Rejection Workitem/Notification for SC in BRF Workflow

Hi Gurus,
SRM 7.0
I have successfully defined a custom 3 level approval for Shopping Cart. However I do not see a workitem nor an SAP inbox notification back to the creator when the SC is rejected. Recipients of notification are defined in IMG (
Business Workflow > Process-Controlled Workflow > Business Process Configuration > Define Recipient of Notifications).
It is the same when I activate the standard one step approval schema as well. What am I missing here?
Thanks,
RM.

Hi..
             If you use the decision type "Entire document" in the process level and not check the "Work item to Requester at Process End" check box in the approval overview , then system won't send the workitem back to Requester for accept / change.. In order to send the workitem back to requester.. the easy way is to maintain the Acceptance by Contact person in Process level confi.. You have to create a custom event the should check the expression "0V_WF_CURRENT_DECISI" = "REJECTED". use the task id "40007994".. hope this will resolve your issue..
Regards,
Saravanan

Similar Messages

  • 2  questions on BRF workflow for SC

    Hello All
    I have 2 questions on BRF workflow as follows:
    1) My requirement is that the PO be created only after all the items in the Shopping cart (from all decision sets) are approved by separate agents. How do I enforce this using BRF ?The closest is  Decision Type 3: Overall Decision for Partial Document (.The decision applies to the entire decision set)
    2) IS it possible to send an approval work item to multiple agents ( Based on a role or custom attribute) and then the work item could be approved by any one of those agents which completes the workflow & deletes all other work items ?
    Thanks
    Kedar
    Edited by: Kedar Ghayal on Jan 4, 2011 10:53 PM
    Edited by: Kedar Ghayal on Jan 5, 2011 12:06 AM

    Hi,
      1) My requirement is that the PO be created only after all the items in the Shopping cart (from all decision sets) are approved by separate agents. How do I enforce this using BRF ?The closest is Decision Type 3: Overall Decision for Partial Document (.The decision applies to the entire decision set)
         PO can only be created only if all approver's approve the SC.  it will be great if you give more details about the requirement.
    2) IS it possible to send an approval work item to multiple agents ( Based on a role or custom attribute) and then the work item could be approved by any one of those agents which completes the workflow & deletes all other work items ?
      Yes - a workitem could be sent to multiple approver's for a decision set, once any one of the appprover approve the SC, the workitem will be deleted automatically from rest of approver's UWL..
    Saravanan

  • Extended Notifications for SAP Business Workflow

    Hi expert,
    i need your help!!
    i have configured the "Extended Notifications for SAP Business Workflow" with the tnx SWNADMIN and this was successful. I can write emails, but i can read this only on SAP GUI with the tnx SOST. I don't receive email on my email-address.
    can you say me, where is the problem?
    Thank you in advance
    marcel

    Hi Marcel
    Rope in your Basis Guy!
    Basically, your Extended notif part is working fine..... emails reaching SOST is proof. Going out of SAP may need basis config.
    What do you see, a yellow triangle or a red light in SOST?
    Regards,
    Modak

  • SRM 7.0 EHP1 - new functions for BRF workflows

    Hi all,
    We currently upgraded our SRM 5.0 system to SRM 7.0.
    We need some inputs whether to activate the EHP1 for SRM 7.0
    Are there any limitations in terms of BRF workflows which are now covered in SRM 7.0 EHP1?
    In SRM 5.0,we were using n step header level approval workflow using the BADI and custom tables for approval determination.
    We need to map the same in SRM 7.0 now but wanted to know the limitations in terms of any new functionalituies which can be used in terms of Shoppign cart workflow in SRM 7 EHP1 v/s SRM 7.0 SP10.
    I read in one of the posts in the forum that parallel processing for BRF workflows is not supported in SRM 7.0 EHP1.Please advise.
    Please advise.

