not present in the dump file. Type ".hh dbgerr004" for details
Page 66a0f9 not present in the dump file. Type ".hh dbgerr004" for details
Probably caused by : srvnet.sys ( srvnet!SrvNetWskSendData+c9 )
Followup: MachineOwner
9: kd> !analyze -v
*                        Bugcheck Analysis
DRIVER_VERIFIER_DETECTED_VIOLATION (c4)
A device driver attempting to corrupt the system has been caught. This is
because the driver was specified in the registry as being suspect (by the
administrator) and the kernel has enabled substantial checking of this driver.
If the driver attempts to corrupt the system, bugchecks 0xC4, 0xC1 and 0xA will
be among the most commonly seen crashes.
Arguments:
Arg1: 000000e2, IRP field is a user-mode address but Irp->RequestorMode is KernelMode.
Arg2: af033d18, IRP address.
Arg3: 002d0000, User-mode address present as the value of an IRP field.
Arg4: 00000000
Debugging Details:
Page 6684ef not present in the dump file. Type ".hh dbgerr004" for details
Page 66a0f9 not present in the dump file. Type ".hh dbgerr004" for details
BUGCHECK_STR: 0xc4_e2
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: spoolsv.exe
CURRENT_IRQL: 2
LAST_CONTROL_TRANSFER: from 824ff5a7 to 822e19bd
STACK_TEXT:
eff67a20 824ff5a7 000000c4 000000e2 af033d18 nt!KeBugCheckEx+0x1e
eff67a40 824fea32 af033d18 002d0000 9930e2e0 nt!VerifierBugCheckIfAppropriate+0x32
eff67a58 824fe7e0 af033d18 9930e2e0 99269b80 nt!ViIrpCheckKernelAddressForIrp+0x51
eff67a70 824f766d 99269b80 af033458 99269b80 nt!VfBeforeCallDriver+0x3d
eff67a90 82258931 af033fa4 af033fe0 99269b80 nt!IovCallDriver+0x1ef
eff67aa4 9b01271a eff67adc aad3183f bd99d34c nt!IofCallDriver+0x1b
eff67aac aad3183f bd99d34c eff67ad0 00000002 afd!WskProAPISend+0x67
eff67adc aad31490 9b01d9d0 af033d18 af033458 srvnet!SrvNetWskSendData+0xc9
eff67afc aad779d2 d5b93018 af033458 00000030 srvnet!SrvNetSendData+0x4d
eff67b14 aadb45bd af033368 aad75459 af033d18 srv!SrvStartSend2+0xa3
eff67b40 aad7522d af033fa4 eff67b84 824f7d4d srv!SrvFsdRestartReadAndX+0x127
eff67b4c 824f7d4d 00000000 af033d18 af033368 srv!SrvFsdIoCompletionRoutine+0x1d
eff67b84 822bb0fb 00000000 af033d18 eff67bf0 nt!IovpLocalCompletionRoutine+0x16e
eff67bb8 824f7b95 824f7a77 ccb4e7c8 eff67c44 nt!IopfCompleteRequest+0x11d
eff67c28 981a30d9 c3fbc2d8 ccb4e7c8 909c9dd0 nt!IovCompleteRequest+0x11c
eff67c4c 824f76be 909c9dd0 ccb4e7c8 9efe80e8 Npfs!NpFsdWrite+0x53
eff67c70 82258931 ccb4e838 ccb4e7c8 909c9dd0 nt!IovCallDriver+0x23f
eff67c84 8245ae25 9efe8114 ccb4e7c8 ccb4e838 nt!IofCallDriver+0x1b
eff67ca4 82427b13 909c9dd0 9efe80e8 00000001 nt!IopSynchronousServiceTail+0x1d9
eff67d38 8225ec96 909c9dd0 00000a39 00000000 nt!NtWriteFile+0x6fc
eff67d38 77755d14 909c9dd0 00000a39 00000000 nt!KiSystemServicePostCall
WARNING: Frame IP not in any known module. Following frames may be wrong.
0549f880 00000000 00000000 00000000 00000000 0x77755d14
STACK_COMMAND: kb
FOLLOWUP_IP:
srvnet!SrvNetWskSendData+c9
aad3183f 53              push    ebx
SYMBOL_STACK_INDEX: 7
SYMBOL_NAME: srvnet!SrvNetWskSendData+c9
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: srvnet
IMAGE_NAME: srvnet.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 4dbabc34
FAILURE_BUCKET_ID: 0xc4_e2_VRF_srvnet!SrvNetWskSendData+c9
BUCKET_ID: 0xc4_e2_VRF_srvnet!SrvNetWskSendData+c9
Followup: MachineOwner
Here's the output of mini dump file as well:
Microsoft (R) Windows Debugger Version 6.12.0002.633 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\windows\minidump\Mini021314-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: srv*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is: C:\Win2008E.DVD
Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack 2) MP (12 procs) Free x86 compatible
Product: LanManNt, suite: Enterprise TerminalServer
Built by: 6002.18881.x86fre.vistasp2_gdr.130707-1535
Machine Name:
Kernel base = 0x82214000 PsLoadedModuleList = 0x8232bc70
Debug session time: Thu Feb 13 08:29:07.272 2014 (UTC - 5:00)
