Restore fails on gasgauge_swupdate failed: -1
Restore seems to go mostly fine - then fails. In the logs, last status update is:
gasgauge_swupdate failed: -1
Any ideas?
Here is the rman script used to restore the database:
export ORACLE_SID=ghdb
rman
SET DBID=77718000123
CONNECT TARGET /
STARTUP NOMOUNT PFILE='/oracle/admin/pfile/initghdb.ora';
RUN {
ALLOCATE CHANNEL c_1 TYPE 'SBT_TAPE' PARMS "ENV=(NB_ORA_SERV=server01.domain.com)";
RESTORE CONTROLFILE FROM AUTOBACKUP MAXSEQ 3 UNTIL TIME "TO_DATE('20121109', 'YYYYMMDD')";
-- After the control file is restored, then the following is run:
MOUNT DATABASE;
RUN {
ALLOCATE CHANNEL c_1 TYPE 'SBT_TAPE';
SEND 'NB_ORA_CLIENT=server01.domain.com,NB_ORA_SERV=ghmaster.domain.com';
RESTORE DATABASE;
RECOVER DATABASE;
RELEASE CHANNEL c_1;
Edited by: Gensis2001 on Nov 12, 2012 10:07 AM
Similar Messages
-
My IPhone is set up with an internet downloaded firmware of ios7 because my phone would not restore, the system has failed and I had to do a manual erase fro within the phone. My computer will not accept the phone because they say it's a "Developer?" Help. I cannot not even get passed the activation step on the computer or phone because it will not activate the device.
Hello buddyacw
You would have to restore the iPhone. Download the latest version of iTunes and then follow the steps in the article below to get it working again.
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
i have got an iphone 3g and when i got it it was jailbroken so i went to restore it but it failed now it says i need to plug it into itunes all the time. what do i do?
Kidcomeleon wrote:
i have got an iphone 3g and when i got it it was jailbroken so i went to restore it but it failed now it says i need to plug it into itunes all the time. what do i do?
Plug it into iTunes. -
my daughter has not used her ipod touch for 16 months and has forgotten her passcode. restore factory settings keeps failing due to a software update failure!
how can i get this ipod reset. She now has an iphone so this is going to be used by someone else in the family and should be simple to do but itunes just keeps booting it out even though it recognises that it was previously connected to our itunes account as all of the children were on my accountThat has nothing to do with an update server. Do the following:
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes -
Full restore from Time Machine fails what now!
Just upgraded to 10.8 and all was fine except on crucial pice of software that was supposed to work in 10.8 but didn't.
I tried to revert back to 10.6 via full restore but it failed. Now I just tried to restore from TM backup of the 10.8 restore point.
It fails too. All my HDs check out fine. What went wrong and how can I get back to working?Melnibonean wrote:
When I try to run a full restore from Time Machine it comes up with an error saying the restore failed. No useful information like codes or reasons are given.
It's possible that as the HD was failing, it corrupted something in your installation of OSX, and that was backed-up, so when you restore it, you're restoring damaged items.
Try again, but pick an earlier backup, from before the problems started.
When you do, once it starts, select Window, then +Show Log+ and +Show All logs+ from the menubar. Watch the messages; if it fails again, note what it says. That will tell us, roughly, where it was, so we may be able to avoid it.
Currently I have 10.5.0 installed. I have to install 10.4, then upgrade, which is a very lengthy process.
Huh? Why would you install Tiger?
How should I proceed? Is there a way of repairing the backup?
Possibly, depending on what's wrong.
Instead of selecting +Restore System from Backup+ from the Utilities menu, select +Disk Utility+ and use it to do a +*Repair Disk+* on the backups (via your Leopard Install disc). Then quit DU and try +Restore System from Backups.+
I have no way of using the Migration feature since I only have the one Mac.
Yes, you do, if the backups are ok. You can use +Setup Assistant+ or +Migration Assistant+ from your backups (or a clone), not just another Mac. But they both only use the most recent backup, which may be damaged, so try the full restore first. -
i have tried to update my i.phn 3g from 4.1 to 4.2 but it failed and then i tried to restore then its also failed,,now my device is not working,,,can somebody help me?????
No one can help you without knowing the error message and error number when it fails.
-
i have bought an iphone 3gs on ebay it worked with my sim but had last users pics numbers ect, so i restored it butb its failed and now all i get is connect to i tunes but will not restore ????
Have latest version of iTunes installed and running. Also make sure you have internet access working and can access Apple websites. Also, make sure you don't have any entries in your hosts file referring to gs.apple.com....If your not sure about how to do that, go ahead and do the rest first. You can come back to that later.....Plug in phone. Put phone in DFU mode.(google put iphone in DFU mode for instructions) Then restore the phone in iTunes by highliting your device in the left column and click on the Restore button. The latest iOS version is 4.3.3. That's what iTunes will restore it to. When it's done restoring, iTunes will ask if you want to restore from a backup or setup as a new phone. I would use the Setup as a New Phone option. Once it's done, you should have a clean install of the iOS and an operating phone, as long as there are no hardware issues with it.
