Reader 10.4.1 installation error

The reader 10.4.1 installer detects my WinXP SP3 installation as WinNT and won't install. The currently installed 9.2 version displays pdfs as all black. Any ideas?

lgottlieb45 wrote:
The reader 10.4.1 installer detects my WinXP SP3 installation as WinNT...
I do not understand what this means. What is your %WINDIR% environment variable?
Is there any error message you are getting during the install?
Contents displayed as black indicates an outdated graphics driver.
[topic moved to Adobe Reader forum]

Similar Messages

Adobe Reader 9.3.3 Installer Error 1935! HELP!!!

Hi,
I've a Win 7 Home 64bit system. Brand new install. Trying to install the acrobat reader right from the site, version 9.3.3
Each time it goes through the install and at the end gives the error
Error 1935 - An error occurred during the installation of the assembly component. {98CB24AD-52FB-DB5F-A01F-C8B3B9A1E18E} HRESULT: 0x80070002
I get the option to hit ok, at which point its backsteps and undoes the entire install.
Help please!!

I checked those articles.
Aobe AIR, Adobe DL manager, Adobe Flash Player, Adobe Shockwave player, Avast antivirus, Divx, EVE, Galactic Civilization, Impulse, MS .Net 4, MS Visual C++, Nivida drivers, Sins of a Solar Empire, Starcraft 2, Winamp, Winzip, World of Warcraft, Zone Alarm
That's it .. the only programs in the system at the moment.
I looked at your links but do not see anything that applies. No unknown processes, programs or anything else.
Any further help? please? I'd like to get the adobe reader on the system for my PDFs.

Adobe Reader 8.1.2 Installation Error(error code: 1406)

When i install the Adobe Reader, it appear the error
and said it cannot have right to write the reg-key {5F226421-451D-408D-9A09-0DCD94E25B48}
But i am using the local admin a/c to install, so just want to find some help to look for the reason and solution, thx everyone

these two errors below is what I am receiving when do a program integrity scan: common program locations.
I have done a repair on acrobat reader and I do have the two dll files I even put them in reader folder and still receiving the errors.
missing file:"c:\program file\adobe\reader 8.0\reader\acrord32.exe"
"c:\program files\adobe\reader 8.0\reader\acrord32.exe"cannot access a necessary file,"msvcp80.dll
missing file:"c:\program file\adobe\reader 8.0\reader\acrord32.exe"
"c:\program files\adobe\reader 8.0\reader\acrord32.exe"cannot access a necessary file,"msvcr80.dll

Reader 10.1.3 installation error file in use

The file in use is identified as adobe reader 7.0.....As I understand, it thinks there is something open that uses reader 7.0. But there are no open programs....that I am aware of.

Could you please give more details on your problem? I don't seem to be following you...

Windows Installer error while trying to install Acrobat Reader 8

I am trying to install Adobe Acrobat Reader 8 off the CS3 disc. I already have Acrobat 8 Professional (8.2.3) installed. I just need the Reader. Whenever I try to install the Reader I get the following error, "The Windows Installer Service could not be accessed. This can occur if the Windows Installer is not correctly installed. Contact your support personnal for assistance."
I have tried all the Microsoft fixes for this situation, but I still keep getting the error message. I am using Windows 7 Home Premium (64-bit). Any help would be appreciated.
Thanks.

Nevermind, I figured out what was wrong. I had disabled User Account Control (UAC) when I was tweaking my OS. So I enabled UAC again and was able to install Acrobat Reader 8 without any problems.

Am unable to install CS5 on mac running yosemite. Tried installing JavaFor OSX, it still doesn't work. Error message reads "inconsistency in the installer database"

Am unable to install CS5 on mac running yosemite. Tried installing JavaFor OSX, it still doesn't work. Error message reads "inconsistency in the installer database"

remove your caps database. this shows the location for cs3. make the obvious changes for cs5.
Error "...Installer Database is Corrupt..." when you install Adobe Creative Suite 3 products

Error 1935. ... HRESULT: 0x80073712 Installation error message. Windows7. Adobe Acrobat Reader 11

Cannot figure out install problem or why it is occuring. The Download and installation runs to about 80% and errors out. Icon even appears for program on desktop around 77% complete and I can open it but aborts setup. I have tried to follow the troubleshooting suggestions by going to
Start > All Programs > Accessories > Run (as adiministrator)
Copy and paste the following text in the Open field and then press Enter
fsutil resource setautoreset true C:\
but to no avail.
Also used Firefox browser but same problem occured.
Only virus protection running is MSE and checked that under internet options security trusted sites that scripting is enabled under custom settings.
Need help! I have seen a few other complaints about this issue but doesn't look like any resolution for those who posted.
Adobe Reader installation errorAdobe Reader installation error
Error 1935.An error occurred during the installation of assembly component {B708EB72-AA82-3EB7-8BB0-D845BA35C93D}. HRESULT: 0x80073712. Error 1935.An error occurred during the installation of assembly component {B708EB72-AA82-3EB7-8BB0-D845BA35C93D}. HRESULT: 0x80073712.

