Reg: Converting Standard Payslip (PC00_M99_CEDT) to PDF and send via email
Dear Experts,
Please provide me a solution to convert the standard Pay slip (PC00_M99_CEDT) Remuneration statement to PDF and send it via email to individual employee by fetching the email ids through the info types.
I checked the forum, few answers our complete but they have not given the solution.
Thanks in advance
Abdur
Moderator message: moved to requirements forum (points-free!)
Edited by: Thomas Zloch on Feb 7, 2011 11:53 AM
Moderator message: moved back to ABAP General.
Edited by: Thomas Zloch on Feb 9, 2011 1:03 PM
Dear Experts,
As suggested, I have written the below code.
REPORT ztest_period.
DATA : td_listobject LIKE abaplist OCCURS 0 WITH HEADER LINE.
DATA: txtlines(1024) TYPE c OCCURS 0 WITH HEADER LINE.
DATA: list_tab TYPE TABLE OF abaplist,
lt_objbin TYPE TABLE OF solisti1 WITH HEADER LINE.
SUBMIT rpcedtx0 VIA SELECTION-SCREEN EXPORTING LIST TO MEMORY AND RETURN.
CLEAR td_listobject. REFRESH td_listobject.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = td_listobject
EXCEPTIONS
not_found = 1
OTHERS = 2.
*IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
*ENDIF.
CHECK sy-subrc = 0.
CALL FUNCTION 'TABLE_COMPRESS'
TABLES
in = td_listobject
out = lt_objbin
EXCEPTIONS
compress_error = 1
OTHERS = 2.
&code&
I'm getting the raw data from FM 'LIST_FROM_MEMORY' Please tell me how should i convert it to normal data.
Once i get the data, I need to send an email for individual personnel number for the respective month.
Please advice me the next step.
Thanks and Regards,
Abdur Rafique
Edited by: abdur rafique on Feb 21, 2011 11:39 AM
Similar Messages
-
Script to merge data from Numbers into Pages document, export as PDF and send via email
Hi,
I am wondering if it would be possible to achieve the following with an applescript:
1. Merge Names from Numbers into a multi-page Pages document.
2. Export each page of the resulting document as a PDF
3. Attach each of these PDFs to an email with specific text in the body of the email, setting the subject, the 'from' email address, as well as the 'to' email address from a field in the Numbers document.
4. Optionally send the emails automatically.
I would be glad to know if this is possible before I embark on trying to write such a script, and for any advice/script that would help me on my way.
Thanks,
NickThanks Bernard. Sorry if my original post wasn't that clear. I think you've pretty much got it in your paragraph starting "So, I think you're asking for", but will explain more in the hope that it will be clearer:
I have a Numbers table with 2 columns: Name and Email. I have say 50 people in this table and I need to email each person a version of a one page Pages document which would be identical except for their name.
The Name field is the only field that needs to be merged into the Pages document (one time only).
Once the merging has taken place the versions of the one page Pages document need to be exported as a PDF and attached to emails, one email from each person in the table in the Numbers document, with each email going to the email address corresponding to the name in the Numbers document.
The text in the email would be identical except for the name again. The text for the email body, subject as well as the 'from' field would be contained in the script (i.e. generated by the script).
It would also be good to have the option of sending the emails automatically or manually, so that I could check that the emails that are generated are correct before sending.
I hope that's clearer!
Nick -
Encrypt file and send via email
Hi,
I have a file which I wish to encrypt and send via email. I know how to send by email but wish to send the file (csv), protected. I have read a few boards that say you could zip the file and add password protection. But sadly none of the forums show how to do this, does anyone have any code examples of what packages I would need?
Any help would be greatly appreciated.See the JavaMail Third Party Products list at http://java.sun.com/products/javamail/Third_Party.html.
Bouncy Castle is a popular package to handle secure email. -
Convertion of Smart form to pdf and sending mail to vendor for Invoice
Hi All...
now I am getting the output form of Invoice by the T-code VF02
here Im using Zreport & Zform...
my requirment is to convert smartform output to PDF and send as an e-mail attachment on my Existing report
where I use the FM - CONVERT_OTF_2_PDF ..
here my code
REPORT yinvoice_is.
TABLES: vbrk,vbrp, vbak, vbap, vbkd .
DATA : it_vbap TYPE STANDARD TABLE OF vbap WITH HEADER LINE ,
it_vbrk LIKE STANDARD TABLE OF vbrk with header line,
it_vbkd TYPE STANDARD TABLE OF vbkd WITH HEADER LINE ,
it_vbrp TYPE STANDARD TABLE OF vbrp WITH HEADER LINE ,
it_vbrp1 TYPE STANDARD TABLE OF vbrp WITH HEADER LINE ,
it_vbfa TYPE STANDARD TABLE OF vbfa WITH HEADER LINE ,
it_adrc1 TYPE STANDARD TABLE OF adrc WITH HEADER LINE,
it_adrc2 TYPE STANDARD TABLE OF adrc WITH HEADER LINE.
DATA: sum TYPE vbrp-kzwi5.
DATA: v_vkbur TYPE vkbur,
v_adrnr1 TYPE adrnr,
v_adrnr2 TYPE adrnr,
v_vbelv TYPE vbelv,
v_delch TYPE vbeln,
v_bstkd TYPE bstkd,
v_kdmat TYPE kdmat,
v_kwert TYPE kwert.
DATA : fm_name TYPE rs38l_fnam.
PARAMETER p_inv_no LIKE vbrk-vbeln OBLIGATORY .
Selecting Data
SELECT VBELN
ERDAT
VKORG
KUNRG
STCEG
NETWR
MWSBK
KNUMV
KUNAG
REGIO
FROM vbrk
INTO CORRESPONDING FIELDS OF TABLE it_vbrk
WHERE vbeln = p_inv_no .
SELECT matnr
kzwi1
kzwi2
kzwi3
kzwi4
kzwi5
netwr
mwsbp
meins
fklmg
arktx
FROM vbrp
INTO CORRESPONDING FIELDS OF TABLE it_vbrp
WHERE vbeln = p_inv_no .
Selecting Sales Order No.
SELECT SINGLE vbelv
FROM vbfa
INTO v_vbelv
WHERE vbeln = p_inv_no
AND vbtyp_v = 'C'.
IF sy-subrc = 0.
Selecting Delivery Challan...
SELECT SINGLE vbeln
FROM vbfa
INTO v_delch
WHERE vbelv = v_vbelv
AND vbtyp_n = 'J'.
SELECT SINGLE bstkd
FROM vbkd
INTO v_bstkd
WHERE vbeln = v_vbelv .
SELECT matnr kdmat
FROM vbap
INTO CORRESPONDING FIELDS OF TABLE it_vbap
WHERE vbeln = v_vbelv.
ENDIF.
READ TABLE it_vbrk INDEX 1.
IF sy-subrc = 0.
SELECT SINGLE kwert
FROM konv
INTO v_kwert
WHERE knumv = iT_vbrk-knumv
AND kschl = 'HD00'.
ENDIF.
Selecting From Address
SELECT SINGLE vkbur
FROM vbak
INTO v_vkbur
WHERE vbeln = v_vbelv.
IF sy-subrc = 0.
SELECT SINGLE adrnr
FROM tvbur
INTO v_adrnr1
WHERE vkbur = v_vkbur.
IF sy-subrc = 0.
SELECT SINGLE *
FROM adrc
INTO CORRESPONDING FIELDS OF it_adrc1
WHERE addrnumber = v_adrnr1.
APPEND it_adrc1.
ENDIF.
ENDIF.
APPEND it_adrc.
Selecting TO Address
SELECT SINGLE adrnr
FROM vbpa
INTO v_adrnr2
WHERE vbeln = p_inv_no
AND parvw = 'RE'.
IF sy-subrc = 0.
SELECT SINGLE *
FROM adrc
INTO CORRESPONDING FIELDS OF it_adrc2
WHERE addrnumber = v_adrnr2.
APPEND it_adrc2.
ENDIF.
Calling Function Module
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = 'YINVOICE_IS'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
fm_name = fm_name
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Calling Function Module
CALL FUNCTION fm_name
*'/1BCDWB/SF00000496'
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
i_vbelv = v_vbelv
i_bstkd = v_bstkd
i_kdmat = v_kdmat
i_kwert = v_kwert
i_delch = v_delch
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
it_vbrk = it_vbrk
it_vbrp = it_vbrp
it_vbap = it_vbap
it_adrc1 = it_adrc1
it_adrc2 = it_adrc2
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "ENTRYhi,
use this code..
DATA: i_otf TYPE itcoo OCCURS 0 WITH HEADER LINE,
i_tline TYPE TABLE OF tline WITH HEADER LINE,
i_record LIKE solisti1 OCCURS 0 WITH HEADER LINE,
Objects to send mail.
i_objpack LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
i_objtxt LIKE solisti1 OCCURS 0 WITH HEADER LINE,
i_objbin LIKE solisti1 OCCURS 0 WITH HEADER LINE,
i_reclist LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
Variables declarations
v_len_in LIKE sood-objlen, "#EC NEEDED
v_lines_txt TYPE i,
v_lines_bin TYPE i,
Work Area declarations
w_ctrlop TYPE ssfctrlop,
w_return TYPE ssfcrescl,
w_compop TYPE ssfcompop,
wa_objhead TYPE soli_tab,
wa_doc_chng TYPE sodocchgi1,
wa_buffer TYPE string. "To convert from 132 to 255
Put a IF ELSE condition whether u want form output or E-mail output..
if it is a E-mail.. then call a small Sub-routine within your program..
