Remove & Push Settings failed

I am trying to get profilemanager working - currently sending remove/push settings does fail immediately (remove settings) or is pending forever (push settings: depending on payload?) whereas device enrolment, trust certificate installation, initial installation of settings using the website as well as requesting "Update Info" from profile manager does work.
1. During my research, I found out what ports to open in the firewall - amongst others: 5223
2. The server port should be accessible from 17.0.0.0/8 network
There I already seem to have an issue since I am not quite sure either it is a certificate, firewall, setup or service issue.
Am I wrong if I would expect port 5223 to be listening on the OS X server - at least for localhost?
master:~ root# telnet 127.0.0.1 5223
Trying 127.0.0.1...
telnet: connect to address 127.0.0.1: Connection refused
telnet: Unable to connect to remote host
OS X: 10.10.2
Server: 4.0.3
Client: iPhone 6
iOS: 8.2
Thank you for your suggestions!

Solved by some nasty issues
1. When using self signed certificates on your server, make sure to export the ROOT certificate from your keychain to install by hand on your device(s)
2. Do not use IKEv2 VPN or other profile settings restricted to "supervised devices" unless you are sure they are supervised
3. Ignore the fact the your server may not listen to port 5223
If you are still having issue, enabling Push Notification Log will also help.

Similar Messages

Push Settings Failed

Hi,
I got my new Mac Mini server last week and set it up for Profile Manager.
Got the certificates from Apple's Push Notification Server and all was working well. (Could push settings to iPads).
But on Wednesday, it stopped pushing new settings onto new iPads & iPhones (Completed Tasks lists "Push Settings 1 Failed").
I have enrolled the devices through https://macserver.local/mydevices and have installed the Trust Profile.
Could someone please shed some light on this?
-David

As today 10/01/2014 and probably one version more OSX Server 3.0.2 with Profile Manager still not push certificates payloads.
As reported here https://discussions.apple.com/message/24453341#24453341

Push settings

Installed Lion Server with profile manager following the book downloaded from Itunes. Open the correct ports on the router. Got a SSL certificate. Enrolled 3 devices on the Profile Manager. Push settings worked on one device initially. After that success, all push settings failed. Update info works, lock works, clear passcode works. Currently push settings for one device is still active (30min). Anyone have success pushing settings?

This is what I am finding. If the device already has a activesync profile, push will not overwrite and fail

Push settings always fail now with Profile Manager

So for the last months no matter what we do push settings always fails when enrolling a new device into the MDM. All ports are open on both networks (MDM and iPad), and we can normally enroll and push apps fine, but settings never go through.
What's the next step here? Is this a known issue?
In addition to that we often have problems enrolling devices, and they get stuck and stay "in progress" forever. The iPads can access the web interface to the MDM server just fine. Enrolling these devices through Apple Configurator.

Make sure the ports MDM requires are open to the outside
where there any changes made to profiles round or network about the time this started happening
have a look in the server logs, it might indicate what's wrong

URGENT HELP NEEDED (Bios Settings Failed)

