Raw material shortage

Hi
Experts
I am having problem in Production order. Raw material shortage
We create Production order manually no MRP.
Process is
(Raw material in KG converted to EA)
Cutting Order(EA), Forging Order(EA), Heat treatment order(EA), Machining order (Finish) (EA)all codes are different.
We have one raw material which is used in 5 different Products
Is there any code to find where it is used
Thanks & Regards
Pert

Dear Mr Kumar
Both the Orders are diff
1) Cutting order material is in Kg cut in to pieces say 100 kg rod conveted to 500 pieces
then we create Production order for Forging this 500 pieces
2) but our sap MMBE system shows Forging semifinish stock is of 900 pieces (physsically not present)
3) Our store people say they issued material for the new order ie current which we have shortage of raw material.
4) My issue is solved when i get back this Forging semifinish stock of 900 pieces revert to store
but my problem is i am not able to trace out the production order of which this 900 pieces are?
if i revert both forging and cutting order then automatically sap system shows the raw material
So how to do it?
Thanks & Regards
Pert

Similar Messages

MRP for FG not looking at Raw Material

HI all,
I'm running MRP for finished goods material against my production plan (created in MD61).   The material has a BOM component but when I run MRP for the FG its not looking at BOM component to consider raw material) availability and thus proposing dates solely based on the Production Plan and not any other requirements.
It simple creates the planned orders based on the production plan entered into MD61. The dates for the planned orders don't take into consideration that on the suggested Production date there is not enough raw material to actual produce the product.
The Production plan does drive requirements to purchase the raw material but the dates are not neccessarily correct to get product to the warehouse on time for production run.
FG set up:
RP Type:                                PD - MRP
Lot Size:                                 EX u2013 Lot-for-lot Order Quantity
Safety Stock:                         125 - EA
Availability Check:                   02 u2013 Individual Requirements
Procurement Type:                   E - In-House Production
In-house Production:                 1 - days
Planning Strategy:                   10 u2013 Make-to-stock production
BOM / Raw Material set up:
RP Type:                                PD - MRP
Lot Size:                                 EX u2013 Lot-for-lot Order Quantity
Availability Check:                   02 u2013 Individual Requirements
Procurement Type:                    F - External Purchased
Pland Del Time:                         3 - days
GR Process time                       1 - days
Planning Strategy:                   40 u2013 Planning with Final Assembly
How do I get the MRP for the FG to not only create the planned orders from the production plan but also take into consideration raw material availability?   Thanks for your help!!

VC,
I need to the PlndOrd date for FG to take into consideration raw material availability...otherwise it's pretty useless to the site.
I guess you are unfamiliar with the workings of standard MRP. MRP in ECC as delivered by SAP will not support this requirement.
There are a couple of assemble to order strategies that may be suitable for you, if all of your RM materials exist in the FGs BOM. Strat 81 and 82, which are intimately linked to the Sales order ATP check. These strategies are not compatible with FGs forecasts.
http://help.sap.com/erp2005_ehp_06/helpdata/EN/41/19206a45fd11d188ff0000e8322f96/frameset.htm
In SAP ERP, MRP just does not check the availability of components during the MRP run. The Net Requirements calculation of a component part (which is the closest concept within MRP to an Availability check) takes place ONLY after all parent parts are completely planned, and all parent part planned orders have been already been generated and saved. In effect, when MRP is running, information is neither gathered nor considered as to what the planning situation will be for the components.
APO has several solutions that, depending upon the detailed requirements, might provide a solution. A common one is to first run an MRP type heuristic, to create planned orders for all the shortages, and subsequently run a 'Bottom-up' scheduling heuristic to bring supply and demand dates into alignment, based upon pegging information. ERP does not have this functionality.
Of course, SAP ERP is infinitely modifiable. If you have enough time and money, you can write custom code that will torture ERP into filling any Business Requirement.
Best Regards & Good Luck,
DB49

Minimum stock of raw material

Hai gurus,
My requirement is as follows:
1) My fert material consist of 5 ROH
2) The stock of all the ROH is to be maintained for minimum two days production qty.( 2 days inventory stock)
How to maintain this minimum stock of ROH and control under SAP
waiting for the positive reply.
Regards
sekar chand

Hai Bhramankar,
Thanks for your rpely.
In my case the material required for next three months is planned and procured by MM guys
after MRP run .
So the procurement is done and material is stored in central warehouse, and raw material required
for the next two days production is issued to production ROH stores and maintained as stock to avoid
any shortage for final production.
If it so how can we bring this scenario into SAP and keep track of total stock at central warehouse and two
days dynamic stock by the shop floor people
waiting for your detail reply.
Regards,
sekar chand

Report on raw material to wip for a production order

Hi,
Is there a report which has a list of " issue of raw materials to a production order"?
Or how to know how much raw material is issued to WIP on a production order.
i nee dto have a report which has material cost and material overhead an dtotal.
how to build this report ?
Thanks,
Sai.

Hi Sai,
You can try using MB51, use filter movement type 261. Add a filter for the posting date coverage.
Then proceed. Click on the icon DETAIL LIST.
Then click on the SUBTOTAL, add MATERIAL as a Criteria. The click the column AMOUNT IN LC.
You should see the total issuances to per material.
I hope this helps.
Heinrick Palad

