Report value and batches

Need to show report which shows stock value and levels on a certain period (previous) by batch numbers.
Report MMBE shows current stock levels per batch.
Report MB5L shows stock value on a certain period (previous) but with no batch information
Is there any standard reports which you can see all stock values and levels for the previous period on batch?
Thanks

yes there is a standard transaction, TCODE : MB5B.
Sharath kumar R

Similar Messages

  • Crystal Reports 9 and SQL Server 2005 default parameter values

    We're using Crystal Reports 9 and upgraded from SQL Server 2000 to SQL Server 2005.
    I'm noticing a very weird problem which I wonder if anyone else has experienced (and hopefully found a resolution for). It appears that in using Crystal with SQL Server 2005 stored procedures, if we have default parameter values in the stored procedures, the default parameter values get completely ignored if you pass in a NULL value from Crystal!
    For example, if you have a stored procedure that begins like this:
    ALTER          Procedure [dbo].[StoredProcedure]
    @Param1 VarChar(200) = '',
    @Param2 VarChar(200) = ''
    AS ...
    both @Param1 and @Param2 have a default value of an empty string, and therefore should become empty strings if nothing (NULL values) gets passed in for them.
    But, like I said, what I'm finding is that with Crystal calling the stored procedure with NULL @Param1 and @Param2 values, they never become empty strings, but rather remain as NULLs.
    This was never a problem with SQL 2000.
    Very perplexing. Anyone else every experience this?
    Thank you.

    Please ignore my earlier post -- answered my own question.
    NULL parameter values do not get replaced by default values in SQL -- that is normal behavior in both SQL 2000 and SQL 2005. Just goes to show, that no many how many years programming experience you have, you can still get tripped up sometimes : (

  • Stock report with value and qauntity for given date not month wise

    Hi gems,
    can any body give me the standard report for Stock value and qauntity for given date not month wise at storage location level

    Hi
    check the report S_P00_07000139 with the option inventory and raw material report- detail and selection date (from, to date same). List will give opening & closing balances with goods movment and their values.
    Thanks

  • Report for total IR value total GR value and Total P.O value

    Is there is any report to get IR value GR value and P.O value as well............?
    i don't need balance i want completed P.O and GR IR value with quantity.......
    Please help me to get this kind of report in SAP
    Thanks
    Neha

    Hi,
    You can find change view option in ME80FN by executing the report and its available near by print and change layout button.
    Click on the change view > select purchase order history.
    You will get the required report then.
    Also you can make the Z enhancement with the help of abapor.
    Thanks & Regards,
    Sandesh Sawant

  • PO reporting that can capture PO number, PO value and cost center

    Dear SAP expert and gurus,
    Would like to seek for your professional advise and consult on which report in MM that can capture the PO number, PO value and cost center.
    Kindly advise.
    Thank you
    Regards
    Leonard Tan

    ME80FN is a good report that captured the PO number and amount. However, the cost center is not being captured here. is there any suggestion?
    ME2K is not an ideal report to user cause, user requires the data to be shown in one line instead of 2 to 3 line.
    Is there any report like ME80FN can be captured PO number, PO value and Cost Center.
    Thank you
    Regards
    Leonard Tan

  • All Inventories Value Report&Inventory Ageing Report& Current And as on Date Stock not matching

    Hello All,
    I am new to inventory. I need some help.
    After opening the periods of purchasing and inventory for the month of April'15. The below reports should match in costing.
    But they are not matching. Kindly help on this as its PROD.
    Inventory Ageing Report
    Current And as on Date Stock Statement With Value Report
    All Inventories Value Report - Average Costing
    Thanks
    RR

    MBEWH is the valuation history, this is only updated with the first movement after a period closure. And the period is a month.
    There is no table in SAP that holds the stock information on daily basis.
    You have to develope this yourself. Easiest method by copying a table like MBEW and MARD  daily to a Z-Table.
    A stock situation  at a certain date can be calculated with MB5B.
    Edited by: Jürgen L. on Aug 5, 2008 4:06 PM

  • Consingment stock report with values and periods..

    hello guys,
    i have an issue here.. consignmet stock are "managed" within SD. Is there a standard report which cointains info about consigment stock, its amounts (values) and periods ?
    Main point here - consingment stock is processed within SD, so for example t.code MB54 is not useful here .
    Thanks guys !
    Best regards,
    Laimonas

    Hi......MB54 wont help since that shows the Vendor consignment stocks.
    Use MB52 creatively like this.
    Goto MB52
    Put your plant name.
    In the section 'Selection : Special stock', Mark the check box and put 'W' in Special Stock indicator.
    Choose the other settings as per your choice.
    Execute.
    Now you will see a whole lot of stocks along wioth the Consignment stocks. If you only want to see the consignment stocks, do like this
    In the list, put you cursor on the column 'S' which is special stock (i think the 4th colm in the list). Now choose the filter icon and put the filter criteria a 'W' i.e. customer consignment stock.
    You can save this is a variant with a name, say /ZCONS.
    Now come back to the initial MB52 screen. In the bottom section for display options, put this variant name in the field Layout.
    So now when you next run the report with this variant, you will only get the customer consignment stocks with their values.
    Hope this helps.

