Regarding field VBUP-PKSTA (Packing status of an item)

Helo All,
Can anybody tell me from where does the field PKSTA in table VBUP gets populated?
This is regarding packing status of item.
Thanks in advance.

Thanks for your reply.
But when delivery is created, the field is populated from VBUP-PKSTA (Packing status).
My question is how entry is made in this table VBUP?
Is it when we create any master data or during any config?
Thanks.

Similar Messages

  • Packing status and delivery status

    What are the fields for packing status and delivery status?

    Hi,
    Please check tables VBUK (header status) and VBUP (item status).
    VBUK-LFSTK ((Delivery status)
    VBUK-PKSTK (Overall packing status of all items)
    VBUP-LFSTA (Delivery status)
    VBUP-PKSTA (Packing status of item)
    Regards,
    Ferry Lianto

  • Add field VBUP-BESTA to item level of VA03

    Hi All,
    I want to show the field VBUP-BESTA (Confirmation Status of Document Item) to the item overview screen detail level.
    I cannot found it in the detail line configuration, is it necessary to do some Screen Exit or else?
    Please help and tell me the t-code.
    Thanks.
    Terry

    Hi balajia,
    Sorry that I not want these field at all,
    The whole story is:
    The user create SO using VA01, but the ATP check lock the Material number and other user can create SO with same Material, but cannot do the ATP. Therefore the confirmation qty is ZERO, and the status of confirmation is "A".
    The user will not check the warning in VA01 and also VL01n when they create the DN.
    The user cannot see how many lines of item cannot be copied from the SO unless they check the log.
    But the lazy guys will not check and just press save to complete it.
    and the complaint from the Customer come when they receive the billing when some item missing in the Invoice...compare with the SO items they request.
    Therefore, I need to add a checking in the VL01n, prompt the error message and prevent the user from saving the DN.
    Once they see the error message, they need to know how many items the DN missing....
    Therefore, I want to add a Confirmation status field in the item detail level which they can check easily
    (although they can check line by line in the Schedule tab page)
    Can somebody help me?
    Thanks.
    Terry

  • Packing Status at Delivery Header

    We are in the process of creating a form that will include the details of the all delivery items packed on a handling unit. We want the output to be triggered automatically when the delivery has been completely packed.
    We created a requirement to look at the packing status at delivery header level.  There is a packing status field (VBUK-PKSTK) at delivery header level  and packing status (VBUP-PKSTA) at item level.
    We did not expect the delivery header level header to change to "C" until all item were "C".  However, the header level field changes to "C" when the first item on the delivery is packed.  I
    I looked through the SAP Notes to see if there was something there to address this, but could not find anything. 
    I then searched the forums and found a message from 2007 saying that you must configure item categories with "must be packed" in order for this to work. I know we do not want to configure our system that way.  We have many sites and most do not use handling units.
    However, before I have my developer add code to check all statuses at item level prior to triggering an output, I want to make sure this is what has to be done.  And I have not missed a note to correct this.
    Thanks in advance.

    HI,
           Go to transaction "SE16N" and enter table "VBUK" and give the delivery number in the field sales document number. Now you type "&SAP_EDIT" in the transaction bar and execute. Here you can change the status(Total goods movement). And see If you can actually bill the document. Kindly please let me know If you need any more information on this.
    Regards,
    Ram Pedarla

  • Incorrect Delivery Header Packing Status

    Dear Experts,
    We did not expect the delivery header level Packing Status to change to "C" until all item were "C". However, the header level field changes to "C" when the first item on the delivery is packed.
    Delivery Header Packing Status VBUK- KOSTK = C  when the first item of the delivery is packed while there are many itmes to be still packed
    Any valuable input on this will be appreciated.
    Regards,
    Shashidhar

    Hi Shashidar,
    Please check the customizing for item cat. ZELN for example
    > Logistics Execution
    > Shipping
      > Packing
       > Packing Control By Item Category
        > Item cat.ZELN  : ' '  Can be packed        <<<<<
                            A   Must be packed
                            B   Cannot be packed
    Please change to  'A'  (Must be packed) and try again.
    regards,
    Ramana

  • Incorrect packing status

    Hi,
          In the delivery document when i pack 3 line items out of 5, the status at delivery header shows ' C ' and at the items which are packed ie those 3 as  ' C '. indicating completely packed. This is wrong at the header level because another 2 line items are not packed at all. So, it should indicate ' B '- Partially packed at header level.
    Also we have applied as OSS Note to rectify the problem but could not resolve it.
          Please help in this regard. We are on ECC 5.0.
    Thanks in advance.
    Sadhu Kishore

