HP Systems Insight Manager SNMP Traps not being received

I found the following on HP help....is it any use?Why am I not receiving notification when there is a SNMP Authentication trap received? Solution: The default setting for Enabling Trap Handling in SNMP Extensions is Disabled (Not Processed). The reason for this is because typically, a system can be set up with an incorrect community string or an incorrect community string is set in HP Systems Insight Manager, which results in an Authentication Failure trap to be sent to the management server each time a request is made to the system. This results in many traps being logged. To change this setting to Processed (Enabled), complete the following steps:Open HP Systems Insight Manager (http://machinename:280).Log in as a user with full configuration rights.Select OptionsEventsSNMP Trap Settings. In the Mib Name field, select rfc1215.mib.In...

Hello,
New to this site so here we go with an issue on HP Systems Insight Manager v7.4.0
System Insight Manager (SIM Server) receives alerts from a second server when the server restarts but no other alerts although it should be receiving all alerts.
When looking at the management agent on the second server I try and send a test trap and although it is sent it is not received on the SIM Server.
I do get alerts on the SIM server (and receive an email which has been set to send for all alerts) when the second server is restarted.
As I have set all alerts to be logged I should be getting spammed by the second server but it's all very quiet.
Any ideas anyone as I am stumped?
This topic first appeared in the Spiceworks Community

Similar Messages

HP Systems Insight Manager - Disk Alerts Not being received

Hello,
I'm not receiving any disk alerts in HP SIM 7.4.0
If I open HP SIM and click on the server that has a disk issue it shows that there is an issue with the disk and has an yellow triangle next to Smart Array controller which is good.
However i am not getting an email alert for it. If I go to Events - Automatic Event Handling - Manage Tasks I have All Events selected as I have only added one server so far so should get alets for everything.
I only get an alert when restarting the server. I should get an email to let me know that there is a problem with the array on the member server?
This topic first appeared in the Spiceworks Community

Hello,
New to this site so here we go with an issue on HP Systems Insight Manager v7.4.0
System Insight Manager (SIM Server) receives alerts from a second server when the server restarts but no other alerts although it should be receiving all alerts.
When looking at the management agent on the second server I try and send a test trap and although it is sent it is not received on the SIM Server.
I do get alerts on the SIM server (and receive an email which has been set to send for all alerts) when the second server is restarted.
As I have set all alerts to be logged I should be getting spammed by the second server but it's all very quiet.
Any ideas anyone as I am stumped?
This topic first appeared in the Spiceworks Community

SAP mibs and Systems Insight Manager (SIM)

I'm trying to get our CCMS to send SNMP traps to our SIM (Systems Insight Manager) server. The SAP side of the setup is pretty straight forward. The SIM side, however, is not so clean.
Hopefully someone has had experience with this, and can either point me at some documentation / blogs that I've not yet been able to find, or just let me know where I've gone wrong.
The SIM server is 64bit Windows 2003, with SIM v 5 SP5.
The base mib pack is 7.70.
I've put the mibs provided by SAP on the SIM server in the mibs sub-folder.
I then ran "mcompile SAP_R3_MIB.txt" at a command prompt and it generated "SAP_R3_MIB.cfg".
Next I ran "mxmib SAP_R3_MIB.cfg" which said it completed successfully.
Yet, when I go into "Options -> Events -> SNMP Trap Settings.." the SAP_R3_MIB is not listed.
I have brought other non-SAP mibs in this way in the past. Is there something special I'm missing?
Any help would be greatly appreciated.

