Receiving and Transmitting RTP (to 3rd party) simultaneously
Hi All,
I am trying to do a video conference, using those example files from JMF Solutions. I am able to send and receive live video from one node to another. Now i want to establish video conference between A to C and i want to store the entire session in B. Here actually i want to transmitt A's video to B, store the session in B and then from B i want to send it to C. Please give me some idea to do this.
Thanks in Advance,
Karthikeyan R
Hello Eric,
We are currently in the process of implementing ADP and do master data transfer from HR to ADP.
Would you be willing to have a quick phone call with me interms of lessons learned and advice from you on this.
Please let me know.
Thanks,
Girish
Similar Messages
-
Clone DataSource for simultaneously receiving and transmitting?
Hi!
I wrote an application that receives a video stream and transmits it to a client. The application works fine.
But if I change it to a servlet I get a StreamCorruptedException ("type code out of range, is 0")
The API sais: StreamCorruptedException is thrown when control information that was read from an object stream violates internal consistency checks.
Why is this exception only thrown in the servlet?
Might this be because I use this datasource for receiving and transmitting data?
Do I have to use a cloned datasource?
Help please...
DeikeHi
can u please send me ur code. it is very urgent requirement
in our application. thanks in adavance
sent it to this mail id : [email protected]
regards
Narendra -
Is there an add-on to clearly show that data is being received and transmitted from my PC plus the rate of transfer ?
I take it you are referring to a alternative to Net Usage Extension which is still being maintained and is current for Firefox 3.6.*
See https://support.mozilla.com/en-US/questions/750519
mozillaZine/Sumo mod. -
Hello everyone!
I'm a newbie.
The problem is the column of [DiskRead and Write]&[Network Received and Transmitted] has nodata.The others are OK(CPU,Memory etc.). I already set the base rate for [DiskRead and Write]&[Network Received and Transmitted] and I do some operations like copy files from one to another VM in the VM. But it still 0.00 in the report .
Can anybody tell me why? Is anything wrong in my vCenter Database?
Thank you very much!Hello,
Thanks for sending the data.
The query that we asked you to run gives the values of network transmit-receive and disk read-write that CBM data collector has collected from VC.
A closer look at the output of the query shows that CBM has been able to collect data for network received and transmit (resource_id=6) from VC. The attached report contains costs for network received and transmit.
But there is no data for disk read and write (resource_id=2). So the report shows 0 costs for disk read and write.
Now we need to know the cause of absence of this data from CBM DB. As a first step, we will like to see if VC DB contains disk read-write related data. Can you please attach the output of following steps?
1) Please run following query on CBM DB
select entity_moid from cb_vc_entity where vc_entity_id=(select vc_entity_id from cb_vc_entity_mapping where cb_entity_id=(select entity_id from cb_entity where entity_name='work_GJL'))
This will give 'moid'. This moid should be used in the next query.
2) Please run following queries on VC DB.
We need outputs from 4 tables namely:
i) VPXV_HIST_STAT_YEARLY
ii) VPXV_HIST_STAT_MONTHLY
iii) VPXV_HIST_STAT_WEEKLY
iv) VPXV_HIST_STAT_DAILY
Substitute <table name> in the following query with each one of these and store the outputs of different queries independently and attach here.
select SAMPLE_TIME, SAMPLE_INTERVAL, STAT_VALUE from <table name> where ENTITY LIKE 'moid from above query' AND STAT_NAME = 'usage' and STAT_GROUP = 'disk' and STAT_ROLLUP_TYPE = 'average' order by SAMPLE_TIME
Thanks,
Mugdha -
Droid X receives and sends calls but neither party can hear
My Droid X would receive and send calls but nether party can hear each other, however I can send dial tones on the line. The receiving side can not send tones. Resetting to factory is dramatic. What can I do to fix this. Thanks!
Sounds like the software could be corrupt, how is hard reset dramatic?
It is either hardware or software, you won't know until you eliminate one. -
One RTPManager for both, receiving and transmitting
Can I use one RTPManager for both, receiving and transmitting media data?
I would create send stream and imlement appropriate update+ methods.
Will it work?
Regards!Ummm, you don't have to implement any methods if you don't want. The default RTPManager does it all for you. I think you may want to override some trigger functions, but...
[http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/AVTransmit.html]
[http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/AVReceive.html] -
Receiving net payroll data from 3rd party (ADP)
We are currently outsourcing 3rd party payroll to ADP. Master Data and Time Wage Type IDOCs are transmitted. After payroll processing, G/L data is downloaded through ADP Infolink G/L interface website as a .csv file.