FORM f_email .
w_ctrlop-getotf = 'X'.
w_ctrlop-no_dialog = 'X'.
w_compop-tdnoprev = 'X'.
CALL FUNCTION fnam
EXPORTING
control_parameters = w_ctrlop
output_options = w_compop
nast = nast
v_tcode = v_tcode
IMPORTING
job_output_info = w_return
TABLES
it_vbdkr = it_tvbdkr[]
it_vbdpr = tvbdpr[]
it_zglentitycode = it_zglentitycode[]
it_vttk = it_vttk[]
it_kna1 = it_kna1[]
it_t005 = it_t005[]
it_adrc = it_adrc[]
it_ekpo = it_ekpo[]
it_ekko = it_ekko[]
it_vbrp = it_vbrp[]
it_mara = it_mara[]
it_vbrk = it_vbrk[]
it_likp = it_likp[]
it_vttp = it_vttp[]
it_t001 = it_t001[]
it_zlogdely = it_zlogdely[]
it_prod = it_prod[]
it_lineitems = it_lineitems[]
it_tvzbt = it_tvzbt[]
it_t173t = it_t173t[]
it_t005t = it_t005t[]
it_zplant = it_zplant[]
it_stxbitmaps = it_stxbitmaps[]
it_prod_desc = it_prod_desc[].
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
i_otf[] = w_return-otfdata[].
*Converting the OFT format data to PDf format
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132
IMPORTING
bin_filesize = v_len_in
TABLES
otf = i_otf
lines = i_tline.
LOOP AT i_tline.
TRANSLATE i_tline USING '~'.
CONCATENATE wa_buffer i_tline INTO wa_buffer.
ENDLOOP.
TRANSLATE wa_buffer USING '~'.
DO.
i_record = wa_buffer.
APPEND i_record.
SHIFT wa_buffer LEFT BY 255 PLACES.
IF wa_buffer IS INITIAL.
EXIT.
ENDIF.
ENDDO.
Attachment
REFRESH:
i_reclist,
i_objtxt,
i_objbin,
i_objpack.
CLEAR wa_objhead.
i_objbin[] = i_record[].
Create Message Body
Title and Description
i_objtxt = 'COMMERCIAL INVOICE'.
APPEND i_objtxt.
DESCRIBE TABLE i_objtxt LINES v_lines_txt.
READ TABLE i_objtxt INDEX v_lines_txt.
wa_doc_chng-obj_name = 'COMMERCIAL INVOICE'.
wa_doc_chng-expiry_dat = sy-datum + 10.
wa_doc_chng-obj_descr = 'COMMERCIAL INVOICE'.
wa_doc_chng-sensitivty = 'F'.
wa_doc_chng-doc_size = v_lines_txt * 255.
CLEAR i_objpack-transf_bin.
i_objpack-head_start = 1.
i_objpack-head_num = 0.
i_objpack-body_start = 1.
i_objpack-body_num = v_lines_txt.
i_objpack-doc_type = 'RAW'.
APPEND i_objpack.
Attachment
(pdf-Attachment)
i_objpack-transf_bin = 'X'.
i_objpack-head_start = 1.
i_objpack-head_num = 0.
i_objpack-body_start = 1.
DESCRIBE TABLE i_objbin LINES v_lines_bin.
READ TABLE i_objbin INDEX v_lines_bin.
i_objpack-doc_size = v_lines_bin * 255 .
i_objpack-body_num = v_lines_bin.
i_objpack-doc_type = 'PDF'.
i_objpack-obj_name = 'COMMERCIAL INVOICE'.
i_objpack-obj_descr = 'COMMERCIAL INVOICE'.
APPEND i_objpack.
IF it_adr6[] IS NOT INITIAL.
LOOP AT it_adr6 INTO wa_adr6.
CLEAR i_reclist.
i_reclist-receiver = wa_adr6-smtp_addr.
i_reclist-rec_type = 'U'.
i_reclist-com_type = 'INT'.
APPEND i_reclist.
ENDLOOP.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = wa_doc_chng
put_in_outbox = 'X'
TABLES
packing_list = i_objpack
object_header = wa_objhead
contents_bin = i_objbin
contents_txt = i_objtxt
receivers = i_reclist.
ENDIF.
ENDFORM. " f_email
regards
vijay -
Smart Form convert to Pdf and send to email
hi,
ive dev the smart for me21n. its working fine. Standard programme is SAPLMEGUI.
now new requirement is , convert the smart form to pdf and then sending the pdf through email to customer.
Can any plz tell me is there any stadard programme or else need to custmise the print programme?
RegardsKirans belong to convert the smart form to pdf.
there is standard programme RSTXPDFT4
but after convert the form to pdf. i need to send it thorough mail.
iam checking other link one which is send by mr.naresh..
thank you
Regards -
CONVERT SCANNED FILE TO PDF AND SEND TO EMAIL!
I got many files that were scanned in (110) to be exact. I need to know how to convert the scanned files to pdf and then send them to an email. Thanks Marie
What is the format (file type) of these scanned docs?
-
Convert spool to PDF and send as email attachment
When i try to convert SAP spool to PDF and send it as email attachment, size of PDF document becomes large as compared to size of the PDF cocument i download using the same spool.
I am using following FMs.
CONVERT_ABAPSPOOLJOB_2_PDF to convert spool to PDF
and
SO_NEW_DOCUMENT_ATT_SEND_API1 to send email with attchment.
some times size of attchment exceeds 2MB and email results in error in SAP connect (SOST).
Any idea on how to compress the PDF attchment??
ThanksHi Venkat,
Can you plesae assist me.
I have a requirement to convert spool to pdf
send an email to users
issue is that attachement is big cant go through
I have used compress, but when I open the pdf file error that file was not correclty decoded
please assist, anyone -
Smartform (otf) as pdf and sending as email-attachment
Hello everybody,
when trying to convert a smartform to pdf and sending it with the FM 'SO_NEW_DOCUMENT_ATT_SEND_API1' i get an error when opening the pdf-file. It says ' a non identified Token w62.10 was found' and the pdf is all empty.
The problem seems to be somewhere between getting the pdf output data from the FM 'convert_otf' and trying to create a bin-object for the attachment.
Here is the code:
call function 'CONVERT_OTF'
EXPORTING
format = 'PDF'
* max_linewidth = 132
IMPORTING
bin_filesize = v_len_in
TABLES
otf = i_otf
lines = i_tline
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
others = 4.
* Fehlerhandling
if sy-subrc <> 0.
endif.
loop at i_tline.
translate i_tline using '~'.
concatenate wa_buffer i_tline into wa_buffer.
endloop.
translate wa_buffer using '~'.
do.
i_record = wa_buffer.
append i_record.
shift wa_buffer left by 255 places.
if wa_buffer is initial.
exit.
endif.
enddo.
* Attachment
refresh:
i_reclist,
i_objtxt,
i_objbin,
i_objpack.
clear wa_objhead.
i_objbin[] = i_record[].
******* Create Message Body
**** Title and Description
wa_doc_chng-obj_name = 'smartform'.
wa_doc_chng-expiry_dat = sy-datum + 10.
wa_doc_chng-obj_descr = 'smartform'.
wa_doc_chng-sensitivty = 'F'.
* wa_doc_chng-doc_size = v_lines_txt * 255.
**** Main Text
i_objtxt = 'test with pdf-Attachment!'.
append i_objtxt.
describe table i_objtxt lines v_lines_txt.
read table i_objtxt index v_lines_txt.
wa_doc_chng-doc_size = ( v_lines_txt - 1 ) * 255 + strlen( i_objtxt ).
clear i_objpack-transf_bin.
i_objpack-head_start = 1.
i_objpack-head_num = 0.
i_objpack-body_start = 1.
i_objpack-body_num = v_lines_txt.
i_objpack-doc_type = 'RAW'.
append i_objpack.
**** Attachment
* (pdf-Attachment)
i_objpack-transf_bin = 'X'.
i_objpack-head_start = 1.
i_objpack-head_num = 0.
i_objpack-body_start = 1.
* Länge des Attachment ermitteln
describe table i_objbin lines v_lines_bin.
read table i_objbin index v_lines_bin.
i_objpack-doc_size = ( v_lines_bin - 1 ) * 255 + strlen( i_objbin ).
i_objpack-body_num = v_lines_bin.
i_objpack-doc_type = 'PDF'.
i_objpack-obj_name = 'smart'.
i_objpack-obj_descr = 'test'.
append i_objpack.
clear i_reclist.
i_reclist-receiver = receiver.
i_reclist-rec_type = RECEIVER_TYPE.
append i_reclist.
if not receiver is initial.
call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = wa_doc_chng
put_in_outbox = 'X'
TABLES
packing_list = i_objpack
object_header = wa_objhead
CONTENTS_BIN = i_objbin
contents_txt = i_objtxt
receivers = i_reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
others = 8.Hi,
I just observed the following.
call function 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132 IMPORTING
bin_filesize = v_len_in
TABLES
otf = i_otf
lines = i_tline
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
others = 4.
i_objtxt = 'test with pdf-Attachment!'.
append i_objtxt.
describe table i_objtxt lines v_lines_txt.
read table i_objtxt index v_lines_txt.
wa_doc_chng-obj_name = 'smartform'.
wa_doc_chng-expiry_dat = sy-datum + 10.
wa_doc_chng-obj_descr = 'smartform'.
wa_doc_chng-sensitivty = 'F'.
wa_doc_chng-doc_size = v_lines_txt * 255.
clear i_objpack-transf_bin.
i_objpack-head_start = 1.
i_objpack-head_num = 0.
i_objpack-body_start = 1.
i_objpack-body_num = v_lines_txt.
i_objpack-doc_type = 'RAW'.
append i_objpack.