Raw material cost report for production of finished produt.?(urgent..REWARD

Hi,
any one can help in this issue.
i am not getting the raw materila cost & manfacture conversion cost for for the bom of FG - SFG - SFG - SFG- RAW
FG - finished goods,
SFG - semi finished goods
RAW - raw material.
plz provide the solution.
raw material and manfacture conversion cost is calculated in PERFORM z_process_data. subroutine.
REPORT z_co_production_cost_nsk.
TABLES: afko, bkpf, t001w , caufv.
TYPE-POOLS: kkblo,
            slis.
DATA: d_datefrom LIKE sy-datum,
      d_dateto LIKE sy-datum,
      d_repid LIKE sy-repid,
      d_uname LIKE sy-uname,
      d_returncode TYPE i,
      d_tabix TYPE i,
      d_kokrs LIKE tka01-kokrs,
      d_waers LIKE tka01-waers,
      wa_fieldcatalog TYPE slis_fieldcat_main,
      wa_listevents TYPE slis_alv_event,
      wa_listlayout TYPE slis_layout_alv,
      wa_print_info TYPE slis_print_alv,
      wa_listheader TYPE slis_listheader,
      d_headerlines TYPE i.
DATA: BEGIN OF t_caufv OCCURS 0,
        aufnr TYPE caufv-aufnr,
        werks TYPE caufv-werks,
        objnr TYPE covp-objnr,
        gamng TYPE caufv-gamng,
        plnbez TYPE caufv-plnbez,
        rsnum TYPE caufv-rsnum,
      END OF t_caufv.
*Added by Anand Bothra on 24/11/2003
DATA: t_ab_caufv LIKE t_caufv OCCURS 0 WITH HEADER LINE.
DATA: t_temp_caufv LIKE t_caufv OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF t_afpo OCCURS 0,
        aufnr TYPE afpo-aufnr,
        posnr TYPE afpo-posnr,
        wemng TYPE afpo-wemng,
        amein TYPE afpo-amein,
        charg TYPE afpo-charg,
      END OF t_afpo.
DATA: BEGIN OF t_afpo1 OCCURS 0,
        aufnr TYPE afpo-aufnr,
        refaufnr TYPE afpo-aufnr,
        objnr TYPE caufv-objnr,
        rsnum TYPE afko-rsnum,
        wemng TYPE afpo-wemng,
        werks TYPE afpo-dwerk,
        charg TYPE afpo-charg,
      END OF t_afpo1.
DATA: BEGIN OF t_makt OCCURS 0,
        matnr TYPE makt-matnr,
        maktx TYPE makt-maktx,
      END OF t_makt.
DATA: t_fieldcatalog TYPE slis_t_fieldcat_alv,
      t_listevents TYPE slis_t_event,
      t_sortsequence TYPE slis_t_sortinfo_alv,
      t_listheader TYPE slis_t_listheader.
DATA: BEGIN OF t_production_costs OCCURS 0,
        objnr TYPE covp-objnr,       " Object Number
        kstar TYPE covp-kstar,       " Cost Element
        wkgbtr TYPE covp-wkgbtr,     " Cost of Line Item in CO area curr
        mbgbtr TYPE covp-mbgbtr,     " Quantity of Line Item
        matnr TYPE covp-matnr,       " Material Number
        kokrs TYPE covp-kokrs,       " Controlling Area
        belnr TYPE covp-belnr,       " Cost Accounting Document
        buzei TYPE covp-buzei,       " Item Number in Document
      END OF t_production_costs.
DATA: BEGIN OF t_production_costs1 OCCURS 0,
        objnr TYPE covp-objnr,       " Object Number
        kstar TYPE covp-kstar,       " Cost Element
        wkgbtr TYPE covp-wkgbtr,     " Cost of Line Item in CO area curr
        mbgbtr TYPE covp-mbgbtr,     " Quantity of Line Item
        kokrs TYPE covp-kokrs,       " Controlling Area
        belnr TYPE covp-belnr,       " Cost Accounting Document
        buzei TYPE covp-buzei,       " Item Number in Document
      END OF t_production_costs1.
DATA t_production_costs2 LIKE t_production_costs1
     OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF t_suborders OCCURS 0,
        aufnr TYPE caufv-aufnr,
        prevaufnr TYPE caufv-aufnr,
        objnr TYPE covp-objnr,
        rsnum TYPE caufv-rsnum,
      END OF t_suborders.
DATA: BEGIN OF t_outputtab OCCURS 0,
        plnbez LIKE afko-plnbez,             " Material Number
        objnr LIKE caufv-objnr,              " Object Number
        maktx LIKE makt-maktx,               " Material Description
        charg LIKE afpo-charg,               " Batch Number
        aufnr LIKE afko-aufnr,               " Production Order Number
        gamng LIKE caufv-gamng,              " Total Order Quantity
        wemng LIKE afpo-wemng,               " Goods Receipt Quantity
        amein LIKE afpo-amein,               " Unit of Measure
        yield TYPE p DECIMALS 2,             " Percentage Yield
        totalrmcost TYPE p DECIMALS 2,       " Total Raw Material Cost
        totalpmcost TYPE p DECIMALS 2,       " Total Packing Mat. Cost
        mfgconvcost TYPE p DECIMALS 2,       " Manu. Conversion Cost
        pkgconvcost TYPE p DECIMALS 2,       " Packing Conv. Cost
        rmperunit TYPE p DECIMALS 2,         " Raw Cost per unit
        pmperunit TYPE p DECIMALS 2,         " Pack Mat cost per unit
        ccperunit TYPE p DECIMALS 2,         " Conv Cost per unit
        totperunit TYPE p DECIMALS 2,        " Total Cost per unit
        waers LIKE tka01-waers,              " Currency Key for CO Area
      END OF t_outputtab.
*Added by Anand Bothra on 24/11/2003.
DATA: t_ab_outputtab LIKE t_outputtab OCCURS 0 WITH HEADER LINE,
      t_temp_outputtab LIKE t_outputtab OCCURS 0 WITH HEADER LINE.
BEGIN OF INSERTION VIP110703
DATA:wa_prev_outputtab LIKE LINE OF t_outputtab,
     wa_production_costs LIKE LINE OF t_production_costs.
DATA:prev_totmatqty TYPE p DECIMALS 2,
     prev_tot_mfgconv_cst TYPE p DECIMALS 2,
     grand_mat_qty TYPE p DECIMALS 2 ,
     tmp_aufnr TYPE caufv-aufnr.
DATA: BEGIN OF t_suborders_propcost OCCURS 0,
        aufnr TYPE caufv-aufnr,
        prevaufnr TYPE caufv-aufnr,
        objnr TYPE covp-objnr,
        rsnum TYPE caufv-rsnum,
        proprmcost TYPE p DECIMALS 2,
        prop_mfg_convcost TYPE p DECIMALS 2,
      END OF t_suborders_propcost.
DATA: wa_suborders LIKE LINE OF t_suborders.
END   OF INSERTION VIP110703
BEGIN OF INSERTION VIP111003
DATA: prev_aufnr TYPE caufv-aufnr,
      prev_matnr TYPE mara-matnr,
      curr_matnr TYPE mara-matnr.
DATA: bln_suborder ,
      ratio TYPE p DECIMALS 5.
BEGIN OF INSERTION VIP111003
*Added by Anand Bothra on 28/11/2003
DATA: d_flag TYPE c.
SELECTION-SCREEN BEGIN OF BLOCK zblock1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_plnbez FOR afko-plnbez,
                s_aufnr FOR afko-aufnr,