We want to receive G/L data back from ADP in standard SAP IDOC format. I have posed this question to ADP support with no luck.
Has anyone imported G/L net payroll data back from ADP as an IDOC? Is this considered a different product than web-based Infolink G/L?
thanks,
EricHello Eric,
We are currently in the process of implementing ADP and do master data transfer from HR to ADP.
Would you be willing to have a quick phone call with me interms of lessons learned and advice from you on this.
Please let me know.
Thanks,
Girish -
ICal server and external invitations via 3rd party mail server
Hi everyone,
OS 10.6.5 Server:
Services running
AFP
DNS
iCal
Open Directory
Push Notification
We are currently testing iCal server and have configured it to send out invites via our mail server (which is running on a different server) by creating the com.apple.calendarserver user on our mail server.
Email notifications are then configured under the Enable Email Invitations tab in the iCal service of Server Admin as follows:
IMAP
Email address: [email protected]
Incoming server: mail.mytest.com
Port: 143 (not using SSL)
Username: com.apple.calendarserver
Password: secret
SMTP: mail.mytest.com
Port: 25 (not using SSL)
Server requires authentication
Username: com.apple.calendarserver
Password: secret
My test OD users are able to send out invites both internally to other iCal users and externally via email.
So for example, I invite someone to a meeting and enter their gmail address ([email protected]), the invitation goes out correctly - when I log into gmail I see the invitation.
When responding to the invitation (clicking Yes), the mail server receives the response from gmail and the iCal server collects the message via IMAP.
However, the iCal server doesn't seem to parse the received email correctly as I get the following error in the iCal error logs:
[twistedcaldav.extensions#info] Cannot authenticate proxy user 'com.apple.calendarserver' without X-Authorize-As header
2011-03-03 17:44:03+1100 [-] [mailgateway] 2011-03-03 17:44:03+1100 [AuthorizedHTTPGetter,client] [twistedcaldav.mail#error] Mail gateway failed to inject message <[email protected]> (Reason: 400 Bad Request)
2011-03-03 17:44:03+1100 [-] [mailgateway] 2011-03-03 17:44:03+1100 [AuthorizedHTTPGetter,client] [twistedcaldav.mail#debug] Failed calendar body: BEGIN:VCALENDAR
2011-03-03 17:44:03+1100 [-] [mailgateway] VERSION:2.0
2011-03-03 17:44:03+1100 [-] [mailgateway] CALSCALE:GREGORIAN
2011-03-03 17:44:03+1100 [-] [mailgateway] METHOD:REPLY
2011-03-03 17:44:03+1100 [-] [mailgateway] PRODID:-//Google Inc//Google Calendar 70.9054//EN
2011-03-03 17:44:03+1100 [-] [mailgateway] BEGIN:VEVENT
2011-03-03 17:44:03+1100 [-] [mailgateway] UID:43121576-1183-40C8-82D8-A052754AD1CE
2011-03-03 17:44:03+1100 [-] [mailgateway] DTSTART:20110406T080000Z
2011-03-03 17:44:03+1100 [-] [mailgateway] DTEND:20110406T090000Z
2011-03-03 17:44:03+1100 [-] [mailgateway] ATTENDEE;[email protected];CUTYPE=INDIVIDUAL;PARTSTAT=DECLINED;RO
2011-03-03 17:44:03+1100 [-] [mailgateway] LE=REQ-PARTICIPANT;X-NUM-GUESTS=0:mailto:[email protected]
2011-03-03 17:44:03+1100 [-] [mailgateway] CREATED:20110303T062518Z
2011-03-03 17:44:03+1100 [-] [mailgateway] DESCRIPTION:
2011-03-03 17:44:03+1100 [-] [mailgateway] DTSTAMP:20110303T064335Z
2011-03-03 17:44:03+1100 [-] [mailgateway] LAST-MODIFIED:20110303T064335Z
2011-03-03 17:44:03+1100 [-] [mailgateway] LOCATION:
2011-03-03 17:44:03+1100 [-] [mailgateway] ORGANIZER;CN=com.apple.calendarserver+07b1c044-9d98-4cdc-afe3-48139218ee35
2011-03-03 17:44:03+1100 [-] [mailgateway] @mytest.com:urn:uuid:B72794FB-3242-48D7-AC22-A584D279B9F9
2011-03-03 17:44:03+1100 [-] [mailgateway] SEQUENCE:3
2011-03-03 17:44:03+1100 [-] [mailgateway] STATUS:CONFIRMED
2011-03-03 17:44:03+1100 [-] [mailgateway] SUMMARY:one more test
2011-03-03 17:44:03+1100 [-] [mailgateway] TRANSP:OPAQUE
2011-03-03 17:44:03+1100 [-] [mailgateway] END:VEVENT
2011-03-03 17:44:03+1100 [-] [mailgateway] END:VCALENDAR
2011-03-03 17:44:03+1100 [-] [mailgateway]
I have set a rule on our mail server to bypass any spam filtering for all messages sent to the [email protected] address, but this doesn't seem to make any difference.
