Re:The console changes

Hi,
We are facing an issue where we are trying to make the changes through the console, but the console is not taking the changes even though we are making changes as administrator.
<Nov 12, 2010 1:07:54 PM EST> <Error> <Console> <BEA-240003> <Console encountered the following error java.rmi.RemoteException
: [Deployer:149150]An IOException occurred while reading input. : with response code '401' : with response message 'Unauthoriz
ed'
at weblogic.deploy.service.internal.transport.http.HTTPMessageSender.sendMessageToServerURL(HTTPMessageSender.java:297
at weblogic.deploy.service.internal.transport.http.HTTPMessageSender.sendMessageToTargetServer(HTTPMessageSender.java:
123)
at weblogic.deploy.service.internal.transport.CommonMessageSender$1.run(CommonMessageSender.java:283)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>
<Nov 12, 2010 1:25:26 PM EST> <Warning> <netuix> <BEA-423420> <Redirect is executed in begin or refresh action. Redirect url i
s /console/console.portal?_nfpb=true&_pageLabel=WebAppApplicationOverviewPage&WebAppApplicationOverviewPortlethandle=com.bea.c
onsole.handles.AppDeploymentHandle%28%22com.bea%3AName%3Dccrs%2CType%3DAppDeployment%22%29.>
<Nov 12, 2010 1:29:08 PM EST> <Error> <NodeManager> <BEA-300034> <Could not execute command "kill" for server "ccportalServer1
" using the node manager. Reason: Connection refused. Couldn't connect to NodeManager. Check that it is running at localhost:5
556.>

Similar Messages

Sound Blaster Extreme Music do not detect changes on the console

I'm using the sound blaster X-Fi XtremeMusic with Logitech Z-5500 and the Flexi Jack, connected on Digital mode (Using Coaxial and Optical). The OS? Is Windows Vista Ultimate 32 Bits.
The problem at this moment is that I can not make any change on the console configuration, I mean, if I change the speaker connection or change any parameter of the configuration has no reaction,I even change the EAX effects, the CMSS-3D ad nothing happen, all that I can control with the console launcher is the volume.
I reinstall the drivers and download from the website the latest drivers I found and same problem.
?Any help?
THANKS?

Choose Soundblaster in the dropdown box and you will see XFi listed , you will find the latest drivers there....Seems rather strange to me since this is a XFi card, but hey I did not design the Website......
Message Edited by warriorking on 03-05-200706:40 PM

Can you change the color of the output in the console?

When you run your program using NetBeans the color of the output in the console window is black. Is there any way to change the color of the output to say blue?

Hi AJL,
There is no way to color rows of the table control in a SUDialog. You could consider using the ActiveX container control and using the Microsoft ActiveX table control, which might have that functionality. Note though, that then you need to either ensure that control is always on all your client machines or make provisions for it to be installed/registered.
Brad Turpin
DIAdem Product Support Engineer
National Instruments

Weblogic console - the button "change & lock" is missing

I just installed weblogic 10.3.5 server in my PC, and found in weblogic console, on the left pane – Change center, the button “change & lock” is missing. How could I get the button back?
Thank you very much!

Click in the admin console on Preferences, User Preferences and uncheck Automatically Acquire Lock and Activate Changes.
Than the Lock&Edit button will appear.

My 2011 Imac 27" has been crashing and running very erratically and slowly. The only change has been the update to 10.8.1, I will paste the consol kernal panic report. Is there a software conflict?

