Regarding PCUI Complaint Parameters

Hi Friends
I am not able to find the list of parameters that i can use to pass values from ICWC to any PCUI Application. I know how to pass values but dont have the idea how to search what are the parameter that we can pass to any application.
Ex:- I have to pass the Sold to pary, Organization Details from ICWC to PCUI Complaint Application(CRMD_BUS2000120) so from where i can search the parameters names and if i have to add then what is the way.
Please help me out friends as go live is near.
Regards
Pulkit

Hi Sreelekha
For ICWC parameter passing check this blog it contains a complete example
Re: How to make data of ICWC available in PCUI     
But the problem that i am facing is in the blog they are passing the BP as parameter name 'CRM_OBJECT_ID' but in the trace i did not find any variable with the same name and also tried to debug the application but not able to find the exact location wher and how the BP is passed from ICWC to BP
If you have any idea please let me know in which method of PCUI BP he is retrieving the parameter value.
Regards
Pulkit

Similar Messages

  • Regarding content conversion parameters at receiver side

    Hi
    In the recevier side I have 3 nodes.
    like HEADER,BODY,TRAILER.
    file receiver communication channel I mentioned
    RecordsetStructure*    HEADER,BODY,TRAILER
    parmeters I mentioned
    HEADER.fieldFixedLengths
    HEADER.endSeparator
    BODY.fieldFixedLengths
    BODY.endSeparator
    TRAILER.fieldFixedLenghths
    TRAILER.endSeparator.
    In runtime workbench it is showing "Channel has not been correctly initialized and cannot process messages"
    Please tell me is there any other parameters I have to mention.
    regards
    venkat.

    Venkat,
    Pls refrer the below:
    http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
    Regards,
    Sameer!

  • Regarding configuration of "Parameters for determining the basic dates"

    Hi All,
    Can anyone give inputs in which scenario we need to use the configuration "Parameters for determining the basic dates".
    1)Do we have any restrictions for usage of above IMG configuration, 2) any pre-requisites to use the configuration of "Parameters for determining the basic dates" and 3)does configuration of this task is having any integration with any other modules, if yes what is the point of integration with other modules.
    Thanks in advance.

    Dear Aditya,
    Parameters for determining the basic dates in production order are used to calculate the Basic Start date & End date of Production order. It Determines if and how the basic dates or the dependent requirements dates are adjusted during lead time scheduling. You can customize this in OPU3 for planned order & OPU5 for Production Order.
    There are the following possibilities:
    1.The basic dates are adjusted and the dependent requirements are scheduled for the start dates of the relevant operations.
    2.The basic dates are not adjusted and the dependent requirements are scheduled for the start dates of the relevant operations.
    3.The basic dates are adjusted and the dependent requirements are scheduled for the order basic start date.
    4.The basic dates are not adjusted and the dependent requirements are scheduled for the order basic start date.
    1)Do we have any restrictions for usage of above IMG configuration
    For scheduling this has to be. If you want that start date should be calculated based on Inhouse production time & not on routing select opetion 2 or 4
    2) any pre-requisites to use the configuration of "Parameters for determining the basic dates"
    Not as such
    3)does configuration of this task is having any integration with any other modules
    Not directly but with MM to determine dependent requirement Proposal.
    Regards
    ABhijit Gautam.

  • Issue regarding SAP/GPA parameters

    Issue      :    When Sales Order, Delivary, Transfer Order, Billing is created by one user , and if the same user creates Sales Return Order(VA01) it is working fine. But if any other user creates this Sales Return  then it is not showing Sales Return AMOUNT value which has to be copied from the Billing Dcoument.
                       This Sales Return transaction calling Form Routine which contains code to get Sales Return value . when same user who created  Sales Order, Delivary, Transfer Order, Billing    creates Sales Return then SPA/GPA PARAMETERs used in Form Routine program to get Reference Billing Document no.,etc , are getting populated by values , but if different user creates Sales Return this SAP/GPA PARAMETERS is not getting populated. i.e
    DATA V_VBELN TYPE VBELN.
    GET PARAMETER ID 'VF' FIELD V_VBELN .
    why it is not getting populated plz help

    Hi M Kumar,
    Please note SPA / GPA are user specific, hence if same user creates Sales Return Order values will be copied from previously created document, while it will not be copied for other user.
    Set Parameter : "Writes the contents of the field f to the global user-specific SAP memory and the local transaction-specific SAP memory under the ID pid. "
    Regards,
    Mohaiyuddin

  • Regarding content conversion parameters

    Hi,
        Can anyone send me a blog that completely explains in detail about each and every content conversion parameters?Need complete info about ALL those parameters
    Thanks in Advance

    Hi Rambabu,
    Try to implement scenarios in these weblogs...it cover almost all type of scenarios
    /people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
    /people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
    /people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
    /people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
    /people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
    Also go through this :
    Converting File Content in the Sender Adapter:
    http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/frameset.htm
    Converting File Content in the Receiver Adapter:
    http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
    Thanks,
    Maheshwari.