-
Just tried to update iPhone 4S to 6.1 and it first of all failed to back up then it failed to update (Error 11) so i had to put it in recovery mode and restore it then it failed to restore with an unknown error starting to think its an itunes issue does anyone have any advice?
if your computer is not recognizing it, try using a different USB port or different usb cable. if that doesnt work you will need to uninstall and reinstall itunes.
-
When restoring backup catalog conversion fails.
when restoring backup catalog conversion fails.
HI,
Could you please try the steps mentioned on the link http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-catalog-backup-conversion-elemen ts.html
-Harshit yadav -
I cant restore iphone so i can use as an ipod touch. Itunes sees device, but I cant restore. DFU mode fails as well. It acts like it's restoring but after verification, i still am back at square one.
When restoreing There is an n/a after capacity and serial number etc. After restore it restarts and recognizes device bu has iphone in large print in the window wher Capacity and serial number were. Any help would be appreciated.
-
Apple TV restoring to factory condition failed problem
I was watching my Apple TV (1st Generation) and sudenly it freezes, so I unplugged it. When I plugged again it appears the logo and the language selection, but then the logo is appearing and appearing. I'm trying to restore to factory settings but it keeps saying restoring to factory condition failed. Any advise?
here I found !!!
Restore AppleTV OS after erasing disk, download and restore via USB pen the AppleTV Restore Image:
http://www.tweaking4all.com/home-theatre/appletv/restore-appletv-os-offline-1stg en/
http://wiki.openelec.tv/index.php?title=Restoring_the_Apple_OS
It works, I have now back my Apple TV G1 ! -
I want to grant permissions to all domain users to view reports on our Report Server. Domain users are able to access our Report Server URL and folder, but when they click on a report item they get an error message:
"Cannot open database "ReportServer" requested by the login. The login failed. Login failed for user 'USER LOGON'"
I'm using windows authentication and configured the local service account in SSReportS Config Manager as the credentials to connect to the Report Server DB.
Can someone please help how I should properly do this step by step to give all domain users permissions to view a report in SSRS?
Thanks much! - Rookie DBAHi IWAR,
The error message "Cannot open database "ReportServer" requested by the login. The login failed. Login failed for user 'USER LOGON'" means the user 'USER LOGON' does not have permissions to access the "ReportServer" database.
To fix this issue, please verify that the user has a valid database user login. For more details, please refer to the following steps.
In SQL Server Management Studio, open Object Explorer and expand the Databases folder.
Expand the database in which to create the new database user.
Right-click the Security folder, point to New, and then click User.
On the General page, enter a name for the new user in the User name box.
In the Login name box, enter the name of a SQL Server login to map to the database user.
Click OK.
Reference:
http://technet.microsoft.com/en-us/library/ms156468(v=sql.105).aspx
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
HT1782 storage system fail or repair failed
When I use the disk utility, I click on the first volume which reads ST9500325ASG, it gives me a message "storage system fail or repair failed".
When I click on the disk below which reads Macintosh HD. It says the volume 2FE etc.....appears to be ok. The volume Macintosh HD appears to be ok.
Why the error message on the first? Also I did encrypt the volumen.
I have Mac OSX 10.7.4
Thank you.The top-level item, ST9500325ASG, is the disk. The items below are that disk's volumes/partitions. You'll get different results selecting each. Step one is to boot with your SL install disk, launch Disk Utility, select the disk, and repair it. You might turn off FileVault before proceeding. i don't use it, so can't address any issues with it.
-
Hello,
I am trying to install Microsoft SQL Server 2008 R2. I get the error bellow (Database Services Engine Failed, SQL Server Replication Failed, Full Text Search Failed, Reporting Services Failed). I already have a copy of SQL Server 2008 R2 on the machine.
I want to create a new named instance of SQL Server for some software I'm installing.
The error is below.
Any help would be much appreciated, thanks!
