Replacement of Ranges in ECC 6.0

Hi Experts,
I am working on ECC 6.0. Here Ranges are obselete. But in my case i want ot use them. Is there any alternative.

TYPES: BEGIN to T_RANGE,
             sign(1) type c,
             option(2) type c,
             low type <data type>,
             high type <data type>,
            end of t_range.
DATA: <your range> type table of t_range.

Similar Messages

  • How to implement the selection range of  ECC in the CRM WEB UI.

    HI Experts.
       I want to use the selection range like ecc range in the crm web ui,and use the context node attribute.
       thanks very much.

    Hi Shawn,
    Do you mean you would like to have "is between" selection operator for sales org in CRM, as an example?
    Please check the screen shots attached, do you mean you want the selection by range as shown in the pic for the sales order id also for the sales org ?
    If yes, I'd like to say it is possible to be enhanced. As you can see for the dropdown of operators for sales org ID, it only has is or is not. Whether it is possible to include "is between"?
    Option 1:
    in view CRMV_DQ_ATTROP, please locate the dynamic search object you are interested, and locate the attribute/field, from there you can configure the possible operators.
    Option 2:
    in method GET_DQUERY_DEFINITIONS, you may try to append the extra operators into the internal table.
    Hope this could do help!
    Hongyan

  • Replace color range

    I have an application where I need to replace a range of red values with a single red value in an HSL image.  I need to replace the values from (1,255,82)-(14,255,127) with (1,255,82).   I imagine this could be done with color thresholding the image but I'm not sure how without losing the other colors or getting an invalid image error.
    Chris

    In Vision and Motion utilities i found IMAQ RGBToColor2, Check it may help.
    Balaji PK (CLA)
    Ever tried. Ever failed. No matter. Try again. Fail again. Fail better
    Don't forget Kudos for Good Answers, and Mark a solution if your problem is solved.

  • Replacement for HELP_VALUES_GET_WITH_MATCHCODE in ECC 6.0

    Hi Friends,
                    should the FM HELP_VALUES_GET_WITH_MATCHCODE bereplaced with the new one in ECC 6.0 or not.if so what is the replacement for it.Please provide.
    Regards,
    Pradeep P

    Hi,
      HELP_VALUES_GET_WITH_MACO is the one which is obsolete but is called from within the HELP_VALUES_GET_WITH_MATCHCODE function module which is not obsolete. I don't why it is like that, but may be for compatibility reasons, they left it out like that.
    But as of now your function module is not obsolete.
    Regards
    Kiran Sure

  • Wrong number range in ECC Message creation in "Create Support message " tab

    Dear All,
    While creating the support message in any R3 server (ECC,BW etc.) system by clicking
    help->create support message option in main menu tab.
    The message number sequence changes from existing to new saequence.
    The initial sequence is 9999011940 but the current sequence generated
    by system is 1549. We had updated our R3 system with SAP_APPL component
    stack to 17. This changed sequence is happening after patch upgrade.
    Thanks in advance.
    Regds
    Ravi Kant Arya
    +91 9818880902

    Hi Ravi,
    Did you also patch your SOLMAN system ?
    I believe this is controlled by number range object CRM_SERVIC  in your solution manager. Check OSS note 903528 (particularily the section around the resetting of the number range object)
    Regards.
    Ruchit.

  • Replacement of OMGS in ECC 6.0

    Hi,
    Actually in 4.6c, in a report a statement which calls TCode: OMGS by using
    Call Transaction 'OMGS'.
    I need to replicate the same program in ECC 6.0, How do we call the Release procedure for Purchase Orders ?
    Instead of navigating through OLME -> Purchase Order -> Release procedure for Purchase Orders, is there any direct calling of Release procedure for Purchase Orders ? or Please let me know the best way to call it ?
    As of now i am thinking to change the code to CALL TRANSACTION 'OLME', but user has to again navigate from there to Release Procedure. User needs a provision to call directly 'Release procedure for Purchase Orders' instead of navigation from OLME.
    Thanks,
    Ravi

    TYPES: BEGIN to T_RANGE,
                 sign(1) type c,
                 option(2) type c,
                 low type <data type>,
                 high type <data type>,
                end of t_range.
    DATA: <your range> type table of t_range.

