REGARDING STO ISSUE

HI GURUS,
                    I HAD CREATED STO BUT THE LINE ITEM IS NOT DISPLAYED IN VL10B SCREEN,I HAD MAINTAINED ALL DETAILS PROPERLY IN STO AND IT IS SAVED BUT NO LINE ITEM IS DISPLAYED IN VL10 B SCREEN .
                     SO PLZ GIVE ME SOME HELPFUL GUIDE LINES
REGARDS
KIRAN

Hi,
Check if the 'shipping' tab is appearing on the line item tab. If not then check the STO settings in config. The assignment of STO doc type ( generally UB), STO delivery type (NL), supplying point and checking rule must be missing. Make the settings following path-MM-Purchasing Docs---Set up STOs.
Check by creating a new doc.
Regards,
Saurabh Diwakar

Similar Messages

  • REgarding licensing issues involvng 'Computername' and the use of UpperCase4 vs Lowercase Letters

    Does any one know if it would cause problems for the Office 365 software license to be displayed as licensed to an ALL CAPS name like 'MY-FAVORITE-PC' but the computer itself shows the computer name to be 'my-favorite-pc"?
    If it does, which one should I change?  A couple of people here have had this same problem (which usually occurs when they change to using a different PC for their account) I have to Deactivate their Old PC namer and then install the licnse to
    their New OC using whatever name it has.
    On more than one system, this has resulted in various odd "failure to contact Microsoft server" issues when activating.  The problem continues for 7 days and then their copy of Office starts showing reed warning bards and eventually gets totally
    unusable.
    However, if I uninstall the office, deactivate the license, and reinstall it once again, it install just fine and acts ok but invariably at some point, the same thing occurs.
    On one of them I noticed the difference in the case of the letters used in the computer name and the license name.  On others I am wondering about various software add ins for Outlook or some other 3rd part application causing the problem.  Whatever
    it is, it gets extremely annoying.  Officer 365 apparently must run an activation sequence almost constantly while Office 2010 (and I presume 2013) ran it once and were done with it.
    Searching Google I have found too many  possible reasons along with a lot of people who have had the same problems but no one seems to have the 100% solution.   This has only started happening since we switched to Office 365 and only
    seems to occur on systems that are changed out to different ones with the same User's 365 Account which is in good standing  and has 5 available licenses of which only one is in use.
    In the case of the caps vs lowercase I also wonder if changing the name to CAPS on their PC would create additional problems on its own?

    Hi Questorfla,
    For the Office 365 software license issue, I recommend you can post in dedicated Office 365 Forum to get a better response:
    http://community.office365.com/en-us/f/148.aspx
    If there is anything else regarding this issue, please feel free to post back.
    Best Regards,
    Anna Wang

  • Regarding Consignment Issue

    Hi Friends,
             I have a question regarding consignment issue. During the consignment fill up I have entered a material (machine) that is configurable and also assigned a serial number to it. Now when I try to create an order (consignment issue) and enter the corresponding serial number tied up to the machine in Consignment fillup, the system is taking just the higher level item of the BOM. The BOM is not getting exploded in the order. Can anyone please suggest where I can control. Any help is greatly appreciated. Thanks in advance.
    Sunny.

    Hi
    I don't think it will b exploded in Consignment Issue as it has already exploded in Consignment fill up. Consignment issue means what selling the stock which is at consignee's place so it dose not have to b exploded. u carr on like that and see what is the flow if it is ok then go on otherwise u let me know the problem.
    Thanks
    Mastan

  • Regarding Performance Issue in MI Application

    Hii All,
    We have made a SmartSync MI Application.Everything thing is working fine.But the scenario is this that when we try to navigate through the application from one page to another ,for example if i click on one link to get details corresponding to that link(i.e) we are retreiving the data from the local database, but this is taking a lot of time and according to our buisness need we have to reduce this time to fetch the data.
    Can anyone help me regarding this issue what can be done either in coding part, what parameters & standards to follow to improve the performance.
    Thanks,
    Devendra Phate

    hello deven,
    if you are only focusing on your application's performance
    on the aspect of usability i.e. less waiting time, fast
    response UI, i would personally suggest you to use AJAX.
    put some processing part on the browser side and making
    data retrieval from MI asynchronous... this way, your user
    don't have to wait for all data to be presented, but rather
    could work on the data presented in pieces (i.e. asynchronously).
    anyway try googling for AJAX...
    regards
    jo

  • My station is listed on Itunes Radio stations, but there's a problem with the connection. Does any body help us regarding this issue? The station name is KRAL FM under the Top 40 / Pop category

    My station is listed on Itunes Radio stations, but there's a problem with the connection. Does any body help us regarding this issue? The station name is KRAL FM under the Top 40 / Pop category

    My station is listed on Itunes Radio stations, but there's a problem with the connection. Does any body help us regarding this issue? The station name is KRAL FM under the Top 40 / Pop category

  • My iphone plus is bending, what does Apple offer regarding this issue?   I am trying to get to contact with Apple Customer Care, but not clear to me how to do it beside this channel of communication. I bought the phone from kosovar carrier which is u

    My iphone plus is bending, what does Apple offer regarding this issue?
    I am trying to get to contact with Apple Customer Care, but not clear to me how to do it beside this channel of communication. I bought the phone from kosovar carrier which is under Slovenian ownership. This means that the original warranty comes from Slovenia, bit complicated but still I would like to get an urgent answer how to proceed with this issue, thanks

    Maybe i should have only asked if anyone is aware on apple's policy
    regarding bending. I took the point that this seems not a proper forum to
    pose Q's to apple thanks to both
    On Wednesday, November 5, 2014, Apple Support Communities Updates <

  • I just want to know if you could help me regarding my issue purchase Adobe Photoshop at Aps store unable to proceed the order due to forgot the answer for the 2 questions.

