Report on Subject field of Service Desk

Dear all,
In our Solution Manager, we use the Service Desk and in here we use the Subject field to make a distinction between all msgs.
Using the Transaction Monitor, it is possible to filter on the values of this field (section Subject w/ fields Catalog/Code Group/Code), and it the result list it is possible to add these fields as columns. However the value of the Subject field is never shown in the result list. The columns Code/Short Text for Code are always empty, even though when you double click the msg and go into detail mode, a value is assigned to the Subject field.
I heard that this can be normal, and that a link (or something) needs to be established between the fields so that the column in the report will be populated with the correct value.
Anyone who knows how to do this or had the same issue before?
Thanks a lot for your help and any help is highly appreciated!
Best regards,
Roel

Hello Roel,
The implementation you found is the standard...You are adviced to create a new Z implementation....
You can refer the standard implementation to figure out how to develop a new z implementation...
Also the documentation of this BADI gives enough clues as to how this badi can be used and implemented....
i dont have access to systems these days... i could have provided you with the code, if i would have had access to the system....
Inspire ppl by rewarding.....
Regards,
Anand....

Similar Messages

  • Reporting on line pickups for service desk

    Hi,
    I wondered if it's possible to run reports to give me data on how many times a person picks up a particular line.
    We have a very simplified Helpdesk system. One line which is added as a line on the device profile of each service desk agent.
    As the service desk agents are 5 remote locations across Europe, it's impossible for me to know who's picking up.
    I'd like to find some statistics to show me how manys times each person is picking up the service desk line.
    Is this possible? and how?

    WIth your current shared line setup, you can use CDR/CAR (From CUCM -> Cisco Unified Serviceability -> CDR Analysis and Reporting -> CDR -> Search -> By User/Extention).  Select your date criteria keeping in mind that it's in UTC.  Then click the 'view' link in the far right column and you'll find the answering phone device name in the DestDeviceName field.
    It's not quite as cumbersome as that sounds, but this is a fairly limited reporting system - namely the 100 records at a time limitation.  Depending on your call volume, and any other complex needs, you may want to opt for a 'real' CDR system.  There are a number of 3rd party apps (just a few listed here):
    http://www.veramark.com/
    http://syn-apps.com/
    http://2ring.com/tas
    http://splunk-base.splunk.com/apps/25504/splunk-for-cisco-cdr
    If you aren't looking to spend any money and don't want to develop your own CDR app, then you may want to consider replacing the shared line with a hunt group/list.  You'll eliminate the need to drill down into the CMR data (clicking the 'view' link step above) so you'll only have to count the search results unless you want hourly data or something more complex.
    hope that helps,
    will

  • Where to Configure Service Ticket "Reason" & "Subject" field with new value

    Hi Friends - I am working on IC Webclient Service Ticket. I want to Configure the "Reason" field as well as the "Subject" field in Service Ticket with new Values as per our requirement.
    I could not find any Configuration object for the above mentioned customizing in the CRM > SPRO.
    Can you pls guide me where I can configure the same?
    Thanks in advance and warm regards
    Purnendu

    Hi Gert - Thanks a lot for your reply.
    I am using CRM 5.0. I just forgot that Categorization profile can be used for the same.
    I have configured the categorization profile for the same and its working fine.
    One more thing -
    I want to create an Appointment with Customer for problem resolution at the Customer Site. I want to assign Resorces to the Appointment so that the responsible resource is notified and sent to the Customer Site for Visit.
    Can you pls guide me on the same?
    Cheers
    Purnendu
    P.S. - Full reward points awarded.

  • Crystal Reports and Service Desk

    I notice there is some integration between Crystal Report and Service Desk, but I need some assistance on how to get started to create Crystal Reports that will view the Service Desk data.
    Is there any documentationon this functionality?
    Thanks
    Simon

    .