Attachment
(pdf-Attachment)
i_objpack-transf_bin = 'X'.
i_objpack-head_start = 1.
i_objpack-head_num = 0.
i_objpack-body_start = 1.
Länge des Attachment ermitteln
describe table i_objbin lines v_lines_bin.
read table i_objbin index v_lines_bin.
i_objpack-doc_size = v_lines_bin * 255 .
I just tried with your coding and then changed to the below coding.Now I am able to open the PDF in mail.
* Internal Table declarations
DATA: i_otf TYPE itcoo OCCURS 0 WITH HEADER LINE,
i_tline TYPE TABLE OF tline WITH HEADER LINE,
i_receivers TYPE TABLE OF somlreci1 WITH HEADER LINE,
i_record LIKE solisti1 OCCURS 0 WITH HEADER LINE,
* Objects to send mail.
i_objpack LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
i_objtxt LIKE solisti1 OCCURS 0 WITH HEADER LINE,
i_objbin LIKE solisti1 OCCURS 0 WITH HEADER LINE,
i_reclist LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
* Work Area declarations
wa_objhead TYPE soli_tab,
w_ctrlop TYPE ssfctrlop,
w_compop TYPE ssfcompop,
w_return TYPE ssfcrescl,
wa_doc_chng typE sodocchgi1,
w_data TYPE sodocchgi1,
wa_buffer TYPE string,"To convert from 132 to 255
* Variables declarations
v_form_name TYPE rs38l_fnam,
v_len_in LIKE sood-objlen,
v_len_out LIKE sood-objlen,
v_len_outn TYPE i,
v_lines_txt TYPE i,
v_lines_bin TYPE i.
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZZZ_TEST1'
importing
fm_name = v_form_name
exceptions
no_form = 1
no_function_module = 2
others = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
w_ctrlop-getotf = 'X'.
w_ctrlop-no_dialog = 'X'.
w_compop-tdnoprev = 'X'.
CALL FUNCTION v_form_name
EXPORTING
control_parameters = w_ctrlop
output_options = w_compop
user_settings = 'X'
IMPORTING
job_output_info = w_return
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
i_otf[] = w_return-otfdata[].
call function 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132
IMPORTING
bin_filesize = v_len_in
TABLES
otf = i_otf
lines = i_tline
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
others = 4.
* Fehlerhandling
if sy-subrc <> 0.
endif.
loop at i_tline.
translate i_tline using '~'.
concatenate wa_buffer i_tline into wa_buffer.
endloop.
translate wa_buffer using '~'.
do.
i_record = wa_buffer.
append i_record.
shift wa_buffer left by 255 places.
if wa_buffer is initial.
exit.
endif.
enddo.
* Attachment
refresh:
i_reclist,
i_objtxt,
i_objbin,
i_objpack.
clear wa_objhead.
i_objbin[] = i_record[].
******* Create Message Body
**** Title and Description
i_objtxt = 'test with pdf-Attachment!'.
append i_objtxt.
describe table i_objtxt lines v_lines_txt.
read table i_objtxt index v_lines_txt.
wa_doc_chng-obj_name = 'smartform'.
wa_doc_chng-expiry_dat = sy-datum + 10.
wa_doc_chng-obj_descr = 'smartform'.
wa_doc_chng-sensitivty = 'F'.
wa_doc_chng-doc_size = v_lines_txt * 255.
**** Main Text
* wa_doc_chng-doc_size = ( v_lines_txt - 1 ) * 255 + strlen( i_objtxt )
clear i_objpack-transf_bin.
i_objpack-head_start = 1.
i_objpack-head_num = 0.
i_objpack-body_start = 1.
i_objpack-body_num = v_lines_txt.
i_objpack-doc_type = 'RAW'.
append i_objpack.
**** Attachment
* (pdf-Attachment)
i_objpack-transf_bin = 'X'.
i_objpack-head_start = 1.
i_objpack-head_num = 0.
i_objpack-body_start = 1.
* Länge des Attachment ermitteln
describe table i_objbin lines v_lines_bin.
read table i_objbin index v_lines_bin.
i_objpack-doc_size = v_lines_bin * 255 .
i_objpack-body_num = v_lines_bin.
i_objpack-doc_type = 'PDF'.
i_objpack-obj_name = 'smart'.
i_objpack-obj_descr = 'test'.
append i_objpack.
clear i_reclist.
i_reclist-receiver = '[email protected]'.
i_reclist-rec_type = 'U'.
append i_reclist.
call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = wa_doc_chng
put_in_outbox = 'X'
TABLES
packing_list = i_objpack
object_header = wa_objhead
CONTENTS_BIN = i_objbin
contents_txt = i_objtxt
receivers = i_reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
others = 8.
If your problem is solved,kindly close the thread and reward points.If you need clarifications,get back. -
Convert spool to pdf and send in email sometimes attachment duplicated.
Hi all, I have a process that creates a spool, converts it to a pdf and then attaches it to an email. My problem is that sometimes, the same attachment is duplicated.
The process seems to work fine in debug mode (the attachment changes for each loop) but when I run it in the background, every few emails, it will duplicate an attachment.
I have noticed that the size of the pdf seems to change properly but that the content of the pdf does not match. So, it is like it gets the correct size of the pdf but not the body.
This is code that a consultant wrote and I am pretty new to abap/sap. I have changed some of the code because it was trying to handle an endless loop (I figured it should not have to handle (be in) an endless loop). I changed that code and it is working but this previous issue still exists. Thanks for your help.
*& Form PROCESS_EMPLOYEE
FORM process_employee .
* process appraisal only
IF it_final[] IS NOT INITIAL .
* READ DISTRIBUTION LIST *
REFRESH : it_email, it_idlient.
*Sort by supervisor
SORT it_final[] BY supervisor.
LOOP AT it_final INTO wa_final .
APPEND wa_final TO it_final1 .
AT END OF supervisor .
* Perform to create the PDF from the Output
report = 'zhr_pm_appemail'.
PERFORM create_pdf using report.
** Perform to email the PDF attachment
** to the supervisor and the Mailing list
subject = 'Performance Appraisals'.
PERFORM process_email using subject.
REFRESH it_final1 .
CLEAR it_final1 .
CLEAR wa_final .
FREE MEMORY ID 'MEM'.
ENDAT .
ENDLOOP.
ENDIF.
ENDFORM. " PROCESS_EMPLOYEE
*& Form CREATE_PDF
FORM create_pdf using report.
DATA: spoolno TYPE tsp01-rqident.
DATA : p_repid TYPE sy-repid .
DATA: v_len TYPE i , v_len1 TYPE i .
DATA: v_temp(8) TYPE c .
DATA: p_uname TYPE sy-uname .
DATA: it_tsp01 TYPE STANDARD TABLE OF tsp01 WITH HEADER LINE .
* DATA: it_pdf TYPE tline OCCURS 0 WITH HEADER LINE .
TABLES: tsp01.
DATA: var TYPE c .
*-- STRUCTURES
DATA:
lc_rq2name TYPE tsp01-rq2name.
DATA:
mstr_print_parms TYPE pri_params,
mc_valid(1) TYPE c,
mi_bytecount TYPE i,
mi_length TYPE i,
mi_rqident TYPE tsp01-rqident.
*-- INTERNAL TABLES
DATA:
mtab_pdf TYPE tline OCCURS 0 WITH HEADER LINE,
mc_filename TYPE rlgrap-filename.
*-- SELECTION SCREEN
DATA:
p_linsz TYPE sy-linsz VALUE 80, " Line size
p_paart TYPE sy-paart VALUE 'X_65_80'. " Paper Format
p_uname = sy-uname .
var = var + 1.
p_repid = report.
* START-OF-SELECTION .
concatenate p_repid+0(9)
p_uname+0(3)
into mc_filename
separated by '_'.
translate mc_filename to upper case.
*-- Setup the Print Parmaters
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
authority = space
copies = '1'
cover_page = space
data_set = space
department = space
destination = space
expiration = '1'
immediately = space
new_list_id = 'X'
no_dialog = 'X'
user = sy-uname
IMPORTING
out_parameters = mstr_print_parms
valid = mc_valid
EXCEPTIONS
archive_info_not_found = 1
invalid_print_params = 2
invalid_archive_params = 3
OTHERS = 4.
IF sy-subrc = 0 .
*--Make sure that a printer destination has been set up. If this is not done the PDF module abends.
*-- Explicitly set line width, and output format so that
*-- the PDF conversion comes out OK
mstr_print_parms-linsz = p_linsz.
mstr_print_parms-paart = p_paart.
EXPORT it_final1 it_email p_email1 p_sender p_date vl_nmth
TO MEMORY ID 'MEM' .
IF report = 'zhr_pm_appandprogemail'.
SUBMIT zhr_pm_appandprogemail TO SAP-SPOOL WITHOUT SPOOL DYNPRO
SPOOL PARAMETERS mstr_print_parms
VIA SELECTION-SCREEN AND RETURN.
ENDIF.
IF report = 'zhr_pm_appemail'.
SUBMIT zhr_pm_appemail TO SAP-SPOOL WITHOUT SPOOL DYNPRO
SPOOL PARAMETERS mstr_print_parms
VIA SELECTION-SCREEN AND RETURN.