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Exit code (Decimal): -595541211
Exit facility code: 1152
Exit error code: 49957
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Start time: 2014-02-06 09:14:09
End time: 2014-02-06 11:18:16
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\Detail.txt
Exception help link: http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.50.2500.0%26EvtType%3d0x44D4F75E%400xDC80C325
Machine Properties:
Machine name: BAHPBZ52TY
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
Sql Server 2008 R2 SQLEXPRESS MSSQL10_50.SQLEXPRESS Database Engine Services
1033 Express Edition 10.50.1600.1 No
Sql Server 2008 R2
Management Tools - Basic 1033 Express Edition
10.50.1600.1 No
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
Installation location: c:\c7ced2c86d6b9813b28186cc831c2054\x64\setup\
Installation edition: EXPRESS_ADVANCED
Slipstream: True
SP Level 1
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: True
AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE:
CUSOURCE:
ENABLERANU: True
ENU: True
ERRORREPORTING: False
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SQLENGINE,REPLICATION,FULLTEXT,RS,SSMS,SNAC_SDK,OCS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: c:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: c:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: aedt2bSQL
INSTANCENAME: AEDT2BSQL
ISSVCACCOUNT: NT AUTHORITY\NetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE: c:\c7ced2c86d6b9813b28186cc831c2054\PCUSOURCE
PID: *****
QUIET: False
QUIETSIMPLE: False
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: BAH\568385
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 0
UIMODE: AutoAdvance
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0xDC80C325
Configuration error description: Access is denied
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\Detail.txt
Feature: SQL Client Connectivity SDK
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Replication
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0xDC80C325
Configuration error description: Access is denied
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\Detail.txt
Feature: Full-Text Search
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0xDC80C325
Configuration error description: Access is denied
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\Detail.txt
Feature: Reporting Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0xDC80C325
Configuration error description: Access is denied
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\Detail.txt
Feature: Management Tools - Basic
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Microsoft Sync Framework
Status: Passed
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\SystemConfigurationCheck_Report.htmHello,
If you see error descriptioon it gives access denied so basically it is because of some access issue.I guess You must be using some domin account for installation make sure it is added as local administrator also instead of using NT Authority network
service as SQL server service account use local system account .
Below link would help
http://serverfault.com/questions/212135/access-is-denied-error-installing-sql-server-2008-on-windows-7
You can also browse to setup.exe file and RK on it and select run as administrator
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
RFC logon failed with message: Failed: Connect to SAP gateway failed
I installed CI instance fine and i am stopped here with this error at the end of DB instance install. Could someone let me know what could be the reason for this. Is there any fix or workaround to continue the install.
INFO 2006-09-16 01:13:02 [iaxxrfcimp.cpp:398]
CAbRfcImpl::setRfcConnectParam
RFC parameter ASHOST set to value hostSAP.
INFO 2006-09-16 01:13:02 [iaxxrfcimp.cpp:398]
CAbRfcImpl::setRfcConnectParam
RFC parameter SYSNR set to value 09.
INFO 2006-09-16 01:13:02 [iaxxrfcimp.cpp:543]
CAbRfcImpl::checkConnectInfo
RFC connection information checked successfully.
ERROR 2006-09-16 01:13:02 [iaxxrfcimp.cpp:450]
CAbRfcImpl::openRfcConn
FRF-00007 Unable to open RFC connection.
ERROR 2006-09-16 01:13:02
CJSlibModule::writeError_impl()
FRF-00063 RFC logon failed with message: Failed: Connect to SAP gateway failed
Connect_PM GWHOST=hostSAP, GWSERV=sapgw09, ASHOST=hostSAP, SYSNR=09
LOCATION CPIC (TCP/IP) on local host
ERROR partner not reached (host hostSAP, service 3309)
TIME Sat Sep 16 01:13:02 2006
RELEASE 640
COMPONENT NI (network interface)
VERSION 37
RC -10
MODULE nixxi_r_mt.cpp
LINE 8528
DETAIL NiPConnect
SYSTEM CALL connect
ERRNO 146
ERRNO TEXT Connection refused
COUNTER 4
Thanks,
Ramat the end of the database instance installation SAPInst is doing some RFCs to the CI.
The logfile states that the gateway on host hostSAP with the systemnumber 09 is not reachable.
Please check if you have started the central instance on this machine.
peter
Maybe you are looking for
-
How do i install mac os 10.4 without disk 2 of install?
wife's ibook got full of stuff and i went to the genius bar and they recommended "erase and install'. i thought i had all the disks, but i'm missing disk 2 of install disks. i have 10.2 install disks, but only the initial install disk of 10.4. now i'
-
How to use INDEXFILE param in Import
ok, this is my first time trying to use this option. Oracle9i. Here's what I am doing. I have in my Import .bat file: imp user1/user1@db2 FILE=D:\exp1230.dmp LOG=D:\IMP.log FROMUSER=USER1 TOUSER=USER1 BUFFER=100000 IGNORE=Y INDEXFILE=D:\indexfile.sql
-
Read lines from text-file in specified [ITEM]
Hello, are there any functions integrated in Labview to read a text-file which looks like this: [ITEM-NAME_01] parameter1 = here parameter2 = 1123 parameter3 = a453 [ITEM-NAME_02] parameter4 = here parameter5 = 1123 parameter6 = a453 Can this be done
-
Dear All, My function module downloads the content of a document into a path specified (For example E drive). My requirement is to convert the document(textfile) to a pdf and then upload the data. All of this should be done automatically ( i mean no
-
Data Separator as semi colon in .CSV
Hi Guru's, Will it be a problem if I use semi colon as data separator rather than using a comma????