"Added By Vivek on 29.11.2005
                s_auart FOR caufv-auart obligatory.
PARAMETERS p_werks LIKE t001w-werks OBLIGATORY.
SELECTION-SCREEN END OF BLOCK zblock1.
SELECTION-SCREEN BEGIN OF BLOCK zblock2 WITH FRAME TITLE text-002.
SELECT-OPTIONS: s_monat FOR bkpf-monat NO-EXTENSION OBLIGATORY.
PARAMETERS p_gjahr LIKE bkpf-gjahr OBLIGATORY.
SELECTION-SCREEN END OF BLOCK zblock2.
SELECTION-SCREEN BEGIN OF BLOCK zblock3 WITH FRAME TITLE text-022.
PARAMETERS: p_detsum RADIOBUTTON GROUP rad,
            p_sum RADIOBUTTON GROUP rad.
SELECTION-SCREEN END OF BLOCK zblock3.
INITIALIZATION.
d_repid = sy-repid.
d_uname = sy-uname.
p_werks = 'G001'.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
   IF screen-name EQ 'P_WERKS'.
     screen-input = 0.
     MODIFY SCREEN.
   ENDIF.
ENDLOOP.
AT SELECTION-SCREEN ON s_monat.
IF s_monat-high IS INITIAL.
    IF NOT ( s_monat-low BETWEEN 1 AND 12 ).
      MESSAGE e398(00) WITH text-023 text-024 space space.
    ENDIF.
ELSE.
    IF ( ( s_monat-low LT 1 ) OR ( s_monat-high GT 12 ) ).
      MESSAGE e398(00) WITH text-023 text-024 text-025 space.
    ENDIF.
ENDIF.
START-OF-SELECTION.
PERFORM z_get_period_dates.
PERFORM z_select_prod_orders.
PERFORM z_select_prod_costs.
PERFORM z_select_addl_prod_costs.
PERFORM z_select_mat_desc.
END-OF-SELECTION.
IF d_returncode EQ 0.
    PERFORM z_process_data.
*Added by Anand Bothra on 24/11/2004.
    PERFORM z_select_to_print.
    PERFORM z_prepare_fieldcat.
    PERFORM z_get_alv_events.
    PERFORM z_define_sortsequence.
    PERFORM z_define_layout.
    PERFORM z_display_list.
*Added by Anand Botra on 25/11/2003.
    PERFORM z_export_to_excel.
    PERFORM z_send_mail_and_download.
ELSE.
    MESSAGE i017(p5).
ENDIF.
*&      Form Z_GET_PERIOD_DATES
      text
--> p1        text
<-- p2        text
FORM z_get_period_dates.
Determine the date range from the fiscal period range and
fiscal year entered on the selection screen
DATA: d_firstdate LIKE sy-datum,
        d_lastdate LIKE sy-datum,
        t_dates LIKE scscp_period_str OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'FIRST_AND_LAST_DAY_IN_YEAR_GET'
    EXPORTING
      i_gjahr        = p_gjahr
      i_periv        = 'V3'
    IMPORTING
      e_first_day    = d_firstdate
      e_last_day     = d_lastdate
    EXCEPTIONS
      input_false    = 1
      t009_notfound = 2
      t009b_notfound = 3
      OTHERS         = 4.
CALL FUNCTION 'CSCP_PARA1_GET_PERIODS'
    EXPORTING
      i_datuv    = d_firstdate
      i_datub    = d_lastdate
      i_timeunit = 'M'
    TABLES
      et_dates   = t_dates.
SORT t_dates BY sindex.
DELETE t_dates INDEX 1.
LOOP AT t_dates.
    SUBTRACT: 1 FROM t_dates-sindex,
              1 FROM t_dates-datub.
    MODIFY t_dates TRANSPORTING sindex datub.
ENDLOOP.
CLEAR: d_datefrom,
         t_dates.
READ TABLE t_dates WITH KEY sindex = s_monat-low.
d_datefrom = t_dates-datuv.
CLEAR d_dateto.
IF s_monat-high IS INITIAL.
    d_dateto = t_dates-datub.
ELSE.
    CLEAR t_dates.
    READ TABLE t_dates WITH KEY sindex = s_monat-high.
    d_dateto = t_dates-datub.
ENDIF.
ENDFORM.                    " Z_GET_PERIOD_DATES
*&      Form Z_SELECT_PROD_ORDERS
      text
--> p1        text
<-- p2        text
FORM z_select_prod_orders.
Select all production orders as per the selection criteria provided
DATA: d_dlv_code LIKE jstat-stat,
        d_teco_code LIKE jstat-stat,
        t_status LIKE jstat OCCURS 0 WITH HEADER LINE.
SELECT SINGLE name1 INTO t001w-name1 FROM t001w WHERE werks = p_werks.
if s_plnbez-low eq space and s_plnbez-high eq space.
endif.
SELECT aufnr werks objnr gamng rsnum plnbez
INTO CORRESPONDING FIELDS OF
TABLE t_caufv FROM caufv
WHERE aufnr IN s_aufnr
AND   auart IN ('PP01', 'LL02') : BY VIVEK
AND   auart in s_auart " Added By Vivek on 29.11.2005
AND   werks = p_werks
AND   plnbez IN s_plnbez
AND   getri BETWEEN d_datefrom AND d_dateto
ORDER BY aufnr.
d_returncode = sy-subrc.
IF d_returncode NE 0.
    STOP.
ENDIF.
Filter out only those production orders that have a status
DLV (Delivered) or TECO (Technically Confirmed).
CLEAR: d_dlv_code,
         d_teco_code.
PERFORM z_get_status_code USING 'DLV' CHANGING d_dlv_code.
PERFORM z_get_status_code USING 'TECO' CHANGING d_teco_code.
LOOP AT t_caufv.
    REFRESH t_status.
    CALL FUNCTION 'STATUS_READ'
         EXPORTING
          CLIENT           = SY-MANDT
              objnr            = t_caufv-objnr
             only_active      = 'X'
     IMPORTING
          OBTYP            =
          STSMA            =
          STONR            =
        TABLES
             status           = t_status
        EXCEPTIONS
             object_not_found = 1
             OTHERS           = 2
    IF sy-subrc EQ 0.
      CLEAR t_status.
      READ TABLE t_status WITH KEY stat = d_dlv_code.
      IF sy-subrc NE 0.
        CLEAR t_status.
        READ TABLE t_status WITH KEY stat = d_teco_code.
        IF sy-subrc NE 0.
          DELETE t_caufv.
        ENDIF.
      ENDIF.
    ELSE.
      DELETE t_caufv.
    ENDIF.
ENDLOOP.
IF t_caufv[] IS INITIAL.
    d_returncode = 4.
    STOP.
ENDIF.
Added by Anand Bothra on 24/11/2003**********
t_ab_caufv[] = t_caufv[].
Added by Anand Bothra on 28/11/2003.
IF ( s_plnbez-low EQ space AND s_plnbez-high EQ space ).
    IF ( s_aufnr-low EQ space AND s_aufnr-high EQ space ).
      d_flag = 'N'.
    ELSE.
      d_flag = 'Y'.
    ENDIF.
ELSE.
    d_flag = 'Y'.
ENDIF.
IF d_flag = 'Y'.
Added by Anand Bothra on 21/11/2003.**********
*Get the batch number of the entered order
    DATA: itab_afpo LIKE afpo OCCURS 100 WITH HEADER LINE.
    DATA: BEGIN OF t_ab_charg OCCURS 0,
*Added by Anand on 27/11/2003
            aufnr LIKE afpo-aufnr,
            charg LIKE afpo-charg,
            END OF t_ab_charg.
    LOOP AT t_caufv.
      SELECT aufnr charg FROM afpo INTO t_ab_charg WHERE aufnr =
t_caufv-aufnr.
        APPEND t_ab_charg.
        CLEAR t_ab_charg.
      ENDSELECT.
    ENDLOOP.
IF sy-subrc = 0.
   SELECT * FROM afpo INTO TABLE itab_afpo WHERE charg = d_ab_charg.
ENDIF.
    LOOP AT t_ab_charg.
      SELECT * FROM afpo INTO itab_afpo WHERE charg = t_ab_charg-charg.