ENDIF.
ENDIF.
*Find out what the spool number is that was just created
perform get_spool_number using p_repid p_uname changing mi_rqident.
*converting the spool request into pdf
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = mi_rqident
no_dialog = space
dst_device = mstr_print_parms-pdest
IMPORTING
pdf_bytecount = mi_bytecount
TABLES
pdf = it_pdf
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
OTHERS = 12.
* call function 'DOWNLOAD'
* exporting
* bin_filesize = mi_bytecount
* filename = mc_filename
* filetype = 'BIN'
* importing
* act_filename = mc_filename
* tables
* data_tab = it_mess_att.
CHECK sy-subrc = 0.
* Transfer the 132-long strings to 255-long strings
LOOP AT it_pdf INTO wa_pdf.
TRANSLATE wa_pdf USING ' ~'.
CONCATENATE v_gd_buffer wa_pdf INTO v_gd_buffer.
CLEAR wa_pdf .
ENDLOOP.
TRANSLATE v_gd_buffer USING '~ '.
DO.
it_mess_att = v_gd_buffer.
APPEND it_mess_att.
SHIFT v_gd_buffer LEFT BY 255 PLACES.
IF v_gd_buffer IS INITIAL.
EXIT.
ENDIF.
ENDDO.
ENDFORM. " CREATE_PDF
* FORM get_spool_nunber *
* Get the most recent spool created by user/report *
form get_spool_number using f_repid
f_uname changing f_rqident.
data:
lc_rq2name TYPE rlgrap-filename.
concatenate f_repid+0(6)
f_repid+7(3)
f_uname+0(3)
into lc_rq2name.
* separated by '_'.
translate lc_rq2name to upper case.
select * from tsp01 where rq2name = lc_rq2name
order by rqcretime descending.
f_rqident = tsp01-rqident.
exit.
endselect.
if sy-subrc ne 0.
clear f_rqident.
endif.
endform. " get spool number
*& Form SEND_MAIL
FORM send_email USING p_email subject.
REFRESH it_mess_bod.
* Default subject matter
gd_subject = text-019 ."'Subject'.
gd_attachment_desc = text-020 ."'Performance Appraisal'.
IF subject = 'Performance Appraisals and Progression I'.
gd_attachment_desc = 'PerfAppAndProg'.
ENDIF.
IF subject = 'Performance Appraisals'.
gd_attachment_desc = 'PerfAppraisal'.
ENDIF.
* If no sender specified - default blank
IF p_sender EQ space.
gd_sender_type = space.
ELSE.
gd_sender_type = 'INT'.
ENDIF.
* Send file by email as .pdf
PERFORM send_file_as_email_attachment
TABLES it_mess_bod
it_mess_att
USING p_email
subject
'PDF'
gd_attachment_desc
gd_attachment_desc
p_sender
gd_sender_type
CHANGING gd_error
gd_reciever.
ENDFORM. " SEND_MAIL
* FORM process_email *
FORM process_email using subject.
DESCRIBE TABLE it_mess_att LINES gd_recsize.
CHECK gd_recsize > 0.
PERFORM send_email USING p_email1 subject.
* perform send_email using p_email2.
ENDFORM. "process_email
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
* Send email
FORM send_file_as_email_attachment TABLES it_message
it_attach
USING p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
CHANGING p_error
p_reciever.
CLEAR : ld_email , ld_mtitle , ld_format , ld_attdescription ,
ld_attfilename , ld_sender_address , ld_sender_address_type ,
w_doc_data.
REFRESH: t_packing_list.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
* Fill the document data.
w_doc_data-doc_size = 1.
* Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
* Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = it_attach[].
* Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
* Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
* Add the recipients email address
CLEAR t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
LOOP AT it_email.
* Add the recipients email address
t_receivers-receiver = it_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
ENDLOOP.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
packing_list = t_packing_list
contents_bin = t_attachment
* CONTENTS_HEX = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
IF sy-subrc = 0.
PERFORM update_infotype_0019 .
ENDIF.
* Populate zerror return code
* ld_error = sy-subrc.
** stop .
* READ TABLE t_receivers WITH KEY retrn_code = '0' .
* IF sy-subrc = 0 .
* v_update_flag = '1' .
* EXPORT v_update_flag TO MEMORY ID 'MEM2' .
* ENDIF .
** Populate zreceiver return code
* LOOP AT t_receivers.
* ld_receiver = t_receivers-retrn_code.
* ENDLOOP.
ENDFORM. "send_file_as_email_attachment
*& Form GET_NEXT_MONTH
FORM get_next_month .
CLEAR v_month .
v_month = vl_nmth+4(2).
REFRESH it_t247 .
CLEAR it_t247 .
CALL FUNCTION 'IDWT_READ_MONTH_TEXT'
EXPORTING
langu = 'E'
month = v_month
IMPORTING
t247 = it_t247.
CLEAR v_mon_text .
v_mon_text = it_t247-ltx .
ENDFORM. " GET_NEXT_MONTH
Edited by: Katie Doody on Feb 24, 2010 12:30 AMThank you for your response, this has allowed me to identify the problem. It is when I create the spool by using the code below. If I add a wait after this, the program works successfully. Is there another way to write the data to create a spool within my initial program rather than doing the submit? Could it be that it is putting data in memory?
SUBMIT zhr_pm_appandprogemail TO SAP-SPOOL WITHOUT SPOOL DYNPRO
SPOOL PARAMETERS mstr_print_parms
VIA SELECTION-SCREEN AND RETURN.
*& Report ZHR_PM_APPANDPROGEMAIL
REPORT ZHR_PM_APPANDPROGEMAIL
NO STANDARD PAGE HEADING
LINE-SIZE 80
LINE-COUNT 65(8).
* MESSAGE-ID zhr.
* INTERNAL TABLES DECLARATION
DATA: it_pdf TYPE tline OCCURS 0 ." WITH HEADER LINE .
* WORK AEA DECLARATION
DATA: wa_pdf TYPE tline .
* Spool to PDF conversions
*DATA: "gd_spool_nr TYPE tsp01-rqident,
* gd_destination TYPE rlgrap-filename,
* gd_bytecount TYPE tst01-dsize,
DATA:v_update_flag TYPE c . "flag for updating infotype 41 last appraisal date
DATA: v_gd_buffer TYPE string.
DATA: BEGIN OF it_final1 OCCURS 0 ,
supervisor TYPE persno ,
pernr TYPE persno ,
ename TYPE pa0001-ename ,
subgroup TYPE persk ,
stext TYPE t503t-ptext ,
lastapp TYPE dats ,
lastjob TYPE dats ,
email TYPE ztype,
darxx(5) TYPE c,
progression(1) TYPE c,
supervisor_desc(50) TYPE c,
END OF it_final1 .
DATA: t_packing_list TYPE sopcklsti1 OCCURS 0 WITH HEADER LINE,
t_contents TYPE solisti1 OCCURS 0 WITH HEADER LINE,
t_receivers TYPE somlreci1 OCCURS 0 WITH HEADER LINE,
t_attachment TYPE solisti1 OCCURS 0 WITH HEADER LINE,
t_object_header TYPE solisti1 OCCURS 0 WITH HEADER LINE,
w_cnt TYPE i,
w_sent_all(1) TYPE c,
w_doc_data TYPE sodocchgi1 .
DATA: gd_error TYPE sy-subrc,
gd_reciever TYPE sy-subrc.
DATA: v_flag TYPE c VALUE '1' .
DATA: BEGIN OF it_final OCCURS 0 ,
subgroup TYPE persk ,
supervisor TYPE persno ,
pernr TYPE persno ,
ename TYPE pa0001-ename ,
stext TYPE t503t-ptext ,
lastapp TYPE dats ,
lastjob TYPE dats ,
email TYPE ztype,
progression(1) TYPE c,
supervisor_desc(50) TYPE c,
END OF it_final .
DATA:it_t247 TYPE STANDARD TABLE OF t247 WITH HEADER LINE .
DATA: it_email TYPE STANDARD TABLE OF zemail WITH HEADER LINE.
*VARIABLE DECLARATION
DATA: p_date TYPE sy-datum , "excution date
vl_date TYPE sy-datum ,
p_email1 TYPE somlreci1-receiver , "receiver
p_sender TYPE somlreci1-receiver . "sender
DATA: w_recsize TYPE i.
DATA: gd_recsize TYPE i.
DATA : vl_nmth TYPE sy-datum.
DATA: v_month(2) TYPE n .
DATA: v_mon_text TYPE t247-ltx .
*START OF SELECTION
START-OF-SELECTION .
REFRESH t_receivers.
IMPORT it_final1 it_email p_email1 p_sender p_date vl_nmth FROM MEMORY ID 'MEM'.
PERFORM get_next_month .
LOOP AT it_final1 .
IF it_final1-progression IS NOT INITIAL.
MOVE-CORRESPONDING it_final1 TO it_final .
APPEND it_final .
CLEAR it_final .
* Add the recipients email address
t_receivers-receiver = it_final1-email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
ENDIF.
ENDLOOP .
PERFORM write_output .
*END OF SELECTION
END-OF-SELECTION .
*& Form WRITE_OUTPUT
FORM write_output .
DATA: l_date(14) TYPE c ,
l_date_temp(14) TYPE c ,
v_date(10) TYPE c ,
v_date1(20) TYPE c ,
v_date1_temp(20) TYPE c ,
f_date(10) TYPE c.
DATA: lv_stext TYPE t503t-ptext .