Hi, first time posting on the forum. I own a 2011 IMAC i5 with 12gb of ram 27 inch. Over the last five days the computer has been crashing and running very erratically. When the computer has crashed the entire computer has become unresponsive and frozen, requiring a reboot or two. At other times the computer has slowed way down and the dreaded spinning beachball has appeared and the computer takes its sweet time trying to process something. Iphoto has also crashed independently when the beahball will not disappear. THE entire system is running way below its usual stellar quad performance. I have run a ram test and everything has come back clean, I have fixed any broken permissions, and deleted any newly added software (starcraft2). There is over 250Gb of hard drive free and the activity monitor shows no unusual processes. The computer automatically updated it self recently to 10.8.1 has this caused a conflict with some software? Or is there a deeper problem?
Below are the console reports. There are also reports for unversalaccessd , mdworker, Isregister, loginwindow, iphoto, DMproxy which can be supplied.
Thanks for any help.
Richardx
Interval Since Last Panic Report: 337136 sec
Panics Since Last Report:          1
Anonymous UUID:
Sun Aug 12 20:59:17 2012
panic(cpu 3 caller 0xffffff80118b7b95): Kernel trap at 0xffffff801183fbea, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000000010, CR3: 0x00000000bddec000, CR4: 0x0000000000000660
RAX: 0xffffff8011e8eb04, RBX: 0x0000000000000000, RCX: 0xffffff8011e8eb00, RDX: 0x0000000000000000
RSP: 0xffffff817272bd90, RBP: 0xffffff817272bdc0, RSI: 0x00000000533ce620, RDI: 0xffffff802e075618
R8: 0x000000000002a1d7, R9: 0x0000000000000000, R10: 0xffffff8163066000, R11: 0x0000000000000201
R12: 0xffffff802e075618, R13: 0xffffff802e075620, R14: 0xffffff8048c3af58, R15: 0x0000000000000001
RFL: 0x0000000000010082, RIP: 0xffffff801183fbea, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000000010, Error code: 0x0000000000000000, Fault CPU: 0x3
Backtrace (CPU 3), Frame : Return Address
0xffffff817272ba30 : 0xffffff801181d5f6
0xffffff817272baa0 : 0xffffff80118b7b95
0xffffff817272bc70 : 0xffffff80118ce4ad
0xffffff817272bc90 : 0xffffff801183fbea
0xffffff817272bdc0 : 0xffffff801181a32a
0xffffff817272be50 : 0xffffff801184f990
0xffffff817272be80 : 0xffffff8011820abd
0xffffff817272beb0 : 0xffffff8011810448
0xffffff817272bf00 : 0xffffff80118195fb
0xffffff817272bf70 : 0xffffff80118a5ad6
0xffffff817272bfb0 : 0xffffff80118ced13
BSD process name corresponding to current thread: ScreenSaverEngin
Mac OS version:
12A269
Kernel version:
Darwin Kernel Version 12.0.0: Sun Jun 24 23:00:16 PDT 2012; root:xnu-2050.7.9~1/RELEASE_X86_64
Kernel UUID: 8D5F8EF3-9D12-384B-8070-EF2A49C45D24
Kernel slide:     0x0000000011600000
Kernel text base: 0xffffff8011800000
System model name: iMac11,3 (Mac-F2238BAE)
System uptime in nanoseconds: 213783527015426
last loaded kext at 26227504573982: com.apple.driver.AppleUSBCDC    4.1.21 (addr 0xffffff7f93a52000, size 16384)
last unloaded kext at 26341760265155: com.apple.driver.AppleUSBCDC    4.1.21 (addr 0xffffff7f93a52000, size 12288)
loaded kexts:
org.virtualbox.kext.VBoxNetAdp    4.1.6
org.virtualbox.kext.VBoxNetFlt    4.1.6
org.virtualbox.kext.VBoxUSB    4.1.6
org.virtualbox.kext.VBoxDrv    4.1.6
com.Cycling74.driver.Soundflower    1.5.1
com.apple.filesystems.afpfs    10.0
com.apple.nke.asp_tcp    7.0.0
com.apple.filesystems.msdosfs    1.8
com.apple.driver.AppleHWSensor    1.9.5d0
com.apple.driver.AppleBluetoothMultitouch    75.15
com.apple.filesystems.autofs    3.0
com.apple.iokit.IOBluetoothSerialManager    4.0.9f8
com.apple.driver.AGPM    100.12.69
com.apple.driver.AppleMikeyHIDDriver    122
com.apple.driver.AppleHDA    2.3.0f2
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport    4.0.9f8
com.apple.driver.AudioAUUC    1.60
com.apple.iokit.IOUserEthernet    1.0.0d1
com.apple.Dont_Steal_Mac_OS_X    7.0.0
com.apple.driver.ApplePolicyControl    3.2.6
com.apple.driver.AppleUpstreamUserClient    3.5.10
com.apple.driver.AppleMikeyDriver    2.3.0f2
com.apple.driver.AppleBacklight    170.2.3
com.apple.kext.AMDFramebuffer    8.0.0
com.apple.driver.ACPI_SMC_PlatformPlugin    1.0.0
com.apple.driver.AppleLPC    1.6.0
com.apple.driver.AppleMCCSControl    1.0.33
com.apple.AMDRadeonAccelerator    1.0.0
com.apple.driver.AppleIRController    320.15
com.apple.driver.AppleUSBCardReader    3.1.0
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
com.apple.BootCache    34
com.apple.iokit.SCSITaskUserClient    3.5.1
com.apple.driver.XsanFilter    404
