Reference Object to Refresh Work Order Field Data

Dear Gurus,
In IW21/IW22 the reference object will populate the Responsibilities section of the Notification tab, and fields on the Location Data tab.  When the reference object is changed, those same fields will update or refresh.  The reference object will also populate field data in a work order if the work order is created from the notification, however, work order fields will not refresh if the reference object on the notification is changed.  Nor will work order fields change if the reference object is changed directly within the work order.
Can anyone explain why fields will refresh in IW21/IW22 when the reference object is changed, but similar fields in the work order will not refresh when the reference object is changed in IW31/IW32?

Hi Lisa,
When you execute IW31/IW32 transaction, in back ground standard SAP programs are called to perform order related task.
When transaction IW21 / IW22 is executed and order is created or changed at that point also standard SAP programs are called to perform order related task.
But program called by IW31/IW32 are different then that will called with IW21/IW22 and thus refresh dont happen if u change reference object in notification once after order is created.
You need to manually change in work order.

Similar Messages

  • BADI for Updating work order component data

    Hi,
    I need to update the field special stock indicator for the work order component data when it is saved. I am using the BADI WORKORDER_UPDATE for the same, but when I implemented the ZWORKORDER_UPDATE_IM using the standard defenition  WORKORDER_UPDATE , the code does not allow me to change the it_component internal table belonging to the BEFORE_UPDATE method. Could you please help me in this.
    Basically if we are implementing a standard defenition how to change the parameters of the methods in it.
    Regards,
    Prabaharan.G

    Hi ,
    It is giving the below dump. The parameter is importing parameter and it does not allow to change even using field symbol. Is there any other way. Is there an user exit which will be called when pressing enter button in component screen. The exit EXIT_SAPLCOBT_001 did not work for this.
    Error analysis                                                                     
        The program tried to assign a new value to the field "<F_FS1>" even though     
        it is protected against changes.                                                                               
    The following objects are protected:                                           
        - Character or numeric literals                                                
        - Constants (CONSTANTS)                                                        
        - Parameters of the category IMPORTING REFERENCE for functions                 
          and methods                                                                  
        - Untyped field symbols to which a field has not yet been assigned             
          using ASSIGN                                                                 
        - TABLES parameters if the corresponding actual parameter is protected         
          against changes                                                              
        - USING reference parameters and CHANGING parameters for FORMs if              
          the actual parameter for this is protected against changes    
    Regards,
    Prabaharan.G

  • PM Work Order release date.

    Hi guys,
    Where to find the work order release date? In the Header Data, there is no field mentioning about release date. There are only Basic Start/End Date and Malfunction Start/End date.
    Thank You

    Hi Rio,
    Generally that basic start date is date which order is going to be released,
    In Application tool bar There is a "release" button whenever that button is clicked that order is released with the date which is basic start date there is no special space for release order date.

  • Reference object in Notification and Order

    Hi ,
    I have a requirement to capture following in the reference Object for notification and  Order
    1. Functional Location
    2. Equipment
    3. Material
    4. Serial Number
    Configuration setting for overview of notification type doesn't have  the option to capture all the above fields.
    I am able to get all fields except Functional Location...
    Please guide me
    Regards
    Anil Kumar

    Anil,
    I have just been looking at this same requirement.
    Unfortunately you can only use the standard options for reference objects which does not allow for your requirement.
    There are no user-exits/BADIs either, you would need to build a new screen and screen-logic which is a system modification.
    The best I could do within the standard system is to include these fields on the Enhancement tab (user-exit IWO10018) or build a bespoke front-end via ABAP or HTML. GUIXT is another option.
    PeteA

  • Cost aganist Work orders by Date

    Hi Friends,
    Is there any standard reports available for Cost aganist Work orders by date or else please let me know any tables (apart from COEP & PMCO) are there to get the data Work orders cost per Date wise.
    Thanks & Regards,
    Srinika

    KOTAGIRI SRINIKA
    In COVP, pass the object number (OBJNR) which you will get from table AUFK for orders.
    Based on this you will get the relevant cost elements with respect to document date (BLDAT) as well as the posting date (BUDAT) of the cost booked on orders.
    I think by this you can get the cost based on dates for your orders.
    Hope this helps.
    Chin2.