CLEAR : v_date, v_date1.
CONCATENATE p_date+4(02) p_date+6(02) p_date+0(04)'.' INTO v_date.
CONCATENATE v_mon_text p_date+0(4) INTO l_date_temp SEPARATED BY space.
CONCATENATE l_date_temp '.' INTO l_date.
CONCATENATE v_mon_text vl_nmth+6(2) INTO v_date1_temp SEPARATED BY space.
CONCATENATE v_date1_temp ',' INTO v_date1_temp.
CONCATENATE v_date1_temp vl_nmth(4) INTO v_date1_temp SEPARATED BY space.
CONCATENATE v_date1_temp '.' INTO v_date1.
CONDENSE l_date .
FORMAT INTENSIFIED ON.
SKIP 4.
WRITE:/(80) text-001 CENTERED . "'METROPOLITAN UTILITIES DISTRICT'.
WRITE:/(80) text-002 CENTERED . "'OMAHA NEBR.'.
SKIP 2.
WRITE:/(80) text-003 CENTERED . "'Inter-Departmental Communication'.
FORMAT INTENSIFIED OFF.
WRITE :/(80) v_date CENTERED using edit mask '__/__/____'. " v_date.
SKIP 2.
WRITE: /10 text-004. "'SUBJECT: Performance Appraisals and Progression Increase'.
SKIP 1.
WRITE: /10 text-005, it_final1-supervisor_desc. "'TO: Supervisor'.
SKIP 1.
WRITE: /10 text-006. "'FROM: Anne M. Undajon, Director of Compensation and Benefits'.
SKIP 2.
WRITE:/10 text-007 . "'Listed below are the employees in your area who are due a '.
WRITE:/10 text-008 ,l_date. "'Performance Appraisal during the month of ',l_date.'. "v_mon_text , P_date+0(4)
WRITE:/10 text-009 . "'These employees are also eligible for a progression increase.
WRITE:/10 text-010 . "' A performance appraisal form can be found on-line in the MUD '.
WRITE:/10 text-011 . "'template section. The Performance Appraisal is to be completed '
WRITE:/10 text-012 . "'and discussed with the employee by the immediate supervisor.'
SKIP 2.
WRITE:/10 text-013. "Signed forms should be returned to the Human Resource Department by '.
WRITE:/10 v_date1.
SKIP 2 .
SORT it_final[] BY subgroup .
LOOP AT it_final .
CLEAR: lv_stext .
lv_stext = it_final-stext.
AT NEW subgroup .
TRANSLATE lv_stext TO UPPER CASE .
WRITE:/(80) lv_stext CENTERED .
SKIP 2 .
WRITE: 10 text-014 . "'Employee name' .
WRITE: 32 text-015 . "'Job Date' .
WRITE :44 text-016 . "'Last Appraisal' .
WRITE :59 text-021 . "'Employee' .
WRITE :/10 '--------------------' , 32'----------', 44 '--------------', 59 '--------'.
ENDAT .
WRITE:/10 it_final-ename .
WRITE: 32 it_final-lastjob using edit mask '__/__/____'.
CONCATENATE it_final-lastapp+4(02) it_final-lastapp+6(02) it_final-lastapp+0(04) INTO f_date.
WRITE :44 f_date using edit mask '__/__/____'.
SHIFT it_final-pernr left deleting leading '0'.
WRITE : 59 it_final-pernr.
SKIP 2 .
ENDLOOP.
SKIP 4.
WRITE :10 text-017. "'Anne M. Undajon'.
FORMAT INTENSIFIED ON.
WRITE:/10 text-018. "'Director of Compensation & Benefits'.
FORMAT INTENSIFIED OFF.
ENDFORM. " WRITE_OUTPUT
*& Form GET_NEXT_MONTH
FORM get_next_month .
CLEAR v_month .
v_month = vl_nmth+4(2).
REFRESH it_t247 .
CLEAR it_t247 .
CALL FUNCTION 'IDWT_READ_MONTH_TEXT'
EXPORTING
langu = 'E'
month = v_month
IMPORTING
t247 = it_t247.
CLEAR v_mon_text .
v_mon_text = it_t247-ltx .
ENDFORM. " GET_NEXT_MONTH
Edited by: Katie Doody on Feb 24, 2010 4:07 PM -
Convert Script to PDF using RVADOPFO, w/o using spool and send via email
I want to convert output type script to pdf using the standard include RVADOPFO in the program. The output type is defined as medium '5' and comm starategy is also defined as INT(email) as want to send the output via email.
Now the Include RVADOPFO contains ADDR_KEY-ADDRNUMBER & ADDR_KEY-PERSNUMBER. Where to maintain this info and how to pass in the include..below code is in the include..
IF NOT NAST-TCODE IS INITIAL AND NAST-NACHA EQ '5'.
... use stratagy to get communication type
CALL FUNCTION 'ADDR_GET_NEXT_COMM_TYPE'
EXPORTING
STRATEGY = NAST-TCODE
ADDRESS_TYPE =
ADDRESS_NUMBER = VBDKA-ADRNR
PERSON_NUMBER = VBDKA-ADRNP
ADDRESS_NUMBER = ADDR_KEY-ADDRNUMBER
PERSON_NUMBER = ADDR_KEY-PERSNUMBER
IMPORTING
COMM_TYPE = LVS_COMM_TYPE
COMM_VALUES = LVS_COMM_VALUES
TABLES
STRATEGY_TABLE =
EXCEPTIONS
ADDRESS_NOT_EXIST = 1
PERSON_NOT_EXIST = 2
NO_COMM_TYPE_FOUND = 3
INTERNAL_ERROR = 4
PARAMETER_ERROR = 5
OTHERS = 6.
Please provide solution asap. Thanks in advanceHi,
Check this links:
Sending Mail from SAP
https://wiki.sdn.sap.com/wiki/display/sandbox/SendMailwithPDFAttachment?showChildren=false#children
Thanks. -
Convertion of Smart form to pdf and sending mail to vendor for PO
Hello all,
I have modified a standard PO Smartform and running it through ME23N.
In this i have to convert it to a pdf file and then send it through mail to the vendor.
I have found out FMs'CONVERT_OTF'and
'SO_NEW_DOCUMENT_ATT_SEND_API1'
to convert it and send mail. But can u tell me how to go about using it.
As i am using a standard program do i have to copy this prog to zprog and then call the fm out there. I am not sure.
Thanks
SalilHi,
Here is the sample code.If you find this as useful,kindly reward points by clicking the star on the left of reply.
Internal Table declarations
DATA: i_otf TYPE itcoo OCCURS 0 WITH HEADER LINE,
i_tline TYPE TABLE OF tline WITH HEADER LINE,
i_receivers TYPE TABLE OF somlreci1 WITH HEADER LINE,
i_record LIKE solisti1 OCCURS 0 WITH HEADER LINE,
Objects to send mail.
i_objpack LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
i_objtxt LIKE solisti1 OCCURS 0 WITH HEADER LINE,
i_objbin LIKE solisti1 OCCURS 0 WITH HEADER LINE,
i_reclist LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
Work Area declarations
w_objhead TYPE soli_tab,
w_ctrlop TYPE ssfctrlop,
w_compop TYPE ssfcompop,
w_return TYPE ssfcrescl,
w_doc_chng typE sodocchgi1,
w_data TYPE sodocchgi1,
w_buffer TYPE string,"To convert from 132 to 255
Variables declarations
v_form_name TYPE rs38l_fnam,
v_len_in LIKE sood-objlen,
v_len_out LIKE sood-objlen,
v_len_outn TYPE i,
v_lines_txt TYPE i,
v_lines_bin TYPE i.
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZZZ_TEST2'
importing
fm_name = v_form_name
exceptions
no_form = 1
no_function_module = 2
others = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
w_ctrlop-getotf = 'X'.
w_ctrlop-no_dialog = 'X'.
w_compop-tdnoprev = 'X'.
CALL FUNCTION v_form_name
EXPORTING
control_parameters = w_ctrlop
output_options = w_compop
user_settings = 'X'
IMPORTING
job_output_info = w_return
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
i_otf[] = w_return-otfdata[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132
IMPORTING
bin_filesize = v_len_in
TABLES
otf = i_otf
lines = i_tline
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Convert PDF from 132 to 255.
LOOP AT i_tline.
Replacing space by ~
TRANSLATE i_tline USING ' ~'.
CONCATENATE w_buffer i_tline INTO w_buffer.
ENDLOOP.
Replacing ~ by space
TRANSLATE w_buffer USING '~ '.
DO.
i_record = w_buffer.
Appending 255 characters as a record
APPEND i_record.
SHIFT w_buffer LEFT BY 255 PLACES.
IF w_buffer IS INITIAL.
EXIT.
ENDIF.
ENDDO.
Refresh: i_reclist,
i_objtxt,
i_objbin,
i_objpack.
clear w_objhead.
Object with PDF.
i_objbin[] = i_record[].
DESCRIBE TABLE i_objbin LINES v_lines_bin.
Object with main text of the mail.
i_objtxt = 'Find attached the output of the smart form.'.
APPEND i_objtxt.
i_objtxt = 'Regards,'.
APPEND i_objtxt.
i_objtxt = 'J.Jayanthi'.
APPEND i_objtxt.
DESCRIBE TABLE i_objtxt LINES v_lines_txt.