com.apple.iokit.IOAHCIBlockStorage    2.2.0
com.apple.driver.AppleFWOHCI    4.9.5
com.apple.driver.AppleUSBHub    5.1.6
com.apple.driver.AirPort.Atheros40    600.70.23
com.apple.iokit.AppleBCM5701Ethernet    3.2.5b3
com.apple.driver.AppleAHCIPort    2.4.0
com.apple.driver.AppleUSBEHCI    5.1.5
com.apple.driver.AppleEFINVRAM    1.6.1
com.apple.driver.AppleRTC    1.5
com.apple.driver.AppleACPIButtons    1.6
com.apple.driver.AppleHPET    1.7
com.apple.driver.AppleSMBIOS    1.9
com.apple.driver.AppleACPIEC    1.6
com.apple.driver.AppleAPIC    1.6
com.apple.driver.AppleIntelCPUPowerManagementClient    196.0.0
com.apple.nke.applicationfirewall    4.0.39
com.apple.security.quarantine    2
com.apple.driver.AppleIntelCPUPowerManagement    196.0.0
com.apple.security.SecureRemotePassword    1.0
com.apple.driver.AppleBluetoothHIDKeyboard    165.5
com.apple.driver.AppleHIDKeyboard    165.5
com.apple.driver.IOBluetoothHIDDriver    4.0.9f8
com.apple.driver.AppleMultitouchDriver    235.27
com.apple.kext.triggers    1.0
com.apple.iokit.IOSerialFamily    10.0.6
com.apple.driver.DspFuncLib    2.3.0f2
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport    4.0.9f8
com.apple.iokit.IOAudioFamily    1.8.9fc9
com.apple.kext.OSvKernDSPLib    1.6
com.apple.iokit.IOSurface    86.0.2
com.apple.iokit.IOBluetoothFamily    4.0.9f8
com.apple.iokit.IOFireWireIP    2.2.5
com.apple.driver.AppleGraphicsControl    3.2.6
com.apple.driver.AppleBacklightExpert    1.0.4
com.apple.driver.AppleSMBusPCI    1.0.10d0
com.apple.driver.AppleSMC    3.1.3d11
com.apple.driver.IOPlatformPluginLegacy    1.0.0
com.apple.driver.AppleHDAController    2.3.0f2
com.apple.iokit.IOHDAFamily    2.3.0f2
com.apple.driver.IOPlatformPluginFamily    5.2.0d16
com.apple.driver.AppleSMBusController    1.0.10d0
com.apple.iokit.IOAcceleratorFamily    19.0.26
com.apple.iokit.IONDRVSupport    2.3.4
com.apple.kext.AMD5000Controller    8.0.0
com.apple.kext.AMDSupport    8.0.0
com.apple.iokit.IOGraphicsFamily    2.3.4
com.apple.iokit.IOUSBHIDDriver    5.0.0
com.apple.iokit.IOSCSIBlockCommandsDevice    3.5.1
com.apple.iokit.IOUSBMassStorageClass    3.5.0
com.apple.driver.AppleUSBMergeNub    5.1.5
com.apple.driver.AppleUSBComposite    5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.5.1
com.apple.iokit.IOBDStorageFamily    1.7
com.apple.iokit.IODVDStorageFamily    1.7.1
com.apple.iokit.IOCDStorageFamily    1.7.1
com.apple.iokit.IOAHCISerialATAPI    2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily    3.5.1
com.apple.iokit.IOFireWireFamily    4.5.5
com.apple.iokit.IOUSBUserClient    5.0.0
com.apple.iokit.IO80211Family    500.15
com.apple.iokit.IOEthernetAVBController    1.0.2b1
com.apple.iokit.IONetworkingFamily    3.0
com.apple.iokit.IOAHCIFamily    2.2.0
com.apple.iokit.IOUSBFamily    5.1.6
com.apple.driver.AppleEFIRuntime    1.6.1
com.apple.iokit.IOHIDFamily    1.8.0
com.apple.iokit.IOSMBusFamily    1.1
com.apple.security.sandbox    220
com.apple.kext.AppleMatch    1.0.0d1
com.apple.security.TMSafetyNet    7
com.apple.driver.DiskImages    344
com.apple.iokit.IOStorageFamily    1.8
com.apple.driver.AppleKeyStore    28.18
com.apple.driver.AppleACPIPlatform    1.6
com.apple.iokit.IOPCIFamily    2.7
com.apple.iokit.IOACPIFamily    1.4
com.apple.kec.corecrypto    1.0
System Profile:
Model: iMac11,3, BootROM IM112.0057.B01, 4 processors, Intel Core i5, 2.8 GHz, 12 GB, SMC 1.59f2
Graphics: ATI Radeon HD 5750, ATI Radeon HD 5750, PCIe, 1024 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54313235533654465238432D48392020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54313235533654465238432D48392020
Memory Module: BANK 0/DIMM1, 4 GB, DDR3, 1333 MHz, 0x859B, 0x435435313236344243313333392E4D313646
Memory Module: BANK 1/DIMM1, 4 GB, DDR3, 1333 MHz, 0x859B, 0x435435313236344243313333392E4D313646
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.70.23-P2P
Bluetooth: Version 4.0.9f8 10405, 2 service, 18 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST31000528AS, 1 TB
Serial ATA Device: PIONEER DVD-RW DVRTS09
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: External HDD, 0x1058 (Western Digital Technologies, Inc.), 0x0900, 0xfa140000 / 5
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa120000 / 4
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 3
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 6
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: IEEE-1284 Controller, 0x067b (Prolific Technology, Inc.), 0x2305, 0xfd140000 / 5
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd110000 / 4
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 3