Hi,
I am trying to send SNMP alert from Solution Manager to Tivoli TEC. On solution Manager side log files shows that trapsend was triggered and there was no error. However I do not have any visibility on TEC side which is managed by other team. All i do is when I perform test , i asked them to check if they received anything and they say NO.
I had given them MIBS provided by SAP to TEC team. I don't know what they have done with that but looking at your blog I can tell that you are experienced on the receiving side.
Can you help me to understand the steps they should be performing with MIBS which I gave them. Do they need to change.txt file to .mib as you did. Also what is the way to check if they are receving anything or not? any tool or command at OS level also ?
If you have any document which you created based on your experience, it will be great. you can send it to me at [email protected]

Hp system insight manager-device discover issue

Hi,
I have recently installed hp System Insight Manager 7.4. But I can't discover any hp device. The system did not respond to SNMP. when discover any hp device then System Insight Manager showing error:
Major: The system cannot be identified properly for HP SIM to manage;
              unable to get one or more of the following: model, serial number or
              unique identifier (UUID). For management processors, verify the
              system is running the latest firmware. For Linux based operating
              systems, you must have dmidecode installed, enable the
              PermitRootLogin and PasswordAuthentication in sshd, and use root
              sign-in credential. For HP-UX, verify the sign-in credential. For
              Windows, check if WMIMapper is configured correctly on the CMS and
              verify the sign-in credential.
Any ideas on a fix for this?
Thank you,
Nahid

I know there might be issues with cimserver and different versions of SMI-S solutions. SAN-OS 3.2 uses 1.1 and 3.3 and above uses 1.2. The changes are considerable and can make some SMI-S system not work well. I don't know if NX-OS is supported yet.
I don't use HP SIM so I really can't say for sure but its worth checking on what is supported.

HP Systems Insight Manager - Database questions, what is this database for?

Hello,
I am either missing this information completely in the Installation guide or it doesn't exist, but I am looking for details of the database that HP SIM needs to install.
-I assume this database will be used as a CMS?
-What information will this database be storing?
-If I have multiple HP servers, is it best to put this database on a remote dedicated database server? Will each HP machine that has SIM installed be pointing to this database?
Thanks.

Hello,
New to this site so here we go with an issue on HP Systems Insight Manager v7.4.0
System Insight Manager (SIM Server) receives alerts from a second server when the server restarts but no other alerts although it should be receiving all alerts.
When looking at the management agent on the second server I try and send a test trap and although it is sent it is not received on the SIM Server.
I do get alerts on the SIM server (and receive an email which has been set to send for all alerts) when the second server is restarted.
As I have set all alerts to be logged I should be getting spammed by the second server but it's all very quiet.
Any ideas anyone as I am stumped?
This topic first appeared in the Spiceworks Community

Vcenter 5.1 use HP SIM (HP Systems Insight Manager)

Hi All Memember
Now i use HP SIM monitoring wanranty of server only but i need use HP SIM check and monitoring hardware of server (vsphere 5.1) .
Phase 1.
I need to monitoring HP Server in HQ , How to intergate HP SIM to vmware esxi ?
Can check hardware and send email to IT ADMIN
Version: Systems Insight Manager 7.0.0 - Windows      Build version:C.07.00.00.00
My VMware Exi
HQ
1 . HP server vSphere 4.1
    have vm 21 guest
Datacenter
                                          Vcenter server
1 HP server vSphere 5.1   2. HP server vSphere 5.1 3. HP Server vSphere 5.1

Hello,
New to this site so here we go with an issue on HP Systems Insight Manager v7.4.0
System Insight Manager (SIM Server) receives alerts from a second server when the server restarts but no other alerts although it should be receiving all alerts.
When looking at the management agent on the second server I try and send a test trap and although it is sent it is not received on the SIM Server.
I do get alerts on the SIM server (and receive an email which has been set to send for all alerts) when the second server is restarted.
As I have set all alerts to be logged I should be getting spammed by the second server but it's all very quiet.
Any ideas anyone as I am stumped?
This topic first appeared in the Spiceworks Community

HP Systems Insight Manager

I'm having an issue getting HP System Insight Manger to show/display detail for most of the 30+ proliant servers on the network. See screen capture. What am I missing or need to do?
This topic first appeared in the Spiceworks Community