        APPEND itab_afpo.
        CLEAR itab_afpo.
      ENDSELECT.
    ENDLOOP.
    CLEAR t_caufv.
    REFRESH t_caufv.
*Get all the orders with the same batch number.
    LOOP AT itab_afpo.
      SELECT aufnr werks objnr gamng rsnum plnbez
      INTO CORRESPONDING FIELDS OF
      t_caufv FROM caufv WHERE aufnr = itab_afpo-aufnr.
        APPEND t_caufv.
      ENDSELECT.
    ENDLOOP.
    CLEAR t_caufv.
    SORT t_caufv BY aufnr.
delete adjacent duplicates from t_caufv comparing all fields.
ENDIF.
SELECT aufnr posnr wemng amein charg INTO TABLE t_afpo
FROM afpo FOR ALL ENTRIES IN t_caufv
WHERE aufnr = t_caufv-aufnr.
d_returncode = sy-subrc.
IF d_returncode NE 0.
    STOP.
ENDIF.
SORT t_afpo BY aufnr.
ENDFORM.                    " Z_SELECT_PROD_ORDERS
*&      Form Z_SELECT_MAT_DESC
      text
--> p1        text
<-- p2        text
FORM z_select_mat_desc.
Get the Description of all materials
SELECT matnr maktx INTO TABLE t_makt FROM makt
FOR ALL ENTRIES IN t_caufv
WHERE matnr = t_caufv-plnbez
AND   spras = sy-langu.
ENDFORM.                    " Z_SELECT_MAT_DESC
*&      Form Z_PROCESS_DATA
      text
--> p1        text
<-- p2        text
FORM z_process_data.
Process the data from all production orders and prepare the output
table for display appropriately
DATA: d_mbgbtr TYPE p DECIMALS 3,
        loop_cnt TYPE i.
REFRESH t_outputtab.
LOOP AT t_caufv.
    CLEAR t_outputtab.
    MOVE-CORRESPONDING t_caufv TO t_outputtab.
    CLEAR t_makt.
    READ TABLE t_makt WITH KEY matnr = t_caufv-plnbez.
    IF sy-subrc EQ 0.
      MOVE t_makt-maktx TO t_outputtab-maktx.
    ENDIF.
    CLEAR t_afpo.
    READ TABLE t_afpo WITH KEY aufnr = t_caufv-aufnr.
    IF sy-subrc EQ 0.
      MOVE: t_afpo-wemng TO t_outputtab-wemng,
            t_afpo-amein TO t_outputtab-amein,
            t_afpo-charg TO t_outputtab-charg.
    ENDIF.
    IF t_outputtab-gamng NE 0.
      COMPUTE t_outputtab-yield =
      ( t_outputtab-wemng / t_outputtab-gamng ) * 100.
    ENDIF.
    APPEND t_outputtab.
ENDLOOP.
SORT t_production_costs BY objnr kstar.
LOOP AT t_production_costs.
    AT NEW objnr.
      CLEAR: d_mbgbtr, d_tabix, t_outputtab.
      READ TABLE t_outputtab WITH KEY objnr = t_production_costs-objnr.
      MOVE sy-tabix TO d_tabix.
      " Add up the Raw Material and Manufacturing Conversion
      " Costs from the previous stage production order
      CLEAR loop_cnt .
      LOOP AT t_suborders WHERE aufnr = t_outputtab-aufnr.
     commented by anand bothra on 20/11/2003
        ADD 1 TO loop_cnt.
        IF loop_cnt > 1.
          EXIT.
        ENDIF.
        LOOP AT t_production_costs1 WHERE objnr = t_suborders-objnr.
          CASE t_production_costs1-kstar.
            WHEN '0005000000' OR '0005010000'.     " Raw Material Cost
BEGIN OF deletion VIP110703
          ADD t_production_costs1-wkgbtr TO t_outputtab-totalrmcost.
END   OF deletion VIP110703
              ADD t_production_costs1-wkgbtr TO prev_totmatqty.
            WHEN '0000500100'.      " Manufacturing Conversion Cost
              ADD t_production_costs1-wkgbtr TO prev_tot_mfgconv_cst.
BEGIN OF deletion VIP110703
            ADD t_production_costs1-wkgbtr TO t_outputtab-mfgconvcost.
END   OF deletion VIP110703
          ENDCASE.
        ENDLOOP.
BEGIN OF INSERTION VIP110703
       READ TABLE t_production_costs INTO wa_production_costs
       WITH KEY objnr = t_production_costs-objnr
                  matnr = wa_prev_outputtab-plnbez.
       IF sy-subrc = 0.
         IF ( wa_production_costs-mbgbtr NE
                               wa_prev_outputtab-wemng ) .
           prev_totmatqty = ( prev_totmatqty /
                              wa_prev_outputtab-wemng ) *
                             wa_production_costs-mbgbtr.
           prev_tot_mfgconv_cst = ( prev_tot_mfgconv_cst /
                              wa_prev_outputtab-wemng ) *
                              wa_production_costs-mbgbtr.
         ENDIF.
       ENDIF.
       LOOP AT t_suborders_propcost
               WHERE prevaufnr = wa_prev_outputtab-aufnr.
         t_suborders_propcost-proprmcost = prev_totmatqty.
         t_suborders_propcost-prop_mfg_convcost = prev_tot_mfgconv_cst
         MODIFY t_suborders_propcost.
       ENDLOOP.
       clear: prev_totmatqty,
               prev_tot_mfgconv_cst.
END   OF INSERTION VIP110703
BEGIN OF INSERTION VIP111003
        CLEAR: wa_prev_outputtab,
               wa_production_costs.
        READ TABLE t_outputtab INTO wa_prev_outputtab
        WITH KEY aufnr = t_suborders-prevaufnr.
        ratio = 1.
        IF sy-subrc = 0.
          READ TABLE t_production_costs INTO wa_production_costs
          WITH KEY objnr = t_outputtab-objnr
                     matnr = wa_prev_outputtab-plnbez.
          IF sy-subrc = 0.
            IF ( wa_production_costs-mbgbtr NE
                                  wa_prev_outputtab-wemng ) .
              ratio = wa_production_costs-mbgbtr /
                      wa_prev_outputtab-wemng.
              prev_totmatqty = ( prev_totmatqty /
                                 wa_prev_outputtab-wemng ) *
                                wa_production_costs-mbgbtr.
              prev_tot_mfgconv_cst = ( prev_tot_mfgconv_cst /
                                 wa_prev_outputtab-wemng ) *
                                 wa_production_costs-mbgbtr.
            ENDIF.
          ENDIF.
        ENDIF.
        LOOP AT t_suborders_propcost
                WHERE prevaufnr = wa_prev_outputtab-aufnr
                AND aufnr = t_outputtab-aufnr.
          t_suborders_propcost-proprmcost = prev_totmatqty.
          t_suborders_propcost-prop_mfg_convcost = prev_tot_mfgconv_cst.
          MODIFY t_suborders_propcost.
        ENDLOOP.
*Commented by Anand Bothra on 20/11/2003.
        CLEAR: prev_totmatqty,
                prev_tot_mfgconv_cst.
BEGIN OF INSERTION VIP111003
      ENDLOOP.
    ENDAT.
    AT END OF kstar.
      SUM.
      CASE t_production_costs-kstar.
        WHEN '0000500200'.    " Packing Conversion Costs
          t_outputtab-pkgconvcost = t_production_costs-wkgbtr.
