Read per axis status / run-stop don't work at low speed

Hello,
This is my fisrt motion program. I don't understand why the "read per axis status" don't send me the correct status for "run/stop" (only this status) when I run a low speed. The other status are all right. Impultions are still generated (In realyty motor run...)
I put a simple example to illustrate. Perhaps is it a wrong configuration in MAX but this seems unlikely. I can't join my Max config because ".nce" are not accepted in attached files.
Thank you wery much
Attachments:
One-Axis Move (Accel - Max Velocity - Decel) with read status.vi ‏26 KB

I realize this is an old post but wanted to post the solution in case others run across it. The reason the indicator is not working at low speeds is because it operates on a threshold. The default setting is for it to display false when running under 4000 steps or counts per second. Refer to KnowledgeBase 4XHD6DZY: Why does my Run/Stop bit not appear active while my motor is running?
Alex Person
NI-RIO Product Support Engineer
National Instruments

Similar Messages

Read multiple axis status

The problem is the slowness of some commands in Labview 8.2 (winxp and PXI-8105 controller)
I am trying to control the speed of a three axis robot using a PXI-7350 motion controller, but I need to update very fastly the control loop (1-2ms)
I found that the more time consuming functions are "read per axis status" and "load velocity".
These are probably the main issues to be considered
1. I need only to read the "motor off", "following error", "Move Complete" while the "read per axis status"returns many other variables.
2. Both the vi must be called three times, one time for each axis.
Is it possible to build a single vi that, using a single command, queries the motion controller only for few specified variables and sets all the axis velocities?
In case, the variables are:
"motor off"
"following error"
"Move Complete"
"vector space position"
Thanks

The application is: to move the end effector as a function of an
analog feedback signal, avoiding auto-collision (like moving a robot
with a joystick).
The problem is that the signal is correlated to
the motor displacements via a unlinear process so the control board
cannot be configured using that signal. I have to measure the signal
and to calculate on the fly the velocities of the motor that make the
end effector follows the feedback signal. I need to optimize the
"control loop" in order to avoid vibrations, jitter and to permit the
PXI to make other things like data communication with other pc in the
network. Another important issue is the critical routine for
auto-collision avoiding: the robot must stop as soon as particular
combination of axes position occurs.
It's incredible, I
spent so much time in optimizing the kinematic calculations (a 9x9
non-linear sistem of equations solved in 2ms) and now I see that the
critical routine is the communication between PXI-controller and motion
controller!!!
(I know that the best solution would be to
build a motion controller by myself using a NI-FPGA device, but I
really don't know how to implement a matrix inversion calculation on a
FPGA processor...)
Fabrizio Patanè

Run form don't work

Hi
I have install in a PC4 with windows XP professional Oracle EM 9.2 and 9iDS (Form Builder [32 bit]. Use the layout wizard to make the form, but when I call Run Form open the IE or Netscape and both browsers never ends to open the form:
http://tritoni2:1521/forms90/f90servlet/admin?form=C:\oraclei\fomas_enc\identif_enc.fmx&userid=GHC/1QAZXSW2@oaxsiers&buffer_records=NO&debug_messages=YES&array=YES&query_only=NO&quiet=NO&RENDER=YES
I review the preferences and appear are correct but don't work.
Any suggestion is welcome.
Best regards
Gilberto Hernandez Cardenas

well, IE only send the message "500 Internal Server Error" and the nexts:
java.lang.NullPointerException
     at java.io.FileInputStream.open(Native Method)
     at java.io.FileInputStream.<init>(FileInputStream.java:64)
     at java.io.FileReader.<init>(FileReader.java:38)
     at oracle.forms.servlet.ConfigFileParser.<init>(Unknown Source)
     at oracle.forms.servlet.FormsServlet.getOracleHome(Unknown Source)
     at oracle.forms.servlet.FormsServlet.testJNI(Unknown Source)
     at oracle.forms.servlet.FormsServlet.doGet(Unknown Source)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:244)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
     at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:59)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
     at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:523)
     at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:269)
     at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:735)
     at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.HttpRequestHandler.run(HttpRequestHandler.java:243)
     at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].util.ThreadPoolThread.run(ThreadPoolThread.java:64)

