Reports for several projects

Hi,
I developed some reports to show the distribution of resources against duration. Previously, I used the output as ASCII text file and then make an Excel spreadsheet / histogram with the results.
Scenario is:
1- I have several projects which I want to report the distro. of resources on
2- I want to show the distro. of qty. against duration sorted by projects in the same report, i.e. currently the units are shown as 1 single row / month summed for all open projects
Is it possible?
Regards,
Karim

In P6, Under Reports, I look under the "Open Projects" heading, and then "Resource Usage", I start with the canned report RL-06. This is a weekly report, but you only need to adjust the timescale to show daily instead of weekly. In the Report Wizard, not Report Editor, Under the "Group and Sort" Button, it should give you the option to group by "Project" (no "S"). This should fix your issue.

Similar Messages

Project Report for One Project Using Excel

Hi,
Is is possible to create a report for one project using excel?
I want to create a pdp with an Excel Viewer web part and have the following tabs with data specific to the one project.
1. Cover
2. Issues
3. Risks
4. Deliverables
I tried passing the ProjUid to an Excel doc via the Excel Query Filter Web Part and was able to filter the Issues lists only but don't know if its possible to filter out the other tabs by using the same paramater. Is this possible?
I have not looked at Odata but was wondering if it was possible to pass a paramater to the odata query and still have the spreadsheet work in a web view in SharePoint?

Hi,
I'd say that as far as you promote the Proj UID field as a filter in all sheets of your Excel workbook, using the Excel
Query Filter Web Part should work fine. But testing it should be easy, since you already did half of the work.
See excellent article from Andrew on this topic:
http://azlav.umtblog.com/2012/12/05/filtering-excel-webparts-in-office-365-part-2/
http://azlav.umtblog.com/2012/07/03/creating-a-project-resource-list-in-a-pdp/
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

Would it be possible to have 2 shared resources, one local containing all common topics and pictures for several projects, and another one remote containing all topics and pictures for collaboration purposes

Hi,
I was wondering, now that I discovered the advantages of Resource Manger, if it would be possible to have 2 shared resources, one local with common topics and pictures for several projects, and another one, remote, containing the whole projects, i.e. topics and pictures, for collaboration purposes.
The local one I intend to use it for my purposes to have common items (topics & pictures) updated in all projects where they appear, and the remote one I intend to use it together with my remote colleagues that might want to do changes in the topics.
This would mean that the common topics and pictures would be present in both resources, the local one as well as the remote one.
Thank you.

Thank you for your fast answer Rick.
I was merely wondering if it would be possible w/o having to use other products outside RoboHelp.
We are already using svn for a lot of other purposes and we are using that for the RoboHelp projects as well, however I was wondering if it would not be possible to have RoboHelp take care of the RoboHelp projects, and with svn to take care of the other things in the company.
Eventually, if it would be possible, I would think to sync all the local projects with the remote projects, then sync the local project with the local shared resources, and at the end sync the rest of the projects with the local shared resources.

SD report for school project

Hi Experts,
Please may I get some guidance, I have a course work project as I am studying BW and I need to produce a report for a SD case. The report needs to show the following:
Characteristics
Sales Organization
Delivery Date (From/To)
Shipping Point
Sales District
Vehicle Route
Vendor/haulier
Key Figures
Delivered Qty (Volume)
Delivered Qty (Weight)
Delivered Qty (SKU)
Shipment Cost Value
I am taking the following steps to find the above:
1. In R/3 > SD look at datasources to find the fields required.
2. Once datasources have been identified to transfer to BW and activate the business content
3. Identify the cubes used by the datasource (AWB>Infosource and look at dataflow for the datasources I found containing required fields).
For any GAP analysis identified I will provide field, table and user exit for ABAP programmer.
Are these the correct steps? Have I missed anything? Also could someone please provide a template document I can use to write up the requirements as a blue print?
Thanks for your help in advance, I will award points for help.
Vic Kumar Manni

Yes thank you, I was looking at all the datasources in SD so thanks for point me to these ones.
As a starting point is it helful to look at Christopher Solomon tables and check for fields in SE11?
Also, any tips for report layout/ blue print?
Thanks,
Vic
Edited by: vic manni on May 27, 2008 6:02 PM

Cost report for the project

Hi,
Which report will show the material cost, Equipment cost, Resources cost & Activity cost for the Project.
Prashant

Hi,
If you need actual cost, then CJI3 should be OK.
Kind regards, Aleksandra

Running a report for several inputs

I have to run a report and email the output for several inputs say around 60. what would be the best way of doing it.

Hi,
Write two programs...
In the first program ..create an internal table with input data and loop that internal table and within the loop call the second program which sends a mail with the input data as selection screen. It may work...
Regards,
Jayaram...

Profit & loss reports for a project in PS

Hi,
does anybody know how to calculate profit & loss for a project and which reports show this?
Thanks
Long

Hi,
I run OPUR and saw some entries there, but while while selecting the the database profile for that particular report I don't know how to "go to change DB Profile"
can you show me step by step to to this
Thank you
Long nguyen

Report for invoices project wise

Hello All,
I need a report where I can see the invoices project wise i.e (PS module and SD module)
I am looking for invoices details project wise is there any standard report which I can check that how many invoices have been raised for a particular project or a particular sales order.
Thanks in advance,
Priya

Hi
You are not getting the fields in FBL5N or not getting the value in them?
If you are not gettng the fields,
1. Go to SM30 - Table V_T021S...
2. Include BSEG-FIelds Sales Order and WBS Element as special fields
3. Generate the transport request and transport it to PRD
4. Execute SE38 - RFPOSXEXTEND in PRD client
Now when you execute the report, it should show you those fields..
BR,Ajay M

