Result Analysis for TECO status - all values are 0

Dear guru,
I've done the configuration for Result Analysis with POC method 03, for project.
There are 4 relevant status: PREL, REL, FNBL and TECO. TECO is mark as final RA.
PREL, REL, FNBL are ok, but I face problem with TECO.
In project I plan cost, plan revenue, and post actual cost through production order. There is no actual revenue.
However, when I set the status to TECO and run Result Analysis, all the value: plan cost, plan revenue, actual cost,... are 0.
I confuse why it is happen. Please help me.

And another point, actual cost can be see in report, but in RA the actual cost is 0, for also other status.
When I post actual cost through F-02, it is ok. But in this case actual cost is posted to project through confirming production order and receipt material.

Similar Messages

Result analysis for sub-items on SD-order

Hello,
I would like to know, whether also the document flow for subitems is being checked while executing result analysis.
Example:
We have got an SD order, a higher-level item and a sub-item.
Both of them have assigned the same result analysis key. Within this key it is defined in customizing (OKG3), that the Sales Order Structure is A-"Summarize Plan and Actual Data of Subitems on Highest Item"....so the result analysis for the sub-item is being performg via the higher-level item.
The higher-level positions is already completed - the delivery is made and also the invoice is created.
The sub-item is not completed - neighter delivery is made nor the invoice.
While executing the result analysis for the higher-level item, the status FNBL (final billing) is recognized and all cost are settled from WIP to CO-PA.
As far as I know, the document flow should be checked withitn the result analysis and based on this the status should be recognized.
Therefore It seems, that only the document flow from the higher-level item is being checked. If also the document flow from the sub-item is checked, there would be no way to get the status FNBL as the sub-item is not complete.
Is it SAP standard delivered behaviour?
Thanks in advance
Peter

Thanks Waman,
I have tried to delete the result analysis key from the sub-item, but still the same result in result analysis...
Could you tell my the consequences from the 1A setup from the note? It is adviced withitn the note to not use the 1A setup. But we use this and it works fine. Just some messages during the result analysis, that it could not be performed for sub-items, but this has no influence on the values.
Regards
Peter
Edited by: Peter Jankech on Jun 9, 2010 8:57 AM

How to hide rows if all values are Zero (0) horizontally?

Hi,
I have got a requirement to hide rows from the results if all values are equal to zero horizontally.
Example:
Region   M1    M2   M3
East     0      0    3
West    10     20    0
South   -5      0    5
North    0      0    0In the above example only North Region row should be hidden from the results becasue all the measures values are zero.
Can someone please let me know the logic to achieve this?
Thank in advance.

Hi Karthik,
Your answer was spot on(you are awarded points) but not my question. My client uses some X erp, which removes all zero value records when he clicks to see results. He wanted the same thing for Answers (he does not want to add any filters). Is there anyway to achive that, like using javascript or something?
Thanks in advance.

Results Analysis for Projects

Hi Guys,
We use Results analysis for projects and also we use RA in Product Costing.
Can anyone let me know what exactly does this Results Analysis mean ( not in SAP terms ).
I am trying to look for this over help.sap.com and google but could not find information on what exactly this term means.
Also how is this related to WIP?
Please clarify.
Thanks,
Srikanth.

Dear srikusap,
Calculation WIP through the SAP, RA key will play important role. Work in process calculation is diferent from industry to industry.
In SAP RA key will shows the WIP amount while u running KKAX Transaciton Code. After when ever u do the settlement then ti will be settled to Financial Account. At that time A Accounting Document was generaged. when ever the Order Status is Teco then the provious period WIP will be reversed.
Revert back if u any calrification.
Raj

Results analysis for sales orders- actual costs/ revenues - (kka3-kkak)

Hi, i have a problem when I execute the individual results analysis for sales orders (kka3) I can see actual revenues and actual costs, however when I execute the collective processing (kkak) for the results analysis I don´t see these (actual revenues and costs). Is it normal? How can I see these in the collective processing?

Could be one of these possibilities:
1) Controlling Area set is wrong
2) You're input parameters are insufficient to get that sales order. Check Order Type etc you input in the main screen
3) The master data is wrong which is not allowing the link to the Sales Order. You would have to check each field thoroughly.
You will have to probably do a lot of checks before you resolve this. This isn't normal btw....you should see all Sales Orders
Assign Points if useful....