  • Configure Service Desk in SAP Solution Manager

    Hi guys,
    I'm currently trying to configure SAP Service desk to our custumers but i really dont know how much steps i must take to do that.
    Im currently have users from satellite systems generated by tcode BP_GEN in Business Partners.
    But, how it really goes?
    When i using the following site:
    http://ip:8000/sap/bc/webdynpro/sap/ags_workcenter?sap-client=001&sap-language=EN
    which data i must provide to logon on workcenter!
    How can i assign systems from one customer to the user that represents it to, when he logs to the workcenter, he can see the respective system information that belong to him.
    I know that i must provide diferent roles for the administrator  and the users that represent the customer!
    Can anyone give any ideas or a point of direction?
    Regards,
    Filipe

    Hi
    Based upon the BP identification system entries maitained for respective users
    they/Reporter can see only those systems in the list
    Rest is same for all users they have to logon with userid pwd of solman in the URL
    and automatically based upon the roles you have assigned to them in su01 they can see the reporter or processor interface of service desk
    Regards
    Prakhar

  • Service Desk Mail - Modify the subject -adding ticket number and descriptio

    Hello,
    I have activated the automatic sending of email when a new ticket arrives into the Service Desk. I am using the standard notifcation smartform  However all the mails arrive in the inbox with the same subject, so no possibility of making a quick identification of the ticket.
    I heard that is possible to add additional fields in the subject of the mail using some "&" parameters.  However I do not have a clue where to modify and what type of & parameters are available.  Is that I need to copy and modify the smart form somewhere??
    I appreciate your inputs.
    Regards
    Esteban Hartzstein

    Hi Esteban,
    The subject line corresponds to the name of the smart form that you can maintain in the "description" field in the sap form builder. you can add dinamyc parameters to the subject by using the placeholder "&". e.g.: & | Action Required.
    On se24, copy the class CL_DOC_PROCESSING_CRM_ORDER into the customer workspace (ZCL_DOC_PROCESSING_CRM_ORDER). then edit it and navigate to line 185 and change the following:
    REPLACE '&' WITH ls_orderadm_h-object_id INTO ls_output_options- tdtitle.
    Other example to use as subject:
    Object ID + Priority + Description
    Field description value: &1 | &2 | &3
    On the class:
    REPLACE '&1' WITH ls_orderadm_h-object_id INTO ls_output_options- tdtitle.
    REPLACE '&2' WITH ls_activity_h-priority INTO ls_output_options- tdtitle.
    REPLACE '&3' WITH ls_orderadm_h-description INTO ls_output_options- tdtitle.
    More information on this on the book: SAP Solution Manager Service Desk - Functionality and Implementation
    Hope I can help.
    Regards,
    Ricardo

  • Service Desk Message - Sold-to Party and Reported by

    Hi Team,
    The Sold-to Party, Reported by are automatically populated in CRMD_ORDER whenever I create Service Desk Message from Satellite Systems, But when I create Support Message in Solution Manager, these does not get populated.
    Thanks,

    Hi NIshkam ,
    If you are creating the support message from help->create support message in solution manager
    Please check the following
    1. Whether the solution manager is set up in the I-Base in transaction IB52.
    2. Check if your ID is maintained in the identification tab of Business Partner for the    solution manager server.
       (path : transaction- BP -> enter the login ID ->Select change in BP role as Business Partner (Gen.)
                -> Select the Identification tab.)
       your ID should be maintained as below for the solution manager:
    ID Type              System - Installation Number - Client - BP ID
    CRM0001             zzz   - xxxxxxxxxx          -   999  - login ID.
    if these are done then system should be able to recognize the reported by and sold to party.
    if you are using CRMD_ORDER trasnaction for the creation of the support message, then the reported by field, SAP Component field and I-Base are entry fields and are not automated. On entering these and save the reported by , support team and Sold to party will be determined base on your configuration.
    check if this of help,
    regards,
    Srinivas
    Edited by: Srini24 on May 4, 2010 9:06 AM

  • How to add an additional fields in VAR Service Desk?