Hey Guys,
I am having problems with my MSI Board, and don't know what to do. I am very much a noob to BIOS/and modding so I apologize in advance. You guys helped me a few months ago getting everything up and running and all was great for months. Then last night I walked away from my PC for a while and when i came back a starting screen was on saying my OC Settings Failed to load, i tried other versions I saved and they all failed as well. I ended up loading failsafe options, and got the "double start" where the computer turns on, then instantly shuts off, then turns on again. This allowed me to load windows 7, which then started to "install updates". So i think while i was away Windows automatically updated and rebooted... but would that effect my BIOS settings?
As I said, I had my system running perfect for months no errors or crashes at all based on the Bios setting you guys help me with in this thread: https://forum-en.msi.com/index.php?topic=147854.0
However, last week I removed the heat sink and installed this cooler: http://www.newegg.com/Product/Product.aspx?Item=N82E16835181010&nm_mc=OTC-Froogle&cm_mmc=OTC-Froogle-_-Water+Cooling-_-Corsair-_-35181010
All I did was unhook everything from the MB, install the cooler, and then hook everything back up to the MB. The only thing I may have done wrong is not connect the SATA devices (my HDs and ROMS) back in the spots they were in originally. However after I installed the cooler, they system booted right up, and I haven’t had any problems with my system for the past two weeks. I also should note I didnt make any BIOS changes either after I installed the cooler. So I don’t know if I should have done something there. Yet, like I said the system has been fine for the past two weeks, no crashes or errors... it wasn’t until last night after Windows auto updated that this has begun.
The reason I need "URGENT HELP" is because of course I just a new job with deadlines due and so much video editing work I need to do. I would be fine leaving it on failsafe settings, and forgetting the OC setting all together if I new that would make the system stable. But considering its still doing the "double start" even in failsafe mode, im afraid if i start working my system will crash.
So I am begging anybody for any advice or help they could provide. I will provide my system info below. If anybody can guide me as to what settings I should set in BIOS i would appreciate it. Or perhaps there’s a BIOS update that I should use now that I have a cooler and not a heat sink? If you need any more information from me, just ask. I will be monitoring this thread all day, as I desperately need help.
MY SYSTEM:
Intel 980X chip running Win 7 64bit (with MSI BigBang xPower MB installed in my old Dell XPS 730X)
(1) SATA II WD 3gb Hard Drive @ 1.5TB
(2) OCZ SATA II SSD drives @120GB: http://www.newegg.com/Product/Product.aspx?Item=N82E16820227543
(2) Hitachi 6gb SATA III drives @2TB: http://www.newegg.com/Product/Product.aspx?Item=N82E16822145473
3 DVD/CD/BLUERAY DRIVES:
1 SATA DVD DRIVE
1 SATA BlueRay Drive
1 SATA CD Drive
(So 8 SATA Devices Total)
24GIGs of this ram: http://www.newegg.com/Product/Product.aspx?Item=N82E16820145321
1 NVida Geforce GTX 470
1 Soundblaster X-Fi Titanum Card
New Addition Water Cooler: http://www.newegg.com/Product/Product.aspx?Item=N82E16835181010&nm_mc=OTC-Froogle&cm_mmc=OTC-Froogle-_-Water+Cooling-_-Corsair-_-35181010

PROBLEM: My OC BIOS setting wont load. Even on failsafe i get the "double start". I want to get back to my OC (stable) settings.
UPDATE: Since I posted somebody messaged me mentioned I should have "reset the CMOS" after I installed the new cooler. So I did that, and now they system starts fine without the "double start". I am able to load one of my saved OC settings now as well (but any others causes a failure).
NEW QUESTIONS:
1. Since I reset the CMOS and now the system is starting fine on my last OC settings, is it safe to assume the sytem is stable for now?
2. I never made any power changes or BIOS changes after I installed the new cooler. Should I have?
3. After I reset the CMOS was I soupposed to reinstall the drivers from the MSI disk again? I did not, and the system seems to be fine, but I thought I was soupposed to do that after a CMOS reset.
4. Is there a new BIOS version for my setup that may be better now? Im currently on v1.5
Here is a screenshot from CPUZ of the system information currently. This is with it booting normally after my CMOS reboot. I just figured id post it incase it helps with any of my questions. Thanks so much for helping guys!

Profile manager - removing computer settings

I've searched for an answer to this, but haven't found anything.
What happens when you remove profile manager settings for a computer? For example, I created settings for the dock that were pushed out. After that, I removed the settings in PM, but the settings still are in effect on the computer.

That is the problem I'm having. I remove the settings in PM, but they still remain in effect on the computer.

Error while configuring GCM: The push settings were not saved. Error 400

Hi,
While configuring push settings for google cloud messaging in azure mobile services, i entered the server key received from google developer console.
When i try to save the entry, i get the message The push settings were not saved <mobile-serversices-site>: Error 400
I have regenerated the key multiple times but of no use.
Am I missing something? I am a paid subscriber of Azure
Thanks, Laks.