HT4914 I have many books stored on my devices ,iPhone, mini IPad and an older Itouch. I love reading but now at 72 eyes don't work as well so I listen to books. They are stored in wav format. Most sections are under 200 mb can I use I match to consolid

I have many books on three devices. They are in WAV format with each part most likely less than 200 MB, I've heard of the new thing ITunes Match where all your WAV music is stored and can be accessed by any device. I don't listen to much music so it would be a waste if it is only good for WAV MUSIC And not WAV BOOKS. DOES ANY ONE KNOW THE ANSWER TO MY QUESTION. Sorry about caps I also type slow.

Sorry if this comes to late, I just now came across this thread. I have rtorrent and rutorrent sunning successfully on my x64 Arch Linux install.
Try putting the "SCGIMount /RPC2 127.0.0.1:5000" line in your httpd.conf file right after the LoadModule lines (it's line 124 for me).
I seem to recall it not working when I put it at the end of the file.
Best of Luck!
Martian

Reader don't work with one of the tree users?

Reading files on the internet also don't works! On other two accounts everthing works fine?
Thnks

What is your operating system & version?
What is your web browser?
What is your Reader version?
What exactly means "don't works"?

F110 Payment run stopped, status Payment run has been carried out.

Hi experts,
I have searched in this forum but didn't find suitable scenario.
I have run automatic payment after the proposal created.
Somehow the payment run status stopped at "Payment run has been carried out".
Then I check the payment run log:
Job started
Step 001 started (program SAPF110S, variant &0000000007737, user name xxxxxx)
Log for payment run for payment on xx.xx.2009, identification XXxxx
System error occurred during blocking attempt; payment run stopped
... the execution of the payment program is terminated
End of log
Job finished
I thought no accounting document has been posted.
Is it the right way if I re-run the program SAPF110S with its variant?
What is the possible impact.
Kindly advise.
regards,
rob

Hi,
Yes there might be no accounting document has been posted because even though the payment run has been carried out but parameters you have mentioned might not been selected because of many reasons.
Please go to EDIT - Payment -
Payment list and exception list.......
Please check if any entry is there in payment list if it is than some doc has been posted.
Rest will go to EXCEPTION list.... will show you the exact errors.
Please check the same in the proposal run first... it seems that PROPOSAL run in not only correct.
See the error and correct it.

My Finder is going crazy. Keep getting a message saying it quit unexpectedly and asking if I want to restore windows, but I can't get it to stop. buttons don't work.

My Finder is going crazy. Keep getting a message saying it quit unexpectedly and asking if I want to restore windows, but I can't get it to stop. buttons don't work.

Something else you can try.
In Finder hold down the option/alt key while selecting the Go menu item. Select Library. Then go to Preferences/com.apple.finder.plist. Move the .plist to your desktop.
Restart and test. If it works okay, delete the plist from the desktop.
If the same, return the .plist to where you got it from, overwriting the newer ones.
If you want to make your user library permanently visible, run the below command in Applications/Terminal.
chflags nohidden ~/Library/
You will need to do that after any updates.