System Uptime: 3 days 23:15:45.259
Loading Kernel Symbols
Press ctrl-c (cdb, kd, ntsd) or ctrl-break (windbg) to abort symbol loads that take too long.
Run !sym noisy before .reload to track down problems loading symbols.
Loading User Symbols
Loading unloaded module list
*                        Bugcheck Analysis
Use !analyze -v to get detailed debugging information.
BugCheck C4, {e2, af033d18, 2d0000, 0}
Probably caused by : srvnet.sys ( srvnet!SrvNetWskSendData+c9 )
Followup: MachineOwner
9: kd> !analyze -v
*                        Bugcheck Analysis
DRIVER_VERIFIER_DETECTED_VIOLATION (c4)
A device driver attempting to corrupt the system has been caught. This is
because the driver was specified in the registry as being suspect (by the
administrator) and the kernel has enabled substantial checking of this driver.
If the driver attempts to corrupt the system, bugchecks 0xC4, 0xC1 and 0xA will
be among the most commonly seen crashes.
Arguments:
Arg1: 000000e2, IRP field is a user-mode address but Irp->RequestorMode is KernelMode.
Arg2: af033d18, IRP address.
Arg3: 002d0000, User-mode address present as the value of an IRP field.
Arg4: 00000000
Debugging Details:
BUGCHECK_STR: 0xc4_e2
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VERIFIER_ENABLED_VISTA_MINIDUMP
PROCESS_NAME: spoolsv.exe
CURRENT_IRQL: 2
LAST_CONTROL_TRANSFER: from 824ff5a7 to 822e19bd
STACK_TEXT:
eff67a20 824ff5a7 000000c4 000000e2 af033d18 nt!KeBugCheckEx+0x1e
eff67a40 824fea32 af033d18 002d0000 9930e2e0 nt!VerifierBugCheckIfAppropriate+0x32
eff67a58 824fe7e0 af033d18 9930e2e0 99269b80 nt!ViIrpCheckKernelAddressForIrp+0x51
eff67a70 824f766d 99269b80 af033458 99269b80 nt!VfBeforeCallDriver+0x3d
eff67a90 82258931 af033fa4 af033fe0 99269b80 nt!IovCallDriver+0x1ef
eff67aa4 9b01271a eff67adc aad3183f bd99d34c nt!IofCallDriver+0x1b
eff67aac aad3183f bd99d34c eff67ad0 00000002 afd!WskProAPISend+0x67
eff67adc aad31490 9b01d9d0 af033d18 af033458 srvnet!SrvNetWskSendData+0xc9
eff67afc aad779d2 d5b93018 af033458 00000030 srvnet!SrvNetSendData+0x4d
eff67b14 aadb45bd af033368 aad75459 af033d18 srv!SrvStartSend2+0xa3
eff67b40 aad7522d af033fa4 eff67b84 824f7d4d srv!SrvFsdRestartReadAndX+0x127
eff67b4c 824f7d4d 00000000 af033d18 af033368 srv!SrvFsdIoCompletionRoutine+0x1d
eff67b84 822bb0fb 00000000 af033d18 eff67bf0 nt!IovpLocalCompletionRoutine+0x16e
eff67bb8 824f7b95 824f7a77 ccb4e7c8 eff67c44 nt!IopfCompleteRequest+0x11d
eff67c28 981a30d9 c3fbc2d8 ccb4e7c8 909c9dd0 nt!IovCompleteRequest+0x11c
eff67c4c 824f76be 909c9dd0 ccb4e7c8 9efe80e8 Npfs!NpFsdWrite+0x53
eff67c70 82258931 ccb4e838 ccb4e7c8 909c9dd0 nt!IovCallDriver+0x23f
eff67c84 8245ae25 9efe8114 ccb4e7c8 ccb4e838 nt!IofCallDriver+0x1b
eff67ca4 82427b13 909c9dd0 9efe80e8 00000001 nt!IopSynchronousServiceTail+0x1d9
eff67d38 8225ec96 909c9dd0 00000a39 00000000 nt!NtWriteFile+0x6fc
eff67d38 77755d14 909c9dd0 00000a39 00000000 nt!KiSystemServicePostCall
WARNING: Frame IP not in any known module. Following frames may be wrong.
0549f880 00000000 00000000 00000000 00000000 0x77755d14
STACK_COMMAND: kb
FOLLOWUP_IP:
srvnet!SrvNetWskSendData+c9
aad3183f 53              push    ebx
SYMBOL_STACK_INDEX: 7
SYMBOL_NAME: srvnet!SrvNetWskSendData+c9
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: srvnet
IMAGE_NAME: srvnet.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 4dbabc34
FAILURE_BUCKET_ID: 0xc4_e2_VRF_srvnet!SrvNetWskSendData+c9
BUCKET_ID: 0xc4_e2_VRF_srvnet!SrvNetWskSendData+c9
Followup: MachineOwner
I'd like to know how to fix this. Server has up-to-date firmware and drivers from IBM. It's also up-to-date on all windows updates.
Any help is greatly appreciated.
Will

This one may help.
http://msdn.microsoft.com/en-us/library/windows/hardware/ff559023(v=vs.85).aspx
I'd test the RAM and or get with IBM on best method to verify the hardware and drivers.
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Random blue screen - all programs fail at once

Similar Messages

Maybe you are looking for