Hello,
New to this site so here we go with an issue on HP Systems Insight Manager v7.4.0
System Insight Manager (SIM Server) receives alerts from a second server when the server restarts but no other alerts although it should be receiving all alerts.
When looking at the management agent on the second server I try and send a test trap and although it is sent it is not received on the SIM Server.
I do get alerts on the SIM server (and receive an email which has been set to send for all alerts) when the second server is restarted.
As I have set all alerts to be logged I should be getting spammed by the second server but it's all very quiet.
Any ideas anyone as I am stumped?
This topic first appeared in the Spiceworks Community

HP Systems Insight Manager - login fails

Hi there,
on "HP Systems Insight Manager" i can't login, because my password contains
German special characters like (öüäß).
The version of HP SIM is 7.4.0 on windows Server 2008R2 or Windows Server 2012R2.
Is there a solution?
Thanks in advance Ralf
Hallo zusammen,
ich kann mich beim "HP Systems Insight Manager" nicht anmelden,
wenn mein Passwort deutsche umlaute enthält (öüäß).
Die HP-SIM Version ist 7.4.0 auf Windows Server 2008R2 bzw. Server 2012R2.
Gibt es dafür eine Lösung?
Danke vorab Ralf

Hello,
New to this site so here we go with an issue on HP Systems Insight Manager v7.4.0
System Insight Manager (SIM Server) receives alerts from a second server when the server restarts but no other alerts although it should be receiving all alerts.
When looking at the management agent on the second server I try and send a test trap and although it is sent it is not received on the SIM Server.
I do get alerts on the SIM server (and receive an email which has been set to send for all alerts) when the second server is restarted.
As I have set all alerts to be logged I should be getting spammed by the second server but it's all very quiet.
Any ideas anyone as I am stumped?
This topic first appeared in the Spiceworks Community

Issue while installing HP System Insight Manager on Windows Server 2008

Hi everybody,
as I wrote in the subject, I'm having trouble while trying to update my HP SIM vers. 6.1 to HP vers. 7.1 on my server running Windows Server 2008 Enterprise SP1.
I encounter the errore message:
"HP System Insight Manager Installer detected an unsopported operating system..."
How can I fix this problem?
is it OS really unsopported or Do I have to perform some upgrade before?
is it because of my Microsoft SQL server version? I have the 2005 ver. Do I need the 2008 one?
in anycase HP SIM vers. 6.1 runs with no problem.
Thanks
D

It appears that you have a commercial LaserJet in an enterprise enviornment. It would be best to post in the commercial LaserJet forums.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Samsung note II, known issue of aol mail not being received on phone

I spent hours on the phone with Customer Service this past Wednesday & Thursday because my aol mail is not being received on my new phone. I just did some research online, and found out this has been an issue with AOL and Verizon since December 2012. The Customer Service rep told me this just happened the past week! What a bold faced lie!
I purchased this phone on or about July 3, and the AOL mail was working fine until this past Wednesday.
This is a know issue, and yet the lie right to your face about it.
I had a C/S rep tell me he would call me back later in the day, before he left work. I told him, I have heard that before. Oh, no, I will call you. Of course he didn't call. Your C/S reps think they can say whatever they want, but the calls have been monitored or tracked someway by your computer system.
I see many others have the same problem with the Samsung Note II and their email accounts.
Since December this has been going on, don't you think it's time you fixed the problem?
Two years ago, when I spent $200 on a phone, I said never again. But yet I wanted a 5.5" screen so I paid up! Never again!

I FINALLY spoke to someone today who was able to solve my problem so far.
In the PLAY STORE....look for K9 email app.....and download that...put in your AOL email address and password. You should now be able to receive your aol email on your phone.
It seems he has a Note II also, and had the same problem.
You would think that MANAGEMENT would tell all their C/S reps how to solve the problem. I guess they would rather lose a customer who has been with them for 10 yrs.

I'm being asked to enter my ID password on my ipad for icloud, but the email is no longer active and reset remails are not being received.

I'm being asked to enter my ID pswd on my ipad 2 for icloud. but the email address and ID are no longer being used, and reset emails are not being received. How can I deactivate this? I have another ID which works fine, but this issue with the old ID is not allowing me to use my ipad. thanks.

