Request MDX syntax for BOE XI3.0 and SAP BI7

Hi,
Does anyone know that where I can find a document to specify the MDX syntax that can be used for BOE XI3.0 and SAP BI7?
I found a related topic on:
Resources for customizing SAP Universe objects with MDX
But after go through the above thread, the feeling is that we can only get the answer by testing each of the syntax.
Could anyone share any ideas to this topic?
Thanks and regards
nora

Hi Ingo,
Here is the example that customer gave:
Per you request, a real example. The following objects were created,
when an universe was set up against a BEx Query:
Notation A: [0LOCNOTA].[LEVEL01].[20LOCNOTA].[Value]
Notation B: [0LOCNOTB].[LEVEL01].[20LOCNOTB].[Value]
Notation C: [0LOCNOTC].[LEVEL01].[20LOCNOTC].[Value]
Notation D: [0LOCNOTD].[LEVEL01].[20LOCNOTD].[Value]
User Status: [0LOCUSTA].[LEVEL01].[20LOCUSTA].[Value]
Want to be able to create an object, CFact, defined in the universe as
(shown in Oracle syntax here, but of course we have a SAP OLAP
universe thus our request for a MDX syntax for BO and SAP BW/BEx Query):
decode([0LOCNOTA].[LEVEL01].[20LOCNOTA].[Value],'Y','FAIL;','')
||decode([0LOCNOTB].[LEVEL01].[20LOCNOTB].[Value],'Y','CDMN;','')
||decode([0LOCNOTC].[LEVEL01].[20LOCNOTC].[Value],'Y','BSFR;','')
||decode([0LOCNOTD].[LEVEL01].[20LOCNOTD].[Value],'Y','ERR;','')
||substr([0LOCUSTA].[LEVEL01].[20LOCUSTA].[Value],1,4)
Say, if values for the objects are 'Y', 'N', 'Y', 'N',
and 'INACESSIBLE', respectively, CFact would have the data
FAIL;BSFR;INAC
Hope the above provides you with enough detail.
thanks and regards
nora

Similar Messages

What is the SYNTAX for the user and group filters??? Is the HTML Ampersand token Amper A m p semicolon required in the filter

There seems to be quite a bit of confusion over the actual syntax for the user and group filters on the Forms Based Authentication Ldap Role and membership providers.. MSFT isn't really clear and there is a universal confusion in the blogsphere.
I the filters should the prefix be the ACTUAL Ampersand or the HTML token for an AMPERSAND.. I realize the in many cases the blogger might have inadvertently specified the html token when the bare naked ampersand was intended.. The question
therefore is : can a filter be taken directly from and ADSIEdit query and used as a filter or must the filter be made HTML safe by swapping out the AMERSAND with the HTML Token for AMERSAND before putting it into the configuration
for the LDAPRole/membership provider...
All science is either physics or stamp collecting

Hi GUYO,
I am not quite sure how we implement this on sharepoint side, as I did research and sharepoint may not have this feature to do this.
most of the LDAP for sharepoint may need to follow these steps in this article:
http://technet.microsoft.com/en-us/library/ee806890(v=office.15).aspx
http://blogs.msdn.com/b/sridhara/archive/2010/01/07/setting-up-fba-claims-in-sharepoint-2010-with-active-directory-membership-provider.aspxhttp://blogs.msdn.com/b/kaevans/archive/2013/01/31/configuring-ldap-for-fba-in-sharepoint-2010-or-sharepoint-2013-with-powershell.aspx
here is an example :
http://blogs.msdn.com/b/sharepoint__cloud/archive/2011/12/20/achieving-fba-with-adlds-amp-sharepoint-2010.aspx
if should this questions was at the ADSIEdit part, perhaps you can help us by opening a new thread at the AD foum
https://social.technet.microsoft.com/Forums/en-US/home?category=windowsserver
Regards,
Aries
Microsoft Online Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Integration for Business Workflow and SAP Interactive forms by Adobe

Hi
Is any of you able to watch the following SDN eLearning Session ?
<i>Integration for Business Workflow and SAP Interactive forms by Adobe (RIG session 7)</i>
I can play nearly all the other eBooks, but not this one. Any idea ???
Regards, bernhard

I solved the problem.
It is not possible to view the ebook with IE 7.0. So I removed the new Internet Explorer and everythink is working fine.
Greetings, Bernhard

Only HTTPS requests are working for SOAP Sender and HTTP not working

wHi Experts,
We have enabled our HTTPS port ( SSL ) in NWA -- >> Security -- >> SSL and Key stores. So understanding is HTTPS port is now enabled on top of HTTP. So PI should be able to cater requests at both ports.
Now, we have developed a synchronous SOAP to RFC scenario and downloaded WSDL file. This file has both links -
a. http:<host>:<port>
b. https:<host>:<port>
We intend to make a PI system where both ports can work. Now questions.
1. When we test web service exposed from PI using SOAPUI tool, only HTTPS works fine and gets the response back. If we try HTTP URL, an error is encountered - HTTTPS scheme is required.
2. Is this whole understanding that both ports ( HTTP, HTTPS ) should be able to operate simultaneously correct ? Or this is not at all possible ?
3. In SOAP Sender, we tried selecting all 3 options - 1. HTTP 2. HTTPS without client authentication 3. HTTPS with client authentication.
None of the options have any effect on testing, Each time, only HTTPS request works and HTTP doesn't.
Can anyone please provide some hints for troubleshooting ?
Thanks..
regards,
Rajagopal.