  • Replication of account master with 2 diff number ranges to ECC.

    HI All,
    Wish you happy new Year....
    I have a doubt in Master Data replicating from CRM to ECC.
    Here is a situation where i  have to create 2 number ranges with groupings in CRM for prospects and has to replicate to ECC SD. I heard that only one number range(ie Z1) can only be used to replicate to ECC and ( I.e. Z2) number range masters can not flow to ECC.so can you guys please tell me what are all the problems in replicating the master to ECC if i use 2 number ranges with groupings.
    Thanks and Regards,
    Arun

    Hi Deepak,
    Have you downloaded R/3 sales area(ie,. org + distribution Channel+division) to CRM? If you are not using standalone CRM scenario, then you have to maintain R/3 sales area in and then download it into CRM through customizing adapter object dnl_cust_s_area.
    Then you have assign R/3 sales org to ur created organization in CRM and define distribution channel and division in the attribute tab of ppoma_crm.
    Kindly check have u done all the above mentioned steps?
    Thanks & Regards,
    Anirban

  • Defining Vendor  Num Ranges in ECC and  BP  Num Ranges in SRM

    Dear Experts,
    System information ECC 6.0, SRM 5.0
    Wanted to know if I need to define any additional BP Number ranges in SRM  to cover the External Vendor Numbers coming from ECC.
    This is the ECC Vendor Number Ranges:
    No    From No                       To Number                     Ext
    01     0100000000                 0199999999
    XX    1AAAAAAAA                1ZZZZZZZZ                      YES
    Z1    0000001000                  0000009999                     YES
    Z2    01TAX0000                    09TAX9999                       YES
    Z3    A                                  ZZZZZZZZZZ                      YES
    Z4   0000010000                    0099999999                       YES
    This is the corresponding BP number ranges in SRM:
    No       From No                         To No                        Ext
    01      3000000000                   3999999999
    AB     1000000000                   1999999999                  yes
    MD     9000000000                  9999999999                   yes.
    Do I need to define a ext number range in SRM for the alpahumeric vendor ranges defined in ECC(XX, Z2, Z3)  or will that be covered in the AB range in SRM ?
    Points will be rewarded for answers.
    Thanks in advance.
    Best regards,
    Bob.

    This can be closed. Lalit
    Edited by: Lalit  Sharma on Dec 17, 2010 8:55 AM

  • Document types, number ranges in ECC 6.0

    How r u.
    I have a question in ECC 6.0. When we are defining document types and document number ranges what is “Define Document types for entry view in a ledger”, “define document types for general ledger view” and “Define Document Number Rangers for General Ledger View”
    Please explain clearly
    Thanku

    In New GL functionality introduced by SAP we have the concept of Leading Ledger (used by Classic GL or ledgers used before ECC) and Non Leading Ledger (multiple ledger concept).So the Document Type for these 2 Ledger types needs to be defined seperately
    For Classic GL or Ledger used before ECC use the : Define Document Type for Entry View (Classic GL means GL Functionality available in R/3)
    For Non Leading Ledger use: Define Document Type for Entry View in Ledger or Define Document Type for General Ledger View (Applicable only for New GL Functionality)
    Similarly the above classification is also applicable for Document Number Ranges.