If your iPad is signed into an old ID and you are trying to change it, if the old ID is yours, and if it is an earlier version of your current ID, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iDevice, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

Email Templates not being received by btinternet.c...

We are having several issues with emails not being received when sent to btinternet.com addresses.
The system we use to send the emails is monitored by send grid, which states the emails have been sent, but we are getting reports that the emails aren't being received through btinternet.com. We have checked the dns settings and checked spam folders and nothing is coming through. Any help on this would be greatly appreciated.
Many thanks
Shaun

If you have a search through the forum you will see it appears to be a common problem without resolution currently. Having a valid SPF record for the sending domain may help but has not always worked. It appears BT's new mail provider (Openwave formerly Critical Path) are not very good and are being unnecessarily agressive with their anti-spam measures.

I've set up my Gmail account to auto forward messages to iCloud Mail but message are not being received. Can anyone help?

I've set up my Gmail account to auto forward messages to iCloud Mail but message are not being received in iCloud Mail.
Can anyone help?

Try this out... this worked like a charm:
*On a desktop PC, log into your gmail account.
*Click the gear up in the top right corner > Settings
*Click Accounts
*Under "Change Account Settings", click "Other Goole Account Settings"
*Along the left, click "Security"
*Under 2-step verification, click "Manage your application specific passwords"
*It will ask for your usual gmail account password and take you to a page that says "
Authorized Access to your Google Account
*You will see a box to type in something (I just typed in iPad) then click "Generate Password"
*It will generate a random password for you... you will need this password Once in your iPad....
Now...
*Go to your iPhone Settings>Mail, Contacts, Calendars>Add Account>Google
*Type in your name, your usual gmail email address and for the password, type in that random one generated on your PC
It should work from there, if not follow what is below!
*On a desktop PC, log into your gmail account.
*Click the gear up in the top right corner > Settings
*Click Accounts
*Under "Change Account Settings", click "Other Goole Account Settings"
*Along the left, click "Security"
*Under 2-step verification, click "Manage your application specific passwords"
*It will ask for your usual gmail account password and take you to a page that says "
Authorized Access to your Google Account
*You will see a box to type in something (I just typed in iPad) then click "Generate Password"
*It will generate a random password for you... you will need this password THREE TIMES in your phone or ipad....
Now...
*Go to your iPhone Settings>Mail, Contacts, Calendars>Add Account>Other>add mail account
*Type in your name, your usual gmail email address and for the password, type in that random one generated on your PC
*Next
Incoming Mail Server:
Host Name: imap.gmail.com
User name: (your gmail email address)
Password: TYPE IN THAT RANDOM PASSWORD AGAIN
Outgoing Mail Server:
Host name: smtp.gmal.com
User name (your gmail email address)
Password: TYPE IN THAT RANDOM PASSWORD AGAIN
Done
And allll the emails came rushing in Hope this works for you!

Email notifications not being received

Email notifications are not being received every time a customers submits data. We stopped receiving notifications after the email came about shutting down the service. We have a half dozen forms live on the web and none of them are sending out notifications. One example is located at Online Complaint | ORCAA. Nothing has changed from the backend and both email addresses that should receive notifications are verified.
I submitted data to the form and received a notification, but not the 2 email addresses that are listed on the FormsCentral backend. The Adobe domain is whitelisted with GApps.
Thoughts?

I've tested your form a bit and it seems that email receipts are working. For me to test email notifications I would need to be a co-author. If you can add me to one of the problem forms I will investigate further and let you know what I find.
Andrew Yarborough
[email protected]

Sharing photos by email - Emails are not being received

My photos which I have shared by email are not being received, even though I have a confirmation that they have been sent (one photo has been sent).
I am using a @me.com email address and I have tried to send a photo to myself and this has still not been come through.

Do you have iPhoto setup to email the photos itself or use Mail to email the photos?
Happy Holidays

HP Systems Insight Manager SNMP Traps not being received

Similar Messages

Maybe you are looking for