  • Work Order field define and display in Operation TAB

    I have a question about the user field define in work order's operation:
    I define the user field in the standard IMG for operation's Enhancemen use. but the field can only display in the operation's details' Enhancemen Screen. 
    What I want is the User field can display in the Operation list screen.
    BTW:what does the Equipment numnber in Operation TAB 's   meaning
    thanks  a lot

    Duplicated [here|Work Order field define and display in Operation TAB;

  • Service po created with reference to preq , in po some fields data was miss

    i was created preq with item type D and account assignment category = network  , uploading point data and recipient data.
    after that i was created po with reference to that preq , in that  po uploading field , recipient field data was missing , how to get that data in service po

    Hi,
    In service documents and blanket PO's the "goods recipient" can not       
    be used. Please read the information from the note 118008:
    The system does not display the goods recipient and unloading point        
    fields in the account assignment block for a service line even though      
    they are set as input fields in Customizing.                               
    You cannot display fields 'Unloading Point' and/or 'Goods Recipient' in       
    the R/3 system. The reason for this is that every account assignment          
    object for each service specification can have several unloading points       
    and/or goods recipients.                                                      
    In particular, only one cumulation for each account assignment object is      
    possible and useful at purchase order item level.                             
    As of Release 4.0, user fields are available in external services     
    management.                                                           
    You can name these user fields, for example, 'Unloading Point' and    
    'Goods Recipient'.                                                    
    A user field belongs to the service line and is purely informative.   
    Regards,
    Edit

  • PM work order "Reqmt Date" in General tab for the items in component tab

    Hello experts,
    Currently in our PM work order when the materials are added to the component tab to create purchase requistion the requirement date is defaulting to today. So every time the buyers have to update the purchase requisiton they need to change the requirement date field.
    We are planning to open the field ( so the requirement date will not default) .
    What can be the negative consequences of that?
    Would that be a issue for our MRP run?
    Thanks,
    Raneetha

    If you are putting Current date (coming as default), PR is getting the same date. Are you creating this PR through MRP??
    Even if you put any actual requirement date, based on MRP period, system will create the PR with appropriate date which has been mentioned in PM order.
    There is no impact of changing this date.

  • DMS: Object Links for Work Order

    Hello All,
    I would like to attach and checkin originals to a work order thru CV01N/CV02N transaction. But, there is no specific tab for work oder. How do I acheive this?
    what configuaration and development has to be done?
    Any kind of help is highly appreciated.
    Thanks,
    Chandra

    Hi,
    If you need only a tab to be seen in the CV01N/CV02N Tcodes, then there is a config settings,
    Document Mangement--> Control Data->Define Document Types (under that select your document type to which this attachment is required) > Define object links> select the production order (PORDER---Object & Screen # 0251)
    then you can see the production order tab in the DIR,
    OR
    As per my understanding of your requirement is:
    When you attach a Original in DIR then it should be visible in the Production order also.
    To achieve this you need to build a relation b/w Material Master & DIR (particular document type), so when a order is created then DIR with original will also get attached automatically so that you view, or through EWB also it can viewed & edited.
    Hope i have understand correctly.
    Regards
    Rehman

  • Work Order Field Selection after Release

    Hello,
    Can anybody help me in configuring Field Selection.
    We are creating Work Order or Service PO.
    We are entering Services in Short Discription Bcoz Service master is not used.
    We want to make this field in Display after completely release.
    We are using Release Indicator 3 i.e Changable. for final release.
    Is there any way that we can change Field selection?

    Hi,
    I am afraid that this setting will prevent change in any field from taking place after full release.  It is not applicable to only service line item's short text description.
    Cheers,
    HT

  • Automating the services for object for a work order

    Hi All,
    Can anyone post an ABAP code using which we can automate the process of creating a note for a Work order at the time of saving the work order. I need to create a note with the work order at the time of saving it. This note needs to be attached automatically. Can anyone help me with the code to do this?

    Uhm... If you want us to do your job, how much are you willing to pay?
    How is the note "attached"? If it's an attachment using GOS then the code has already been posted on SDN - look it up. You'll need to add it to the work order creation (I'm guessing there should be some kind of BAPI or FM).