Does anyone else have this working ? Any ideas ?
Many thanks
Message was edited by: gen_bunty
nullThe issue is not "user authorization". The issue is that the 3rd-party service does not accept all incoming relay requests unless there is authentication with a registered account (which we have). This protects the 3rd-party service from becoming the relaying host for the universe's spoofed and anonymous spam. My deduction is that there is no mechanism in UTL_MAIL to designate not only the 3rd-party ip-address:port (by-passing the local sendmail server) but also providing the username:password for the account there for authentication.
Plan A: I have attempted to follow directions for client-side SMTP Authentication for Relaying on the sendmail.org site.
I have not been successful in completing a simple mailx interactive test, much less completing a UTL_MAIL configuration.
I am scouring the user universe for someone who has put all the pieces together successfully and can advise. . . .
Edited by: StevenInTallyFl on Mar 26, 2010 3:50 PM
to clarify that I cannot get from UTL_MAIL to 3rd-party IP directly -
IDOC as a receiver adapter in XI to 3rd party scenario
Hi All,
I have an requirement to connect sap xi and 3rd party. the scenario as given below:
sap ecc 6.0 --> sap xi --> 3rd party
Here ecc is sending an idoc to the 3rd party. The 3rd party is SAP certified and intelligent enough to receive and send idocs. Here I'm using a idoc adapter as a receiver adapter. In the receiver adapter I have to give a rfc destination and a port name.
My question is how to create a rfc destination for the 3rd party. and which port name we'll use in this case. Is the port name will be the 3rd party port name is yes then how I can create a port in the 3rd party system.
Please help.
Regards,
SantoshA communication channel with a receiver IDoc adapter can be created automatically for business systems that are defined in the System Landscape Directory. refer this link
[http://help.sap.com/saphelp_nw04/helpdata/en/42/d1a4d665c5574fa6e19784358ec948/frameset.htm]
You need to configure the receiver IDoc adapter to convert Integration Server contents from IDoc-XML to native IDoc format and to forward the IDocs to an SAP system .
you create a port and the rfc destination pointing to receiver in PI system
use tcode sm59 for creating rfc destination and IDX1 to create port and map it to rfc destination. -
Assign manual cost and profit center for 3rd party purchase order
When we have a 3rd party purchase order we need to assign OUR cost and profit center to that document. Here is the scenario:
We buy a product from a vendor for $10 and then re-sell the product to a customer for $100. Instead of posting this information to either cost or profit center of the vendor and customer, we need to assign the $10 to our company cost center and the $90 to our company's profit center. We are basically acting as a middle man for selling a product.
I am fairly a newbie, so please provide detailed answers if possible. We create the sales order in VA01 and create the purchase order in ME22N.HI Kapil,
For any accounting entry you need to define a General Ledger Account where the details (Amount) of the transaction will be stored.
Just by maintaining cost centre will not help in completing any transaction involving accounts. So you need to maintain G/L account in the controlling area of your company code.
You can use T Code FS00 to create new G/L account in the chart of accounts.
In the edit cost element Tab you can give the cost center that you want.
I hope this helps.
thanks
rahul goel -
HRFORMS and Downloading for a 3rd Party Print Service.
Hi there
I was wondering if someone could help.
We are currently testing our printing of the NEW HRFORM for GB. This has been created in "FORM BUILDER" format
We print the forms in the back ground and this creates a spool, but the spool contains Part List of PDF Spool.
We use a 3rd Party Print provider and would like to Secure FTP the actual PDF File to them, but cannot download this file.
Anyone got any ideas on how this PDF containing the Payslips be downloaded.
GaryAnyone able to assist on this at all?
-
Relationship between invoice and billing document in 3rd party
Hi Experts,
Is there any relationship between vendor sending invoice to us and we send billing document to customer in third party scenario ? If yes, kindly let me know the relation please.
Regards,
PrasathHi Adwait,
Thanks for your reply.If the 3rd party vendor sends invoice for quantity 50 to us and the3rd party vendor has delivered the quantity 30 to customer. Which one is to be done first? invoice from vendor or billing document to customer? How do i check how much the 3rd party vendor has delivered to customer ?