SAP dispatcher status is stopped in Console how can i start it

Hi All
Help me out
*SAP dispatcher status is stopped in Console how can i start it
Dispatcher turns green to yellow suddenly and status changes to stopped and all WP elemets shows status as ended.
Alert from Syslog : SAP Basis System: Message server disconnected
Tracert : Disp+work.exe
trc file: "dev_disp", trc level: 1, release: "640"
Thu Oct 02 12:32:52 2008
kernel runs with dp version 128(ext=102) (@(#) DPLIB-INT-VERSION-128)
length of sys_adm_ext is 312 bytes
systemid   560 (PC with Windows NT)
relno      6400
patchlevel 0
patchno    21
intno      20020600
make:      multithreaded, ASCII
pid        736
***LOG Q00=> DpSapEnvInit, DPStart (00 736) [dpxxdisp.c   1100]
     shared lib "dw_xml.dll" version 21 successfully loaded
     shared lib "dw_xtc.dll" version 21 successfully loaded
     shared lib "dw_stl.dll" version 21 successfully loaded
     shared lib "dw_gui.dll" version 21 successfully loaded
Thu Oct 02 12:32:58 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3886]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: JAVA is not active
DpShMCreate: sizeof(wp_adm)          6624     (828)
DpShMCreate: sizeof(tm_adm)          2219848     (11044)
DpShMCreate: sizeof(wp_ca_adm)          18000     (60)
DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
DpShMCreate: sizeof(comm_adm)          192000     (384)
DpShMCreate: sizeof(vmc_adm)          0     (320)
DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY          (addr: 05270040, size: 2505416)
DpShMCreate: allocated sys_adm at 05270040
DpShMCreate: allocated wp_adm at 052717A8
DpShMCreate: allocated tm_adm_list at 05273188
DpShMCreate: allocated tm_adm at 052731B0
DpShMCreate: allocated wp_ca_adm at 054910F8
DpShMCreate: allocated appc_ca_adm at 05495748
DpShMCreate: allocated comm_adm_list at 05496EB8
DpShMCreate: allocated comm_adm at 05496ED0
DpShMCreate: allocated vmc_adm_list at 054C5CD0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 054C5CF8
DpShMCreate: allocated wall_adm at 054C5D00
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 2450 MB
<ES> 2449 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( home) [dpxxdisp.c   9719]
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1025]
DpMsgAdmin: Set patchno for this platform to 21
Release check o.K.
Thu Oct 02 12:33:38 2008
ERROR => W0 (pid 1500) died [dpxxdisp.c   12170]
ERROR => W1 (pid 3796) died [dpxxdisp.c   12170]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W2 (pid 3548) died [dpxxdisp.c   12170]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W3 (pid 1464) died [dpxxdisp.c   12170]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W4 (pid 3368) died [dpxxdisp.c   12170]
ERROR => W5 (pid 3400) died [dpxxdisp.c   12170]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W6 (pid 2620) died [dpxxdisp.c   12170]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W7 (pid 380) died [dpxxdisp.c   12170]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-1500 (SIGUSR2)
ERROR => DpWpKill(1500, SIGUSR2) failed [dpxxtool.c   2468]
killing W1-3796 (SIGUSR2)
ERROR => DpWpKill(3796, SIGUSR2) failed [dpxxtool.c   2468]
killing W2-3548 (SIGUSR2)
ERROR => DpWpKill(3548, SIGUSR2) failed [dpxxtool.c   2468]
killing W3-1464 (SIGUSR2)
ERROR => DpWpKill(1464, SIGUSR2) failed [dpxxtool.c   2468]
killing W4-3368 (SIGUSR2)
ERROR => DpWpKill(3368, SIGUSR2) failed [dpxxtool.c   2468]
killing W5-3400 (SIGUSR2)
ERROR => DpWpKill(3400, SIGUSR2) failed [dpxxtool.c   2468]
killing W6-2620 (SIGUSR2)
ERROR => DpWpKill(2620, SIGUSR2) failed [dpxxtool.c   2468]
killing W7-380 (SIGUSR2)
ERROR => DpWpKill(380, SIGUSR2) failed [dpxxtool.c   2468]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 02 12:33:48 2008
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long)               Thu Oct 02 07:03:48 2008
========================
No Ty. Pid      Status Cause Start Err Sem CPU    Time Program Cl User         Action                    Table
0 DIA     1500 Ended         no      1   0             0
1 DIA     3796 Ended         no      1   0             0
2 UPD     3548 Ended         no      1   0             0
3 ENQ     1464 Ended         no      1   0             0
4 BTC     3368 Ended         no      1   0             0
5 BTC     3400 Ended         no      1   0             0
6 SPO     2620 Ended         no      1   0             0
7 UP2      380 Ended         no      1   0             0
Dispatcher Queue Statistics               Thu Oct 02 07:03:48 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
8
8
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id          13
wake_evt_udp_now     0
wake events           total     9, udp     7 ( 77%), shm     2 ( 22%)
since last update     total     9, udp     7 ( 77%), shm     2 ( 22%)
Dump of tm_adm structure:               Thu Oct 02 07:03:48 2008
=========================
Term    uid man user    term   lastop mod wp ta   a/i (modes)
Workprocess Comm. Area Blocks               Thu Oct 02 07:03:48 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 02 12:33:53 2008
NiISelect: TIMEOUT occured (5000 ms)
Shutdown server ...
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (676) (SOFT_KILL)