Document information.
w_doc_chng-obj_name = 'Smartform'.
w_doc_chng-expiry_dat = sy-datum + 10.
w_doc_chng-obj_descr = 'Smart form output'.
w_doc_chng-sensitivty = 'F'. "Functional object
w_doc_chng-doc_size = v_lines_txt * 255.
Pack to main body as RAW.
Obj. to be transported not in binary form
CLEAR i_objpack-transf_bin.
Start line of object header in transport packet
i_objpack-head_start = 1.
Number of lines of an object header in object packet
i_objpack-head_num = 0.
Start line of object contents in an object packet
i_objpack-body_start = 1.
Number of lines of the object contents in an object packet
i_objpack-body_num = v_lines_txt.
Code for document class
i_objpack-doc_type = 'RAW'.
APPEND i_objpack.
Packing as PDF.
i_objpack-transf_bin = 'X'.
i_objpack-head_start = 1.
i_objpack-head_num = 1.
i_objpack-body_start = 1.
i_objpack-body_num = v_lines_bin.
i_objpack-doc_type = 'PDF'.
i_objpack-obj_name = 'Smartform'.
CONCATENATE 'Smartform_output' '.pdf'
INTO i_objpack-obj_descr.
i_objpack-doc_size = v_lines_bin * 255.
APPEND i_objpack.
Document information.
CLEAR i_reclist.
e-mail receivers.
i_reclist-receiver = '[email protected]'.
i_reclist-express = 'X'.
i_reclist-rec_type = 'U'. "Internet address
APPEND i_reclist.
Sending mail.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = w_doc_chng
put_in_outbox = 'X'
TABLES
packing_list = i_objpack
object_header = w_objhead
contents_hex = i_objbin
contents_txt = i_objtxt
receivers = i_reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. -
Convert smartform spool to 2 pdf and send it by mail
Hi! Can someone show me some code how to call the smartform and use the spool to convert to pdf and then send it by mail?
Thanks in advance,
Regardshai
its very useful for u
Object ID : PTP_TS_FRM_202 *
Description : Print Program For PO Goods Receipt Document *
Developer : Ganesh Shanker Vidyarthi *
Date : 11/06/2006 *
Genentech Contact : *
Functional Contact : *
Purpose : This program is driver program of Goods Receipt*
Printing. *
Program Logic : The Goods Receipt form (Raw material worksheet) *
would be created once we entered the values of
MBLNR MJAHR ZEILE fields on the selection screen.
Modification Log *
Changed On Developer Transport No. Description *
11/06/2006 G.S.Vidyarthi Creation *
REPORT zptpfrm202p_pogr_pr_instr MESSAGE-ID zmm.
TABLES *
Database table made for getting information about PRINTPREVIEW and
PRINT command more than one times
TABLES: zgr_table.
TYPE-POOLS:syscr.
GLOBAL TYPE DECLARATION *
DATA: zdoc_output_info TYPE ssfcrespd, "SF:Return Document Inf.
zjob_output_info TYPE ssfcrescl, "SF:Return value at end of
form printing
i_control TYPE ssfctrlop ,
i_output_options TYPE ssfcompop,
zjob_output_opts TYPE ssfcresop. "SF:Return value at start
of form printing
*This internal table is used for storing Document Segment: Material
DATA: BEGIN OF i_mseg.
INCLUDE STRUCTURE mseg.
DATA: END OF i_mseg.
This internal table is used for storing Header: Material Document
DATA: BEGIN OF i_mkpf.
INCLUDE STRUCTURE mkpf.
DATA: END OF i_mkpf.
*Variables
DATA flag(1) TYPE c.
DATA: vfile TYPE string.
SELECTION-SCREEN *
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-000.
PARAMETERS:p_mblnr TYPE mkpf-mblnr OBLIGATORY MATCHCODE OBJECT zganesh,
p_mjahr TYPE mkpf-mjahr OBLIGATORY MATCHCODE OBJECT zganesh1,
p_zeile TYPE mseg-zeile OBLIGATORY MATCHCODE OBJECT zganesh2.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-001.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 10.
PARAMETER:r_disp RADIOBUTTON GROUP g1 USER-COMMAND u1 DEFAULT 'X'.
SELECTION-SCREEN:COMMENT 15(10) text-002 .
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 10.
PARAMETERS: r_down RADIOBUTTON GROUP g1.
SELECTION-SCREEN:COMMENT 15(10) text-003.
*PARAMETERS: v_file LIKE rlgrap-filename .
*SELECTION-SCREEN:COMMENT 70(50) text-005.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 10.
PARAMETERS: r_print RADIOBUTTON GROUP g1 .
SELECTION-SCREEN:COMMENT 15(10) text-004.
SELECTION-SCREEN END OF LINE.
PARAMETERS: v_file LIKE rlgrap-filename MODIF ID g12.
SELECTION-SCREEN END OF BLOCK b2.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR v_file.
DATA : wlv_field_name LIKE dynpread-fieldname,
wlv_file_name LIKE ibipparms-path.
wlv_field_name = v_file.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
field_name = wlv_field_name
IMPORTING
file_name = wlv_file_name.
IF sy-subrc EQ 0.
vfile = wlv_file_name.
v_file = wlv_file_name.
ENDIF.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF screen-name = 'V_FILE'.
IF r_disp EQ 'X' OR r_print EQ 'X'.
screen-input = 0.
ELSE.
screen-input = '1'.
ENDIF.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
START-OF-SELECTION EVENT *
START-OF-SELECTION.
CALLING CONVERSION FUNCTION MODULE 'CONVERSION_EXIT_ALPHA_INPUT' *
*Conversion function module for appending 00 befor MBLNR FIELD
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = p_mblnr
IMPORTING
output = p_mblnr.
Call subroutine for fetching data from database
PERFORM get_data.
END-OF-SELECTION EVENT *
END-OF-SELECTION.
Call subroutine for calling and processing smartform
PERFORM call_smartform.
*& Form get_data
Subroutine for fetching data from database
FORM get_data .
Fetching data from MKPF table with using parameters MBLNR and MJAHR
SELECT SINGLE * FROM mkpf
INTO i_mkpf
WHERE mblnr = p_mblnr
AND mjahr = p_mjahr.
IF sy-subrc EQ 0.
Fetching data from MSEG with using parameters MBLNR,ZEILE and MJAHR
SELECT SINGLE * FROM mseg
INTO i_mseg
WHERE mblnr = i_mkpf-mblnr
AND mjahr = i_mkpf-mjahr
AND zeile = p_zeile.
IF sy-subrc NE 0.
CLEAR i_mseg.
ENDIF.
ELSE.
MESSAGE i000.
EXIT.
ENDIF.
ENDFORM. " get_data
*& Form call_smartform
Subroutine for calling smartform
FORM call_smartform .
Local template used in the processing output of smartform
TYPES: BEGIN OF lt_ztable,
mandt TYPE sy-mandt,
mblnr TYPE mseg-mblnr,
flag(1) TYPE c,
END OF lt_ztable.
CONSTANTS: c_x(1) TYPE c VALUE 'X'.
Workarea
DATA: lw_ztable TYPE lt_ztable.
*Variable used in the smartform
DATA: lv_form(30) TYPE c,
lv_fm_name(30) TYPE c.
lv_form = 'ZPTPFRM202L_POGR'.
*Calling function module SSF_FUNCTION_MODULE_NAME which gives new name
*to the function module that will generated by smartform.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = lv_form
IMPORTING
fm_name = lv_fm_name
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*Calling function module that will be generated by smartform
IF r_disp = c_x.
i_output_options-tdimmed = space.
i_output_options-tdnewid = c_x.
i_output_options-tddest = 'LOCL'.
i_control-no_dialog = 'X'.
i_control-preview = 'X'.
ELSEIF r_print = c_x.
i_output_options-tdimmed = c_x.
i_output_options-tddest = 'LOCL'.
i_control-no_dialog = c_x.
ELSE.
i_output_options-tdimmed = space.
i_output_options-tdnewid = c_x.
i_output_options-tddest = 'LOCL'.
i_control-getotf = 'X'.
i_control-preview = space.
i_control-no_dialog = c_x.
flag = c_x.
ENDIF.
CALL FUNCTION lv_fm_name
EXPORTING
control_parameters = i_control
output_options = i_output_options
user_settings = space
zmkpf = i_mkpf
zmseg = i_mseg
IMPORTING
document_output_info = zdoc_output_info
job_output_info = zjob_output_info
job_output_options = zjob_output_opts
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Modify the database table if it found the print command
IF zjob_output_opts-tdpreview NE c_x.
lw_ztable-mandt = sy-mandt.
lw_ztable-mblnr = p_mblnr.
lw_ztable-flag = c_x.
MODIFY zgr_table FROM lw_ztable.
CLEAR lw_ztable.
ENDIF.
IF flag EQ c_x.
DATA: li_lines LIKE tline OCCURS 100 WITH HEADER LINE.
DATA: lv_file TYPE string,
lbin_fsiz TYPE i.
lv_file = v_file.
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
IMPORTING
bin_filesize = lbin_fsiz
TABLES
otf = zjob_output_info-otfdata
lines = li_lines
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
err_bad_otf = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
bin_filesize = lbin_fsiz
filename = lv_file
filetype = 'BIN'
TABLES
data_tab = li_lines
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
OTHERS = 22.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDIF.
ENDFORM. " call_smartform
**Please reward suitable points***
With Regards
Navin Khedikar -
Hi,
I am using CRM ONLINE 2013.
How to automate below process?
1. On Approval Of Quotation, Run Report.
2. Generate PDF.
3. Send an Email With PDF as attachment.
As i have gone through many forums for this topic, but creating a plugin code for generating Report PDF is not possible in CRM ONLINE.
