Renaming managed devices in HPSIM (HP insight manager)

Hi, wonder if anyone can advise.
We have joined our xenservers into HPSIM and the devices are showing by IP address only.
Is there a way to rename the managed device manually so it can show the host name?
thanks

Hi NG Verma,
Since this related third party tools I suggest you ask HP for the further help, the following article about your manage tool may help you.
HP Systems Insight Manager Getting Started
http://www.hp.com/wwsolutions/misc/hpsim-helpfiles/mxhelp/mxportal/en/start.html
I’m glad to be of help to you!
*** This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these
sites and has not tested any software or information found on these sites; therefore, Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. There are inherent dangers in the use
of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet. ***
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

  • HP Systems Insight Manager - Database questions, what is this database for?

    Hello,
    I am either missing this information completely in the Installation guide or it doesn't exist, but I am looking for details of the database that HP SIM needs to install.
    -I assume this database will be used as a CMS?
    -What information will this database be storing?
    -If I have multiple HP servers, is it best to put this database on a remote dedicated database server? Will each HP machine that has SIM installed be pointing to this database?
    Thanks.

    Hello,
    New to this site so here we go with an issue on HP Systems Insight Manager v7.4.0
    System Insight Manager (SIM Server)  receives alerts from a second server when the server restarts but no other alerts although it should be receiving all alerts. 
    When looking at the management agent on the second server I try and send a test trap and although it is sent it is not received on the SIM Server.
    I do get alerts on the SIM server (and receive an email which has been set to send for all alerts) when the second server is restarted. 
    As I have set all alerts to be logged I should be getting spammed by the second server but it's all very quiet.
    Any ideas anyone as I am stumped?
    This topic first appeared in the Spiceworks Community

  • Vcenter 5.1 use HP SIM (HP Systems Insight Manager)

    Hi All Memember
    Now i use HP SIM monitoring wanranty of server only but i need use HP SIM check and monitoring hardware of server (vsphere 5.1) .
    Phase 1.
    I need to monitoring  HP Server in HQ ,  How to intergate HP SIM to vmware esxi ?
    Can check hardware and send email to IT ADMIN
    Version: Systems Insight Manager 7.0.0 - Windows      Build version:C.07.00.00.00
    My  VMware Exi
    HQ
    1 . HP server vSphere 4.1
        have vm  21 guest
    Datacenter
                                              Vcenter server
    1 HP server vSphere 5.1   2. HP server vSphere 5.1  3. HP Server vSphere 5.1

    Hello,
    New to this site so here we go with an issue on HP Systems Insight Manager v7.4.0
    System Insight Manager (SIM Server)  receives alerts from a second server when the server restarts but no other alerts although it should be receiving all alerts. 
    When looking at the management agent on the second server I try and send a test trap and although it is sent it is not received on the SIM Server.
    I do get alerts on the SIM server (and receive an email which has been set to send for all alerts) when the second server is restarted. 
    As I have set all alerts to be logged I should be getting spammed by the second server but it's all very quiet.
    Any ideas anyone as I am stumped?
    This topic first appeared in the Spiceworks Community

  • HP Systems Insight Manager - Disk Alerts Not being received

    Hello,
    I'm not receiving any disk alerts in HP SIM 7.4.0
    If I open HP SIM and click on the server that has a disk issue it shows that there is an issue with the disk and has an yellow triangle next to Smart Array controller which is good.
    However i am not getting an email alert for it.  If I go to Events - Automatic Event Handling - Manage Tasks I have All Events selected as I have only added one server so far so should get alets for everything.
    I only get an alert when restarting the server.  I should get an email to let me know that there is a problem with the array on the member server?
    This topic first appeared in the Spiceworks Community

    Hello,
    New to this site so here we go with an issue on HP Systems Insight Manager v7.4.0
    System Insight Manager (SIM Server)  receives alerts from a second server when the server restarts but no other alerts although it should be receiving all alerts. 
    When looking at the management agent on the second server I try and send a test trap and although it is sent it is not received on the SIM Server.
    I do get alerts on the SIM server (and receive an email which has been set to send for all alerts) when the second server is restarted. 
    As I have set all alerts to be logged I should be getting spammed by the second server but it's all very quiet.
    Any ideas anyone as I am stumped?
    This topic first appeared in the Spiceworks Community

  • HP Systems Insight Manager SNMP Traps not being received

    I found the following on HP help....is it any use?Why am I not receiving notification when there is a SNMP Authentication trap received? Solution: The default setting for Enabling Trap Handling in SNMP Extensions is Disabled (Not Processed). The reason for this is because typically, a system can be set up with an incorrect community string or an incorrect community string is set in HP Systems Insight Manager, which results in an Authentication Failure trap to be sent to the management server each time a request is made to the system. This results in many traps being logged. To change this setting to Processed (Enabled), complete the following steps:Open HP Systems Insight Manager (http://machinename:280).Log in as a user with full configuration rights.Select OptionsEventsSNMP Trap Settings. In the Mib Name field, select rfc1215.mib.In...