Sorry for the late reply. Sometimes there are transient errors in the portal that affect whether or not the settings can be saved. Also, you should make sure that you have an associated notification hub (which will show up in your push settings). If there
is no associated hub, you will always get errors when trying to configure.

ALC-LCM-120-207 JMS settings failed validation

during install, got error at the step "Application Server Configuration Validation" step:
JMS settings failed validation
Failed to validate queue connection factory QueueConnectionFactory
any suggestions on how to get this fixed would be much appreciated.
there was no error whatsoever before this step.
the platform is: Windows 2003, WebSphere, SQL Server.
thanks

Jasmin, thanks for response.
WAS version is:
IBM WebSphere Application Server, 6.1.0.5
Build Number: cf50652.12
Build Date: 12/28/06
java -version returns "1.5.0".
not a cluster.
As far as I know, LC ES has not been installed on it before.
After I got the error, I checked the QueueConnectionFactory (using WebSphere console) by following the ES install guide's "Manual Configuring WebSphere" chapter. The only thing that didn't match on that screen was that nothing was set in the "XA recovery authentication alias" dropdown.
What to do next?

Push settings to AD users does not work / OD users works well

Hi,
I still have problems to push settings to users from Microsoft ActiveDirectory with Profile Manager. I can't see an error message...
What I did so far:
- Domain-Name (I can't rename): dudel.local
- Mac mini with Mavericks 10.9 and Server 3.0.1, IP 172.30.200.1/16, norad.dudel.local
- iMac with Mavericks 10.9, IP 172.30.220.19/16, a220019.dudel.local
- 2 Windows DNS Server on server daedalus.dudel.local (172.30.200.9) and prometheus.dudel.local (172.30.200.15)
- 3 Windows Domain Controller on server daedalus.dudel.local (172.30.200.9), prometheus.dudel.local (172.30.200.15) and aurora.dudel.local (172.30.200.16)
- Windows Domain Controller daedalus.dudel.local (172.30.200.9) acts as ntp server
- Opened and forwarded ports tcp/2195, tcp/2196, tcp/5223 and tcp/1640 to 172.30.200.1 (norad.dudel.local). Since the web interface of profile manager is only accessable from inside, I do not forward tcp/80 and tcp/443 from outside.
Mac mini:
1. After a clean install of Mavericks and Server 3, I set LocalHostName, ComputerName and HostName:
          scutil --set HostName norad.dudel.local
          scutil --set ComputerName norad.dudel.local
          scutil --set LocalHostName norad
2. Set in preferrences date/time server to 172.30.200.9 (daedalus.dudel.local)
3. With Server 3 I requested a APNS certificate
4. Checked DNS A and PTR with "changeip -checkhostname". changeip reports "success, there is nothing to change".
5. Activated/Setup OpenDirectory with the standard self-signed certificate in Server 3
6. Activated Web Server in Server 3
7. Configured Profile Manager (http://krypted.com/iphone/setting-up-profile-manager-in-lion-server/)
8. Bound norad.dudel.local (172.30.200.1) to ActiveDirectory:
          dsconfigad -add dudel.local -username administrator -password secret
9. Installed Workgroup Manager for Mavericks to set permission for users from ActiveDirectory (http://krypted.com/mac-security/integrating-mac-os-x-lion-servers-profile-manage r-with-active-directory/). After adding AD user 'marcus' to group com.apple.access_devicemanagement, I can add settings to the user with Profile Manager on https://norad.dudel.local/profilemanager
For testing I set the magnifying effect for the dock.
iMac:
1. After a cleant install of Mavericks I set LocalHostName, ComputerName and HostName:
          scutil --set HostName norad.dudel.local
          scutil --set ComputerName norad.dudel.local
          scutil --set LocalHostName norad
2. Set in preferrences date/time server to 172.30.200.9 (daedalus.dudel.local)
3. Bound to OpenDirectory norad.dudel.local
4. Bound norad.dudel.local (172.30.200.1) to ActiveDirectory:
          dsconfigad -add dudel.local -username administrator -password secret
3. With the local user 'admin' I accessed https://norad.dudel.local/mydevices and installed the "Trust Profile for DUDEL" and then registered the device. In Profile Manager the device is there, after clicking to "Devices" on the left pane. The Device is associated to user 'admin'. I changed it, by clicking in Profile Manager on "Users/marcus" and then added the device with the plus-sign on the right pane.
After logging in with user 'marcus' on the iMac, there is no setting pushed to the user. The setting I did is still "pending". Logging of and loggin in as user 'admin' makes it happen... the pending task is successful... But now, the setting to the Dock is now at the user 'admin' and not at user 'marcus'
This only happens to AD users. I tried an OD user. All settings are applied successful to the specified OD user....
What am I doing wrong?
Kind regards,
Marcus