    Thanks Saravanan.
    We are having lot of issues with the ACW in SRM 5.0 and hence plan to reimplement the workflow in SRM 7.0 using the process controlled workflows plus the new features introduced for workflow.
    Can you please advise if ACW are better than PCW or vice-versa??
    I dnt have the link for the post but cans someone confirm if parallel processing is supported in SRM 7.0 EHP1 workflows??
    Are there any shortcomings in terms of the BRF workflows in SRM 7.0 EHP1?

  • Extended Notification for UWL + Change the description of task/workitem

    Hi,
    I have implemented the Extended notification for UWL and I am getting the emails in outlook. Now the requirement is to customize the body of the email completely for the task '12300096'.
    I have tried going to PFTC->Description but it does not have full text which I am getting in the email. I tried SE63 also. But in the email I am getting
    The following work item requires processing in your SAP Workflow inbox in system xxx.
    <Task description>
    Log on to this system and process the work item.
    If you have problems logging on to the system, contact your system administrator.
    Now I want to remove the following lines;
    The following work item requires processing in your SAP Workflow inbox in system xxx.
    Log on to this system and process the work item.
    If you have problems logging on to the system, contact your system administrator.
    I don't find from where it's coming - please let me know how to remove these lines so that I can add my text in SE63.
    Thanks,

    Hi,
    Go to SWNCONFIG -> General settings.
    There you have TEXT_GOTO_INBOX - DTSWN_MSG_GOTO_INBOX. (I am not sure if this was the correct one, but you should check all the texts in general settings, if this was not the correct one.)
    Now open dialog text SWN_MSG_GOTO_INBOX in SE61 (you see that you need to remove the prefix DT from the name). Here is your text. You can make your own Z-version of a dialog text in SE61, and then use that in SWNCONFIG general settings.
    Regards,
    Karri

  • Email Notification for Forwarded Workflow task

    Hi all,
    Is there a way to trigger an email notification for a Forwarded Workflow task?
    That is when we forward a task from my SAP inbox to another SAP user's inbox by clicking on the fwd button, there is no email notification generated to the user notifying that a task has been forwarded to him/her? We have to manually send an email to the person notifying that I have fwded a task in his inbox.
    Maybe something in SWNCONFIG...
    But what?? not sure... We currently use RSWUWFML2 ...
    Thanks
    Abhi

    Hi Mike
    Thanks for the quick Reply.
    Have been lookking at SWNCONFIG and not sure how to accomplish it...
    Do we have to add a new parameter on the general settings tab ? Is there a SAP delivered Parameter (setting) with a value??
    Any input would be highly appreciated to point us in the right direction?
    Thanks
    Abhi

  • To stop email notification for a user regarding PR release in workflow

    Hi All,
    I am new to workflow.
    I need to stop an email notification for a user who receives it for PR release.
    I checked earlier posts which stated some send email steps in workflow and extended notifications.
    But I am not aware of any of this things.
    Can you all please help me in resolving this? As i hardly know anything about workflow.
    How can i check where this email notification gets triggered or from where it picks the user id?
    Your help would be appreciated.
    Thanks.

    Hi Dharmin
    Identify which workflow is for PR:
    Go to T Code SWI2_FREQ
    Select the appropriate date range
    Work item Type should be (Sub-)Workflow
    Execute
    You will get the list of ALL workflows triggered during the given time interval
    Hopefully, the developers in your system have maintained the correct Work item text and you can identify the PR workflow . Pick the WSxxxxxxxx number from the "task" Column for the PR Workflow
    Go to SWDD and analyze this workflow, check for steps which are sending the emails.
    (simplest possibility)
    Once you find the step, see if this can be blocked for a given user or not (or will it block for everyone).
    Reach there and give us the details of the email step and we shall work out a way.
    BTW - did you try to ask for the Functional and Technical Specs for this ?
    It should contain some details to help you.
    Regards,
    Modak