        WHEN '0005000500'.   " Semi-Finished Cost/Quantity
          MOVE t_production_costs-mbgbtr TO d_mbgbtr.
        WHEN '0005050000' OR '0005050001' OR '0005050002'.
          " Packing Mat Costs
          ADD t_production_costs-wkgbtr TO t_outputtab-totalpmcost.
        WHEN '0005000000' OR '0005010000'.
          ADD t_production_costs-wkgbtr TO t_outputtab-totalrmcost.
        WHEN '0000500100'.      " Manufacturing Conversion Cost
          ADD t_production_costs-wkgbtr TO t_outputtab-mfgconvcost.
      ENDCASE.
    ENDAT.
    AT END OF objnr.
      MOVE d_waers TO t_outputtab-waers.
Calculations for the Production Order
      " Determine the RM Cost/Unit and Mfg Conv Cost/Unit
      CLEAR t_afpo1.
      READ TABLE t_afpo1 WITH KEY aufnr = t_outputtab-aufnr.
      IF ( ( sy-subrc EQ 0 ) AND ( t_afpo1-wemng NE 0 ) ).
BEGIN OF insertion VIP110703
       tmp_aufnr = t_production_costs-objnr+2(12).
       LOOP AT t_suborders_propcost
       WHERE aufnr = tmp_aufnr .
        ADD t_suborders_propcost-proprmcost TO t_outputtab-totalrmcost
         ADD t_suborders_propcost-prop_mfg_convcost TO
              t_outputtab-mfgconvcost.
       ENDLOOP.
END   OF insertion VIP110703
BEGIN OF insertion VIP111003
        CLEAR: t_suborders_propcost , tmp_aufnr.
        READ TABLE t_suborders_propcost
        WITH KEY aufnr = t_outputtab-aufnr.
        IF sy-subrc = 0.
         t_suborders_propcost-proprmcost =
             t_suborders_propcost-proprmcost * ratio.
          ADD t_suborders_propcost-proprmcost
                TO t_outputtab-totalrmcost.
         t_suborders_propcost-prop_mfg_convcost =
             t_suborders_propcost-prop_mfg_convcost * ratio.
          ADD t_suborders_propcost-prop_mfg_convcost
               TO t_outputtab-mfgconvcost.
          tmp_aufnr = t_suborders_propcost-prevaufnr.
          bln_suborder = 'T'.
          WHILE bln_suborder = 'T'.
            CLEAR: t_suborders_propcost .
            READ TABLE t_suborders_propcost
            WITH KEY aufnr = tmp_aufnr.
            IF sy-subrc = 0.
              t_suborders_propcost-proprmcost =
                t_suborders_propcost-proprmcost * ratio.
              ADD t_suborders_propcost-proprmcost
                    TO t_outputtab-totalrmcost.
              t_suborders_propcost-prop_mfg_convcost =
                  t_suborders_propcost-prop_mfg_convcost * ratio.
              ADD t_suborders_propcost-prop_mfg_convcost
                   TO t_outputtab-mfgconvcost.
              tmp_aufnr = t_suborders_propcost-prevaufnr.
            ELSE.
              bln_suborder = 'F'.
              CLEAR tmp_aufnr.
            ENDIF.
          ENDWHILE.
        ENDIF.
END   OF insertion VIP111003
END   OF deletion VIP110703
       t_outputtab-mfgconvcost = ( t_outputtab-mfgconvcost /
                                   t_afpo1-wemng ) * d_mbgbtr.
       t_outputtab-totalrmcost = ( t_outputtab-totalrmcost /
                                   t_afpo1-wemng ) * d_mbgbtr.
END   OF deletion VIP110703
      ENDIF.
      IF t_outputtab-wemng NE 0.
        t_outputtab-rmperunit = t_outputtab-totalrmcost /
                                t_outputtab-wemng.
        " PM Cost Per Unit = Total PM Cost / Quantity Delivered
        t_outputtab-pmperunit = t_outputtab-totalpmcost
                                / t_outputtab-wemng.
        " Conv Cost Cost Per Unit = (Manu Conv Cost + Pack Conv Cost)
        "                           / Qty Delv
        t_outputtab-ccperunit = ( t_outputtab-mfgconvcost
                                + t_outputtab-pkgconvcost )
                                / t_outputtab-wemng.
      ENDIF.
      " Total Cost Per Unit = (RM Cost per unit + PM Cost per Unit
      "                       + Conv Cost per unit)
      t_outputtab-totperunit = t_outputtab-rmperunit
                               + t_outputtab-pmperunit
                               + t_outputtab-ccperunit.
Update the calculated values in the internal table
      CHECK d_tabix GT 0.
      MODIFY t_outputtab INDEX d_tabix
                         TRANSPORTING totalrmcost totalpmcost
                                      mfgconvcost pkgconvcost
                                      rmperunit pmperunit
                                      ccperunit totperunit waers.
BEGIN OF DELETION VIP110703
     MOVE t_outputtab TO wa_prev_outputtab.
END   OF DELETION VIP110703
    ENDAT.
ENDLOOP.
ENDFORM.                    " Z_PROCESS_DATA
*&      Form Z_DISPLAY_LIST
      text
--> p1        text
<-- p2        text
FORM z_display_list.
Display the Report
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
      EXPORTING
        I_INTERFACE_CHECK        = ' '
         i_callback_program       = d_repid
        I_CALLBACK_PF_STATUS_SET = ' '
        I_CALLBACK_USER_COMMAND = ' '
        I_STRUCTURE_NAME         =
         is_layout                = wa_listlayout
           it_fieldcat              = t_fieldcatalog
        IT_EXCLUDING             =
        IT_SPECIAL_GROUPS        =
           it_sort                  = t_sortsequence
        IT_FILTER                =
        IS_SEL_HIDE              =
        I_DEFAULT                = 'X'
        I_SAVE                   = ' '
        IS_VARIANT               = ' '
         it_events                = t_listevents
        IT_EVENT_EXIT            =
         is_print                 = wa_print_info
        IS_REPREP_ID             =
        I_SCREEN_START_COLUMN    = 0
        I_SCREEN_START_LINE      = 0
        I_SCREEN_END_COLUMN      = 0
        I_SCREEN_END_LINE        = 0
        I_BYPASSING_BUFFER       =
        I_BUFFER_ACTIVE          =
   IMPORTING
        E_EXIT_CAUSED_BY_CALLER =
        ES_EXIT_CAUSED_BY_USER   =
       TABLES
            t_outtab                 = t_outputtab
      EXCEPTIONS
           program_error            = 1
           OTHERS                   = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
SET PF-STATUS 'Z_AB_STANDARD'.
ENDFORM.                    " Z_DISPLAY_LIST
*&      Form Z_FILL_FIELDCATALOG
      text
--> p1        text
<-- p2        text