  • Regarding "File Access Parameters" in Integration Directory

    Hi,
       Suggest me how to provide the source and target directory names if i place the input file in the C- drive of my local system.
        I provided the source directory name in the following way.
           <b>C:/Dinesh/XI/INP</b>
       But IS is not picking the file.

    Hi,
    You need to place the file in a folder that is shared and that can be accesed from your Xi server.
    Share your folder DIINESH and then in your file adapter give the directory as <b>
    IPADDRESS of your machine\Dinesh</b>
    Make sure XI can acces your folder and that ports are open. If not, then use this blog to set up your local desktop as a FTP server,
    /people/shabarish.vijayakumar/blog/2006/08/01/along-came-a-file-adapter-mr-ftp-and-rest-of-the-gang
    Regards,.
    Bhavesh

  • Regarding Including custom parameters in SQ02

    Hi,
    SAP Gurus,
    My requirement is as follows,
    I need to add a custom select parameter in SQ02, I have done it by adding in selections tab in SQ02.
    However I am not able to connect this parameter in data fetching,
    Please suggest,
    Thanks & Regards,
    Pavan

    Hi,
    Please suggest,
    Thanks and regards,
    pavan.

  • A query regarding setting default parameters like locl in a smartform.

    Hello Everybody,
    My query is when I execute a program having a smartform , I need to type locl and then the print preview , now my requirement is when ever i execute a program that has a smartform , program should automatically take the printer as 'locl' and should go to print preview without me having to select the print button. How is that possible .
    Thanks
    Khaleel

    Hello Mr Grover,
    I tried doing as said in that thread  but I could not get it right .Could any one tell me where am i going wrong .
    g_Control_parameters-NO_DIALOG = 'X'.
    g_Control_parameters-PREVIEW = 'X'.
    g_OUTPUT_OPTIONS-TDDEST = 'locl'.
    *-- to suppress the print preview option .
    CALL FUNCTION 'SSF_OPEN'
    EXPORTING
        OUTPUT_OPTIONS           = G_output_options
        CONTROL_PARAMETERS       = g_control_parameters
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
      EXPORTING
         FORMNAME           = 'ZHR_SCR_L03'
      IMPORTING
         FM_NAME            = WF_FNAME
    EXCEPTIONS
       NO_FORM              = 1
       NO_FUNCTION_MODULE   = 2
      OTHERS                = 3
    IF SY-SUBRC <> 0.
    "  MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    "   WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
        CALL FUNCTION WF_FNAME
          TABLES
            INT_SALARY       = INT_SALARY
          EXCEPTIONS
            FORMATTING_ERROR = 1
            INTERNAL_ERROR   = 2
            SEND_ERROR       = 3
            USER_CANCELED    = 4
            OTHERS           = 5.
    " here the sy-subrc is coming as 2 WHY?
    IF SY-SUBRC <> 0.
                "* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                            " *              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-"MSGV4.
    ENDIF.
    CALL FUNCTION 'SSF_CLOSE'
    IF SY-SUBRC <> 0.
    "* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    "*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
      ELSE.
        MESSAGE S082(Z1)."'No salary has been Changed during the selected period' TYPE 'S'.
      ENDIF.
    Thanks
    Message was edited by:
            Khaleel S.Mohammed

  • Regarding initialization parameters

    Hai all,
    Can anybody please help me regarding this initialization parameters like
    1.what is correct value (how to find)
    2. indetail about each parameter
    1._optimizer_mjc_enabled
    2.max_dump_file_size
    3.optimizer_index_caching
    4.optimizer_index_cost_adj
    5.parallel_execution_message_size
    6.parallel_max_servers
    7.parallel_threads_per_cpu
    8.processes
    9.sessions
    10.shared_pool_reserved_size

    Following link would be the best place to get the details about all initialization parameters.
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_2013.htm#i2154767
    As regards to the best value, most of them would be your database specific. Start from oracle defaults for hints and go from there.

  • How does one set databse parameters in Tomcat to run a servlet?

    Hi, I am trying to run a applet-servlet code, downloaded from the web. According to the installation instructions, the following is stated:
    Database Parameters. You can provide different database parameters to the servlet. These parameters are set during the administration of the servlet.
    dbDriver - name of the database driver class name (default = sun.jdbc.odbc.JdbcOdbcDriver)
    dbURL - complete database URL (default = jdbc:odbc:StudentDatabase)
    userid - user id (default = <none>)
    passwd - password (default = <none>)
    I am running TOMCAT on a Windows2000 machine. My question is how to does one set the parameters in TOMCAT. What is the default userid and password for TOMCAT.
    Any help/advise is appreciated in advance. Thanks.Regards.

    May be parameters must be set in web.xml in your war

  • Why is Refresh Sheet not showing me the parameters for report?