    Hello,
    New to this site so here we go with an issue on HP Systems Insight Manager v7.4.0
    System Insight Manager (SIM Server)  receives alerts from a second server when the server restarts but no other alerts although it should be receiving all alerts. 
    When looking at the management agent on the second server I try and send a test trap and although it is sent it is not received on the SIM Server.
    I do get alerts on the SIM server (and receive an email which has been set to send for all alerts) when the second server is restarted. 
    As I have set all alerts to be logged I should be getting spammed by the second server but it's all very quiet.
    Any ideas anyone as I am stumped?
    This topic first appeared in the Spiceworks Community

  • HP Systems Insight Manager

    I'm having an issue getting HP System Insight Manger to show/display detail for most of the 30+ proliant servers on the network.  See screen capture.  What am I missing or need to do?
    This topic first appeared in the Spiceworks Community

    Hello,
    New to this site so here we go with an issue on HP Systems Insight Manager v7.4.0
    System Insight Manager (SIM Server)  receives alerts from a second server when the server restarts but no other alerts although it should be receiving all alerts. 
    When looking at the management agent on the second server I try and send a test trap and although it is sent it is not received on the SIM Server.
    I do get alerts on the SIM server (and receive an email which has been set to send for all alerts) when the second server is restarted. 
    As I have set all alerts to be logged I should be getting spammed by the second server but it's all very quiet.
    Any ideas anyone as I am stumped?
    This topic first appeared in the Spiceworks Community

  • HP Systems Insight Manager - login fails

    Hi there,
    on "HP Systems Insight Manager" i can't login, because my password contains
    German special characters like (öüäß).
    The version of HP SIM is 7.4.0 on windows Server 2008R2 or Windows Server 2012R2.
    Is there a solution?
    Thanks in advance Ralf
    Hallo zusammen,
    ich kann mich beim "HP Systems Insight Manager" nicht anmelden,
    wenn mein Passwort deutsche umlaute enthält (öüäß).
    Die HP-SIM Version ist 7.4.0 auf Windows Server 2008R2 bzw. Server 2012R2.
    Gibt es dafür eine Lösung?
    Danke vorab Ralf

    Hello,
    New to this site so here we go with an issue on HP Systems Insight Manager v7.4.0
    System Insight Manager (SIM Server)  receives alerts from a second server when the server restarts but no other alerts although it should be receiving all alerts. 
    When looking at the management agent on the second server I try and send a test trap and although it is sent it is not received on the SIM Server.
    I do get alerts on the SIM server (and receive an email which has been set to send for all alerts) when the second server is restarted. 
    As I have set all alerts to be logged I should be getting spammed by the second server but it's all very quiet.
    Any ideas anyone as I am stumped?
    This topic first appeared in the Spiceworks Community

  • How to rename registered devices on Profile Manager

    When we use the Profile Manager for our iPad control, we can not select the each iPad to rename them . Is there any way we can rename the devices in Server side? Would you advise us how we can configure in Server side for allowing to rename them?
    We use OS X:10.9.5/iOS:8.1/Server:3.2.2

    You can only rename supervised devices with the profile manager.
    All other devices will not show the Rename option at the Devices section.
    The users can rename the devices and the new name will be shown after executing "Update Info" at the profile manager. I don't know any other way, with the exception of using the Apple Configurator.

  • Hp system insight manager-device discover issue

    Hi,
    I have recently installed hp System Insight Manager 7.4. But I can't discover any hp device. The system did not respond to SNMP. when discover any hp device then System Insight Manager showing error:
    Major: The system cannot be identified properly for HP SIM to manage;
                  unable to get one or more of the following: model, serial number or
                  unique identifier (UUID). For management processors, verify the
                  system is running the latest firmware. For Linux based operating
                  systems, you must have dmidecode installed, enable the
                  PermitRootLogin and PasswordAuthentication in sshd, and use root
                  sign-in credential. For HP-UX, verify the sign-in credential. For
                  Windows, check if WMIMapper is configured correctly on the CMS and
                  verify the sign-in credential.
    Any ideas on a fix for this?
    Thank you,
    Nahid

    I know there might be issues with cimserver and different versions of SMI-S solutions. SAN-OS 3.2 uses 1.1 and 3.3 and above uses 1.2. The changes are considerable and can make some SMI-S system not work well. I don't know if NX-OS is supported yet.
    I don't use HP SIM so I really can't say for sure but its worth checking on what is supported.

  • IPhone 5 shows as iPhone 4S in Manage Devices

    Subject pretty much says it all... when I go to Manage Devices in my iTunes store account, my iPhone 5 shows up as an iPhone 4S.
    When I first set up my iPhone 5, I did restore it from a backup of my previous iPhone 4S, but surely this is what everyone does?  I did the same going from the 4 to the 4S, without this particular problem.
    Any idea how to fix it? 