    Hi Sadhu
    I'm not sure if this is still an issue for you as the post is from January. Nevertheless, it appears that the behaviour is related to the packing control setting in the item category definition (transaction 0VLP). If you set ' ' (can be packed) then if some items are packed the header status will be 'C'. If you set the packing control to 'A' (must be packed) and then only pack some items then the delivery header packing status will be 'B'.
    Regards
    Michael

  • Packing status becomes complete after using Pick HU

    Hi Experts,
    We use Pick HU for Outbound to pick products from warehouse to packing work center
    but as soon as we use pick hu in warehouse order for Out delivery and confirm the WO to pack center
    the status of packing becomes complete
    which should be ideally complete after we repack the products in to ship hu
    is there any thing i m missing to accomplish this?
    Regards,
    Roopendra

    Hi  Roopendra
    I hope this is Correct as its belong to task and not activity.
    And if you see activity OB02 then its has to complete at work center. This is about task.
    Pack status on del for picking and not for packing activity.
    Regards
    Suraj

  • Outbound packing status is "Completed" before we pack in work centre

    Hi,
    Once picking is completed (source and destination HU is same) immediately system says "packing completed" , in fact the next step is packing.
    Is it a right behavior in EWM?
    If i use outbound without storage process, how the packing status in ODO would be set as completed without any HU.
    Thanks,
    Ganesan

    Hi Ganesan,
    I believe that the packing status is just dynamically determined based on the HU data in the delivery. The status does not consider the process oriented storage control. Therefor I think the behaviour is right.
    Best regards,
    Christian

  • Pack status misleading

    Dear All
    We have scenario of Pick, Pack Stage and Load where in loose items are picked to  temporary reusable pick HU (Totes) and brought to Pack work center.
    In the Packing station they are packed  as per customer specific packaging , Finally staged and Loaded.
    Issue is  delivery gets the pack status "completed"immediately after the pick confirmation to Pick HU and not based on actual pack completion.
    Is there any way to reflect the packing status after completion of packing in the work center.
    I could have activated the flag " Do not put away HUs" in the Pack  center  storage type but we want to track the pick HU's adn the contents at the pack stations until they are transferred to packing cartons.
    An extension to above question>>
    Unlike the above scenario where the loose items are picked into the pick HU the scenario here is Picking of cartons to pick HU..
    How to handle the requirement of  Pick HU being with the  resource after pick confirmation and the requirement is to just drop the picked cartons at the pack work center.
    regards
    Saravana

    Hi Saravana
    You correctly catch
    WO creation category  makes sense.
    For eg..
    WO creation category if it's pick path then the pack status not completed after picking
    WO creation category if it's pick and Pack then the pack status can have completed status after picking.
    This will work for you for you.
    WO creation category if it's pick path then the pack status not completed after picking.
    Process is just auto WT creation may not happen till it pack. need to check.
    only here is first WT is take hu via pick hu from bin to pack bin.
    wt 2 >>pack and complete pack step.
    wt3 >> create WT for pack to staging and then wt4 load.
    if you need any other help please let me know.
    regards
    Suraj

  • Field for Vendor Invoice status

    Hi guys,
    We have to fetch the vendor invoice status for the given invoice.
    I checked with the table RBKP there the field RBSTAT shows the status, but it shows only status like (PARK, POSTED etc)
    but the requirement is to get the status like (PAID, VOID, OPEN etc).
    I searched through the SDN and SAP, did not found the exact solution.
    Is there is any field for that, or any code sample/ logic any one have..
    Thanks,
    Anmol.

    Clossing the threat,
    tried using BSIK and BSAK used payment block from BSIK.
    If entry exist in BSAK-paid
    if A in payment block - Blocked
    if payment block is initial - invoice only

  • Filter the Regarding field on Activity

    Can we use addCustomFilter method on Regarding control on Activity form? I would like to filter the cases listed under Regarding field based on the role of logged in user. 
    Regards,
    Yogesh

    Please Refer below link :
    http://blogs.msdn.com/b/shraddha_dhingra/archive/2013/12/21/addpresearch-and-addcustomfilter-in-crm-2013.aspx
    http://mscrmshop.blogspot.in/2013/10/addcustomfilter-method-for-lookup.html

  • Which Master data Source is available for the field VBUK-GBSTK (Doc Status)

    Hi
    Which Master data Source (Attr) is available for the field VBUK-GBSTK (Document Status).
    Please help me.
    Thanks
    Mannev.

    Hi
    Thanks for your reply.
    That is Transaction data source. I want master data source.
    Thanks,
    Mannev.

