Regarding Super User

Hi
I have given three Super User. Right now i want to give some restrictions to one user , How to do It, Generally if we have given user as super user then we can't do it anything what to do.
For Ex: PLd cration d Changes Restrictions.
Regards
Giri Venkat

Dear Giri,
In order to resolve the issue, log in as one of the superuser :
1. Go to administration --> Setup --> User --> Select the user and uncheck the Super user option.
2. Then assign the necessary authorization to this user, under Administraion --> System Initialization > Authorization> General authorization.
Note : For a Super user, the system will apply full authorization to all module, also you will not be able to edit the authorization
          for a Superuser. This is the system definition.
Regards,
Rakesh Pati
SAP Business One Forum Team

Similar Messages

  • Not able to access the module from user level i.e., other than Super user.

    Hello Friends,
    I created company with super user and normal user, for a normal user gave the rights of sales. When logged in with normal user try to create sales order i am experiencing following system message "To generate this document, first define the numbering series in Administration module [Message 131-3]".
    Could you please advise me in this regard.
    Thanks,
    Rayudu

    Hi,
    Please check the following thread which is being discussed:
    Re: "Define the numbering series in Admin module"
    For the issue you have reported, kindly refer Note 1057873, which will resolve your issue.
    Note says:-
    Symptom
    When trying to open a document a user gets the system message:
    'To Generate this document, first define the numbering series in the Administration module'
    Other terms
    Authorizations, Document Numbering, Series, access
    Reason and Prerequisites
    SAP Business One Functionality, Consulting
    Solution
    A document numbering series have been defined and the user have authorisation to the document type in:
    Administration -> System Initialisation -> General Authorisations -> Sales-AR/Purchasing-AP
    All document numbering series are also given a Group.
    Administration -> System Initialisation -> Document Numbering
    Double click to the left of the row to view the existing numbering
    series for the document type. The field 'Group' is here. By default this value is 1.
    For the Groups there is a separate authorisation.
    Administration -> System Initialisation -> Authorisations -> General Authorisations -> Administration -> System Initialisation -> Series
    After expanding the 'Series', give the user authorisation to the
    Serie/Group that is defined for the document numbering serie it is trying to open.
    Also, check for more similar threads in the forum which could help you.
    Regards,
    Jitin

  • Authorization for super user

    I want to create a super user on the production server who can create and save the queries only (no other authorization). He can save queries only under $TMP.
    For that I have already created role for super user in the transaction PFCG and in business content S_RS_COMP and S_RS_COMP1 I have given all authorization.
    Now User is able to create the query, but when He is going to save it the Error message is coming- 'No authorization for create and change'.
    Please suggest what I am missing.
    Regards,
    Dheeraj

    Hi Dheeraj,
    Have you given auth as per http://help.sap.com/saphelp_nw04/helpdata/en/41/05453caff4f703e10000000a114084/content.htm : Analyst3?

  • Non-Super User Authorization

    Dear expert,
      SBO only allow super user to modify the authorization.  Is there any solution for non-super user to change the authorization setting.
    Regards,
    Kit

    Kit,
    Login as SuperUser,
    1. Go to Administration>System Initialization>Authorization-->General Authorization.
    2. Select your User -->In the right hand side window select "No user Authorizations" at the end of the window -->Give full authorization.
    Let me know if this works.
    Thanks
    Krishna
    Message was edited by:
            Krishna Kishor Kammaje

  • Purchasing Super User not able to quiry Requisition

    Hi
    Can someone please assist me on these,why wouldn't the Purchasing Super User not be able to quiry some Requisition,....do we need to set them up as buyers?
    I get these FRM-40212: Invalid value for field REQ_NUM
    thanks
    Edited by: user12198087 on Dec 9, 2009 12:20 AM

    Hi,
    Any employee of an organization can raise a requisition, not necessarily that he should be defined as a buyer... To access requisition form in APPS, you need to be defined as an employee, not as a buyer. Please correct me if I am wrong here.
    Did you check if any menu or function has been dropped from the responsibility? Do check what's the main menu attached (like Menu : Purchasing SuperUser GUI) to you PO responsibility. and all appropriate sub-menus of requisitions are attached to it.
    e.g. Purchasing SuperUser GUI (Main Menu) ---> Requisitions: (Sub Menu) --> Requisitions Summary: Subfunctions, function : Requisition Summary
    Regards,
    S.P DASH

  • CR Add-on 2.0.0.7 Problem: Only Super Users are allowed access ...