Stop icman
killing process (924) (SOFT_KILL)
Terminate gui connections
[DpProcDied] Process lives (PID:676 HANDLE:1564)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 02 12:33:54 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:676 HANDLE:1564)
[DpProcDied] Process died (PID:924 HANDLE:1556)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
NiIMyHostName: hostname = 'home'
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name          -, type 4, key -
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   9945]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 3 from selectset
MBUF state OFF
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/8
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 19)
MBUF component DOWN
NiBufClose: clear extensions for hdl 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 3 / socket 1572
MsIDetach: detach MS-system
EsCleanup ....
Thu Oct 02 12:33:55 2008
***LOG Q05=> DpHalt, DPStop ( 736) [dpxxdisp.c   8478]
Good Bye .....
Trace from WP table DIA 1
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, M
B
B Thu Oct 02 12:32:59 2008
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\SUD\SYS\exe\run\dboraslib.dll' ...
B Library 'C:\usr\sap\SUD\SYS\exe\run\dboraslib.dll' loaded
B Version of 'C:\usr\sap\SUD\SYS\exe\run\dboraslib.dll' is "640.00", patchlevel (0.19)
B New connection 0 created
M systemid   560 (PC with Windows NT)
M relno      6400
M patchlevel 0
M patchno    21
M intno      20020600
M make:      multithreaded, ASCII
M pid        1500
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 1500) [dpxxdisp.c   1160]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: JAVA is not active
M DpShMCreate: sizeof(wp_adm)          6624     (828)
M DpShMCreate: sizeof(tm_adm)          2219848     (11044)
M DpShMCreate: sizeof(wp_ca_adm)          18000     (60)
M DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
M DpShMCreate: sizeof(comm_adm)          192000     (384)
M DpShMCreate: sizeof(vmc_adm)          0     (320)
M DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY          (addr: 05A70040, size: 2505416)
M DpShMCreate: allocated sys_adm at 05A70040
M DpShMCreate: allocated wp_adm at 05A717A8
M DpShMCreate: allocated tm_adm_list at 05A73188
M DpShMCreate: allocated tm_adm at 05A731B0
M DpShMCreate: allocated wp_ca_adm at 05C910F8
M DpShMCreate: allocated appc_ca_adm at 05C95748
M DpShMCreate: allocated comm_adm_list at 05C96EB8
M DpShMCreate: allocated comm_adm at 05C96ED0
M DpShMCreate: allocated vmc_adm_list at 05CC5CD0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 05CC5CF8
M DpShMCreate: allocated wall_adm at 05CC5D00
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M calling db_connect ...
C Got ORACLE_HOME=C:\oracle\ora92 from environment
C Client NLS settings: AMERICAN_AMERICA.WE8DEC
C Logon as OPS$-user to get SAPSUD's password
C Connecting as /@SUD on connection 0 ...
C Attaching to DB Server SUD (con_hdl=0,svchp=040D325C,svrhp=040D3E34)
C Starting user session (con_hdl=0,svchp=040D325C,srvhp=040D3E34,usrhp=040DC614)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c      3721]
C Detaching from DB Server (con_hdl=0,svchp=040D325C,srvhp=040D3E34)
C *** ERROR => CONNECT failed with sql error '1033'
[dbsloci.c    9753]
C Try to connect with default password
C Connecting as SAPSUD/<pwd>@SUD on connection 0 ...
C Attaching to DB Server SUD (con_hdl=0,svchp=040D325C,svrhp=040D3E34)
C Starting user session (con_hdl=0,svchp=040D325C,srvhp=040D3E34,usrhp=040DC614)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c      3721]
C Detaching from DB Server (con_hdl=0,svchp=040D325C,srvhp=040D3E34)
C *** ERROR => CONNECT failed with sql error '1033'
[dbsloci.c    9753]
B ***LOG BV3=> severe db error 1033      ; work process is stopped [dbsh#2 @ 1195] [dbsh    1195 ]
B ***LOG BY2=> sql error 1033   performing CON [dblink#1 @ 419] [dblink 0419 ]
B ***LOG BY0=> ORA-01033: ORACLE initialization or shutdown in progress [dblink#1 @ 419] [dblink 0419 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c   1271]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   9379]
M
M Info for wp 0
M
M    stat = 4
M    reqtype = 1
M    act_reqtype = -1
M    rq_info = 0
M    tid = -1
M    mode = 255
M    len = -1
M    rq_id = 65535
M    rq_source = 255
M    last_tid = 0
M    last_mode = 0
M    int_checked_resource(RFC) = 0
M    ext_checked_resource(RFC) = 0
M    int_checked_resource(HTTP) = 0
M    ext_checked_resource(HTTP) = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M
M *****************************************************************************
M *
M * LOCATION    SAP-Server home_SUD_00 on host home (wp 0)
M * ERROR       tskh_init: db_connect
M *
M * TIME        Thu Oct 02 12:32:59 2008
M * RELEASE     640
M * COMPONENT   Taskhandler
M * VERSION     1
M * RC          13
M * MODULE      thxxhead.c
M * LINE        9555
M * COUNTER     1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 246]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 1500) [dpnttool.c   357]
Thanks in advance please help me out
Edited by: sudhakar aleti on Oct 2, 2008 12:54 PM
Edited by: sudhakar aleti on Oct 2, 2008 12:56 PM