So, What is the alternate way to do this..?
Thanks.This is my entire code mentioned below:-
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title></title>
<script type="text/javascript" src="https://ajax.googleapis.com/ajax/libs/jquery/1.4.1/jquery.min.js"></script>
<script type="text/javascript">
if (typeof (SDK) == "undefined")
{ SDK = { __namespace: true }; }
SDK.JScriptRESTDataOperations = {
_context: function () {
if (typeof GetGlobalContext != "undefined")
{ return GetGlobalContext(); }
else {
if (typeof Xrm != "undefined") {
return Xrm.Page.context;
else { return new Error("Context is not available."); }
_getServerUrl: function () {
var serverUrl = this._context().getServerUrl()
if (serverUrl.match(/\/$/)) {
serverUrl = serverUrl.substring(0, serverUrl.length - 1);
return serverUrl;
_ODataPath: function () {
return this._getServerUrl() + "/XRMServices/2011/OrganizationData.svc/";
_errorHandler: function (req) {
return new Error("Error : " +
req.status + ": " +
req.statusText + ": " +
JSON.parse(req.responseText).error.message.value);
_dateReviver: function (key, value) {
var a;
if (typeof value === 'string') {
a = /Date\(([-+]?\d+)\)/.exec(value);
if (a) {
return new Date(parseInt(value.replace("/Date(", "").replace(")/", ""), 10));
return value;
Create: function (object, type, successCallback, errorCallback) {
var req = new XMLHttpRequest();
req.open("POST", this._ODataPath() + type + "Set", true);
req.setRequestHeader("Accept", "application/json");
req.setRequestHeader("Content-Type", "application/json; charset=utf-8");
req.onreadystatechange = function () {
if (this.readyState == 4 /* complete */) {
if (this.status == 201) {
successCallback(JSON.parse(this.responseText, SDK.JScriptRESTDataOperations._dateReviver).d);
else {
errorCallback(SDK.JScriptRESTDataOperations._errorHandler(this));
req.send(JSON.stringify(object));
Retrieve: function (id, type, successCallback, errorCallback) {
var req = new XMLHttpRequest();
req.open("GET", this._ODataPath() + type + "Set(guid'" + id + "')", true);
req.setRequestHeader("Accept", "application/json");
req.setRequestHeader("Content-Type", "application/json; charset=utf-8");
req.onreadystatechange = function () {
if (this.readyState == 4 /* complete */) {
if (this.status == 200) {
successCallback(JSON.parse(this.responseText, SDK.JScriptRESTDataOperations._dateReviver).d);
else {
errorCallback(SDK.JScriptRESTDataOperations._errorHandler(this));
req.send();
Update: function (id, object, type, successCallback, errorCallback) {
var req = new XMLHttpRequest();
req.open("POST", this._ODataPath() + type + "Set(guid'" + id + "')", true);
req.setRequestHeader("Accept", "application/json");
req.setRequestHeader("Content-Type", "application/json; charset=utf-8");
req.setRequestHeader("X-HTTP-Method", "MERGE");
req.onreadystatechange = function () {
if (this.readyState == 4 /* complete */) {
if (this.status == 204 || this.status == 1223) {
successCallback();
else {
errorCallback(SDK.JScriptRESTDataOperations._errorHandler(this));
req.send(JSON.stringify(object));
Delete: function (id, type, successCallback, errorCallback) {
var req = new XMLHttpRequest();
req.open("POST", this._ODataPath() + type + "Set(guid'" + id + "')", true);
req.setRequestHeader("Accept", "application/json");
req.setRequestHeader("Content-Type", "application/json; charset=utf-8");
req.setRequestHeader("X-HTTP-Method", "DELETE");
req.onreadystatechange = function () {
if (this.readyState == 4 /* complete */) {
if (this.status == 204 || this.status == 1223) {
successCallback();
else {
errorCallback(SDK.JScriptRESTDataOperations._errorHandler(this));
req.send();
RetrieveMultiple: function (type, filter, successCallback, errorCallback) {
if (filter != null) {
filter = "?" + filter;
else { filter = ""; }
var req = new XMLHttpRequest();
req.open("GET", this._ODataPath() + type + "Set" + filter, true);
req.setRequestHeader("Accept", "application/json");
req.setRequestHeader("Content-Type", "application/json; charset=utf-8");
req.onreadystatechange = function () {
if (this.readyState == 4 /* complete */) {
if (this.status == 200) {
successCallback(JSON.parse(this.responseText, SDK.JScriptRESTDataOperations._dateReviver).d.results);
else {
errorCallback(SDK.JScriptRESTDataOperations._errorHandler(this));
req.send();
__namespace: true
</script>
<script type="text/javascript">
//Create Email and link it with Order as Regarding field
var Xrm;
var email = new Object();
var ownerID = "";
var CustomerId = "";
if (window.opener) { Xrm = window.opener.Xrm; }
else if (window.parent) { Xrm = window.parent.Xrm; }
//Get ownerid who send email of quotation to customer
function GetOwnerID() {
var owner = Xrm.Page.getAttribute("ownerid").getValue();
ownerID = owner[0].id;
var ownerName = owner[0].name;
var entityType = owner[0].entityType;
GetToEmailGUID();
//Get customerid who receive email of quotation from owner
function GetToEmailGUID() {
var Customer = Xrm.Page.getAttribute('customerid').getValue();
CustomerId = Customer[0].id;
var CustomerName = Customer[0].name;
var entityType = Customer[0].entityType;
//if CustomerId is type of "Account" then get Primary Contact id of that account
if (entityType == "account") {
var contact = Xrm.Page.getAttribute("customerid").getValue();
if (contact === null) return;
var serverUrl = Xrm.Page.context.getClientUrl();
var oDataSelect = serverUrl + "/XRMServices/2011/OrganizationData.svc/AccountSet(guid'" + contact[0].id + "')?$select=PrimaryContactId";
var req = new XMLHttpRequest();
req.open("GET", oDataSelect, false);
req.setRequestHeader("Accept", "application/json");
req.setRequestHeader("Content-Type", "application/json;charset=utf-8");
req.onreadystatechange = function () {
if (req.readyState === 4) {
if (req.status === 200) {
var retrieved = JSON.parse(req.responseText).d;
CustomerId = retrieved.PrimaryContactId.Id;
else {
alert(this.statusText);
req.send();
function CreateEmail() {
GetOwnerID();
email.Subject = "Email with Report Attachment";
//Set The current order as the Regarding object
email.RegardingObjectId = {
Id: Xrm.Page.data.entity.getId(), //Get the current entity Id , here OrderId
LogicalName: Xrm.Page.data.entity.getEntityName()//Get the current entity name, here it will be “salesOrder”
//Create Email Activity
SDK.JScriptRESTDataOperations.Create(email, "Email", EmailCallBack, function (error) { alert(error.message); });
// Email Call Back function
function EmailCallBack(result) {
email = result; // Set the email to result to use it later in email attachment for retrieving activity Id
var activityPartyFrom = new Object();
// Set the From party of the ActivityParty to relate an entity with Email From field
activityPartyFrom.PartyId = {
Id: CustomerId, //"79EBDD26-FDBE-E311-8986-D89D6765B238", // id of entity you want to associate this activity with.
LogicalName: "contact"
// Set the "activity" of the ActivityParty
activityPartyFrom.ActivityId = {
Id: result.ActivityId,
LogicalName: "email"
// Now set the participation type that describes the role of the party on the activity).
activityPartyFrom.ParticipationTypeMask = { Value: 2 }; // 2 means ToRecipients
// Create the from ActivityParty for the email
SDK.JScriptRESTDataOperations.Create(activityPartyFrom, "ActivityParty", ActivityPartyFromCallBack, function (error) { alert(error.message); });
var activityPartyTo = new Object();
// Set the From party of the ActivityParty to relate an entity with Email From field
activityPartyTo.PartyId = {
Id: ownerID, //"79EBDD26-FDBE-E311-8986-D89D6765B238", // id of entity you want to associate this activity with.