Update Soundflower to the most recent version. You have an unsupported edition. http://code.google.com/p/soundflower/downloads/detail?name=Soundflower-1.6.6b.dm g&can=2&q=

How do I sort out the troubles on the console?

Gmail - [#SAM-621717]: Trial of home intego          15/03/13 10:59 PM
[#SAM-621717]: Trial of home intego
2 messages
Intego Support <[email protected]> Reply-To: [email protected] To: mlkessell@**** Cc: monicakessell02@****
Hello Monica,
Fri, Mar 15, 2013 at 3:52 AM
If the accounts are on the same computer, you should not have to use a different e-mail address. If your son's account is not an Administrator account, this may be the issue. Are you able to launch VirusBarrier from your son's account from Applications>Intego?
Kind Regards,
John Intego Support Team
____________________________________________________________________ Intego Technical Support          http://www.intego.com/support
User manuals are available from the 'Help' menu in all Intego software. Keep up-to-date with the latest Mac security information.
Visit the Intego Mac Security Blog: http://www.intego.com/mac-security-blog/ Follow us on Twitter: @IntegoSecurity
Facebook: http://www.fa****.com/Intego ____________________________________________________________________
Monica Kessell <monicakessell02@****>          Fri, Mar 15, 2013 at 10:55 PM To: [email protected]
Yes I am able to do that and the issue that we were having seems to have settled down after the computer crashed and I restarted it by resetting PRAM and repairing the disk. Can you help me understand what to do about the issues that the console in utilities is logging frequently? both before and since the crash yesterday; (see below)
First issue; An instance 0x10062c110 of class CBX5KeyboardObservationController was deallocated while key value observers were still registered with it. Observation info was leaked, and may even become mistakenly attacked to some other object. set a breakpoint on NSKVODeallocateBreak to stop here in the debugger. Here's the current observation info: .......
(lots of stuff I don't understand)
Monica Kessell <monicakessell02@****>
Gmail - [#SAM-621717]: Trial of home intego          15/03/13 10:59 PM
Second Issue; barrier.daemon[51] launcht l: Error unloading:com.intego.virusbarrier.bm_controller barrier.daemon[51] launcht l: Error unloading:com.intego.virusbarrier.bm_injector_32 barrier.daemon[51] launcht l: Error unloading:com.intego.virusbarrier.bm_injector_64 com.apple.launchd[1] (com.apple.xprotectupdater[25]Exited with exit code:252 e.WindowServer[95]Fri Mar 15 21:54;39 monica-kessellsimac. local WindowSever[95] <Error>: kCGErrorFailure: set a breakpoint @ CGErrorBreakpoint() to catcherrors as they are logged. d.peruser .501[146] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple ReportCrash.Self d.peruser .501[146]          (com.apple.mrt.uiagent[178])Exited with exit code 255 tions.enabled[186] launchct l : CFURLWriteDataAndPropertiesToResource(/var/db/launchd.db/ com.apple.launchd.peruser.501/overides.plist) failed:-10 d.peruser.501[146] (com.apple.Kerberos.renew.plist[179]) Exited with exit code: 1 tions.enabled[186] launchct l : CFURLWriteDataAndPropertiesToResource(/var/db/launchd.db/ com.apple.launchd.peruser.501/overides.plist) failed:-10 es.integomenu[185] objc[185]:ClassIFCrossCompatibleUnicodeString is implemented in both /Library/Intego/Family Protector.bundle/Contents/MacOS/Family Protector Daemon.app/Contents/ Frameworks/Family Protector Foundation.framework/Versions/A/Family ProtectorFoundation and /Library/Intego/ personalbackupd.bundle/Contents/MacOS/Personal BackupDaemon.app/Contents/ Frameworkds/PersonalBackup.framework/Versions/A/PersonalBackup. One of the two will be used. Which one is undefined
and there are more messages like this regarding the Class IFTimeIntervalManager and the Class IFUUID and the Class IFMessanger and the Class IFMessangerClient and the class IFMessangerLion and the class IFMDelayed Messange and the Class IFSnowReply and the Class IFMessagerSnow and the Class IFMessanger and the Class IFMLionReply
and on and on the messages go
Can you shed some light on the subject and help me sort out the computer?
regards
Monica Kessell
<Emails Edited By Host>