The error "HTTPS scheme is required" is normally returned when the HTTP Security Level on the SOAP adapter is not set to "HTTP". I can see you have mentioned you have tried all these, maybe a cache refresh has gone wrong? Could try recreating the channel with just HTTP specified as security level and this should allow HTTP or HTTPS
I assume you are using a different port number for your HTTP and HTTPS requests from SOAP UI. Normally the HTTPS port is the same as the HTTP port number but the final zero changed to a 1 i.e. https://<host>:50001 instead of http://<host>:50000.
You should be able to confirm both HTTP and HTTPS work OK by loading some of the system webpages in a browser over HTTP and over HTTPS i.e. http://<host>:<port>/nwa and https://<host>:<port>/nwa
Chris

Best practice approach for seperating Database and SAP servers

Hi,
I am looking for a best practice approach/strategy for setting up a distributed SAP landscape i.e separating the database and sap servers. If anyone has some strategies to share.
Thanks very much

I can imagine the most easiest way:
Install a dialog instance on a new server and make sure it can connect nicely to the database. Then shut down the CI on the database server, copy the profiles (and adapt them) and start your CI on the new server. If that doesn't work at the first time you can always restart the CI on the database server again.
Markus

Security Requirements Template for BOE XI3.1

I'm looking for the "Security Requirements Template" document, a template that can be used to setup a content plan in BOE XI3.1.
It is an Excel document, that shows by application the possible rights.

Hans - you're probably referring to Dwayne Hoffpauir's 2008 GBN User Conference presentation - it's really helped me set up our security for XI 3.1.
http://www.forumtopics.com/busobj/viewtopic.php?t=119849&highlight=mere+mortals

Whats the difference for Technology Consultant for Web AS and SAP IT Excel

Hi all,
I would be going for SAP Web AS Certification.
I found two similar certifications
1) SAP IT Excellence Certification
SAP IT Excellence Web AS Administrator for Oracle
URL :
https://websmp108.sap-ag.de/~sapidp/011000358700006422322006E
2) SAP Consultant Certification
Technology Consultant SAP NetWeaver 04 SAP Web AS for ORACLE
URL
https://websmp108.sap-ag.de/~sapidp/011000358700000210952005E
The course contents for both the certificatiosn are very similar. So I would like to know whats the difference between the two certifications and as an SAP basis administrator which one should I go for ?
Thanks.
Sandeep.

Hello Sandeep,
this forum is about software product certification and not consultant certification.
Please post your question in the Forum: SAP Certified Professionals
SAP Certification
To start getting a SAP certified consultant please have a look at this page:
http://www.sap.com/services/education/
On this page look for "User Education" and "Certification Program" on the left navigation column.
You first need to select your country location below and then get in contact with the responsible person within your country to apply for the education or certification program.
Hope this information was useful for you.
Have fun,
Juergen

Teradata and SAP BI7.3 Connection

Hi experts,
I have requirement to extract data from Teradata to SAP BI7.3, I have gone through some of the links in SDN which was suggest to go for UD connection with JDBC
1.In SAP BI7.3 is there any other way of connecting Teradata ( As all links referred to old version i.e BW3.5 and UD Connector)
2.Does any body have step by step document,
3.What are the Pros and Cons of using UD connector? Can I use DB connector ? and which is the best possible way to get data from Teradata.
Thanks and regards
Sri

Hello
You need to deploy the JDBC drivers for Teradata
Once done you need to create a connection string in the Java stack under the Connector Container.
There is a document available on the Teradata site with the complete steps.
The procedure is same like for other databases. Follow that
How to use the Teradata JDBC Driver with SAP
Regards
RB

BOE XI and SAP BW

I have just installed the BusinessObject Enterprise XI 3.1 on the server. I have tested and confirm can logon to the BusinessObjects XI Central Management Console. It seem like all working fine.
Now I would like to apply the BusinessObject Enterprise XI 3.1 SP2.
During the installation of SP2, there is screen prompts ask for CMS Hostname, Port, and CMS Administrator password.
1) Do you know where can we obtain this information?
2) I donu2019t recall to have this (CMS related) screen appear during the BusinessObjects XI 3.1 installation. Where is this CMS in BOE XI
3.1? Should I create it after the BOE XI 3.1 installation?
3) If yes, how?
At the end of the installation, we would like to integrate with SAP BW. Will have more questions...
Please help.
Edited by: lynn on Mar 5, 2010 12:20 AM

Hi,
I have just installed the BusinessObject Enterprise XI 3.1 on the server. I have tested and confirm can logon to the BusinessObjects XI Central Management Console. It seem like all working fine.
Now I would like to apply the BusinessObject Enterprise XI 3.1 SP2.
During the installation of SP2, there is screen prompts ask for CMS Hostname, Port, and CMS Administrator password.
1) Do you know where can we obtain this information?
this is your system name from the BusinessObjects server. You can also call the central configuration manager and in the topic right corner you should see the name - assuming single server deployment.
Ingo