  • Replicating CRM org number ranges to ECC issue

    Hi,
    After saving the sales order in CRM system, I'm getting an error message that the number range of
    the CRM org unit is not defined in ECC.
    Can I get customization help with this replication issue please .
    Points will be given
    Many Thanks
    Deepak

    Hi Deepak,
    Have you downloaded R/3 sales area(ie,. org + distribution Channel+division) to CRM? If you are not using standalone CRM scenario, then you have to maintain R/3 sales area in and then download it into CRM through customizing adapter object dnl_cust_s_area.
    Then you have assign R/3 sales org to ur created organization in CRM and define distribution channel and division in the attribute tab of ppoma_crm.
    Kindly check have u done all the above mentioned steps?
    Thanks & Regards,
    Anirban

  • Replacement for CONVERT_DATE_INPUT in ECC 6.0

    Hi,
    I'm working in ECC 6.0. The Function Module CONVERT_DATE_INPUT  is obsolete in ECC 6.0. Please suggest me the correct function module.
    Thanks,
    Ramya Reddy.

    hii
    use this
    <b>CONVERT_DATE_INPUT
    CONVERT_DATE_TO_INTERNAL
    CONVERT_DATE_TO_INTERN_FORMAT</b>
    To get the Format of the Date:  <b>SLS_MISC_GET_USER_DATE_FORMAT</b>
    Otherwise use this simple logic
    <b>data: date_1 (8).
    write date to date_1 yy/mm/dd.
    WRITE LIKP-LFDAT MM/DD/YY.</b>
    or using concatenation .
    data : date_time(20) value '060102125033'.
    data : date(8) , time(8) , count type i.
    date = date_time+(6).
    time = date_time+6(6).
    concatenate date(2) '/' date2(2) '/' date+4(2) into date.
    concatenate time(2) ':' time2(2) ':' time+4(2) into time.
    write : time , date .
    Reward points if helpful
    Regards
    Naresh

  • Number ranges - APO or ECC system - Which one is master system?

    Hi
    In SRM always SRM system is a  master system for issuing number range. to create a folow on documents like purchase request and Purchase order . SRM system always determines the number range  for  purchase orders , Purchase request .
    for example in Classic scenario :-
    SRM we create a Shopping cart and Purchase order in  ECC system.but SRM determines the number range which number Purchase order needs to be created.
    What about in APO number ranges for Purchase request and Purchase order ? .iS That SAME ? .
    In APO , do you have technical scenarios like Classic and Extended classic?
    classic :- shoping cart crated in SRM and Purchase order will be created in ECC system.
    Ext Classic :- Shopping card created in SRM and Purchase order will be created in SRM itself and replicated to ECC system.
    But both above scenarios, SRM system is a master system to issue number ranges.
    i learnt that APO system dont supply any number ranges to create a PR or PO in ECC system (trigger from APO) only ECC system determines? is it true?
    BR
    Muhtu

    Hi,
    For Purchase requisition there is temporary number range in APO system but once requisition gets transfered to ECC through CIF it determines number range from ECC and returns back same number to APO.
    For Purchase order number range exists in ECC only and not in APO. Even if you trigger conversion of PR to PO from APO number range will be taken from ECC only.
    So ECC remains master system .
    Regards,
    Santosh

  • PO No range when we ink two SRM system with One ECC system

    Hello Experts,
    We have a client requirement to link Two SRM Systems with One ECC system.
    In this case what number range we need to maintain in both SRM systems for PO.
    -The number range of ECC PO should get update whenver the PO is transferred from any of the two SRM system.
    -We have Extended classic scenario.
    -Also PO Doc type is going to be same.
    Can we handle this by increasing the buffer of the number range in one of the SRM system?
    Any idea...pls help urgently.
    Best Regards,
    Anil
    Edited by: anil.s.verma on Oct 1, 2010 4:33 PM

    Hello Anil,
    Being in Extended Classic Scenario (leading PO being in SRM, R/3 PO number range is concidered as external because PO number is given by SRM), the only solution for you is to:
    1- give same number range interval for PO (internal in SRM system 1 and SRM system 2, external number range in R/3), e.g. 3100000000 - 3199999999
    2- in SRM system 2, fill in current number with (for example) 3159999999 and let empty (or current value) in SRM system 1
    3- assign, in each system for your concerned transaction type, number range as internal in SRM and external in R/3.
    In this way, you will avoid overlaping in R/3 between PO numbers coming from SRM system 1 and SRM system 2
    Regards.
    Laurent.