  • How to use inbound exit class for more than one workflow step

    Hi All,
    In Offline Workflow Approval Scenarios where the work items are sent to outlook of non sap users inbox through workitem exit of the respective workflow item. Based on the user reply from outlook email(either approve or reject) which sends an auto reply to Offline user . We configure an inbound exit class and assign the same in the SMICM transaction. Based on the code written using SAP_WAPI function modules in inbound class exit offline user gets the user approval result and performs the action in SAP.
    My question now Is how can we use this inbound exit class for all the steps of a workflow.
    For ex: In a workflow I have a decision step followed by an activity step. First I will write the work item exit for the user decision step and inbound exit code for the user decision step and offline user executed the user decision step with approve action.
    followed by that I have an activity step for that I will code a work item exit for that activity level but how can I user the same inbound exit class for the activity step as well .
    Quick reply  would be of great  help for me.
    With Best Regards,
    Veni

    For the outbound processing you have the option of replacing the workflow exit by chancing the bsp application of the extended notification (see note 1448241 solution as an example of how to do the change) and replacing the standard links with a "mailto:...".
    As far as the inbound processing, that depends on what should be done in the activity step, if for example you have a bapi which executes what the user does you can call it in the inbound class instead of the user and then the relevant wapi (complete the workitem/raise event etc.).

  • Mail Notification for Approval

    Hello,
    I want to be able to send e-mail's for notification to the approvers to approve the work item (contract, shopping cart) and to a group of people information mail once the work item (contract, shopping cart) is approved and PO is created and sent to the backend.
    What is not clear to me is, do i need to use Alert and Event Management or it is only through the workflow. ( We have implemented n-step approval BADI for contract and SC) ?
    thank you,
    Can anyone help me on this issue because i am receiving mails that shouldnt be coming and dont receive the expected mail (Approve workitem)? And stuck in the workflows...
    Thank you again,
    Message was edited by:
            Gaia K.

    Gaia,
    There are two approaches.
    You can schedule std. report RSWUWFMLEC to run at regular intervals. This report sends an email to the mail client of employees who have specified that their work items are to be forwarded there. The report creates an email for each work item that can be processed.  (Program RSWUWFMLEC is used to send the email data to EBP. Then program RSCONN01 is used to send the email to external mail servers.)
    OR you can add the send mail step in your n-step approval BADI. You have to format the text on your own using the data available in BUS2121.
    Hope this helps,
    SA

  • FYI Notification for EIT

    Hello,
    We have a below requirement for EIT Approval and FYI Notification -
    1) Employee will fill their training need in a EIT in self service,
    2) This EIT will go the Manger for Approval.
    3)If Manager Approves it then it will go to the Training department for Approval.
    *4)If Manager rejects it then one FYI Notification should go to the Training Department that Employee Manager has rejected it.*
    Every thing is fine Upto the 3rd point and we can achieve this with AME. However we are not sure how to send the FYI Notification to training department if the Manager rejects the training need for employee.
    Please let me know if you need any other information on my requirement.
    Thanks in advance for your anticipated help!
    Thanks
    Gaurav

    Gaurav, Approvals are setup using AME but called using HRSSA workflow. HRSSA workflow checks the approvers only when the response is approved. Once Rejected you can not change the process flow with AME. I am afraid you would have to customize the workflow at the time of Rejection Response.
    When you customize the workflow you have to keep in mind that same approval process is used across all the HRSSA workflows, so if you change all the processes would change.

  • BRF Workflow Error.

    Hi Experts,
    I have activated one step BRF Workflow for SC.
    On Ordering the SC work item is available in Managers queue.
    If I click on details on the workitem I am getting portal error with message "Assert Condition Violated".
    I can able to approve dirrectly in the work overview screen with out opening the SC.
    Kindly help me in this regard.
    Also in SLG1 transaction there are some warring messages related to some expresions with message "get discription error".
    Regards,
    B.N.Karthikeyan.