  • Update sales orders status after changing item completion rule

    Hello!
    I've just changed the item completion rule of a given sales document item (from 'B' to blank). But we have several old orders, which have deliveries created with reference, with some fields still open (due to the 'no reference' status at the item level). The orders created after the new condiguration are ok.
    So, is there any way I can update the status of those old orders? Already tried the report SDVBUK00, but did not work out.
    Any ideas are welcome.
    Thanks.
    Adriano Cardoso

    Hi,
    check if oss note 1472007 helps.
    Regards,
    JM

  • Getting status row for item '' activity id '' does not exist

    Hi,
    Need your help.
    Create a custom workflow SAMPRREQ. Its having following processes.
    1. Start Process
    2. Respond Notification.
    3. Function to update Table with the responded value.
    4. End process.
    After lauching the workflow, Notification send to the performer. Open the notification. When approver click the any of the result value (approve, reject, onhold) system giving followign message.
    3101: Status row for item 'SAMPRREQ/20130206161924', activity ID '242956' does not exist.
    I have seen some threads in the forums and bounce the database , purge the item type completly. But, still getting the error.
    Regards/Prasanth

    Sosa,
    When i run the wfstat nothing wrong in the info. unable to find the issue.
    But, i have narrow down the issue. In the function process in my workfow i am calling a custom function called update_approval_status_new.
    In this the value of the respond notification to be updated to a header table of this workflow and insert into events tables.
    When i comment these two dml ( update to header status & insert into events ) there is no error.
    Can any one tells me can i update and insert custom tables in workflow or not. If I want to do this, what is procedure.
    Regards/Prasanth

  • Add ECC Custom Fields in CRM Web UI ERP Order item

    hi all,
    i have to Add ECC Custom Fields in CRM Web UI ERP Order item .
    I have :
    -  add the field on Web UI Screen.
    -  add the field on structure  TDS_item_COMV  and  TDS_item_COMC in ecc
    -  insert record for field on LORD_MAPPING table
    -  implemented badi BADI_LORD_DO_PA BADI_LORD_GET_INPUT_MODE.
    -  implemented method GET_I_S_STRUCT on crm with  :
    CASE COMPONENT.
        WHEN 'ZZSPOND'.
          RV_DISABLED = ABAP_False.
    endcase.
    - on method  do_prepare_output i have change value of fields with code :
    lr_loop = typed_context->erpadmini->collection_wrapper->get_first( ).
    WHILE lr_loop IS BOUND.
    posnr = lr_loop->get_property_as_string( iv_attr_name = 'POSNR' ).
    Does the current item has to be set for "Sponda Idraulica"?
    READ TABLE Z5CL_GSA_TOOL0001=>GT_ITEMS_SPOND INTO ls_spond
                                  WITH KEY posnr = posnr.
    IF sy-subrc = 0.
    lr_loop->set_property_as_string( iv_attr_name = 'ZZSPOND' iv_value = 'X' ).
    DATA : V_X TYPE STRING.
    V_X = lr_loop->get_property_as_string( iv_attr_name = 'ZZSPOND' ).
    ENDIF.
    lr_loop = typed_context->erpadmini->collection_wrapper->get_next( ).
    ENDWHILE.
    I can't change the field  value  because it is "not changeble"  .
    Can you help me ?
    Thanks in advance.

    Hi Celi,
    I have created some fields at header level of ERP Order, and the user is available to change them, replicating the information to SAP ECC (using interface LORD II). 
    All sales item information is treated using RFC ERP_LORD_GET_ITEM_MULTI, available in SAP ECC. 
    Please check the following point:
    If those structures below were expanded with your custom fields:
    SAP CRM:
    CRMST_L2_ITEM_COMV
    CRMST_L2_ITEM_COMC
    CRMTT_ADMINI_ERPIL
    CRMTT_ADMINI_I_ERPIL
    SAP ECC:
    TDS_RFC_ITEM_COMV
    TDS_RFC_ITEM_COMC
    Please check if for your scenario is necessary to implement the enhancement BADI_LORD_DO_PAI method ADD_SUPPLY_LIST. The code below works for header level.
      DATA: ls_supply TYPE tds_field_supply.
      IF iv_object_id EQ 'HEAD'.
        IF iv_module EQ 'VBAK_BEARBEITEN'.
          ls_supply-field = 'ZZCCINS'.
          APPEND ls_supply TO ct_supply.
          ls_supply-field = 'ZZCCNUM'.
          APPEND ls_supply TO ct_supply.
          ls_supply-field = 'ZZCCNAME'.
          APPEND ls_supply TO ct_supply.
          ls_supply-field = 'ZZAUNUM'.
          APPEND ls_supply TO ct_supply.
        ENDIF.
      ENDIF.
    I hope it helps!
    Kind Regards!

Maybe you are looking for