  • Number range" A to ZZZZZZZZZZu201D is not replicating to ECC

    Number range" A to ZZZZZZZZZZu201D is not replicating to ECC.
    Number range A to ZZZZZZZZZZ is assigned to u201CAS04u201D Grouping in CRM system and this same number range are configured in ECC system as well.
    I understand that in order to replicate business partner we need to have same number ranges in both the systems and if CRM having external number range, R/3 number range
    Should be internal.
    I found in my systems, external check box is checked for this number range in both the systems.
    I tried to uncheck the external number check box in R/3 system and System gives an error message to u201Center a numeric numberu201D and it doesnu2019t allow me to uncheck the external number check box and save.
    Please advise, can we use alphabetic number range from CRM to R/3?
    Regards,
    Silpa.

    Hi Arup,
    Thanks a lot for your reply,
    Yes, we have configured the same number range in ECC as well.
    We have three account groups in CRM, number ranges configure correctly in both the systems.
    1)AS01
    2)AS02
    3)AS04
    AS01 is replicating from CRM to R/3 fine, but AS02, AS04 Groupings are not replicating to R/3.
    But i found some thing wrong in PIDE settings for AS02, AS04 groupings, below are the PIDE settings.
    CRM->R/3
    Classification/Account Group/Name
    A/AS01/End customer
    B/AS01/End customer
    E/AS01/End customer
    R/3->CRM
    Account Group/Name/Classification/Group/External
    AS01/End customer/B/03/External
    AS02/Agent/B/04/External
    AS04/Trading house/B/05/External
    Kindly note that, for AS04 grouping we would like to use external number range in CRM system.
    Please advise what should i change in PIDE settings?
    Regards,
    Silpa.

  • Mapping ECC to CRM

    Hi,
    I am new to abap and I have this requirement to work on. I need to create some tables in ECC and then map those tables to CRM via the middleware. And data has to be passed from ECC to CRM everytime there is a change in ECC. Is there any tutorial or link that will explain to me how I can MAP ECC and CRM. Please help.
    Moderator message: sorry, these forums cannot replace proper training, please search for available information.
    Edited by: Thomas Zloch on Nov 29, 2011 1:03 PM

    Hi Kris,
    We  maintain the mapping between ECC BP Grouping to CRM BP Grouping in ECC with transaction code PIDE.
    In your case do the following settings is required in PIDE -->R/3->CRM: Assign Account Grp. to BP Classification
    Values are maintained in ( )
    Account Group (CUBP)  
    Description(Sold To party)       
    Classification    (B)
    BP Grouping    (Z1)       
    External (Tick     )
    Maintain same number range in ECC & CRM.
    Best Regards,
    Rajendra Sonawane

Maybe you are looking for

  • SUBMIT RVV50R10C not working in background as well as foregrnd tcode:vl10b

    Hi,    I have to create a code which creates delivery of STO in background as baapi creating issue and BDC can not be used for this, i am using submit. Code is as follows : report ZKIRAN. TABLES : mara. TYPES : BEGIN OF STR,          SIGN(1),        

  • Admin user security in obiee 11g

    Hi, Can we restrict particular admin user(newly created) in seeing the data in all the reports,where he can see only the coulmn names. when ever he generates the report. ex: A B C 1 2 3 4 5 6 is the data genereated in the report, the admin user shoul

  • Vendor Approval by QA

    Hi gurus, I want to control vendor approval through QA department. Please advice how can I map the same in QA module. Thanks Sachin

  • 17" 2010 MacBook Pro, no audio in video playback

    I don't know when this started, I first noticed it this morning when someone sent me an mp4 video to check.  I got no sound, using QuickTime player, VLC and a DivX player.  I could open the video in Premiere and play it there, and the sound came thro

  • Open a file, then close current pdf file

    Acrobat X XI Pro We have some renamed documents, but other documents link to the old names.  To solve this I created a Word document with the text : OldDoc is now NewDoc.  NewDoc is a hyperlink to NewDoc on the LAN.  I then created a pdf from the Wor