I have also seen this error a number of times here in the forum, but I do not know what causes it. It seems to be some kind of conflict with the .NET Framework. Could it be that some update to the .NET Framework is running at the same time? (.NET Framework updates perform assemblies that can run for several hours.)
What I would try if I were to encounter this error:
restart Windows
check with the Task Manager's Processes tab that no batch assemblies are running
try the MSI installer http://ardownload.adobe.com/pub/adobe/reader/win/11.x/11.0.00/en_US/AdbeRdr11000_en_US.msi
then run the 11.0.3 update http://ardownload.adobe.com/pub/adobe/reader/win/11.x/11.0.03/misc/AdbeRdrUpd11003.msp

Cannot export video: AME cannot read from source, Installation Error

Ok, I've seen a lot of people on here talk about this and I have tried using their solutions but nothing has worked.
I cannot export anything from Premier Pro using Media Encoder. When I try, I get an yellow warning sign saying that it cannot read from the source, and when I close out of it I get a message saying that there is an installation error and that I need to make sure it is installed correctly. I have uninstalled and re-installed ALL of my Adobe products about three times this past weekend trying to fix it and nothing has worked. I have tried making sure that there are no blank spaces in my project, I have named it several different things, I have moved it from my external drive to my main drive, to a different external drive, etc.
I am using a Macbook Pro with Snow Leopard, all of my software has been updated, and I am very frustrated.
Help?

Bummer!
Well, it was worth a shot, as externals/network drives have been known to cause similar.
Now, there were issues with Encore and Snow Leopard, but I do not recall all of the details, as I am a PC-guy, and have to admit that first I do not know squat about Macs, and probably do not read Mac threads as closely, as I should. Seems that Apple was working on an update to Snow Leopard, and again from recollection, it seems that that update helped several on the Encore forum. Have you updated Snow Leopard?
Sorry to just sit here guessing, and probably wasting valuable time for you, but until a Mac-user with the "fix" comes along, the PC-community will try to help. Be patient with us though. Our intentions are good ones, but our expertise is lacking - at least in MY case.
Good luck,
Hunt

Adobe Reader 9, Installer error 1635

Hi, I have a problem updating Adobe Reader 9.4.2. to version 9.4.3
Direct after starting the update I receive the installer error:
"1635 This patch package could not be opened. Verify that the patch package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer patch package."
I have tried this MS fix (MicrosoftFixit50123.msi) but it did not help.
http://support.microsoft.com/kb/971187/en
I must say that a few days ago I also had an issue updating Adobe FlashPlayer. It would tell me at boot there was an update available, and after giving it the OK it started downloading, and installing, but although the installing gave no errors at all, both the FlashPlayers for Internet Explorer and Firefox were NOT updated, and only after a lot of these 'fake' updates I noticed it because a following update for Firefox told me my FlashPlayer was out of date while I saw FlashPlayer update that same morning.
Downloading and un-installing/re-installing both FlashPlayers did the trick... But now, a few days later another Adobe product has a problem updating.
I have not yet re-installed the reader, but since I have seen it work for 4 years, and since it MAY be related to Adobe Flash, I would like to see if someone can shine some light on this issue first.
I work with Windows XP Prof completely updated ( except... Adobe Reader).
Thanks.
Edit:
Meanwhile i have tried to uninstall Adobe Reader, but the same error persist.

As far as I can see the problem is solved.
You gave me the tip for the Windows Cleanup Utility, but the support for the program has stopped because some removals did damage to other installs. So I had some second thoughts about it.
But your idea brought me another, to use the Revo Uninstaller.
http://www.revouninstaller.com/
* Made a system restore point
* Downloaded Revo uninstaller Pro 30 day trial, but full version.
* Run Revo ( ! Adobe Reader 9 had 664 registry keys with 902 values...)
* Needed a reboot to remove last files from the Adobe reader 9.
* Roughly checked if other Adobe products still run...
* Downloaded and installed Adobe Reader X ( ? X ? It is version 10.0.1 after updating)
* Did an update of Reader X
* Needed reboot after update.
Ankit_Jain, the link you gave for the Reader 9 download is an US version, but I needed a Dutch (NL) version. That's why I searched for the Reader on the Adobe site, but came on the Reader X page. I thought the X stands for 'the latest version'. But it is not.
So I have a functioning reader back, with one difference: it is not Reader 9, but Reader X . I really don't know what the difference is, but what I do know is that the install takes quite a long time, and, if you don't uncheck the box on the site for the (free) McAfee scanner, it will also install that.
I will try what I have for now, and if I may find other problems around it I will surely report back.
Thanks all for your reactions

Adobe Reader XI (11.0.07) Error 2753. The File 'acrosup64.dll' is not marked for installation.