  • Issue of invoice with reference to service frame work order

    Hi Gurus,
    i am creating service framework purchase order for a service material. in item detail of service framework po  in condition tab i maintain vat %  condition. then i create service entry sheet with reference to that po and post the entry. when i go to maintain invoice for that material  with ref to po the system shows two line items first line item shows amount and quantity to be invoice and second line item shows no amount or quantity but shows po number and po text  which mentions vat% .
    please tell me what customizing mistake has taken place
    regards

    Hi Suresh
    go to OLMSRV > taxes at individual service level
    then check box against country code.
    Best Regards
    Nishant Shende

  • Reference Object Screen For Vehicle in Maintenance Order

    SAP Gurus,
    How could I display the reference object screen for vehicle specific data (O150) in my Maintenance Order. I have been able to display it in Maintenance Notification but how could the fields plate number etc defined in reference object screen for Fleet objects be displayed in Order.
    Regards,
    Muhammad Usman Kahoot

    Muhammad Usman Kahoot,
      When you create the Order from the notification, there shouldn't be a problem with the reference object screen, you should be able to see the Fleet object reference field, even if the screen reference object type for the order type is set to blank in config.
    If you are creating a order directly using transaction IW31,Make sure to assign the Equipment only reference object screen (0150) to the order type using transaction OIOA.This will bring in the fleet reference object field defined as well.
    Regards
    Narasimhan

  • Do not allow change of Reference Object after Order release

    Dear All,
    The requirement is that we should lock(not able to change) the Reference Object after the Maintenance Order is released. Can we acheive this in standard way or do we need to go for development.
    If going for development what should be the basic logic.
    Regards,
    MLN Prasad

    Prasad,
      You are accomplishing the same utilizing the built in enhancement framework([Implicit enhancements|http://help.sap.com/saphelp_nw70/helpdata/en/70/63da4023a28631e10000000a1550b0/frameset.htm]), WITHOUT making a MODIFICATION to the system. This technology / functionality is available from ECC 6.0 . You would need to be very careful in using the implicit enhancement functionality so that you don't break the flow. Your requirement seems to be a simple one which could be accomplished by tweaking the screen attributes of the field under certain conditions, for this specific screen in the program. You may also have to make the Priority field a display only, so that it doesn't trigger a change through it via the user exit or through standard.
    Regards
    Narasimhan

  • How to avoid automatic data change in service notification from work order

    Hi,
    when I change work order address data the address data from the service notification connected to the order is changed too, how can I avoid this change? Is there anything on customizing to control whichs fields are updated automatically.
    Thanks,
    Juan.

    Hi,
    You can trying using Books of Business.
    Create a book and add that particular user to that book and at the time of task creation, through a workflow you can assign it to the corresponding book.
    This might resolve the access issue you are facing.
    hope it helps,
    Mayank

Maybe you are looking for

  • YEAR PLANNER!

    After months of searching for a simple year planner (The guys in Aberdeen Apple Store wouldn't believe there wasn't such a thing - until they tried to find it!) I've just discovered that iCal in Lion does include a year view. So I've just upgraded my

  • Pros help needed with post data code

    i needed to change the code below to post the userAnswer from radio button group,  to an ASPX page so i can read the data in and post it to a database. can anyone help. thanks btnCheck.addEventListener(MouseEvent.CLICK, checkAnswer); function checkAn

  • Comparing SQL Data Results with CSV file contents

    I have the following scenario that I need to resolve and I'm unsure of how to approach it. Let me explain what I am needing and what I have currently done. I've created an application that automatically marks assessments that delegates complete by co

  • 2-cam interview on timeline needs to be clipped up. How?

    Newbie to X, used FCP5.2 last. Can someone give me an analogy about the time line wiout tracks? I am lost trying to understand it. I used to think of the tracks in FCP 5.2 etc as "pasteboard at the bottom and acetates on tracks above it" like Photosh

  • Export from User exit.

    hi Guru's I am using this is a user exit: DATA: lv_diff TYPE n. lv_diff = TRUNC( wmara-mhdhb - lv_mhdhb ).   EXPORT lv_diff TO MEMORY ID 'ZXXXXX'. and importing in a custom program: DATA: lv_diff TYPE n. IMPORT lv_diff FROM MEMORY ID 'ZXXXXX'. Th sy-