Hi All please find the result r3trans -d
4 ETW000 r3trans version 6.09 (release 640 - 28.04.04 - 16:14:00).
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time   : 03.10.2008 - 11:02:35
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc     ,00000] Fri Oct 03 11:02:36 2008                            5494 0.005494
4 ETW000 [dev trc     ,00000] db_con_init called                                    40 0.005534
4 ETW000 [dev trc     ,00000] create_con (con_name=R/3)                             26 0.005560
4 ETW000 [dev trc     ,00000] Loading DB library 'dboraslib.dll' ...                33 0.005593
4 ETW000 [dev trc     ,00000] load shared library (dboraslib.dll), hdl 0        139566 0.145159
4 ETW000 [dev trc     ,00000]      using "C:\usr\sap\SUD\SYS\exe\run\dboraslib.dll"
4 ETW000                                                                              22 0.145181
4 ETW000 [dev trc     ,00000] Library 'dboraslib.dll' loaded                         7 0.145188
4 ETW000 [dev trc     ,00000] function DbSlExpFuns loaded from library dboraslib.dll
4 ETW000                                                                              13 0.145201
4 ETW000 [dev trc     ,00000] Version of 'dboraslib.dll' is "640.00", patchlevel (0.19)
4 ETW000                                                                            2501 0.147702
4 ETW000 [dev trc     ,00000] function dsql_db_init loaded from library dboraslib.dll
4 ETW000                                                                              12 0.147714
4 ETW000 [dev trc     ,00000] function dbdd_exp_funs loaded from library dboraslib.dll
4 ETW000                                                                              18 0.147732
4 ETW000 [dev trc     ,00000] New connection 0 created                              13 0.147745
4 ETW000 [dev trc     ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , con_max = 255, con_opt = 255, occ = NO
4 ETW000                                                                              15 0.147760
4 ETW000 [dev trc     ,00000] db_con_connect (con_name=R/3)                      12391 0.160151
4 ETW000 [dev trc     ,00000] find_con_by_name found the following connection for reuse:
4 ETW000                                                                              12 0.160163
4 ETW000 [dev trc     ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , con_max = 255, con_opt = 255, occ = NO
4 ETW000                                                                              14 0.160177
4 ETW000 [dev trc     ,00000] Found ORACLE_HOME=C:\oracle\ora92 in Registry        796 0.160973
4 ETW000 [dev trc     ,00000] -->oci_initialize                                    400 0.161373
4 ETW000 [dev trc     ,00000] Client NLS settings: AMERICAN_AMERICA.WE8MSWIN1252
4 ETW000                                                                           34020 0.195393
4 ETW000 [dbsloci.    ,00000] *** ERROR => Cannot connect: TNS-name missing         11 0.195404
2EETW169 no connect possible: "DBMS = ORACLE                           --- TWO_TASK = ''"
Thanks
Sudhakar A