    I just want to know if you could help me regarding my issue purchase Adobe Photoshop at Aps store unable to proceed the order due to forgot the answer for the 2 questions.
    I dont know how to check my particulars during filling up my registration in apple store support.
    Hope u could give us advice. Thanks...
    CandidoSG
    <Edited by Host>

    Apple ID security issues -
    Call Apple Care and ask for the Account Security Team. They can assist you with your issue.
    http://support.apple.com/kb/HT5699

  • Critical intercompany STO issue

    Hello Together,
    We are facing a strange issue in Intercompany STO process. Supplying plant has done the goods issue ( movt type 643 ) against STO order and sent us the delivery document.
    Accordingly we have changed the Import STO Po & manintained the BCD, CVD & other duty in PO. With refect to PO we did the custom MIRO for Intercompany STO PO.
    But when i try to do goods receipt against outbond delivery then system ask me to put the MIRO no . When i put the MIRO no then the excise values should be come by defalut but
    in my case the excise values are not comming by default.
    The defalut excise values are coming by defalut in case of normal import PO ( not STO ) when i try to do the goods receipt against PO & not against outbond delivery.
    Why it is so ? Could u please help us.
    We are working in SAP 4.7 version and just 2 weeks back we have updated Patch level 35 ( support package SAPKH47035).
    Thanks in advance

    Hi,
    Did you change the PO after doing the PGI and delivery ? If it so try keeping the CVD values before doing the Delivery.
    Regards,

  • Return STO issue

    HI experts,
                   I was trying to configure a return STO scenario.
    I did the following :.
    1. IMG -- MM
    -- Purchasing -- Purchase Order -- Returns Order -- Store Return
    For supplying plant Deliv doc type NCR was maintained.
    2. Created STO with 'Returns indicator ' checked on the item level.
    Now my issue is when try to save the PO I get the error :
    'Not possible to determine shipping data for material'
    (Also on the shipping tab on the item level there is no shipping point populated ,no shipping condition or loading grp.) The shipping point determination for supplying plant is maintained. Also the supplying plant is in the sales org of the receiving plant.
    3. When I use VL10B no STO is selected.
    Did anyone encounter this issue ?
    Kindly advise
    Thanks !

    Hi,
    For the error you are getting 'Not possible to determine shipping data for material'
    DO the following setting
    IMG --> Logistics Execution -->Basic shipping functions -->shipping point & goods Receiving point Determination -->Assign shipping points
    here for the combination of SC(shipping condition) + Loading Group + Plant , you should mainatin Partner shipping point(PrShp)
    Do this and try the whole exercise again.Award points if you are satisfied with solution.
    Regards
    Ganesh

  • Inter company STO issuing from Project Stock

    Hello Experts,
    In my Scenario, I have two plants A & B which are in two different company codes
    Plant A raises an STO to receive materials from Plant B.
    Plant A will receive the materials into unrestricted use stock, but Plant B should issue from valuated project stock (via outbound delivery).
    This is necessary to keep accurate cost tracking.  If Plant B moved the project stock to unrestricted stock first, then the moving average price could be affected before transferring to plant A.
    Can anyone tell me if this is possible?  I don't see stock type Q available for movement 643.
    Does anyone have any other options to for intercompany transfer of project stock?
    Regards,
    Thomas

    I opened a message with OSS and below is the response.  Basically it cannot be done with the standard system.  There is a note on how to modify your system, but it is only for a certain releases and would be considered a core mod.
    "Dear customer,
    Thank you very much for contacting SAP Global Support Center.
    unfortunately the functionality you expect does not exist within the
    standard SAP design.
    note 92231 deal with a modification suggestion how to create such
    movement types in some releases. As this is a modification note
    originally proposed for special customers, there is no general
    modification for all releases. As the tables has changed
    in 46B, the modifications to create 643Q proposed by SAP via the
    corresponding notes are not made for your release. We do as well not
    plan to provide a new modification note at the moment.
    The creation of the movement type is therefore possible but is
    considered a modification to the system design."
    I am sorry that I could not provide you with a more positive answer
    this time but nevertheless can provide an accurate information. For
    more information, please refer to note 11 and 83020.
    Please notice that the reason for your request does not indicate any
    possible errors in the SAP Software. Nevertheless we have at our
    discretion decided to process your request within the framework of our
    support. Please note that you are not entitled to free consultation in
    similar future cases. In this case check the "The SAP Eco-System
    in a nutshell" that explains how to find help to overcome this issue.
    The document can be found at:
    http://service.sap.com/~sapdownload/011000358700006245642006E/
    Note 1054121.
    I am sorry but this is the standard system design. Please confirm your
    message at your earliest convenience.
    In the end, my client has decided to transfer the project stock to unrestricted stock before doing the STO.  Please be aware that this could affect moving average price before doing the transfer.