FORM z_fill_fieldcatalog USING      p_rownum LIKE sy-curow
                                    p_colnum LIKE sy-cucol
                                    p_fieldname TYPE slis_fieldname
                                    p_tabname TYPE slis_tabname
                                    p_reffield TYPE dd03p-fieldname
                                    p_reftable TYPE dd03p-tabname
                                    p_qfield TYPE slis_fieldname
                                    p_qtab TYPE slis_tabname
                                    p_sum
                                    p_stext
                                    p_mtext
                                    p_ltext
                                    p_datatype
                                    p_outputlen.
Prepare the fields for ALV list output
CLEAR wa_fieldcatalog.
wa_fieldcatalog-row_pos = p_rownum.
wa_fieldcatalog-col_pos = p_colnum.
wa_fieldcatalog-fieldname = p_fieldname.
wa_fieldcatalog-tabname = p_tabname.
wa_fieldcatalog-ref_fieldname = p_reffield.
wa_fieldcatalog-ref_tabname = p_reftable.
wa_fieldcatalog-qfieldname = p_qfield.
wa_fieldcatalog-qtabname = p_qtab.
wa_fieldcatalog-do_sum = p_sum.
wa_fieldcatalog-seltext_s = p_stext.
wa_fieldcatalog-seltext_m = p_mtext.
wa_fieldcatalog-seltext_l = p_ltext.
wa_fieldcatalog-datatype = p_datatype.
wa_fieldcatalog-outputlen = p_outputlen.
APPEND wa_fieldcatalog TO t_fieldcatalog.
ENDFORM.                    " Z_FILL_FIELDCATALOG
*&      Form Z_PREPARE_FIELDCAT
      text
--> p1        text
<-- p2        text
FORM z_prepare_fieldcat.
Append all the display fields into the field catalog internal table
First Row
PERFORM z_fill_fieldcatalog USING 1 1 'PLNBEZ' 'T_OUTPUTTAB'
                                    space 'AFKO' space space
                                    space space space space space
                                    0.
PERFORM z_fill_fieldcatalog USING 1 2 'MAKTX' 'T_OUTPUTTAB'
                                    space 'MAKT' space space
                                    space space space space space
                                    0.
PERFORM z_fill_fieldcatalog USING 1 3 'CHARG' 'T_OUTPUTTAB'
                                    space 'AFPO' space space
                                    space space space space space
                                    0.
Second Row
PERFORM z_fill_fieldcatalog USING 2 1 'AUFNR' 'T_OUTPUTTAB'
                                    space 'AFKO' space space
                                    space space space space space
                                    0.
PERFORM z_fill_fieldcatalog USING 2 2 'GAMNG' 'T_OUTPUTTAB'
                                    space 'CAUFV' 'AMEIN' space
                                    'X' space space space space
                                    0.
PERFORM z_fill_fieldcatalog USING 2 3 'WEMNG' 'T_OUTPUTTAB'
                                    space 'AFPO' 'AMEIN' space
                                    'X' space space space space
                                    0.
PERFORM z_fill_fieldcatalog USING 2 4 'AMEIN' 'T_OUTPUTTAB'
                                    space 'AFPO' space space
                                    space space space space space
                                    0.
PERFORM z_fill_fieldcatalog USING 2 5 'YIELD' 'T_OUTPUTTAB'
                                    space space space space
                                    space text-010 text-010 text-010
                                    'QUAN' 17.
Third Row
PERFORM z_fill_fieldcatalog USING 3 1 'TOTALRMCOST' 'T_OUTPUTTAB'
                                    space space space space
                                    'X' text-011 text-011 text-011
                                    'CURR' 21.
PERFORM z_fill_fieldcatalog USING 3 2 'TOTALPMCOST' 'T_OUTPUTTAB'
                                    space space space space
                                    'X' text-012 text-012 text-012
                                    'CURR' 21.
PERFORM z_fill_fieldcatalog USING 3 3 'MFGCONVCOST' 'T_OUTPUTTAB'
                                    space space space space
                                    'X' text-013 text-013 text-013
                                    'CURR' 21.
PERFORM z_fill_fieldcatalog USING 3 4 'PKGCONVCOST' 'T_OUTPUTTAB'
                                    space space space space
                                    'X' text-014 text-014 text-014
                                    'CURR' 21.
Fourth Row
PERFORM z_fill_fieldcatalog USING 4 1 'RMPERUNIT' 'T_OUTPUTTAB'
                                    space space space space
                                    space text-015 text-015 text-015
                                    'CURR' 21.
PERFORM z_fill_fieldcatalog USING 4 2 'PMPERUNIT' 'T_OUTPUTTAB'
                                    space space space space
                                    space text-016 text-016 text-016
                                    'CURR' 21.
PERFORM z_fill_fieldcatalog USING 4 3 'CCPERUNIT' 'T_OUTPUTTAB'
                                    space space space space
                                    space text-017 text-017 text-017
                                    'CURR' 21.
PERFORM z_fill_fieldcatalog USING 4 4 'TOTPERUNIT' 'T_OUTPUTTAB'
                                    space space space space
                                    space text-018 text-018 text-018
                                   'CURR' 21.
ENDFORM.                    " Z_PREPARE_FIELDCAT
*&      Form Z_GET_ALV_EVENTS
      text
--> p1        text
<-- p2        text
FORM z_get_alv_events.
Returns table of possible events for a list type
REFRESH t_listevents.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
   EXPORTING
        I_LIST_TYPE     = 0
      IMPORTING
           et_events       = t_listevents
      EXCEPTIONS
           list_type_wrong = 1
           OTHERS          = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
    CLEAR: wa_listevents, d_tabix.
    READ TABLE t_listevents WITH KEY name = slis_ev_top_of_page
    INTO wa_listevents.
    d_tabix = sy-tabix.