HELP: Oracle VM Manager 3.1.1 VM Server Status Running (Error)

Hi All,
I have updated the latest patch of VM Manager 3.1.1. In my server pool, I have 3 VM servers.
All VM Server shows Status Running (Error). I don't care about the small red x icons displayed on the VM Manager but it stops all my operations:
1. Not able to Edit the virtual machine from one server.
OVMAPI_9013E Cannot perform operation on Virtual Machine: racnode1, no server available.
Wed Nov 07 14:29:32 PST 2012
2. Not able to Remove a VM Server from the Server pool
com.oracle.ovm.mgr.api.exception.RuleException: OVMRU_004004E: - Cannot delete server: vmsvr2.X.com, while it is in a server pool
Wed Nov 07 14:31:21 PST 2012
at com.oracle.odof.core.BasicWork.invokeMethod(BasicWork.java:151)
at com.oracle.odof.command.InvokeMethodCommand.process(InvokeMethodCommand.java:100)
at com.oracle.odof.core.BasicWork.processCommand(BasicWork.java:81)
at com.oracle.odof.core.TransactionManager.processCommand(TransactionManager.java:773)
at com.oracle.odof.core.WorkflowManager.processCommand(WorkflowManager.java:401)
at com.oracle.odof.core.WorkflowManager.processWork(WorkflowManager.java:459)
at com.oracle.odof.io.AbstractClient.run(AbstractClient.java:42)
at java.lang.Thread.run(Thread.java:662)
Caused by: com.oracle.ovm.mgr.api.exception.RuleException: OVMRU_004004E: - Cannot delete server: vmsvr2.X.com, while it is in a server pool
Wed Nov 07 14:31:21 PST 2012
at com.oracle.ovm.mgr.rules.modules.api.physical.ServerRules.onPersistableCleanPre(ServerRules.java:249)
at com.oracle.ovm.mgr.api.job.JobEngine.invokeMethod(JobEngine.java:662)
at com.oracle.ovm.mgr.api.job.JobEngine.invokeMethod(JobEngine.java:631)
at com.oracle.ovm.mgr.rules.RulesEngine.runRules(RulesEngine.java:190)
at com.oracle.ovm.mgr.rules.RulesEngine.preProcess(RulesEngine.java:142)
at com.oracle.ovm.mgr.model.ModelEngine.preValidate(ModelEngine.java:547)
at com.oracle.ovm.mgr.model.ModelEngine.access$200(ModelEngine.java:65)
at com.oracle.ovm.mgr.model.ModelEngine$3.notify(ModelEngine.java:352)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:325)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:289)
at com.oracle.odof.core.storage.Transaction.invokeMethod(Transaction.java:826)
at com.oracle.odof.core.Exchange.invokeMethod(Exchange.java:245)
at com.oracle.odof.core.Exchange.invokeMethod(Exchange.java:219)
at com.oracle.ovm.mgr.api.job.JobEngine.invokeMethod(JobEngine.java:744)
at com.oracle.ovm.mgr.api.manager.ModelManagerDbImpl.deleteObject(ModelManagerDbImpl.java:868)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:329)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:289)
at com.oracle.odof.core.storage.Transaction.invokeMethod(Transaction.java:826)
at com.oracle.odof.core.Exchange.invokeMethod(Exchange.java:245)
at com.oracle.ovm.mgr.api.manager.ModelManagerProxy.deleteObject(Unknown Source)
at com.oracle.ovm.mgr.api.manager.OvmManagerImpl.deleteObjectInternal(OvmManagerImpl.java:386)
at com.oracle.ovm.mgr.api.manager.OvmManagerImpl.deleteObject(OvmManagerImpl.java:409)
at com.oracle.ovm.mgr.api.manager.OvmManagerImpl.deleteObject(OvmManagerImpl.java:391)
at com.oracle.ovm.mgr.api.system.FoundryDbImpl.deleteServer(FoundryDbImpl.java:1007)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:329)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:289)
at com.oracle.odof.core.BasicWork.invokeMethod(BasicWork.java:136)
... 7 more
I can't help to complain. The VM Manager just have been so buggy. Can't anyone help!
Edited by: 969880 on Nov 7, 2012 2:33 PM
Edited by: 969880 on Nov 7, 2012 2:34 PM