Regards,
Prasath -
Synchroniz​ing PC and Centro to install 3rd party software
I stored software on my PC at folder Cokumente und Einstellungen/AS/Eigene Dateien/Palm OS Desktop/Holger/Install but when I activate the HotSync I get no installation on my Centro. Can anyone help?
Post relates to: Centro (Unlocked GSM)I am trying to install "WEATHERBUG" Weatherbug was allowed to run just fine on earlier versions of MOUNTAIN LION. 10.4 and later won't allow this 3rd party app to download.
WeatherBug Alert for Mac helps you plan your day with confidence by putting severe weather alerts and your live temperature on your desktop.
Features
The most reliable weather information found anywhere.
Severe weather alerts to help protect you and your family.
One click access to radar, forecasts and more on WeatherBug.com
Installation Intructions
Download zip file.
Copy file to Applications folder.
Run the app.
System Requirements
Mac OS X version 10.4 or later
Internet connection
Support
For support or to provide feedback on WeatherBug Alert for Mac, please visit the WeatherBug Alert Forum
Click here for the OS X 10.3.9 Compatible Version
FREE DOWNLOAD
WeatherBug Alert for Mac helps you plan your day with confidence by putting severe weather alerts and your live temperature on your desktop.
Features
The most reliable weather information found anywhere.
Severe weather alerts to help protect you and your family.
One click access to radar, forecasts and more on WeatherBug.com
Installation Intructions
Download zip file.
Copy file to Applications folder.
Run the app.
System Requirements
Mac OS X version 10.4 or later
Internet connection
Support
For support or to provide feedback on WeatherBug Alert for Mac, please visit the WeatherBug Alert Forum
Click here for the OS X 10.3.9 Compatible Version
FREE DOWNLOAD
When I click install WEATHERBUG from the FINDER it get this message.
"WeatherBug Alert" can't be opened because it is from an unidentified developer.
Your security preferances allow installation of only apps from the Mac App Store and identified developers.
Safari downloaded this file today at 7:33 AM from wdownload.weatherbug.com. -
Hi,
i have a NI-CAN PXI 8464 card series 2 (well, at least I hope it's series 2 :-) ) and want to use self_reception, for that I can receive incomming messages and my one sent one. Is there a way how I can tell if a received message is a incomming one, or a transmitted one.
I'm using the Frame API with CVI and the latest NI-CAN Driver
Thanks in Advance
OlliThere is no special treatment of
these frames, they are seen on the CAN bus by the receive portion of
the transceiver just as any other frame transmitted on the CAN bus. So unfortunately you cannot differ them from frames received normaly over the CAN bus. The only way would be to create a logic which stores transmitted frames and are compared agains frame received in the read queue.
http://digital.ni.com/public.nsf/allkb/14429577623AEB5286257005004A9B02?OpenDocument -
Re: Receiving and transmitting audio/video streams
Btw, i just want to ask, how can you transfer from one computer to another computer? using what? pls tell me. thanks a lot
hey every body i got a bit similar problem regarding ports,
thats is i am unable to send and receive audio at the same time using RTPManager is it JMF restriction i.e transmission is half duplex or what is it possible cause if u receive i cant send and viceversa :(
any help will be higly appreciated.
Thanks
Maybe you are looking for
-
Downloaded IO6 on my iPhone 4s. Now I can't capture a photo off Facebook to the camera roll. When I try, I get a "Save Photo" tab rather than a "Save Image" button, The photo does not save to camera roll. For email images and Safari images, "save
-
How to Check WET610N is working?
I called and spoke to a Cisco representative and they told me all I have to do is get a WET610N and WAP610N in order to get my wireless situation set up. We currently have the E3000N (which everyone said was the strongest router, but doesn't even go
-
Defining substitutes in a multi SAP component system landscape
Hi All, I need some help trying to understand and figure out how to best proceed with a recommendation/solution for defining workflow substitutes in a new SAP installation that includes the following components: Netweaver 2004S, EP6, SRM5 and ERP 20
-
Maintaining Photoshop aspect ratios in After Effects
Hi there, I'm new to adobe programs... I'm having a problem when i try to import a 720 x 540 photoshop image into After Effect at the same ratio. After establishing the same settings, my image in AE is slightly cut off at the sides (along the width)
-
When will Lightroom have a profile for the Parrot Bebop Drone for lens correction?
Just wondering if and when Lightroom will add a lens correction profile for the Parrot Bebop Drone.