    Hi Everybody,
    We have installed the latest ( to my best understanding) version of CR Add-on (2.0.0.7 , compiled for 64 bit , downloaded from Richard Duffy's blog) and we are receiving the error message "Only Super Users are allowed access to this function" .
    We've checked that the users are all Super Users and they have Professional and Addon licenses.
    The only relevant thread I've found in forums solved the issue by installing the latest version of CR Add-on, which we've did.
    The installation is  B1 2007 A SP001 ,PL 11.
    Any ideas will be highly welcomed.
    Thanks in advance,
    Simon

    We have the same issue, this happens when you go to Administration > Crystal Reports
    We can't see the reports in CR
    Please if you have a solution tell me.
    Thx and Regards,

  • BW Super user training strategy

    Where can I find a training strategy document for BW super users?
    I have the actual content of what the navigation training should be, but I am looking for a strategy or agenda document which lists out the steps to not just identify the superusers but also chart out what the training schedule is like and what steps need to be followed to perform a comprehensive training of super users.
    All thoughts appreciated!

    What about this:
    http://www.sap.com/services/education/certtraining/globaltabbedcourse.epx?context=[[|TERP11|||||]]|
    As per my understanding there is no proper course for super users etc. They are simply end users who become super users by learning BI/BW by their efforts and has interest in learning something new!
    Regards
    aman

  • Super users able to approve but not receive the alerts.

    Hello,
    When our customer logs into SAP Business One they get loads of alerts regarding approvals as they are in the approval list.
    The customer was asking, if they remove themselves from the list of approvals so that they do not get the alerts. As a super user could they still be able to go into approvals to approve. The user was a super user.
    This was tested, the result of which showed that if they were to take off their approvals they would not get the message but also they would not be able to approve either.
    The customer suggested that this would be a useful addition to SAP if super users could go in to approve but not get all the alerts related to approvals.
    Regards,
    Andy

    Hi,
    Account to your description, one your test Exchange account
    with POP mode cannot receive emails. If I misunderstand your meaning, please feel free to let me know.
    If yes, I’d like to confirm if the issue happens internally or externally. And I also recommend the following troubleshooting:
    Check if it can receive emails when you configure the account without POP or IMAP mode.\
    Restart your IIS.
    Check if the issue happens on others.
    Thanks,
    Angela Shi
    TechNet Community Support

  • Difference Between A Support User and Super User in CRM

    Hi All,
    May I know what is the difference between a support user and a super user in CRM?
    Please advice, thank

    HI Plaban
    not sure if you answered your own question here?
    Change User - by itself would allow update of address data, user parameters, defaults, etc
    Assign Object - as you mentioned roles and profiles.
    However, if assigning, I think you need to have both actions: change and assign
    I recall (ages ago) that change was only the user details and not the role or profiles. As a result, there were a few threads where people had to update the action for the request type of provisioning would not occur.
    This is something you could test
    Regards
    Colleen

  • How to Change Maintenance Work Order Report in EAM Maintenance Super User

    Hi,
    We like to change or create new costom report in place of Standrd EAM Maintenance work order details report in Maintenance super User Responsibility.
    When we go Maintenance Super User > Work Order > Print work order >Layout , In Template layout we find only one LOV called Maintenance report.
    We like to where this this Template LOV storing and Run button code where it's storing
    THANKS,
    Gana

    Hi,
    You could temporarly adjust the CUNI definition for TST so that it can be converted to seconds. Adjust the notifications to set a valid unit of measure.
    The alternative would be to update the field MAUEH in table QMIH with a valid breakdown unit of measure.
    -Paul

  • Super User of the Month

    Hi Everyone,
    The Nokia Support Discussion’s team is very appreciative of the active participation of our members and recognizes the value being provided on a regular basis.
    Last September, we started identifying some of the top contributors in the forum and sent out appreciation messages to our most active members.
    Since then, the team has been monitoring the activities of users on a monthly basis to identify the contribution each individual has provided to the forum. Whether you’re a newbie or a veteran, it doesn’t matter. What matters to us is that you’re here helping other users to address their questions concerning a Nokia device or service.
    If you’re asking how you can become a super user, all you have to do is engage and provide assistance to other users on a regular basis. The more kudos received and answers accepted as solutions, the faster it is for you to climb up the ladder and become a super user.
    In addition, you may also be recognized for your contribution by being highlighted in our News and Announcements board and possibly be featured in a Nokia Conversations article!
    Get Engaged and Become a Super User! Best of luck and enjoy!

    Will it be "Super Employee of the Month"?    