  • STO issue. Shortage in good receipts then what ordered?

    Created a STO that has 16 articles. In one article ORDERED item is 4.
    Created the delivery and our delivery goes to PKMS (warehouse) system and sends HU unit. Then we PGI it through VL02n. Then we received it through custom transaction Zb0A
    For that article it created two handling unit
    u2022     One is for 3 article
    u2022     One is for 1 article
    PO history shows that we only received 2 items. It shows two article docs one for each. We suppose to receive 4 items. Checked mseg table it shows that we received 4
    u2022     Good receipt: 2 items
    o           WE     101     4000143084     1 items
    o           WE     101     4000137589     1 items     
    u2022     Invoice receipts: 4 items
    u2022     Good issued:   4 items
    u2022     Created two delivery doc
    o         80014408:  4 items
    o         80007382:  0 items

    Hi Khapre,
    Seems you are using Mvt Type 647 for your STO which will not post the PGI stock in transit. You should user 641 to avoide postings for GR.
    Refer this link
    http://help.sap.com/saphelp_40b/helpdata/ru/fc/6cec6eb435d1118b3f0060b03ca329/content.htm
    http://help.sap.com/saphelp_470/helpdata/en/7f/2540fcbee811d4b579006094b9b9dd/content.htm
    STO
    Hope it helps
    Regards
    Shiva

  • STO Issuing Storage location

    HI
       We use STO process to transfer goods between two plants in same company code
    we are in *4.7 Version *
    Our requirement is to have an option to enter issuing storage location or have the BADI defualt the Sloc from a Z Table
    Thanks
    Kumar

    Hi,
    Why do you need to source it from Z* table? Is standard OVL3 transaction not suitable for you?
    Regards,
    Dominik Modrzejewski

  • STO Issue,Intra company

    Hi,
    We have created one document for plant to plant STO within same company code.Here we have two separate profit center for two plant.When I will do PGI inventory account entry is generated  and value is moving from one profit center to another but problem is that customer has not done MIGO of same document.
    So customer is asking if we will not receive good in receiving plant then profit center of receiving should not be update because it reflect in balance sheet of receiving plant and they can not maintain balance.
    Please suggest,Even account entry will not be generating but profit center of receiving plant should not be update without MIGO.
    Edited by: KHAPREVIPIN on Dec 2, 2011 1:55 AM

    Hi Khapre,
    Seems you are using Mvt Type 647 for your STO which will not post the PGI stock in transit. You should user 641 to avoide postings for GR.
    Refer this link
    http://help.sap.com/saphelp_40b/helpdata/ru/fc/6cec6eb435d1118b3f0060b03ca329/content.htm
    http://help.sap.com/saphelp_470/helpdata/en/7f/2540fcbee811d4b579006094b9b9dd/content.htm
    STO
    Hope it helps
    Regards
    Shiva

  • Regarding goods issue

    Dear GUrus,
    I am issuing raw material against a production order.
    the BOM for the finished material is
    to produce one qty of FG 30 KG of raw material is required
    and the raw material available in my store is only 10KG. and it still allows me to issue that 10kg of raw material against that production order.(I am doing this with movement type 261)
    Where as the requirement from my user is that the system should issue an error msg that there is deficit of raw material quantity.
    Please look into the matter adn throw some light as to how do i set this in the system.
    Thanks

    Hi Anand,
    Check with your user, if they are OK with this -
    Release of Production order is possible only if all components exist i.e. full qty. If they are OK with that, then go to OPJK for the plant - order type - business function (2) combination set Release Material indicator to 3.
    This will prevent the order being released due to shortage of component qty.
    Hope the above is helpful.
    Regards,
    Vivek

  • Regarding goods issue (reversal) against process order

    Dear friends,
    Recently i have noticed one strange thing in SAP.I have created one process order and against it i have done the confirmation.Now when i go to Transaction code mb1a and select movement type 262 (Goods Issue to process order-reversal) and give the storage location and in next screen i gave order number,material code and its qty.These material code is not maintained in the bom of order header material.And even in process order in material tab we haven't maintained this material.Also while doing the confirmation in goods movement we haven't maintained this material.Then also system allows me to do so.Which means material which i haven't issued against the process order, system is allowing me to do its reversal i.e (262).because of which system is creating the stock for that material, which is not correct.
    Can we control this behaviour of system.
    Thanking you guys in advance.

    Hi Jitendra,
    This is fact and there is no standard Control available for the same.Only thing you can do is put control over Movement type 262 or try it by implementing User Exit.
    I am not sure but you can use Enhancement CCOWB001 - Customer exit for modifying menu entries.
    Include is LXCOWBF01.
    Regards,
    Dhaval

Maybe you are looking for