    Dear ALL,
    I work in VAR company and we use SAP VAR Service Desk. Our Customer has his own HP Service Desk system. When they creates ticket in SAP VAR Service Desk they are allways creates internal Service Desk number in their HP Service Desk. Now they ask us to create the new field named as "Customer SD number". I searched for the invisible fields but nothing found. And I think it should be like:
    1) Field named as "Customer SD number" and the input field for the Customers HP Service Desk Number
    2) Field on the main scrren of Service Desk where is all tickets.
    But this only my assumption, I didn't made like this work before.
    May be there is standard schema? I read the integration, but I can not do this because we have other customers with their own Service Desk systems.
    Please help.

    Dear Ahsan Rizvi
    you have take ABPER help
    Documentation of the FM BAPI_PO_CHANGE says:
    Function module BAPI_PO_CHANGE enables you to change purchase orders. The Change method uses the technology behind the online transaction ME22N.
    As we can insert a new item in the ME22N, it will allow us to insert a new PO Line using this FM.
    Regards,
    shankar

  • Custom report for SLA - service desk

    Hello,
    Untill now we are using solar_eval as our report tool for the SLA functionality in service desk management. But this report does not give all the information we want to have. So do we also like te have the average response times. Does anybody have a custom ABAP-report which we can use ??
    Regards,
    Gert-Jan van Holland

    Thankyou for your reply, but i cannot see any differences in CRM_DNO_MONITOR transaction and that should be shown the product right and i still got my "first respons time and date , completion time and date blank. ? i already activate the action. Please guide me what should i do next, after i activate the action.
    Many thanks
    dinie.

  • Add and remove fields from web service desk

    I want to customize the screen for the web service desk. I would like to remove the fields for processor as well as the field for category. I would like to replace those fields with Geographical Location and Telephone number. How can i do this?

    Hi,
    In REST we cannot pass arrays like this:
    String catRefIds[] = new String[1];
    catRefIds[0] = "12345";
    map.put("catalogRefIds", catRefIds);
    This will never work.
    Had done a similar implementation. The thing I did was, I wrote a logic that accepts comma separated catalogRefIds and converts it to individual catalogRefId and populate the list.
    Regards,
    Rahul

  • Service Desk Report

    Hi Experts,
    Can anyone guide me how can i create standard reports form Solution reporting functionality of solution manager system..
    Thanks
    Suveer

    Hi,
    We are trying to generate report from service desk standard transaction CRM_DNO_MONITOR, But there all other thing are available except first response time & date the values are zero..so can you help me how can i update them..
    thanks
    suveer singh

  • Message creation from Service Desk when Message Processor field is updated

    I want our Service Desk system to create a message to the message processor only after the message processor field is updated. I do not want it to send e-mails when there is a status update. Any ideas?

    Hi,
    You can have the email on status update, but make it partner dependant.so that action will be executed whenever you put bp for processor and save without changing status.
    regards,
    mahantesh

  • Reports For Service desk

    Hi experts,
                  I would like to know the different kind of report that i can use  for service desk reporting .I have used service analysis report directly from the solution_manager transaction,
    but was not able to execute it properly,
           regrads,
                  Varghese

    Hi Varghese,
    At the moment, I am using only CRM_DNO_MONITOR.
    However, I do hear abot BI reports being possible; I raised a query too, but didn't get a reply.
    If you have the time you may like to explore the thread referred in my query [thread|BI Reports for Service Desk - any pointers, insights, experience please!;.
    Regards,
    Srini

  • Service Desk: Support team determination - Action Logs error

    Hello experts,
    I have customized the service desk functionality in Solman 7.0 EHP1 according to SAP help and the various (very helpful blogs from sdn). When I create a message from satelite system the "Support Team" field is already filled with the correct  business partner, but when I look into the ACTIONS tab I see the following error message (red light) "Find support team responsible, when message is created". In the processing log I have the following entries:
    "Processing CRM_DNO_PARTNER_1 Is Started"
    "Action could not be successfully executed".
    Additional no Email is sent to the BP SUpport team even I have customized it accourding to the blog from Tammy Powlas "Service Desk Support Team E-mail Notification".
    When I open the created message in change mode and save the message (without any changes), then the email is sent correctly.
    Can anyone give me a hint, what I did wrong.
    Thanks in advance,
    Thomas