Yes, DNS is is fundamental for networks, even for Windows networks. The DNS is working well for the existing Windows network and there are no problems in distributing certificates etc.
There are more than 150 users and 180 devices on the network without DNS problems.
I don't know how to discover a DNS problem... Windows works well.
DNS resolves fine... dig does it for "a" records and "ptr" records. nslookup resolves, too.
When the problem is a faulty DNS, why does the usage of users/devices from OD work with Profile Manager?
Renaming and/or migrating the ActiveDirectory is not possible. First, I want to be sure that there is a faulty DNS.
The .local TLD is not optimal for Bonjour/mDNS but I can't believe that there is no workaround

An OLD INACTIVE email address, asking for a password, continues to show up to play certain selections in my iTunes Music Library. I want to REMOVE this old email, HOW DO I REMOVE IT!! All attempts to remove it have failed!

An OLD INACTIVE email address, asking for a password, continues to show up to play certain selections in my iTunes Music Library. I want to REMOVE this old email address, HOW DO I REMOVE IT!! All attempts to remove it have failed!

Yes, if you change your Apple ID to your new email address. You don't have to. Under those sort of situations you can speak to Apple about transferring your purchased items to the new Apple ID, and see if they will help you.
You don't lose access to your older purchased items, you simply cannot update or re-download them or, in some cases, use them without providing the old Apple ID and password. All purchased items are permanently tied to the Apple ID used at time of purchase.

Sync settings failed

I opened Dreamweaver and got the message "sync settings failed"

I was having this same issue in Dreamweaver CC. "Sync Settings Now" was greyed-out in the Application Bar and in Preferences > Sync Settings. I did the following and it's working now:
- Opened Preferences > Sync Settings and checked "Enable Automatic Sync". Clicked Apply. The status under my Adobe ID changed to "Syncing...". I let it sit for about 10 minutes, but the status never changed. I closed/reopened Preferences and the sync status under my Adobe ID was showing a date and time of last sync, so it appeared to have synced, but "Sync Settings Now" was still greyed-out.
- Opened Help > Sign Out (Adobe ID) and signed out. Closed DW, relaunched, then had to sign-in again. "Sync Settings Now" still greyed-out.
- Opened Creative Cloud in web browser then clicked on account icon in upper right corner and selected "My Application Settings". I deleted my previous synced settings (I didn't have anything worth saving). Closed, then relaunched DW. "Sync Settings Now" still greyed-out.
- Rebooted computer. Launched DW. "Sync Settings Now" is back and working again. I opened Preferences > Sync Settings, disabled automatic sync, then clicked Sync Settings Now and it synced successfully (took about 15 seconds). I opened Sync Settings from the Application Bar and was able to sync from there as well. (NOTE: the sync settings button remains clickable regardless of how your automatic sync settings are set)
Good luck.
Edit: I'm using Version 13.1 build 6443
Message was edited by: rbsiddal

How to Remove "carrier settings updates"

Hello
do you know how to remove carrier settings updates downloaded from Itunes?
Thanks