Here's my latest list of complaints to Intego regarding Family Protector. I thought it should be shared:
I have been using Family Barrier for a couple of years now, and may I say, it has so many problems that as soon as I can find a better alternative, I'm gone. Until that day, however, I expect some solutions.
Issue #1: The application is 100% unreliable. The chances of it doing its job on any given day are seriously 50/50. Or worse. This alone renders the program useless. But that's not all.
Issue #2: It's unbelievably easy to override. Are you seriously unaware that all one has to do is change the date on the computer to one before Family Barrier was installed, it will 100% not do its job. Awesome. This is straight out of Hacking 101, and any program should be able to defend against it. Otherwise, any demo I try download can be made to work forever. While some are, most are not. Get it together, People.
Of course, making time changes impossible can be done from my end by the keeping admin password unknown to the protected user, but what if the protected user needs admin access? That happens to be my case. Nonetheless, I was willing to block admin access to fix the problem until you could tell me that YOU'VE done your job and taken care of it (you will tell me that, right?). But then I was left with Issue #1 (remember? the one where it only works 50% of the time at best?), so what's the point?
I thought I'd try reinstalling it again, just for fun. I've done this before and it's worked TEMPORARILY (tell me the truth, would you pay for an application that constantly had to be re-installed so that it would work for a while? the truth, now). Why am I not surprised that now even that simple process is f'ing up. I punch in my name and serial and it won't accept it. Is there no end to the awesomeness? Somehow, I think that there is not.
It's especially frustrating that there is no support number for me to call, forcing me to have to go through THIS process, which makes your job so much easier and is so much less helpful for your customers) just to get any answers... eventually.