Results Analysis for Sales Orders

Hi
When i am calculting Results Analysis for Sales Orders as a part of Month End Closing Activities there are some errors for few orders...
Msg Type: E
AppAr: KJ
MsgNo: 216
Message Text: Planned Cost for Valuation are 0. Please Check the Object.
Can any one tell me what might be the error..
Thanks in Advance..
Sivaram

Hi,
The error is offen caused by one or possible more than one of following statements:
- the delivery block of the order is set
- the billing block is set
- the schedule line ( confirmed quantity ) is missing
- the position has been cancelled
- price condition is missing
In case no one of the mentioned options wouldn''t help, set the position status to technically completed, if the position is processed as well ( delivery, invoice, etc. ).
We often face this kind of issue
Good luck
Marian

Result Analysis for Refurbishment order

Hi Experts,
Could you please explain, can we calculate result analysis for refurbishment orders, I have created the RA key wip cost element ,selected internal and service orders w/o revenue in OKG9 and other WIP setting, I have assigned this TA key to order type in OIOF, I have created one refurb order, released and confirmed the order, now I have to do month end activity like RA calculation in KKA1 and than settlement.
When i am trying to execute KKA1 I am getting this message " Results analysis data was not changed
Message no. KJ240"
Could you please advise me how I need to fix this issue.
Appreciate if you can explain the month end process for refurbishment order in detail.
Regards,

Hi,
The default settlement rule for refurbishment ordrers is FUL rule to material. This type of rules defines the business scenario where the actual costs are settled only after the order is delivered or technically completed. In such cases the most used solution to monitor costs incurred on the order is to assign a results analysis key to the order and compute the so-called work in process (WIP). WIP (if computed) is equal to the actual costs on the order and it is posted to a WIP account when settling the order before DLV or TECO. When the order is delivered or technically completed, WIP calculation reverse WIP in CO
and the consequent settlement post this WIP cancellation to FI. Simulateously, the actual balance of the order is settled to material.
Check your customizing in OKG9 for the RA version ; have you set flag 'transfer to FI' ?
regards
Waman

Results Analysis for Contracts

Dear Experts,
My Client requires to do Results Analysis for Contracts. Please share your thoughts.
Regards,
Shareeq

Dear Ahemad,
In what would be the output of the result analysis ?I mean from sales point of view if u see then u will have to develop the report accordingly.
If you are talking abt the MM contract then there are some std reports available.
If ur talking abt the customer service point of view then we this std transaction IP51.
thanks and regards
raghav

After doing the recording for transaction fpcj, the values are not being se

after doing the recording for transaction fpcj, the values are not being sent to the g/l.

HI,
When you are recording.. you might be creating the values... ensure that they are updated into the GL before u write program. I doubt you might have missed the save ..
Thanks
Mahesh

How to execute Result analysis for a Single order?

HI,
I need to execute Result analysis for a single process order. But i found cumulative RA. Can any one provide the Individual Result analysis execution T.code?
Thanks
KB

Hi,
Use "KKAX"-->individual WIP calculation
"KKAO"-->Collect WIP calculation
Thanks,
Rau

I have pages setup for english but all templets are in spanish

Hello everyone
After trying to reset keyboard preferances and services I am not getting any solution.
I have pages setup for english but all templets are in spanish.
can anyone help to fix this problem?
Thanks
dsd

You mean this?
Sociis mauris in integer, a dolor netus non dui aliquet, sagittis felis sodales, dolor sociis mauris, vel eu libero cras. Interdum at. Eget habitasse elementum est, ipsum purus pede porttitor class, ut adipiscing, aliquet sed auctor, imperdiet arcu per diam dapibus libero duis. Enim eros in vel, volutpat nec pellentesque leo, temporibus scelerisque nec. Ac dolor ac adipiscing amet bibendum nullam, massa lacus molestie ut libero nec, diam et, pharetra sodales eget, feugiat ullamcorper id tempor eget id vitae. Mauris pretium eget aliquet, lectus tincidunt. Porttitor mollis imperdiet libero senectus pulvinar. Etiam molestie mauris ligula eget laoreet, vehicula eleifend. Repellat orci eget erat et, sem ***, ultricies sollicitudin amet eleifend dolor nullam erat, malesuada est leo ac. Varius natoque turpis elementum est.
A: It's Latin, not 'Spanish.'
B: What problem?
Click on this Placeholder text to select it (All of it will be selected on a single click).
Type.
On the first kaystroke, all of the placeholder text is deleted and the first typed character appears.
Carry on.
Images in the templates are media placeholders. Replace them with your images in a similar manner.
For more on placeholder text, see page 75 of the Pages '09 User Guide; for more on media placeholders, see page 137.
The guide may be downloaded via the Help menu in Pages '09.
Regards,
Barry

HT3702 I am being charge for itunes but all apps are free?