    Hello,
    You have to upgrade the UWL patch level. This should resolve the issue.
    Thanks
    Ashutosh

  • E-recruiting: Change of the sender in reject  e-mail for candidate

    Hello!!
    In e-recruiting 6.0 we needed modify the direction of the sender in reject  e-mail for candidate (activity u201Cnotification rejectu201D).
    At the moment, when a notification reject is sent, it appears the personal electronic direction of the recruiter who executes the activity (notification reject). The personal electronic direction (of recruiter) is registered in infotipo 105 subtype 0010.
    It is required that the sender direction is a generic direction (for example: work_with_us@example).
    ¿How I can realise this change?
    Thanks,
    Alicia

    Hi,
    in addition to the two solutions already mentioned I'd like to throw in the following two options:
    Instead of linking a workflow to every activity creation you could build an easy background job which runs once in a while sending the planned simple correspondences and invitations. The result would be the same as the workflow solution the sender is the user under which the job s planned.
    More flexible as not hard build in and development free would be a solution using the open correspondences function. You create a dummy user with the work_with_us@example e-mail using report RCF_CREATE_USER. This user is used to send all open correspondences and invitations manually. Of course this is more processing steps for the recruiters but if you need flexibility this is the price to pay.
    Kind Regards
    Roman

  • How to send email notification in different languages in Workflow ?? Urgent Help Needed

    Gurus,
    How to send email notification in different languages in Workflow? Can anyone send me some useful guidelines or link where it is mentioned.

    There is no profile option available to specify whether send or not send email notification.
    But after login, in preferences youcan set the notification preference value by which you can configure whether to send or not
    to send email notifications.
    If you select ''Do not send me mail' or 'Disabled' it will not send.
    For other values it sends the notfication in different formats like text, html, attachments etc...
    Edited by: sarojak on Jun 27, 2011 7:18 AM

  • Supplier is getting Closed notifications for message name EMAIL_PO_PDF

    Hi,
    Supplier is getting Closed FYI notifications for message name EMAIL_PO_PDF. Below is an example.
    Please suggest why they are generated and how to stop these notifications as supplier does not want to receive them.
    From: Production Workflow Mailer (D1556P) [mailto:[email protected]]
    Sent: Thursday, July 12, 2012 3:45 PM
    To: [email protected]
    Subject: Closed: KPN - Standard Purchase Order 3039086, 0
    You earlier received the notification shown below. That notification is now closed, and no longer requires your response. You may simply delete it along with this message.
    From               ROOS, C
    To               [email protected]
    Sent               18-JUN-12 22:10:57
    ID               865518
    Please review the purchase order and any other document attached to this message.
    Regards,
    Natasha

    Hi,
    Thanks for the response!
    The Autoclose_FYI parameter is set to Y already.
    Which parameter decides the end date for this type of notifications ? As we see end date is sometimes only 1 min and for others it is 20-30 days.
    Earlier the supplier was receiving only FYI notifications like KPN - Standard Purchase Order 3039086, 0+. Now, he is receiving Closed notifications like Closed*: KPN - Standard Purchase Order 3039086, 0_. How come the supplier is suddenly receiving FYI notifications with prefix CLOSED ?
    Regards,
    Natasha

  • Brf+ workflow configuration based on field values of UI

    Hello Experts,
    I would like to know if we can configure the BRF+ workflow steps for material to go to certain users based on certain values from UI fields . For example a particular material type (FERT) should go to specific processor . Can I add material type column in BRF+ for materials and assign specific material type values and assign users to that step. Is this possible?.
    Thanks.

    This is one of the most common questions. It will save you time if you perform some research before asking. Any way, review this document: How to-Master Data Governance for Material: BADI USMD_SSW_RULE_CONTEXT_PREPARE to Enhance User Determination which addresses your exact question.
    Also, for any future MDG questions, please take a look first at this document Configuration and Enhancement of SAP Master Data Governance as it contains many of the commonly required enhancements.

Maybe you are looking for