LogicalName: "systemuser"
// Set the "activity" of the ActivityParty
activityPartyTo.ActivityId = {
Id: result.ActivityId,
LogicalName: "email"
// Now set the participation type that describes the role of the party on the activity).
activityPartyTo.ParticipationTypeMask = { Value: 1 }; // 1 means Sender
// Create the from ActivityParty
SDK.JScriptRESTDataOperations.Create(activityPartyTo, "ActivityParty", ActivityPartyToCallBack, function (error) { alert(error.message); });
//ActivityParty From Callback
function ActivityPartyFromCallBack(result) {
//ActivityParty To Callback
function ActivityPartyToCallBack(result) {
GetReportId('ABM_Infotech_SalesQuote');
//Create attachment for the created email
function CreateEmailAttachment() {
//get reporting session and use the params to convert a report in PDF
var params = getReportingSession();
//Email attachment parameters
var activitymimeattachment = Object();
activitymimeattachment.ObjectId = Object();
activitymimeattachment.ObjectId.LogicalName = "email";
activitymimeattachment.ObjectId.Id = email.ActivityId;
activitymimeattachment.ObjectTypeCode = "email",
activitymimeattachment.Subject = "File Attachment";
activitymimeattachment.Body = encodePdf(params);
activitymimeattachment.FileName = "Report1.pdf";
activitymimeattachment.MimeType = "application/pdf";
//Attachment call
SDK.JScriptRESTDataOperations.Create(activitymimeattachment, "ActivityMimeAttachment", ActivityMimeAttachmentCallBack, function (error) { alert(error.message); });
//ActivityMimeAttachment CallBack function
function ActivityMimeAttachmentCallBack(result) {
var features = "location=no,menubar=no,status=no,toolbar=no,resizable=yes";
var width = "800px";
var height = "600px";
window.open(Xrm.Page.context.getServerUrl() + "main.aspx?etc=" + 4202 + "&pagetype=entityrecord&id=" + email.ActivityId, "_blank", features);
// To open window which works in outlook and IE both
//openStdWin(Xrm.Page.context.getServerUrl() + "main.aspx?etc=" + 4202 + "&pagetype=entityrecord&id=" + email.ActivityId, "_blank", width,
height, features);
//This method will get the reportId based on a report name that will be used in getReportingSession() function
function GetReportId(reportName) {
var oDataSetName = "ReportSet";
var columns = "ReportId";
var filter = "Name eq '" + reportName + "'";
retrieveMultiple(oDataSetName, columns, filter, onSuccess);
function retrieveMultiple(odataSetName, select, filter, successCallback) {
var serverUrl = Xrm.Page.context.getServerUrl();
var ODATA_ENDPOINT = "/XRMServices/2011/OrganizationData.svc";
var odataUri = serverUrl + ODATA_ENDPOINT + "/" + odataSetName + "?";
if (select) {
odataUri += "$select=" + select + "&";
if (filter) {
odataUri += "$filter=" + filter;
$.ajax({
type: "GET",
contentType: "application/json; charset=utf-8",
datatype: "json",
url: odataUri,
beforeSend: function (XMLHttpRequest) {
XMLHttpRequest.setRequestHeader("Accept", "application/json");
success: function (data) {
if (successCallback) {
if (data && data.d && data.d.results) {
successCallback(data.d.results);
else if (data && data.d) {
successCallback(data.d);
else {
successCallback(data);
error: function (XmlHttpRequest, errorThrown) {
if (XmlHttpRequest && XmlHttpRequest.responseText) {
alert("Error while retrieval ; Error – " + XmlHttpRequest.responseText);
function onSuccess(data) {
reportId = data[0].ReportId.replace('{', ").replace('}', ");
CreateEmailAttachment(); // Create Email Attachment
//Gets the report contents
function getReportingSession() {
var pth = Xrm.Page.context.getServerUrl() + "/CRMReports/rsviewer/reportviewer.aspx";
var retrieveEntityReq = new XMLHttpRequest();
var Id = Xrm.Page.data.entity.getId();
var quotationGUID = Id.replace('{', ""); //set this to selected quotation GUID
quotationGUID = quotationGUID.replace('}', "");
var reportName = "ABM_Infotech_SalesQuote"; //set this to the report you are trying to download
var reportID = "751089AA-74B8-E211-B52F-D8D3855B253B"; //set this to the guid of the report you are trying to download
var rptPathString = ""; //set this to the CRMF_Filtered parameter
var strParameterXML = "<fetch version='1.0' output-format='xml-platform' mapping='logical' distinct='false'><entity name='quote'><all-attributes /><filter type='and'><condition
attribute='quoteid' operator='eq' uitype='quote' value='" + quotationGUID + "' /> </filter></entity></fetch>";
retrieveEntityReq.open("POST", pth, false);
retrieveEntityReq.setRequestHeader("Accept", "*/*");
retrieveEntityReq.setRequestHeader("Content-Type", "application/x-www-form-urlencoded");
rptPathString = "id=%7B" + reportID + "%7D&uniquename=" + Xrm.Page.context.getOrgUniqueName() + "&iscustomreport=true&reportnameonsrs=&reportName="
+
reportName + "&isScheduledReport=false&p:ABMFilteredQuote=" + strParameterXML;
//remove the part starting from &p:salesorderid if your report has no parameters
retrieveEntityReq.send(rptPathString);
var x = retrieveEntityReq.responseText.indexOf("ReportSession=");
var ret = new Array();
ret[0] = retrieveEntityReq.responseText.substr(x + 14, retrieveEntityReq.responseText.indexOf("&", x) - x - 14); //the session id
x = retrieveEntityReq.responseText.indexOf("ControlID=");
ret[1] = retrieveEntityReq.responseText.substr(x + 10, retrieveEntityReq.responseText.indexOf("&", x) - x - 10); //the control id
return ret;
var bdy = new Array();
var bdyLen = 0;
function concat2Bdy(x) {
bdy[bdyLen] = x;
bdyLen++;
function encodePdf(params) {
bdy = new Array();
bdyLen = 0;
var retrieveEntityReq = new XMLHttpRequest();
var pth = Xrm.Page.context.getServerUrl() + "/Reserved.ReportViewerWebControl.axd?ReportSession=" + params[0] +
"&Culture=1033&CultureOverrides=True&UICulture=1033&UICultureOverrides=True&ReportStack=1&ControlID=" + params[1] +
"&OpType=Export&FileName=Public&ContentDisposition=OnlyHtmlInline&Format=PDF";
retrieveEntityReq.open("GET", pth, false);
retrieveEntityReq.setRequestHeader("Accept", "*/*");
retrieveEntityReq.send();
BinaryToArray(retrieveEntityReq.responseBody);
return encode64(bdy);
var StringMaker = function () {
this.parts = [];
this.length = 0;
this.append = function (s) {
this.parts.push(s);
this.length += s.length;
this.prepend = function (s) {
this.parts.unshift(s);
this.length += s.length;
this.toString = function () {
return this.parts.join('');
var keyStr = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/=";
function encode64(input) {
var output = new StringMaker();
var chr1, chr2, chr3;
var enc1, enc2, enc3, enc4;
var i = 0;
while (i < input.length) {
chr1 = input[i++];
chr2 = input[i++];
chr3 = input[i++];
enc1 = chr1 >> 2;
enc2 = ((chr1 & 3) << 4) | (chr2 >> 4);
enc3 = ((chr2 & 15) << 2) | (chr3 >> 6);
enc4 = chr3 & 63;
if (isNaN(chr2)) {
enc3 = enc4 = 64;
} else if (isNaN(chr3)) {
enc4 = 64;
output.append(keyStr.charAt(enc1) + keyStr.charAt(enc2) + keyStr.charAt(enc3) + keyStr.charAt(enc4));
return output.toString();
</script>
<script type="text/vbscript">
Function BinaryToArray(Binary)
Dim i
ReDim byteArray(LenB(Binary))
For i = 1 To LenB(Binary)
byteArray(i-1) = AscB(MidB(Binary, i, 1))
concat2Bdy(AscB(MidB(Binary, i, 1)))
Next
BinaryToArray = byteArray
End Function
</script>
</head>
<body>
<input type="button" onclick="CreateEmail();" value="Attach Report" />
</body>
</html> -
Online php form (inserts) in pdf form and send via email
So first hello all.
There are 4 PDF Forms amd 4 php forms on a website.
The user should be able to fill out the php form, click on send and the inserts from the user should be stored in the pdf form and send to an email adress.
I know that there are 3rd party tools, the convert it to a image, draw the inserts and convert it back.
But i want to know, how to do it with acrobat itself.
Is there any way to put varaibles in the pdf where php can set (fill)
If this is impossible:
I have heard, that there is a server version from acrobat who can manage this.
The information about this is rarly like i dont understand how much the costs are.
First : price x (for the server software itself)
Second: price y (for every processed document)
Many thanks in advance
IT Technik SchiedtYou cannot use Acrobat on a server in that manner. Acrobat is licensed for one user one system at a time.
You can create and FDF file with the form field data and use that data to fill-in a PDF. You needd to create a unique PDF that could be added to an email and then deleted. You could also accumulate the data in a database. -
I am trying to upload a PDF file and send to the external Mail Id . Mail has been send correctly but at the time of viewing the attachment PDF reader gives the following message
There was an error opening the document . The file is damaged and could not be repaired.
Fbs GUI_UPLOAD is used .
Thanking you in advance
Regards
AjayHi,
look at that weblog
/people/thomas.jung3/blog/2004/09/08/sending-e-mail-from-abap--version-610-and-higher--bcs-interface
Andreas
Maybe you are looking for
-
I think this thing read right before I loaded Yahoo Tool Bar so I could use Yahoo Mail as my default. Since then It hasn't been correct. It did read (4 unread) for a while then for some reason it changed to 6.
-
Need Help to get value from MessageChoice and pass it to another MesgChoice
Hi All, How to get a value from a messageChoice1 in CO into a variable. Once the messageChoice1 is selected i need to pass this variable into a VO whereClause and the page get refreshed, so that another messageChoice2 in the same page will have the v
-
Issue regarding perform on commit statement
Hi, I have a requirement like below. I have a test to see if SAP issues a COMMIT WORK at the end of the datapacket, and allows update tasks to be executed .and check whether the second datapacket succeed in getting the lock, or fail because it has no
-
ANNC: Visit Adobe's Exhibit Booth at WritersUA
Rick Stone (Captiv8r and RoboWizard), Peter Grainge, John Daigle, Matt Sullivan and other forum posters will be at the Adobe Exhibit at WritersUA in Seattle. This is a great chance to learn about the entire Adobe Technical Communication Suite (Captiv
-
How to Reconnect a Forgotten Bluetooth Device on an iPhone 5
I accidentally selected "Forget this device" in Bluetooth setting on my speaker device. I have tried to pair device also reset the network connection but still no able to see the device in the discoverable mode.