I am being charge for itunes but all apps are free? It is possible to get money back?

If you are referring to the temporary store holding charge as described on the page that you posting, which is 'charged' each time that you change the card details on your account, then it should disappear off the card within a few days or so - though it varies by bank, and with it now being the weekend it might an extra day or two. If they haven't disappeared within a week of them being made then you could contact iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
Also some apps may be free to download but they then allow you to make in-app purchases to unlock extra features within them - you can turn off in-app purchases via Settings > General > Restrictions on your phone.

Sales order item report based on results analysis key and status

Hi,
I am trying to find a a report to generate list of sales order items with following selection
        -invoicing status -invoiced/not invoices (other status)
        -result analysis key assigned to this item (VBAP-ABGRS)
        -system status /released/teco
Basically i am CO consultant and not so familiar with the SD statuses. I tried VA05 and V.26 but all required selections are not available in these reports.
If no standard report is available in ERP, i would like to have it in BI. Can some help me with table fields for statuses.
Thanks in advance.
Regards
Raghu

Hi Raghu
Go to SE16 and give VBUK table and execute it there you can select the following feilds and then check wheather they are meeting your requirements or not.If they are meeting your requirements then create a new Z report by copying standard VA05 key feilds. and include the other feilds which you need.So you take your ABAP team help
Billing status     FKSTK
Posting Status BUCHK
Overall status GBSTK
Document category VBTYP
Regards
Srinath

Results analysis for POC method with statistical cost element

Hi,
We are testing ETO (engineering-to-order) scenario With valuated
project stock and cost based POC RA method.
Inventory is updated during external procurement and we have used
statistical cost elements (Cost element category - 90) for inventory G/L.We want to use a
Result analysis method which considers this statistical cost elements
for calculating POC.For this purpose we have implemented SAP Notes
616960, 616869 and 78420.
In short, as per SAP note 616869, we created a customer enhancement
project for customer enhancement 5 of the results analysis (see Note
H78420). We copied the source code for customer enhancement 5 of the
correction instructions of note 616869 and then implemented SAP note
616960 to read the statistical actual costs.
Then we included the statistical cost as actual costs - Category K in
OKG4.
The system is doing POC and revenue in excess of billing calculation
correctly after taking into consideration the posted statistical cost.
During settlement of RA (CJ88), system is not giving effect to
inventory value. On settlement of RA, revenue should be recognized but
at the sametime the inventory represented by statistical posting should
be consumed(COS). The system should post a P&L posting which reduces
the inventory (representing statistical cost) and updates the actual
costs on settlement.
In our example, Statistical actual
posting is of USD 57150, planned revenue USD 100000 and POC is 70.27%.
Revenue in excess of billing comes to USD 70265.60. Recognisation of
revenue of USD 70265.60 is not correct as actual consumption is yet to
happen. The correct posting in FI should be revenue of USD 70265.60
along with COS of USD 57150.
Please suggest why on settlement the system is not posting the COS
along with revenue recognised?
Thanks,
BK

Hi Bijay,
We are in a similar situation in one project. Did you get any solution to the problem you posted here? If you can share it, please.
Regards,
Gireesh

Result analysis for Direct Postings

Hi All,
I have a new requirement for Result Analysis determination at service order level
Requirement is while posting cost to service order we have two costs, one is through Activity (KP26) and another is direct posting using KB11N.
Both have different cost elements
615000 is for activity pricing using KP26 which posted 120 $
195009 is for direct cost posting using KB11n which posted 150$
Now after the actual cost is posted to service order we are doing result Analysis using KKA1, I am getting 120+150 in WIP. But requirement is system should ignore cost of direct postings using KB11N from WIP and it should calculate 120 alone in WIP
I hope there is no settings using DIP profile to control this, i read some help and it says using OKG4 and OKG5 this can be controlling
I tried using OKG4 with Line id and assigning Category as N , but it is not ignoring
Could you please guide on how to ignore direct cost entries being determined to WIP. I have a vague idea on OKG4 and OKG5
thanks for your help
santosh

Hello,
While OKG4 can achieve however please bear in mind that since you are not going to settle this cost anywhere, cost will always seat of Service order. When you try and close service order you will get error that not all cost is settled, this will further impact your month end RA / Settlement job.
I know we can still close service order having cost but that requires setting on Settlement Profile and most of organization have SOX which does not allow them to close Cost object which has balance onto it.
I am side tracking bit but wanted to bring this up as down steam issue.
Thanks
Parth

Result Analysis for TECO status - all values are 0

Similar Messages

Maybe you are looking for