[Solved] No sound on X, but it works on the console

I'm not sure what went wrong, so I'll tell the full story: I was struggling to get the Catalyst driver working. I have a Dell 5547, which has two graphics cards, an Intel HD 4400 and a Radeon R7 M260. I had installed the packages catalyst-hook and catalyst-utils-pxp from Vi0l0's repositories, but couldn't start X when I switched to the AMD card. Eventually, I downgraded to Xorg 1.14, also from Vi0l0's repositories, and now I was able to start X with both graphic cards. I'd read on The AMD/ATI Bar & Grill that downgrading to the Linux kernel 3.15.8 solved Daniel.White's problems, so I downloaded the corresponding linux and linux-headers packages from the Arch Rollback Machine. Later, I installed the last Linux kernel (version 3.16.1) and verified that I could still start X with both cards.
Before downgrading to Xorg 1.14, I installed Gnome 3 and everything worked great. I could listen to my music and watch videos on YouTube. Somewhere along the way, however, my sound stopped working. I'm using pulseaudio, and even after changing the settings using pavucontrol, I still can't get the audio to work -- on X. Sound works great on the console, but it refuses to work after I start X.
When I boot my computer and open an audio file with, say, mplayer, it complains that the "Audio device got stuck!"
pavucontrol reports that I have two built-in audio devices. The first one is off, and the second is set to "Analog Stereo Duplex". If I turn it off and then back on, mplayer stops complainning, but no sound comes out. On the "Output Devices" tab, pavucontrol now says that I have a "Dummy Output". It reverts back to normal once I reboot the machine.
Here's some info I think might be useful:
/etc/asound.conf:
# Use PulseAudio by default
pcm.!default {
type pulse
fallback "sysdefault"
hint {
show on
description "Default ALSA Output (currently PulseAudio Sound Server)"
ctl.!default {
type pulse
fallback "sysdefault"
Output of aplay -L:
null
Discard all samples (playback) or generate zero samples (capture)
pulse
PulseAudio Sound Server
default
Default ALSA Output (currently PulseAudio Sound Server)
/proc/asound/cards:
0 [HDMI ]: HDA-Intel - HDA Intel HDMI
HDA Intel HDMI at 0xb0c10000 irq 65
1 [PCH ]: HDA-Intel - HDA Intel PCH
HDA Intel PCH at 0xb0c14000 irq 62
Please let me know if you need more information. Thanks for reading!
Last edited by revberaldo (2014-08-23 15:03:17)

Hi emeres, thanks for the answer. I edited /etc/modprobe.d/50-alsa-base.conf as you suggested, then rebooted.
$ cat /etc/modprobe.d/50-alsa-base.conf
options snd-hda-intel index=1
options snd-hda-intel index=0
$ aplay -l
aplay: device_list:268: no soundcards found...
$ lspci -nn | grep -i audio
00:03.0 Audio device [0403]: Intel Corporation Haswell-ULT HD Audio Controller [8086:0a0c] (rev 0b)
00:1b.0 Audio device [0403]: Intel Corporation 8 Series HD Audio Controller [8086:9c20] (rev 04)
While mplayer is trying to play an MP3 file, I ran:
$ lspci -nn | grep -i audio
00:03.0 Audio device [0403]: Intel Corporation Haswell-ULT HD Audio Controller [8086:0a0c] (rev 0b)
00:1b.0 Audio device [0403]: Intel Corporation 8 Series HD Audio Controller [8086:9c20] (rev 04)
I edited 50-alsa-base.conf once again and rebooted the system.
$ cat /etc/modprobe.d/50-alsa-base.conf
options snd-hda-intel index=1,0
$ aplay -l
aplay: device_list:268: no soundcards found...
$ lspci -nn | grep -i audio
00:03.0 Audio device [0403]: Intel Corporation Haswell-ULT HD Audio Controller [8086:0a0c] (rev 0b)
00:1b.0 Audio device [0403]: Intel Corporation 8 Series HD Audio Controller [8086:9c20] (rev 04)
I even tried adding this to 50-alsa-base.conf:
options snd-hda-intel index=1 model=auto vid=8086 pid=0a0c
options snd-hda-intel index=0 model=auto vid=8086 pid=9c20
Then rebooted. Nothing changed. I swapped the indexes and that didn't work either.
Then I exited Gnome and ran aplay -l on tty1:
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC3234 Analog [ALC3234 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA Intel HDMI], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA Intel HDMI], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA Intel HDMI], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
pgrep indicated that pulseaudio was indeed running, and I could play an MP3 with mplayer -ao pulse a.mp3. So, pulseaudio is running before X starts. I've checked my ~/.xinitrc and /etc/X11/xinit. Nothing there. That's crazy; what could be running that only affects X? Also, this problem is window-manager independent. It doesn't matter whether I'm running gnome3 or i3, I can't play audio inside X. If I go to tty3, for instance, sound works just fine.