  • How to disable the Super User menu - (Right click windows icon menu) - Server 2012 R2 - RDS

    Greetings all,
    Can anyone please advise how to remove the Administrator / Super User menu that appears when you right click the Windows Icon (old start button) in Server 2012 R2 - for RDS users. I have searched and been able to disable access to each of these menu items (Control
    Panel, Event Viewer, Run, etc). But I am searching for a way to completely remove the menu. This menu also appears when you use Win-X shortcut.
    Hope someone can help.
    Terry

    Hi Terry,
    You can try following points, might helpful in your case. Go to 
    C:\Users\Default\AppData\Local\Microsoft\Windows 
    there you will see file called WinX 
    Right click this file and copy then go to
    C:\Users\YOUR_USERNAME\AppData\Local\Microsoft\Windows 
    then paste the file into the folder.
    NOTE: replace YOUR_USERNAME with your actual username. 
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • HT201303 Has anyone experienced being a victim of GNU Emacs Api Emulations hacking thru URL's - Feeds - Email - Redirect - Data Scrabling and more? We are unable to stop them because they are super users. They come back and do more damage. Help Please.

    We have been compromised within our businesses from an empolyee that was terminated with GNU Emac Api enulation program that has infiltrated all of our brand new Apple Computers. We made a decision to move to Mac's this year because of all our businesses being internet based and we are in several different platforms that require many different passcodes, email address, bank accounts, etc. It is not one seamless system that would address one email, password, bank account, etc.
    Eacy time we change one segment of our business unit to move to the next one to fix, we go back to check the previous one that we changed and they have already been in the accounts and changed them so that we have to redo them.
    The information is so broad and wide that the only way I know to ask this first questions - has anyone had this happen to them? We have seeked many avenues with law, experts, reformating our 2 momth old systems 2-3 times each and start over. They are the super users of this program and we can not get them out by changing passwords, accounts, etc. They have everything we do and make sure they keep changing it as we work on the next segment. They have cost our small business thousands of dollars already.
    I am a victim of something that even the local forenic authority is stumped because they don't know where to start. We are not a banking instutition or 100 million dollar company to get the help we need. We don't want to find hackers like they have done to us, we want to get them stopped and get us back on track to start getting our businesses rebuilt.
    Lots of stuff, but WE ARE BEGGING for HELP.
    Apple Support today spent 3 hours with us on the phone and our suppot representative was awesome, but they also said it was big and we need to reach out to the Apple community to see if they heard of anything like this crime. They are in the URL's, RSS Feeds and ghosting everything we do.
    I was told by our local Mac support that this was done by someone that was highly sophicated and they did not know many people that could do this type of damage. I can't image that someone in the Apple community would not know of someone that can assist. The one security company we contacted was around $25,000 to fix this aweful crime.
    We just want them stopped and put in jail so we can go back to business before it destoys us completely.  They even installed emacs on all of our Iphone and androids. WE are being taped, video recorded and eery key stroke is recored. They are only taking us down in middle America.
    Anyone have any ideas? Thank you.

    Hi AP_In_Surbiton,
    I am really sorry that you have had so much trouble getting your Caller ID up and going.  I'll be happy to help you out with this and get it working for you.
    Could you drop me in an email please? Use the 'contact us' form in my forum profile under the 'about me' section. You can find it by clicking on my username.
    Thx
    Craig
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
    td-p/30">Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • How to Track which Super user change the License Administration

    Hi Experts,
    My client recently encounter the License was allocated from a particular user id by an super user, resulting the end user unable to perform transaction when log onto SAP B1 8.8 PL19.
    Is there any way which we can trace and control which super user edit the License Administration and allocated the license to other user?
    Thanks in advance.
    Cheers'
    Vincent

    Hi Vincent,
    1. Login through manager then Go To Administrator--> System Initialization--> Authorization--> Additional Authorization Creator
    2. Additional Authorization Creator screen appear.
    3. Select any content on right side screen and click on Add Same Level button
    4. Authorization ID : Give any Name
    5. Name : Give any Name
    6. Option : Full/None
    7. Forms ID : Click on Edit Button --> Enter ID for License Administrator 60070.
    8. Click Update and Ok.
    9. Go To Authorization--> General Authorizations--> Select User in which you have block Graph--> User Authorization
    here select No Authorization.
    Just untick supper user check box of other user and give rights
    Thanks,
    Srujal Patel

  • Unable to Navigate Organization in "Maintenance Super User" Responsibility (Eam Self Service Pages)

    Dear friends,
    Iam learning Oracle EAM module, now i had a problem that i couldn't able to find EM1 Organziation in the LOV, though i have done Organziation access also, based on the Oracle support.
    Solution from Oracle Support
    ======================
    Unable to Navigate in 'Maintenance Super User' Responsibility (EAM Self Service pages) (Doc ID 1053400.1)
    If you have the Organizations LOV empty, then you need to go to (Navigation) -Inventory (responsibility) > Setup > Organizations > Organizations  Access. Here you need to define a new line for each organization you want to access from the EAM SS responsibility.
    Kindly respond on this issue.
    Thanks
    Shruthi

    Try to compare the menu that you have created with Functional Administartor menu structure. It may help to debug your problem.
    Thanks,
    Mitiksha

Maybe you are looking for