  • SSRS 2008 R2 Report parameters have default values and report not to auto run

    Hi, I am using SSRS 2008 R2 one of my requirements for a Report is all the parameters have default value and I do not want this report to auto run when users open this report. I can create a dummy hidden parameter to break the auto run for this
    report. But I am looking for solutions other than that.
    Thanks in advance..........
    Ione

    Hi lone,
    According to your description, you have a report with parameters. Now you want you report not to run automatically with your parameters default values. Right?
    In Reporting Service, if you have parameters with default values in your report, your report will always auto run with these default values. We can say these default values are used for report running initially. So for your requirement, if you really need
    to see your default value before the report running, the best workaround is set one more parameter to break the auto run like you have done. If you just want your report not to auto run, your can achieve it by removing those default values.
    Reference:
    Report Parameters (Report Builder and SSRS)
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou (Pactera)

  • Report with goods receipt value and invoice posting value

    Is there any standard report with goods receipt value and invoice value (the value with which invoice is posted.

    Hi
    Please check MC$4 transaction, mey be helpful.
    regards
    Srinivas

  • Report on OA target value and net value

    Hi all,
    Is there any standard report that can list out the target value and net value of a number of OA?  The values are similar to ME33K -> Header -> Statistics -> General.  Thanks.

    Thanks all. I had found the answer.  It should be transaction ME3L, change layout to select "Released value" and mark the column to show total value.

  • No Target values and Ratiings displayeed in SL report

    Hi ,
    I have configured Service level reporting for R3 system in solution manager, in Key perfromance indicatiors node->target KPI TAb->i have provided teh target values for the KPI's.
    The report is generating every week, but in the report for KPI section, i m missing the target values and the ratings in  my generated report.
    Area  Indicator  Actual Value  Target value  Rating  Trend
    In the above columns i dont see any data/values under target value and rating , though i have already maintained this in set up SL reporting
    Anand

    Hi Solman Gurus,
    Can anyone provide any inputs please
    Anand

  • Display Report Level Filter value and Input Controls Value

    Hi,
    Please let me know how to display Report Level Filter value and Input COntrol values in the report.
    I have 2 tabs in the WebI Report. The first tab has the summary details about the other tabs like reprot desc, prompt values, reprot filter values,etc.
    In the 2nd tab I have the actual report which has input controls defined, prompt values and global level report filters.
    Can anyone please tell me how to display the Report level filter values and the Input Control values in the first tab report.
    For ex: Tab 2 has a Report level filter: Region = NA
    I need to display in Tab 1 in as Region: NA
    I used the function ReportFilterSummary but that is giving me other details, I want only the object name and the value.
    Also how to dispaly the Input Control values in the tab 1.
    Please let me know if you have any suggestions for this issue.
    Thanks

    did you try
    =ReportFilter([Year])
    if you are making report filter over the year, it will return the value of the filter
    by the way, the filter should be applied over all the report not to a specific block to be able to get the correct value
    the Input control also considered as report filter, only if you're applying them on the level of the report, if you applying an input contron over a specific block or chart, you will not get the values for ReportFilter
    good luck

  • Standard report which can show the  details of Invoice value and PO value

    Hi all,
    Is there any  standard report which can show the  details of Invoice value  is more than 5% of PO value. MIRO value and PO value.
    If any report which caters the maximum requirement is also fine
    Regards
    Sanjith
    Edited by: Sanjith Sethu Lekha on Dec 6, 2011 2:42 PM

    Hi
    Please refer the below mentioned link
    /thread/1789934 [original link is broken]
    Regards
    Praveen P C

  • PM Notification: User-Define Values for Reported By and Tech Inspected by

    Hi Friends,
    My user wants the name to be filled in the field Reported by and Tech inspected by in the Notification Should be from a dropdown list.
    Please suggest some solution, any customer exit or user exit.
    Regards
    Pankaj Verma

    Programmer used field validation in IW21/IW22, IW31/IW32 screen for that functionality.
    Sorry, I don't have code or specific enhancement names. All I can say is that after enhancement, it worked very well.
    Thanks-

  • Stock on posting date -storage location and batch wise

    Dear All
    I need to developa report exactly same as MB5B but with storage location and batch wise.
    We need  storage location wise opening stock, total receipts, total issues and closing stock, and values for given time period.
    I have gone through some history tables like MCHBH and MBEWH.
    But all the history tables are having fileds for period wise but not date wise.
    Any focus on this?

    You have to read the coding of MB5B to see how SAP is doing it.
    The stock per date is calculated, starting from a month end, adding or reducing quantities based on movements until the date in question is reached.

Maybe you are looking for