Initializing with the console doesn't set indexes

Hi,
We want to change the basedn of a suffixe, from o=isp to o=Courrier,dc=domcomponent,dc=com. I exported my data using a db2ldif -U and modified my ldif with a sed. It seems that after I initialized my new suffixe with the console or the ldif2db.pl script, my indexes are not set. It takes many seconds (60) to receive the response of a basic ldapsearch. (e.g.:uid=tom) The db/Courrier/files has been generated during the initialization. After a reindex with the console (it takes 4 hours), the ldapsearch took 0 second to respond. How can I, index while initializing.
I'm running version Sun ONE 5.2 (Sun-ONE-Directory/5.2 B2003.143.0020)

Hi,
Ive experienced the same sort of problem, but have sorted it using either db2index or the console to re-index after initialisation.
According to the docs, re-initialisation should copy down indexes from the MAster server but this does not happen either.
Regards,
g8

How do I get to the console of a VM using UCS Director?

Is there a way with UCS Director to present users of the system the console of the VM like when you launch the VSphere Client and bring up the console? I can see that users can RDP into a running machine or connect to a web interface but that appears to assume the machine is accessible.

I did that twice. Once, about an hour ago. And nothing changed. I did it again about twenty minutes ago, and still nothing. A few minutes ago I tried yet another force quit. And .... that seemed to do the trick. The offending email message is gone.
So my problem seems to be solved.
But the larger issue remains of a major bug in Mac OS, it seems. If a dialogue box is larger than the screen size, how is someone ever going to be able to deal with closing it or anything else? It would make sense to automatically allow the cursor to scroll down to the very bottom of any dialogue box, regardless of its size. After all, that's how windows work, right?
Crazy!

ITunes throwing cryptic error to the console while lagging

Everytime I change a file attribute in iTunes or delete a song, iTunes throws the following error to the console:
2/24/12 12:33:35.677 PM mds: (Warning) FMW: event:1 had an arg mismatch. ac:2 am:51
it takes several seconds to switch between songs or perform any kinds of simple editing like editing comments
In addition to these fun time, I've been getting the following popup alert window periodically when I attempt to open iTunes:
"The iTunes application could not be opened. An unknown error has occurred (-50)."
what gives? Also what is "FMW"?
MBP 17" quad i7
Lion Latest Build
8 gig ram
14TB array

yes I did actually!
I removed an iTunes-specific plugin called "Quartz Composer Visualizer.bundle" and all of the 3rd party iTunes visualizers
While I was snooping around I also removed a collection of old kernel extensions with ancient modification dates that just happened to perpetually migrate into each version of the OSX I updated to.
it's probably in your best interest to remove any iTunes plugins you have and see if you can replace them one at a time (assuming you have itunes plugs) until you discover the bug.
Another issue I had was excessive firewire cable length (total accumulated firewire cablelength) . This interferes with iTunes' ability to do a lot of things incl playback through a firewire audio interface while reading the music off a firewire drive
let me know if this helps

How to bring SOA server UP in the console

Hi Friend
In application deployment >resourse Adapters> soa-infra is down
how to bring it up
In fusion middleware >weblogic Domain >soa_base_domain> i can see only adminserver,bam_server1 only i cannot able to see soa_server1
How to bring my soaserver in the console and bring it up
Advance in thanks
AT

Hi Friends
Yes , i tried in my cmd prompt like this
c:\Oracle\Middleware\user_projects\domains\Soa_base_domain\bin>startManagedWeblogic.cmd soa_server1
Now it has asked for user name and password i have given weblogic and welcome1 finally i get
<Mar 7, 2011 10:40:41 PM IST> <Notice> <WebLogicServer><BEA-000365> <Server state changed to FAILED>
<Mar 7, 2011 10:40:41 PM IST> <Error> <WebLogicServer><BEA-000383> <A critical service failed .The server will shutitself down>
<Mar 7, 2011 10:40:41 PM IST> <Notice> <WebLogicServer><BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
After this i checked
My both the console admin and soa server
In Admin console
In Environment > server
1)AdminServer(admin) >RUNNING >OK >7001
2)bam_server1 >LocalMachine >SHUTDOWN >9001 // thats all
in my soa server console
Deployment 89%completed 11% down
in that soa -infra is down
wsm-pm down
In fustion middleware
weblogicDomain>soa_base_domain > adminserver up and bam_server1 down
There is no soa_server1
Please help me out
In case adter deployment how can i test it
Thanks in advance
AT

Macbook Freezes every one hour. On the console I could see only LKDCHelper Starting when the OS X 10.8.3 Freezes