    I have a really large amount of data showing up in my report. It is taking forever (times out after 30 minutes) for my data to display. In the past, I have cancelled and then used the refresh sheet to constrict my report parameters and then rerun the report. However, today, after I select cancel, and then Refresh Sheet, the report just kicks off again and times out again without showing me my parameter list and without allowing me to specify my running parameters?
    Why is this happening and how can I get my Refresh Sheet to allow me to specify values for my execution parameters.
    Thanks,
    Cherie Machler

    Hi Cherie,
    Is this problem happening in Viewer?
    If yes, I had a SR open with oracle for this problem. It was recently closed without resolution. It is a problem that they are not willing to fix. My scenario is that I open a report with multiple worksheets that are long running and with multiple input parameters. I run the report with the default parameters. Realize I didn't input the correct thing, so I cancel the report. If I cancel at 3 seconds or less, my session hangs and I have to start a new internet session. If I cancel beyond 13 seconds, the cancel takes me back to the select worksheets screen but only allows me to run the report - no changing of parameters allowed.
    Message I received from Oracle:
    "I have received a response on Bug 5576575 - CANNOT CHANGE THE PARAMETER VALUES AFTER CANCELLING A
    REPORT IN VIEWER and internal enhancement request Bug 6007588 - NEED TO CHANGE THE PARAMETER
    VALUES AFTER CANCELLING A REPORT IN VIEWER.
    The bug applies to 10.1.2.54.25 also. Regarding allowing the parameters to be changed bug 6007588 the
    response " in order to fix this,it would need a change in architecture on how we capture and save state
    information. This is unlikely ".
    It will not be possible at this time to change the parameters when cancelling a query in Viewer."
    NOTE: If you read the bugs, they were logged against versions prior to 10.1.2.54 which means they should also apply to 10.1.2.50.
    Regards,
    Nancy

  • Creating Complaints/Returns from external reference for Billing Documents.

    Hi Experts,
    I have question regarding Creating Complaints/Returns from external reference.
    My requirement is to fetch data for Billing Type, Billing Documents and other related from ECC system and to create Complaints/Returns using the same in Web UI.
    Is there any SPRO configuration as such so that we can pinpoint to the ECC system where it should fetch the data or is there be a custom development involved for the Drop down lists in Web UI?
    I know about the BADI CRM_COPY_BADI_EXTERN which is triggered when creating using reference, but I am not able to see where the method SEARCH_HELP_FOR_EXTERN_DOC or GET_SEARCH_HELP are triggered.
    I have gone through many forums within SDN but not able to find any solution. Please help!
    Regards,
    Mahesh

    Hi Ly,
    I wouldn't be able to share the code with you, but I would ask you to check with the functional counterpart regarding the important fields that are to be copied.
    What I did in my case is, based on the Billing document number passed from CRM in the RFC I hit the tables VBRK and VBRP for header and item data respectively.
    For pricing I passed the relevant fields from KONV table (KSCHL, KWERT, KAWRT etc..)
    For document flow VBFA.
    For partner VBPA.
    I faced issues only with pricing as there were many settings and pricing routine logic differences between CRM and ERP.
    Regards,
    Mahesh

  • A complaint

    How can we reach a email or a way to talk to a manager regarding a complaint or file a complaint on a rep. I have spoke with some reps and I would like to get this resolved but feel like I am being pushed to the side and that someone will eventually call me back. Getting a little frustrated.

    You my friend have fallen for a Verizon trap. You see if you just brought the phone into a verizon wireless corporate store within that 14 day return period you could have exchanged it or got your service cancelled or had the tech look at it. The verizon representatives have strung you along past that time frame so now you either eat the situation or file a complaint with either the Better Business Bureau (http://www.bbb.org) or take the company to small claims court to recoup your losses via that string along. However if there is a record of a desire to have this situation fixed at 2 days into service you may have a good case. Hopefully there is a record but I would not hold my breath. Very sad and shady indeed.

  • Keep in URL parameters shopid and language

    We use B2C ISA 5.0. When we use parameters like ?shopid=XXXXXX&language=en to log into B2C, these parameters disappear from the URL. How can we keep in the URL these parameters for the session in Explorer.
    Regards,

    These initial parameters are used to navigate the application at the start of the program. However, they are not retained in the URL parameter. However, the Shop Id and Language are derivable parameters from objects available in UserSessionData. UserSessionData is an object available in session context and hence can be accessed from any action class or JSP.

  • How to record workcenter standard parameters in PP-general business process

    Hi Experts,
    Can u anyone have any idea to handle parameters such variable  speed of the machine, temperature at which is operated ?....,etc
    Regards,
    Irshad

    Check the parameters available in OP17, if they do not meet your need, then add a custom parameter.
    Then define a forumla for your work center in OP21 using the paramters you defined.
    If you need any further assistance then revert.
    If helpful award points
    Regards,
    Vivek

Maybe you are looking for