Hi Sai,
      You can try using MB51, use filter movement type 261. Add a filter for the posting date coverage.
Then proceed. Click on the icon DETAIL LIST.
Then click on the SUBTOTAL, add MATERIAL as a Criteria. The click the column AMOUNT IN LC.
You should see the total issuances to per material.
I hope this helps.
Heinrick Palad

Report for issuance of raw material

Hi!!!!
Kindly suggest me the t-code where i can look for the issuance of raw material against production orders on a month basis or quarterly basis.
Thanks

Hi,
COOIS:
maybe you should apply the settings written by me in my previous message since you can see the consumption of components in this report. Paste the movement type field in the layout and you will see 261.
MB51
you can paste the field ('Order') in the layout that contains the PrdOrd no.
MB53
Run the report > pusch 'consumption' button. That's all.
You should examine these reports and try to use them. You can get the information from COOIS ( components and from MB51.
BR
Csaba
Edited by: Csaba Szommer on Jul 23, 2008 9:45 AM

Price Difference A/c is debiting instead of Raw Material A/c when MIGO

Hi Experts,
Please can any body help me regarding FI-MM integration.
When do the MIGO transaction as per standard - Debit is Raw Material A/c and Credit GR/IR Clearing A/c.
But in my System Debit is Price Difference A/c and Credit is GR/IR Clearing A/c is taking, because Price Difference A/c is coming from PRD transaction Key where I given Price Difference A/c. Why system is not taking Raw Material A/c from BSX transaction key.
Please help me as soon as possible.
Regards,
KBR.

Hi..
I want to add :
If you want to maintain Price Control as "S" then maintain standard price (MR21).
Then stand price will hit BSX nad diff between PO price and Stnd Price will go to PRD a/c.
kkumar

Raw Material Consumption to Process Orders

Hi Friends,
I need help with changing the way how we consume raw materials in our manufacturing organization.
Current Process:
A.     Receive product A in Warehouse, movement type 101. Debit Inventory Account, and Credit GR/IR.
B.     Move product A to a storage location (out of Warehouseu2019s custody). Movement type 311. No impact to P&L, as no accounting entries.
C.     Consume product A in a u2018Process Orderu2019 from that storage location 311. Debit Consumption Account, and Credit Inventory Account.
Product A is listed in Bill of Materials and has to be issued to process orders for final consumption u2013 to give production variance as we are on standard costing system.
Desired Process:
We want to have stronger controls in our organization. We want to hit P&L in step B, as soon as Warehouse issues items out. This can be done using movement type 201 GI for Cost Center.
But we also desire to see final consumption happening in process orders, as all our BOMs and standard costs account for the consumption of product A.
Please advice how do we issue items to a process order that have already been issued to a Cost Center. What is it that I am missing?
Thanks,
Meet A

I believe we will stick with our current process. See Ajay's reply on the link below:
Raw Material Consumption to Process Orders
Thanks and regards,
Meet A.

Raw material profit centre document is not generated

Hi All
When i maintain profit centre in raw material and do GR/IR, only accounting doc is generated. The profit centre mentioned in material is reflected against both accounts in the entry. (rm inventory a/c and GR/IR clearing a/c)
When I go and see report of that particular profit centre I dont see any posting. Why is it so?
Can u help me out?
Regards
Rakesh

I am certain that a profit center document gets created for materials that have moving average price.
If the profit center in the material master was entered after the goods receipt, then the amount is still posted to a default profit center, but not to the profit center you expect.
first find your movement in MB51 or in purchase order history tab of ME23N.
Beeing in the material document, click the finance documents button at header level in document info tab. A pop-up appears where you have to select to where to go, either to the accounting doc or to the profit center document.
If you see this profit center doc in this pop-up, then you can be sure that it is posted to a profit center. go into this document to see to which profit center the posting was made.

Report on Actual Price of Raw Material

Dear Experts,
There is any report on which I can see Actual Purchase Price of Raw material.
Thanks in Advance
regards...Kaushal

Dear Kaushal,
If so do you want the price that's maintained in the Purchase Info Record?
If required the price mentioned in PIR can be overwritten while purchase order is created.
If you want to take the values mentioned in Purchase Info record means,check these tables,
EINA                           Purchasing Info Record: General Data
EINE                           Purchasing Info Record: Purchasing Organization
EKKO                         Purchasing Document Header
EKPO                         Purchasing Document Item
Regards
Mangalraj.S

Excice invoice captured as capital goods, but material is raw material

All SAP Gurus,
We have wrongly captured (and posted) the excise invoice as Capital goods (RG 23C), but material is Raw material (RG 23A).
Material document can not be reversed as material is already issued and consumed for production activities.
To get the effect in Rg 23 A, we have passed the Excise JV (J1IH - Other Adj.).
Due to this Excise JV, we are getting entry in RG 23A, but the same entry is also displayed in RG 23C.
Is there a way to delete/remove/reverse this entry from RG 23C.
Please suggest,
Regards,

Hi,
Use following functions to adjust the duties in RG23A and RG23C;
Go to J1IH - Excise JV
Use following method to reduce duties from RG23C Accounts
Making Adjustment Postings for Other Transactions
Use: - You follow this procedure if you want to make an adjustment posting that does not fall into any of the other categories of adjustment offered by this function. You can only use an external document as your reference document.
Procedure: -
1. J1IH > Excise JV > Other adj.
2. Enter data as required, including:
u2022 Document number
Enter the number of the external document that you want to refer to.
u2022 CENVAT account selection group box
Specify which account is affected by the adjustment posting is for. Here in your case select RG23C.
3. Click on u201CEnteru201D button.
The system displays the information from the material document.
4. Adjust the posting date as necessary and enter Vendor code as per requirement.
5. Enter the amount of excise duty in either of the following ways:
u2022 To enter line items for different materials and the excise duty accordingly, choose u201CDetailsu201D button and enter the line items in the table.
Here fill details like Material Code, Quantity as per Excise Invoice, Batch No, Reference (i.e. GRN Document), BED and Ed Cess Amount manually.
If you want system to propose the BED and Ed Cess Amount, Click on u201CGet Excise Invoiceu201D button and select the proper Excise Invoice from which the proportionate amount is to be copied.
Select the u201CExcise Invoiceu201D and click on u201CContinueu201D button.
It will copy BED and Ed Cess and SECess amount as per the quantity mentioned here. It will be proposed in proportion of selected Excise Invoice quantity and value.
u2022 To enter the excise duty only, choose u201CHeaderu201D button and enter the excise duty in the totals fields at the foot of the screen.
6. Specify which G/L accounts are to be posted to.
7. Save the adjustment posting.
System will post Excise JV Document; Accounting Document with Part2 Serial No has been successfully created.
Use following method to take duty credit in RG23A Accounts
Making Adjustment Postings for Additional Excise Paid by Vendors
Use: - You follow this procedure if a vendor has increased the amount of excise duty that it originally charged you and you want to debit the difference to your CENVAT account.
Procedure: -
1. J1IH > Excise JV > Additional excise.
2. Enter data as required.
In the Document number field, enter then number of the document sent to you by the vendor.
u2022 CENVAT account selection group box
Specify which account is affected by the adjustment posting is for. Here in your case select RG23A.
3. Click on u201CEnteru201D button.
4. Adjust the posting date as necessary and Enter Vendor Name.
5. Enter the amount of excise duty in either of the following ways:
u2022 To enter line items for different materials and the excise duty accordingly, choose u201CDetailsu201D button and enter the line items in the table.
Here Enter Material code, quantity as per excise invoice, reference document (i.e. GRN Document), batch no., BED and Ed Cess Amount to be posted.
u2022 To enter the excise duty only, choose u201CHeaderu201D button and enter the excise duty in the totals fields at the foot of the screen.
6. If the duty qualifies as countervailing duty (CVD):
a. Select CVD applicable.
b. Enter the CVD amount in the BED amount field.
7. Specify which G/L accounts are to be posted to.
8. Save the adjustment posting.
System will post Excise JV Document; Accounting Document with Part2 Serial No has been successfully created.
Then do J2I5 - Extract and J2I6 - Print Excise Registers