Report for each project from sales order

Hi All,
I am creating a project network from sales order.
Now i want a report from the sales order showing what is invoiced and the balance in each line item for the sales order.
Is there any standard report available.
Thanks in advance.
Amit

Dear Amit,
I think S_ALR_87013564 report will help u.
plz check.
Regards
Lallan

Reports for MM/Projects/PM

Hi Sap Gurus
Please help i would like to get a report that will show me PR number/ PO number/ Priject spent per plant
our company is a manufacturing industry, they have new projects erc
Regards
Susan

Hi
Check PR Report of ME5A with dyanamic selection where you can see the PR & PO Details
Regards
Rajesh Dalal

Report assignments in COPA report for several years

Hello
I have a COPA report, which contains of data for 2 or more years.
I have setup a report assignment, so it is possible to step into a FI document from the 'Ref doc number' characteristic in the report. Unortunately it does not always finds the right document if I haven't first drilled down on 'Fiscal year' in the report.
Does anybody know, whether it is possible to avoid and instead alway find the document in the right year?
Best regards
Søren Kirch
LOGSTOR A/S

Hi Vivek,
KE30 is a Transaction code. If you want to copy a Report associated with this Transaction code then go to transaction code KE30 Provide the data a initial screen. Then go to Utilities->status. A popup screen will be displayed. In SAP data tab There is a field called Program. Copy that program name & go to transaction code SE80 & provide the program name & go for display. Here all the related screens, fields, tables etc. will be displayed then right click on the program name & select copy & provide the target program name starting from Z. Save & activate it.
Note you can copy the standard program & copy it also but I think it will not take place the standard porgram, you will have to run the progam manually.
I think BADI or BTE may be available for this transaction.
Ashven

Time Machine - Need central reporting for several macs.

several mac's on a network all backing up to a network Hard drive, now I need centralized reporting to make everyone happy.

Install OS X Server and activate the Time Machine service.

Working on pages in 1 Library, but for several projects (different targets)

Hi guys,
I'm a designer in a developer-team, actually we give Flex, FlashBuilder and FlashCatalyst a big try.
Goal:
to make one application / service, with same Webservices and components,
for different mobile devices, as AIR-Application and for probably for websites too.
Problem (short):
When i work with FXPL (Library), i cannot work on the different user-interfaces for each device/AIR. I can only work on the components itself, but not on the full software-interface.
Problem (in detail):
As an FXP (Design and Code in same project) its easy to work on all User-Interfaces(States). But as we have different targets - such as iPad, Android-phones and AIR-Application - i need to work with a Library to keep all components in same version, without editing 3 or more projects with same changes.
So, how to work not just on the single components itself (example: a login-form) but also on the complete user-interface (with its headers, navigation, transitions and all this stuff) in Flash Catalyst (while working with a Library) ??
Example:
A complex interface got 3 new components, which are already build & designed. I, as the designer, want to place & align them and maybe working on details. But in Flash Catalyst i cannot get the full-view of the user-interface (for each device / target).
My idea for a work-around:
Instead of working with the primary states (which is not possible with the library) i create something like an over-all-component for each view. So i can work on the single components (like child-parts of the main-user-interface), i can align them and work on them with states too.
In this case i need to make all these components three times (for ipad, android-phones and AIR app),
so: i can work on any user-interface for every target in flash catalyst, instead of just working on the components!
but: at end of day i get alot of "components" which are just placeholders for states, views or component-groups.
- Is there any better workflow yet with librarys & different targets (working on all interfaces)?
- Didn't i see a critical point about my idea for a work-around ?
///// SoftwareDetails:
We work with FlashCatalyst CS 5.5 (1.5.0) and FlashBuilder 4.5 (4.5.1)

The basic idea is sound, however none of the components in Flash Catalyst are mobile friendly, nor is any of the skinning that it does. For that reason I would recommend not incorporating Flash Catalyst into any real mobile projects. It is fine to mock up a prototype, but nothing will deploy or run well on device.
I hope this mobile issue is addressed in a future version.
Chris Griffith

Generating size report for Flex project

How do I do this? I would like to see a breakdown of asset
and code sizes like the one shown in Flash when "generate size
report" is selected...thanks!

Not that I would recommend this in most case's but if the
PDF's do not need to be dynamic you could use something like PDF995
and send your page to it as a formatted print job. I had a client
that wanted printouts from Filemaker in PDF so they could Email
them to a list. Had to be automated so we just set up a print
script in filemaker to print to a PDF converter. Don't think it was
actually PDF995 and I do not remember what it was but I mention
PDF995 because I use it at home. You just need something where the
API allows you to specify the location to save too and the name of
the file as part of the printjob. Send the files to a standard
location on your server and trap the name of the file in a
database. Bingo. Easy PDF's.
Of course the alternate option is to auto generate your chart
as a web viewable formatted for print version. As it changes notify
your users with an email link of where to view it and then let them
print their own PDF using PDF995 or other such utilities if they
want to.
And then get back to the Game of Half-Life2 Death Match going
on in the server room.

Report: user/systems status with change details for a project

HI.
I am aware of CN41N/CN43N transaction.
Is there a way to pull a report for a project with system status, user status and the details of who made the changes with date and time???
thanka a lot in advance
Regards
SURYA

Hi
If you have change documents active for status management and project profile then you can get the data from JCDS table directly (changed status and who changed it). Note that you will get the status in SAP internal code and you need to refer TCJ30 table for status.

Reports for several projects

Similar Messages

Maybe you are looking for