    Yep, I have the same problem. I raised the issue with Apple (case id 360600209) and typically as before they treat it as if they have not got a problem.
    The Customer Support Adviser suggests that I need to pay for technical support to resolve their problem. I gave him a piece of my mind and asked him to speak with someone senior before coming back tom; after several emails later, this is Apple's latest reply:
    Dear xxxxx,
    I have consulted my senior advisor to handle your request, however, your issue is out of our scope of support. You may get advice, insight, and hands-on technical support at a local Apple Store (there may be a fee for the visit). Find the Apple Store nearest you and click the link to make a reservation at the Genius Bar:
    So I am off to the Genius Bar today -- will report back.
    What farce for a leading and global company!!!!

  • Hi - I've brought the new iphone 5 but can't download my music from my itunes account even though I have the latest version (10.7). All i can see is that my account is not showing the iphone 5 as a 'managed device' and i dont know how to get this added ?

    Hi - I've brought my iphone 5 but cant seem to download my music from my itunes account onto it. I've downloaded the latest version of itunes as i heard this could be a problem but still no joy. The phone tries to sync when i plug it all in to the pc and even has the capacity bar showing about 12gb of audio but there is still nothing downloaded onto the phone.
    The only thing i can see that might be causing the problem is that when i go into my itunes account it doesn't show that the iphone 5 is an option is the 'managed device' section but i dont know how i can add the new iphone 5 to this....
    Can anyone please advise me on what to do ?
    Many thanks !
    Razor

    You can only sync to one computer/iTunes library. To make this your syncing computer:
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

  • HT204074 new iphone giving message it is not authorized to access my library.  how can I fix this??? SO annoying.  "manage devices" doesn't give me an option to add the new phone.

    I made an insurance claim and had to get a new iPhone.  I have the 5, not the newest 5s or 5c, the previous 5.  When I am NOT plugged into my MacBook I cannot access "my library" of songs that are on my macbook.  I can play them through my new phone if the phone is plugged into my macbok but not if I unplug the phone and try to play the songs while I'm away from home.  Help!!!  I do not see my new phone in the "managed devices".  I've restarted the phone and macbook and upgraded to OS7.  Nothing is working.

    Hello myvinoveritas,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iTunes Store: About authorization and deauthorization
    http://support.apple.com/kb/HT1420
    Best of luck,
    Mario

  • How do I remove a device from iTunes that does not show up under "Manage Devices" in account?

    My husbands macbook is logged in with his iTunes account.  For some reason my iPad (linked with my account) keeps showing up on his macbook under his account.  I went on his account and to manage devices and my iPad is not one of the devices listed.  So how do I permanentaly delete my iPad from showing up on his account?

    It is showing up in his iTunes library as all iDevices would.
    That has nothing to do with his iTunes account.
    My iPad device is not an option as a device being used by his apple ID.
    It's not being used by his AppleID.
    Select the iPad in his iTunes library.
    Click the Summary tab.
    Uncheck Sync this iPsd over wifi.
    Uncheck Open iTunes when this Pad is connected.
    Right click > Eject the iPad.

  • How can I put back my iPhone as a device in View My Account iTunes in the Cloud Manage Devices?

    I went into this list and noticed that I had my old iPhone 3Gs and my new iPhone 5s listed as devices. I also had 2 PC's listed.  So there were 4 devices associated wih my Apple ID.  Here is a little background.  When setting up my new phone, I had mistakenly given the new phone the identical name as my old iPhone 3GS, then realized that was a mistake because it would be hard to differentiate between the 2 phones in lists (for example: Restore backup lists is a very good example).  So I changed the name of my new phone so it would be different.
    My old phone was called Bruce's iPhone and my new iPhone was called Bruce's 5s.  Even though I had changed the name of my new phone, the list of devices under View My Account > iTunes in the Cloud > Manage Devices had the 2 phones still listed with the same name, Bruce's iPhone.  I was able to tell the difference by the date the devices were established, but I did not like that.
    So I used the 'Remove' button and deleted the listing for the newer listing of Bruce's iPhone.   Now, no matter what I try I can not get that new name and that device to get back on the list.  There are now 3 devices only.
    Since I did this, I have developed the issue where when I sync, the system hangs on Step 7 of the Sync, "Waiting for changes to be applied". I stopped it after 3+ hours.  Then I restored my most recent backup (to the Cloud) and the next Sync worked.  I have no idea if the above action on my part is in any way connected to my developing the syncing issue.
    Does anyone know how I can get that device, my new iPhone 5s, called Bruce's 5s back on this list of devices?  I seem to be able to do all the actions I want to with the devicer and my Apple ID.  But the coincidence of the above change that I ran into didn't make me smile either.
    Thanks in advance for any input/help?
    Bruce - obviously

    Is this your issue >  http://support.apple.com/kb/HT5818
    If so...
    The Apple ID and Password that was Originally used to Activate the iDevice is required
    If you do not have that information you will not be able to use the Device.

  • I am signed in itunes with me apple id and my iphone /ipad is in the same id but when i go in manage devices its only showing my iphone?

    I am signed into itunes with my id and my iphone / ipad are also on this id but when i go in to manage devices its only showing the iphone. Also just up dated my ipad now its saying not charging when its hooked up to the computer?

    If the problem persists, you'll probably have to make another apple id, it wont take off any games or music or apps or anything you've bought it will all stay there, i have two apple id's and i don't have a problem with anything.

Maybe you are looking for