    Hi Thomas,
    When the PDF is generated during the creation of the message, some information is not yet available to the smartform program, so most of the fields are not filled. In order to have the complete PDF, you have to send the e-mail after the document is completely created, which means using the processing time "Processing when saved" (and then you have to open the message and save), or via Job using the Processing time "Processing using selection report", and scheduling the job as mentioned by Cristiano. In this case no e-mail will be created immediately as you wish (I did not use "sent immediately" , but "created immediately", because it also depends on your SCOT job which will send the e-mail). In my case I did not need to send in the e-mail details such as System ID, SAP Component and System details to the Support team, only the message number, priority and description.
    If you decide to schedule the job, create a variant as explained by Cristiano. Enter the Application CRMD_ORDER, Action profile, Action definition if you want to specify which action or actions you want to execute (if you only want to schedule the job for your email to support team action, put this action definition here), Promotion status "0", keep empty field Processing type (do not put INT for e-mail), and select Processing Time "Processing using selection report". Keep dates in blank. Set  "Processing without dialog" on. It's very important that you configure your action to be executed via report, as I said in the beginning, otherwise the job will not work and you will have the "0 actions have been selected" message. Also schedule your job periodically with a very short interval if you have many messages created each hour. It also depends on your SCOT configuration. The CRM action job will only send the e-mails to the queue.
    The business partner assigned to the user that holds the position below the org unit should be entered in the message processor field, but this should not cause any error in the action that determines the Support Team business partner, as this field is correctly determined. Did you configure any other action or BADI to fulfill the message processor automatically? The standard SLFN0001_ADVANCED_FIND_PARTNER action as far as I know will not do it.  I have Solution Manager 7.0 with SP25 and I don't have any error message in the FIND_PARTNER action, it is all green.
    If you did not create yet any action or BADI implementation for the message processor, and if you have only one business partner (person) assigned to your support team, as you described (one Org Unit, with one position and one member), you can do the following:
    - Go to the Access Sequences definition and copy access sequence 0009 (organizational data: employee for an org. unit). In the Individual Accesses change the Source from Department to Support Team.
    - Go to the partner determination procedure and for the SLFN0004 select the access sequence just created.
    This access sequence uses Rule AC10000258 to determine the business partner Employee of an Org Unit.
    Try to create a new message and check if it works. This rule does not work if you have many members below one support team.
    You may also check SAP note [1041455|https://websmp130.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/spn/sapnotes/index2.htm?numm=1041455].
    Regards,
    Raquel
    Edited by: Raquel Cunha on Mar 3, 2011 4:30 PM

  • Service desk: Hide links (queries) in the work center view

    Hi,
    we are using the service desk towards our customers.
    Basically we have to sets of roles: one for consultants (ourselves) and one for our customers.
    Our customers are entering the service desk through a web-interface.
    If the consultants enters the web-interface, they can see reports and queries to the left, and they can open and edit tickets.
    If the customers enters the web-interface, they cannot see queries and reports in the left navigation bar, and they can not open and edit tickets.
    Now we need a third possibility:
    A customer need to open and edit tickets, but they should not be allowed to define (or even execute) queries.
    Because when they can define queries, they get access to see all other customers tickets. And that is not good.
    How to obtain this?
    Thanks a lot in advance.
    / peter

    Based on your comments, I take it that you may not implementing a formal first level support who can perform these tasks as recommended by solman standard. If you are, your customer can request reassignment using their reply option, and the support tech performs the task. You can implement some sort of email notification process to inform the new BP.
    Alternatively, I can suggest two modifications if you have a developer at your disposal:
    1) in your solution manager system, clone the incident create web dynpro to ensure population of the required fields to the customer and to suit your requirement. Here you can also remove the SU15 text id checks.
    2) in your satellite system, modify the function group which triggers the create incident process and have it launch the cloned web dynpro above.
    My apologies, I don't have access to a solman system immediately to give you the exact object names for the above suggestions.
    Cheers,
    P

Maybe you are looking for