I used to see this message in my Oracle VM.
Your all questions are the same root cause is cause from your VM Servers are not available. If you want edit or remove virtual machine is need your VM Servers are available. If you want to remove Server Pool is need all VM Server are removed from it first and also cannot deleted VM Servers too.
What you have to do first is make all VM Servers up and available.
Option1. You can try to restart VM Serer agent (ovs-agent) and Oracle VM Manager service (ovmm) and try to log out and log in.
Option2. Restore Oracle VM from backup with option --UUID of previous VM Manager.
Thanks and regards,
Vandy

Invoice split per customs status

Dear experts,
At my customer we want to split invoices per customs status. This means no Duty Paid and Duty Unpaid should be on 1 invoice, neither do mix with inward processing products....
The company only wants to use final invoices, so no proforma. This final invoices is created as soon as picking is done, so before goods issue, because they want to win time between requesting permission to load the truck and printing the invoice...
Goods issue is then done when the loading is finished and the truck shipment is completed.
So at the moment of invoice creation we don't know which stock is used, because no communication to GTS is done until invoice or goods movement....
Our original solution was to use this BADI on ECC: Determine GTS Relevance for Stock Separation but this BADI only works on the moment of goods issue.. so this is too late for my customer since the invoice is then already created.
Has anyone already met this problem / requirement from customer?
is it possible to receive the stock status (DP or DUP) in ECC before creation invoice via some sort of variable, if so we can link it to MSEG in ECC and create a splitting requirement....

This is no longer an issue, as invoice split is no longer required by Belgian law.

Message Status as "Scheduled" and Queue Status "Queue Stopped".

Hi friends,
My scenario is from Peoplesoft -> XI -> BI
Message has reached BI, but in SXMB_MONI, its showing Message Status as "Scheduled" and Queue Status "Queue Stopped".
How to proceed further ? How can I start that queue ?
Thanks ain advance,
Neena John

Hi Neena,
Go to SXMB_ADM -> Manage Queues -> Register Queues
More on queues
XI : How to Re-Process failed XI Messages Automatically
Run the report RSXMB_REGISTER_QUEUES and register the queues
Run the report RSXMB_RESTART_MESSAGES for restarting ur messages
Refer this:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/20bb9649-e86e-2910-7aa9-88ed4972a5f6
Regards,
Vinod.

Message Status "Scheduled", Queue Status "Queue Stopped"

Hi friends,
My scenario is from Peoplesoft -> XI -> BI
Message has reached BI, but in SXMB_MONI, its showing Message Status as "Scheduled" and Queue Status "Queue Stopped".
How to proceed further ? How can I start that queue ?
Thanks ain advance,
Neena John

Hi Neena,
Go to SXMB_ADM -> Manage Queues -> Register Queues
More on queues
XI : How to Re-Process failed XI Messages Automatically
Run the report RSXMB_REGISTER_QUEUES and register the queues
Run the report RSXMB_RESTART_MESSAGES for restarting ur messages
Refer this:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/20bb9649-e86e-2910-7aa9-88ed4972a5f6
Regards,
Vinod.