Hi
Macbook Pro (OS X 10.8.3) keeps freezing everyone hour. On the console I could see only "LKDCHelper Starting" message whenever MBP freezes. I dont see any other message. So, far, I have tried doing all the below.
1. Did a hardware test.
2. Started in safeboot.
3. Booted in the recovery mode and verified disk and verified permission
4. Reinstalled the OS X
Not sure whatelse I could do, could you please help?
Here is one of the logs. MBP froze exactly at 8:21.
3/31/13 8:17:37.981 AM com.apple.launchd[1]: (com.apple.quicklook.satellite.BDFDFD6C-3D03-49A0-9397-2478A7BBE583[736]) Exited: Killed: 9
3/31/13 8:17:57.979 AM com.apple.launchd[1]: (com.apple.qtkitserver[739]) Exit timeout elapsed (20 seconds). Killing
3/31/13 8:17:57.979 AM com.apple.launchd[1]: (com.apple.qtkittrustedmoviesservice[740]) Could not terminate job: 3: No such process
3/31/13 8:17:57.979 AM com.apple.launchd[1]: (com.apple.qtkittrustedmoviesservice[740]) Using fallback option to terminate job...
3/31/13 8:21:55.400 AM LKDCHelper[764]: Starting (uid=501)
3/31/13 8:23:24.126 AM com.apple.usbmuxd[21]: _heartbeat_failed heartbeat detected detach for device 0x35-192.168.2.5:0!
3/31/13 8:26:34.475 AM coreservicesd[61]: SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending notification kLSNotifyBecameFrontmost to notificationID=351
3/31/13 8:26:34.476 AM coreservicesd[61]: SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=351
Any Help? Thanks for your time.
Thanks
Vasanth

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins,* log out of your account, and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

Suspicious activity in the console log

I was looking at my Macbook Pro's console log and there are some suspicious items in there.
For example:
sudo killall -HUP mDNSResponder , IP Address changes, websites I’ve never visited, and something called x-terminal that keeps popping up on my desktop.
I have only used my Macbook for internet browsing and have never run or entered any computer codes in the console log.
Is there an explanation? Is it possible that any of the above could be run without me doing anything?

try upgrading to at least 10.4.4 of mac OS as there may be an issue with 6.0.3 running on 10.3.9...that might fix it

Print out to the console

I'm writing a program to update something to the console. Let's say I have some fields like this:
client1 Name1 ID1 value1
client2 Name2 ID2 value2
the number of client could be changed, but not much. I would like to update the value field on the console, say, every 5 seconds.
How I could do that? It's much like some Linux/Unix program as top. System.out.println surely doesn't do the job.
Thanks in advance for your help.

Well, I'm new to gui application on linux. Couldyou
tell me in a few words how to do it? Which libraryI
should use? Thanks,Look into swing, it's a part of the standard library.Swing couldn't run on Linux/Unix without X server requirement. What I need is a terminal based application.

Dose Hyper-V 2012 R2 support the consoles of 500+ Win7 VMs are connecting by vmconnect at the same time?

Dear Experts,
I have 500+ Win7 VMs in Hyper-V 2012 R2. I'd like provide my guys to access these Win7 VMs' console using Virtual Machine Connection (VMConnect) w/ Enhanced Session Mode. My guys are simple workers. I assume they may execute a bat file(vmconnect [<Servername>
<VMName>]) from the command prompt, then access their Win7 VM console and copy/paste into the virtual machine. So, there may be 500+ Win7 VMs are interacting with like physical computers. My question is if Hyper-V 2012 R2 have limitation when the
consoles of 500+ Win7 VMs are connecting at the same time. Please kindly offer some guide. Really appreciated for the help!
Best Regards,

Well, the server has stayed up and running.
The Only thing I can put it down to is that I disabled a scheduled task that is supposed to cause the server to BSOD/memory dump when a specific event ID happens. We did this several months ago as GRT generation in CA D2D backup was causing the server to
become unresponsive and required "Turn Off" in Hyper V Manager. We scheduled a util called "NotMyFault" which was supposed to trigger when an event ID happened only during the D2d backup. That fault was cured long ago by an undocumented
config of afstor.ini, but the scheduled task was left in place. The task never triggered - or at least there were no events showing it had triggered and in the task history, the last time was a month ago. Funny though how it was the ONLY change I made yesterday
and the server stayed up. I will monitor for the next few days, and if the server is OK, then must conclude that it was the cause. I suppose I could re-enable it at some point to prove the point.

Re:The console changes

Similar Messages

Maybe you are looking for