MDX syntax for current year in a Pre-defined condition

Hi,
I'm looking for assistance in building a Pre-defined condition in a universe based on an MSAS 2005 OLAP cube, that only returns the current year.
My year is defined as [Time Accounting].[Accounting].[Accounting Year]
I can create a Pre-defined filter that accepts a constant value as follows:
<FILTER KEY="[Time Accounting].[Accounting].[Accounting Year]">
     <CONDITION OPERATORCONDITION="Equal">
          <CONSTANT CAPTION="2008"/>
     </CONDITION>
</FILTER>
and it works fine, however, I would like to make it dynamic.
There is an attribute called current year that is defined as [Time Accounting].[Accounting Year].[Accounting Year].[Current Year].[Value] but when I try and put this into my pre-defined filter nothing is returned:
<FILTER KEY="[Time Accounting].[Accounting].[Accounting Year]">
     <CONDITION OPERATORCONDITION="Equal">
          <CONSTANT CAPTION="[Time Accounting].[Accounting Year].[Accounting Year].[Current Year].[Value]"/>
     </CONDITION>
</FILTER>
Is this possible? What am I doing wrong?
What I'm ultimately aiming for is a rolling 12 month condition.
Thanks,
Colin

Hi,
In OLAP universe, you cannot define a filter with CAPTION = another universe object.
What you can do is CAPTION = String or CAPTION = @Prompt.
By the way, if you want to achieve what you are requiring, I suggest you create a calculate expression such as:
<EXPRESSION>
IIF([Time Accounting].[Accounting Year.].CurrentMember.Properties("Name") = [Time Accounting].[Accounting Year.].CurrentMember.Properties("Current Year"), 1, 0)
</EXPRESSION>
Then you can define your filter on your new calculated expression and the operator to Equal and CAPTION = 1
Didier

Syntax for logical OR,AND and not equal to

Hi All,
In the rtf template we are in need of using logical OR,AND and not equal to .
<?choose:?><?when:(M= 0 & N=1) | (M= 1 & N=0)?>
<?end when?>
<?choose:?><?when:(M!= 0 & N=!1)?>
<?end when?>
<?otherwise:?><?end otherwise?><?end choose?>
Is the syntax used above is correct?
Thanks in Advance

Hi,
Been a while since I look at this sort of thing, but from what I can remember, here goes:
When you specify an element name in your XML you are actually specifying some XPath. This means you need to use XPath syntax in your <?when....?> clause.
I think you would need to re-write your statements as follows:
<?choose:?>
<?when:(M=0 and N=1) or (M=1 and N=0)?>
<? end when?>
<?when:not(M=0 and N=1)?>
<?end when?>
<?otherwise:?>
<?end otherwise?>
<?end choose?>
I hope this helps you.
Regards,
Cj

Bex Patch level for Windows 7 and SAP GUI 710

Hi,
We have the machine with following config:
O.S - Windows 7
SAP GUI - 710
MS Office 2007
When a user logs into Bex Analayzer, clicks on Add-ins he gets an error message in German.
Same kind of problem was encountered with Office 2003, but MS fix 907417 solved the problem.
But i am not able to find any such fix for Office 2007.
Can anyone tell me what should be the patch level of Bex in this case?

Hi,
What is the exact error message you are getting?
Thanks
Riyez

Syntax for HEADER BODY and FOOTER

Hi
My Header and Footer is bit complex, involves many fields and quite long so I have decided to code Header in main body area.
I guess I can do spmething like;
<?start:HEADER?>....<?end:header?>
<?start:BODy?>....<?end:BODY?>
<?start:FOOTER?>....<?end:FOOTER?>
Not sure this correct. Please can any one put me in right direction to achive this??
I would appreciate your help on this.
Thanks and regards

do the following anywhere in the body section of your template
<?template: Header?>
create your complex header here
<?end template?>
<?template: Footer?>
create your complex footer here
<?end template?>
Then in MS word, select the header section and put in the following syntax
<?Call: Header?>
similarly in the footer
<?Call: Footer?>
youre done! .. no need to use start body and end body tags..

Syntax for Resize page and center artwork EPS

Hi,
Does anyone know the correct syntax and where to add "Resize page and center artwork EPS file" in name.joboptions file? I've tried adding "/ResizePagecenterEPSfile true" but it doesn't work. Couldn't find it any where in Adobe's document.
thanks

Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages
See also:
*http://kb.mozillazine.org/Corrupt_localstore.rdf

B1TCH (DIC tools ) for SQL 2008 and SAP b1 8,81

Hi
In the past , I used B1TCH tools for updating fileds in jurnal entry with SQL 2005 and also B1 2007 verion.
but now I cannot use it with SQL 2008
is there any comment?
Thanks

Try: Get Your Kicks with DI Commander

Request MDX syntax for BOE XI3.0 and SAP BI7

Similar Messages

Maybe you are looking for