The bottom of this document tells you where they are on your computer. I suppose you could delete them. There's nothing about deleting them from the phone.
http://support.apple.com/kb/HT1970

Removing LDOMS is failing

Hi,
I have successfully removed SUNWjass with the following command.
#pkgrm SUNWjass
but the gollowing error is thrown when I am removing
bash-3.00# pkgrm SUNWldm
The following package is currently installed:
SUNWldm Logical Domains Manager
(sparc.sun4v) 1.0.1,REV=2007.08.23.10.20
Do you want to remove this package? [y,n,?,q] y
## Removing installed package instance <SUNWldm>
(A previous attempt may have been unsuccessful.)
This package contains scripts which will be executed with super-user
permission during the process of removing this package.
# pkgrm SUNWldm
The following package is currently installed:
SUNWldm Logical Domains Manager
(sparc.sun4v) 1.0.1,REV=2007.08.23.10.20
Do you want to continue with the removal of this package [y,n,?,q] y
## Verifying package <SUNWldm> dependencies in global zone
## Processing package information.
## Executing preremove script.
## Removing pathnames in class <manifest>
svc:/ldoms/ldmd:default remains enabled; aborting
pkgrm: ERROR: class action script did not complete successfully
Removal of <SUNWldm> failed.
Could anyone help me.
Regards
Jayakrishna.K

The following worked for me:
#svccfg delete -f ldmd
& then
#pkgrm SUNWldm
removed the package
Regards
Jayakrishna.K

HT1766 Is it possible to remove icloud settings from my phone and restore it to its original apple settings?

I would like to know if its possible to remove icloud settings from my 3g apple iphone

Next time it is best to start your own topic.
Go to Settings>iCloud - you will need to scroll the settings until you get to the iCloud settings.
MJ

Photoshop CC Sync Settings failed

When I try and sync my application settings, I always get an error message saying 'sync settings failed - can't connect to creative cloud'. However, I am signed in to the creative cloud application manager (sitting in my task bar, saying I am signed in) and there is nothing wrong with my internet connection. Why can't my photoshop sync my settings?

Having the exact same issue, for months now (originally, I had (almost) no problem syncing settings.)
I'm on a 2010-2011 27" iMac running OS X Mavericks, never had a single software/network issue with this machine since the day I bought it. I typically run 2 to 4 Adobe apps simultaneously, in addition to Chrome, Spotify, Mail, and a couple of other apps/utilities sporadically with no performance delays (aside from memory cache needing to be cleared occasionally).
I'm connected to Creative Cloud via the app and signed-in via browser. In the CC app I can see that all my apps are up to date, I can access my files, I can see the synced fonts, etc (however I cannot connect to Behance).
Error messages I encounter:
Photoshop CC: Sync settings failed. Cannot connect to Creative Cloud.
Dreamweaver CC: Sync settings failed. Last Sync: 1/24/14 10:20 AM (not sure how that even connected or why during that time on that day.)
Illustrator CC: Cannot even click the Sync button, it's greyed out. If I click the Share on Behance button I get a pop-up that says, "Sorry, there was an error with your request. Please close this window and try again. Still Having Trouble? Contact Behance Help and reference error: Error fetching access token." If I go to that Behance Help page, there is no help on this topic, nor is there a search or anything to input this "Error fetching access token" reference error.
Indesign CC: Does not allow me to click the Sync button, I get a "bad-circle" like Ø icon.
TypeKit: Not an error message, but this feature is so unbelievably unreliable and inconsistent I dare even call it a "feature." Newly added fonts don't show up for days. Always need to restart Apps before they will show up. Sometimes fonts will just disappear. I love the IDEA of this but I'm so disappointed in the execution...are we PAYING to be beta testers?!
Not being able to sync my settings in the CC isn't the end of the world, but I still want to be able to do it, and I spend what? $50 a month on this, and this is like a CORE feature of the product.
I would sincerely appreciate any help at all fixing this CC syncing issue, I have no idea what to do next.

Remove & Push Settings failed

Similar Messages

Maybe you are looking for