I am getting Adobe Reader XI (11.0.07) Error 2753. The File 'acrosup64.dll' is not marked for installation when deploying from msi package. .
Need help to resolve the issue

Hi dingusmagii
Can you please share the following info:
-> Which OS and architecture are you on
-> What are the exact steps being followed for installation.
-> Do you have any previous version of Reader already installed on your machine.
Also it would be helpful if you can you share Windows Installer log. Please follow the steps below to create installer log
1. Launch Notepad
2. Copy paste the following text in notepad
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\Installer\]
"Logging"="voicewarmupx"
3. Now press Ctrl+S to save the file.
4. In the "Filename" field type <any_file_name>.reg for e.g. abc.reg
4. In the "Save as type" dropdown, select "All Files"
5. Click Save button to save the file at desired location
6. Go to the location where you saved the file and double click on it.
7. Follow the prompts to create the registry key.
After the registry key is added successfully, please re run the 11.0.07 patch installer. Once you get the error message click ok and then click on finish to close the installer dialog.
Now go to C:\Users\{username}\AppData\Local\Temp and look for file with name similar to MSIxxxxx.log.
Please upload the dump (compress the dump using WinZip or likewise) and share the link here.
For help see link How to share a document
regards,
Rohit

Error 1901. Error attempting to read from the source installation database

OS: Windows 7 Enterprise 64-bit
Browsers: IE 9 and Firefox 10
Flash Version 11.7.700.169
I'm logged in as Administrator. I'm trying to install using this:
start "" /wait msiexec /i install_flash_player_11_active_x.msi /qb
and
start "" /wait msiexec /i install_flash_player_11_plugin.msi /qb
Both commands result in:
Error 1901. Error attempting to read from the source installation database: C:\Windows\Installer\3c0cc1.msi
(the file name seems to be random)
echo %errorlevel% returns 1603.
Help.

Not sure how much I can help you with this. Error 1603 usually indicates that the installer cannot proceed because something is in use; search this page for 1603: http://msdn.microsoft.com/en-us/library/windows/desktop/aa372835%28v=vs.85%29.aspx

Installation error for adobe reader

Hello, will some kind soul tell me, how to install adobe reader on safari?
I'm browsing a webpage which requires PDF reader and it says missing plug-in. When I download the dmg file from Adobe and started to install, it said 'installation error'.
First-time mac user (macbook pro 2011) - not exactly very happy, it has crashed several times by now. :-||||||

Are you trying to use http://www.schubert-it.com/pluginpdf/

Please assist with installation (Adobe Reader); currently receiving installation error messages

Please assist with Adobe Reader installation. Currently receiving installation error messages 1) #1311 "source file not found" and 2) #13050 "raise without handler".

Last idea I have: try using the MSI installer http://ardownload.adobe.com/pub/adobe/reader/win/11.x/11.0.00/en_US/AdbeRdr11000_en_US.msi

Ora-19870 error reading backup piece during installation

Hi,
I am trying to install oracle10g database on windows.
i am installing database software and database together and i keep getting this error half way throu installation.
"ora-19870 error reading backup piece during installation"
how can i solve this.
Can someone help me please.
Thanks,
Philip.

Hi,
sorry man. i still have that problem.
i could not find any solutions so far.
if i find any i will let you know.
but for now i have decided to install in another PC.
Philip.

Mac: Adobe Reader Installation error

I get the following error when trying to install Adobe Reader on my Mac (running OS X 10.8.4):
dyld: DYLD_environment variables being ignored because main executable
(/System/Library/PrivateFrameworks/Install.framework/Resources/runner) is setuid or setgid installer:
Package name is Adobe Reader XI (11.0.03) Installer: Installing at base path / installer: The install failed (The
Installer encountered an error that caused the installation to fail. Contact the software manufacturer for
assistance.)
Evidently the install process is running afoul of some security issue but I don't know how to work around the problem.
Would appreciate any pointers. Thanks.

[email protected] wrote:
Problem solved.
I repaired disk permissions using Disk Utility. After that Acrobat Reader installed just fine.
That was what I was going to suggest.
"setuid or setgid installer" errors are ALWAYS permissions related.

Reader 10.4.1 installation error

Similar Messages

Maybe you are looking for