Excise Invoice posted as Capital goods, but material is a raw material

All SAP Gurus,
J1ID data wrongly uploaded as Consumable instead of Raw material.
Due to this excise invoices for these materials got captured and posted in RG23C register in place of RG23A register.
(Material document can not be reversed as material is already consumed.)
How these entries in RG23C/RG23A entries can be corrected?
Regards,
rajan

Hi,
Use following functions to adjust the duties in RG23A and RG23C;
Go to J1IH - Excise JV
Use following method to reduce duties from RG23C Accounts
Making Adjustment Postings for Other Transactions
Use: - You follow this procedure if you want to make an adjustment posting that does not fall into any of the other categories of adjustment offered by this function. You can only use an external document as your reference document.
Procedure: -
1. J1IH > Excise JV > Other adj.
2. Enter data as required, including:
u2022 Document number
Enter the number of the external document that you want to refer to.
u2022 CENVAT account selection group box
Specify which account is affected by the adjustment posting is for. Here in your case select RG23C.
3. Click on u201CEnteru201D button.
The system displays the information from the material document.
4. Adjust the posting date as necessary and enter Vendor code as per requirement.
5. Enter the amount of excise duty in either of the following ways:
u2022 To enter line items for different materials and the excise duty accordingly, choose u201CDetailsu201D button and enter the line items in the table.
Here fill details like Material Code, Quantity as per Excise Invoice, Batch No, Reference (i.e. GRN Document), BED and Ed Cess Amount manually.
If you want system to propose the BED and Ed Cess Amount, Click on u201CGet Excise Invoiceu201D button and select the proper Excise Invoice from which the proportionate amount is to be copied.
Select the u201CExcise Invoiceu201D and click on u201CContinueu201D button.
It will copy BED and Ed Cess and SECess amount as per the quantity mentioned here. It will be proposed in proportion of selected Excise Invoice quantity and value.
u2022 To enter the excise duty only, choose u201CHeaderu201D button and enter the excise duty in the totals fields at the foot of the screen.
6. Specify which G/L accounts are to be posted to.
7. Save the adjustment posting.
System will post Excise JV Document; Accounting Document with Part2 Serial No has been successfully created.
Use following method to take duty credit in RG23A Accounts
Making Adjustment Postings for Additional Excise Paid by Vendors
Use: - You follow this procedure if a vendor has increased the amount of excise duty that it originally charged you and you want to debit the difference to your CENVAT account.
Procedure: -
1. J1IH > Excise JV > Additional excise.
2. Enter data as required.
In the Document number field, enter then number of the document sent to you by the vendor.
u2022 CENVAT account selection group box
Specify which account is affected by the adjustment posting is for. Here in your case select RG23A.
3. Click on u201CEnteru201D button.
4. Adjust the posting date as necessary and Enter Vendor Name.
5. Enter the amount of excise duty in either of the following ways:
u2022 To enter line items for different materials and the excise duty accordingly, choose u201CDetailsu201D button and enter the line items in the table.
Here Enter Material code, quantity as per excise invoice, reference document (i.e. GRN Document), batch no., BED and Ed Cess Amount to be posted.
u2022 To enter the excise duty only, choose u201CHeaderu201D button and enter the excise duty in the totals fields at the foot of the screen.
6. If the duty qualifies as countervailing duty (CVD):
a. Select CVD applicable.
b. Enter the CVD amount in the BED amount field.
7. Specify which G/L accounts are to be posted to.
8. Save the adjustment posting.
System will post Excise JV Document; Accounting Document with Part2 Serial No has been successfully created.

Material shortage ( soft or hard error ) while releasing production order?

Hi Guys
I am a SAP tech guy wrote a BDC program to release production order. It worked fine in one enviroment but not working another enviroment saying ..Material shortage.
My BDC program can't afford any hard errors in the process. The execution stop abruptly for any hard error.
How to change that Material shortage from hard error to soft error or any info message.
Any ideas? any thing to do with material master or spro?
Thanks
Hari

Hi
You can make settings in SPRO, so that the material availability check will not restrict you to go further...
follow the path:
SPRO>Production->Shop floor control>Operations->Availability Check-->Scope of check
There you will find the settings for order creation and release (1 & 2)..
You have remove the restriction there.
Regards
Bala

How to enter / Post Goods receipt of Raw Material from subcontractor

Dear Experts,
As standard subcontracting procedure, Raw Material Transfer posting is made to Subcontracting Vendor
and the Semi finished material [Assembly] is received from the subcontractor.
If in case extra or by any reason, raw material stock is with subcontractor, he want to return the raw material stock.
How to receive raw material stock from subcontracting vendor and how to handle subcontracting challan transactions in SAP ?
Thanks in Advance !

Hi,
>>Receive the RM using MB1B / 542
>> Reconcile using J1ifq
>> Complete challan using J1if13
Thanks,
Rajoo

In time Consumption of Raw material in case of Subcontracting

HI Gurus
Please look into the following issue.
Presently we are sending Raw material to subcontracting vendor through 541 mvt type along with excis challan.Then subcontractor intimates raw material consumption details time to time through mail/fax.Now as per client requirement raw material consumption should be done in time i.e. when they are receiving raw material consumption details. They don't want book the raw material consumtion at the the time of receipt of finish goods.
Please guide me to book in time consumption of raw material.
Redards
Kumar

Thnks for your reply.
I want to do the manual consumption from subcontracting stock. Client don't want to book the consumption at the the time of raw material transfer to subcontractor. Also there will be problem in subcontracting challan reconcillation.
We can't do the manual consumption through 543 mvt type .Is there any workarround for this ?

Raw material shortage

Similar Messages

Maybe you are looking for