Waiting for the service MSExchangeMailboxAssistants to reach status Running

I have to say that the installation of Exchange Server 2013 SP1 has been an emotional experience so far. I have encountered and fixed approximately 20 errors so far and can still not complete the installation. Errors have ranged from adding a registry
key for "Pickup" to toggling IPv6 settings etc. The errors haven't been too bad up to now as they're clearly stated in both the setup log and event viewer. A quick Google search usually gives a few solutions to try and eventually fix
the problem.
My recent error has been difficult to find a solution to as the setup log simply says it cannot start the "MSExchangeMailboxAssistants" service. I have tried to start the service manually but the event log doesn't show any messages relating
to the stopping of the service.
Error:
Service 'MSExchangeMailboxAssistants' failed to reach status 'Running' on this server.
Platform:
Windows Server 2012 R2
Exchange Server 2013 SP1
Things I've tried:
Starting all Exchange services. All are working fine.
Started MSExchangeMailboxAssistants. Stopped immediately without an errors in event log.
Started MSExchangeMailboxAssistants.exe from command prompt. Wouldn't start as it's a service.
Used cmdlet to increase logging level to "high" and "expert" for all 'MSExchangeMailboxAssistants' services. Started service again and nothing logged.
Installed Operations Manager. Nothing logged.
Manually removed Exchange from server several times and reinstalled. Cleaned out AD, registry, files, IIS etc. No change, same error.
Try installing with and without Malware Protection.
Checked IPv6 is enabled on all NICs.
Checked registry settings for quotes around file name. It does contain the quotes so nothing to fix.
Checked Exchange 2013 SP1 is compatible with Windows Server 2012 R2. The original version wasn't but SP1 is.
I'm all out of ideas now and no error message in the logs to google.
Any help would be appreciated.

Thank you for your reply Exchange Shelly, I really appreciate your help.
Unfortunately, "MSExchangeTransport" failing to start was one of the many issues that I encountered during the installation of Exchange 2013 SP1 on Windows 2012 R2. I had already visited the website mentioned above (which was very helpful) and
the registry key is already in place.
I did double check the registry after reading your reply just in case and can confirm it's definitely there.
If I could get an error message when the MSExchangeMailboxAssistants service fails to start, I would have a fighting chance. I've tried increasing the logging level using the cmdlet and the registry but still not seeing anything in the Event Log.

IBot failure: status keeps status "Running"

Dear all,
We installed OBI EE and would like to trigger an iBot. The creation of the iBot is succesful, but in the Job Manager the status of the instances keeps pending on status "Running" and no e-mail is send out. The database tabels also contain the correct jobs and instances.
I allready did an upgrade to version 10.1.3.3 because Oracle told me this was a common issue in my previous version. Still no results for now.
Did anyone faced this issue in the past and do have some usefull tips. I would appreciate it very much.
Best regards,

Welcome to the forum.
When one gets the "Media not present," or similar error messages, it is usually a problem with the blank media, or the multi-drive/burner's inability to sense the media. "SenseCode" errors can indicate the same thing.
Now, my first question, when I see such, would be, "what brand of blank media am I using?" Blank media is not all created equal. I recommend Verbatim, Taiyo-Yuden or Falcon Pro, and recommend AGAINST Memorex, recent TDK, recent Ritek, and all "store brands." Also, though not as important, as it once was, some multi-drives/burners are somewhat sensitive to the type, -R, or +R, however, all newer multi-drives should have no issues - those are more often seen with set-top DVD players. Also, make sure that your blank media is really BLANK. All too often, users have grabbed a disc, that they thought was blank, only to see that it has actually used. Also see this ARTICLE.
If that does not fix things, I would go to Control Panel>System>Hardware>Device Manager>CD/DVD drives (on a PC) and check that there are no error/warning messages next to my multi-drive/burner and that Windows is properly seeing that multi-drive/burner.
If that all checks out, then I go to the multi-drive's mfgr's. Web site and check for firmware updates for my model of multi-drive. If there is a newer firmware, I read the installation instructions, and actually print those out for reference. IMPORTANT: installation instructions are critical to follow EXACTLY, and can change with each firmware update, so read, print out, and follow exactly. Once done, test with high-quality BLANK media.
Good luck, and hope one of those helps,
Hunt

10 Grid Control oem - job hung status running

I installed 10g oem recently.
Created an host job using the same target as oem is installed (simple os command echo test) and the job initiated and is hung in status running with no update.
Any logs I can check to see why it not running?

sometime a job may be show running in GC, there is an example in following thread , have a look this might help you
Re: Can't delete/stop problem execution??

Read per axis status / run-stop don't work at low speed

Similar Messages

Maybe you are looking for