RFC Scenarios Debugging

Hi,
I want to know the procedure for debug the RFC scenarios both Inbound and Outbound RFC's debugging..
soppose from a file to RFC and RFC to File means.. how can we debug the both scenarios...
is there any debugging Guide is availabale for all the adapters and all the scenarios debugging procedure and steps .. please suggest me..
Thanks
Babu

Hi,
Please refer below guide
SAP NetWeaver Troubleshooting Guide
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/bd5950ff-0701-0010-a5bc-86d45fd52283
Best way to debug RFC and SOAP scenarios
/people/shabarish.vijayakumar/blog/2008/01/08/troubleshooting--rfc-and-soap-scenarios-updated-on-20042009
SAP Network Blog: Troubleshooting of ALE Process
/people/raja.thangamani/blog/2007/07/19/troubleshooting-of-ale-process
SAP Network Blog: Some errors in an XI production environment
/people/prashanth.azharuddin/blog/2006/11/24/some-errors-in-an-xi-production-environment
SAP Network Blog: Useful SAP Notes for XI
/people/sap.user72/blog/2005/05/02/useful-sap-notes-for-xi
SAP Network Blog: XI : RFCAdapter ReConnect Issue
/people/community.user/blog/2006/09/21/xi-rfcadapter-reconnect-issue
SAP Network Blog: RFC Scenario using BPM --Starter Kit
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
SAP Network Blog: Monitoring a flow in XI
/people/sergio.locatelli2/blog/2006/10/09/monitoring-a-flow-in-xi
Thanks
Swarup
Edited by: Swarup Sawant on Feb 12, 2008 6:32 AM

Similar Messages

File 2 RFC scenario debugging

Morning all,
I have a very simple A sync. scenario File to RFC.
To allow debugging of the Interface,my ABAP programmer has created an endless loop.
What's strange is that on SM50 I can track a new Process created by the XI user and after
a few more seconds another session with a new ID appears....
Have you encountered a similar issue before? what is the reason for it then?
Any way, after removing the "debugging loop " everything runs fine.
Points will be awarded for the most reasonable answer....
Nimrod Gisis

Hi,
I do agree , see the below reason and links also
you can see that many dialog work processes are occupied with the program SAPLARFC. You might also see update or batch processes with the status stopped RFC.
This is because in transaction SMQS as many tRFCs were started at the same time as the parameter settings allow and this has resulted in the user contexts losing their rollability. This situation arises for instance when mass data is processed. See SAP note 726148 for more information and possible solutions.
http://help.sap.com/saphelp_nw2004s/helpdata/en/8a/145db7b9c3c64e8af1c0be1dae6f37/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/be/470dc21ca4447b828597f614aaaec1/frameset.htm
regards
Chilla
reward points if it is helpful..

RFC Scenario using BPM

I did whatever mentioned in that blog(/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit). Also I do have some experience in BPM.
After testing I don't see the file inthe outbound directory. So I started analysing from all sides.
1. First checked the message in my sxi_monitor, it black and white flag showed that the message processed successfully.
2. I opened the message and saw the message from CENTRAL Client passed to PE ADAPTER Client with tooltip showing "Transfer to Process engine".
1. First I checked whether my BPM is correct by pressing F7. There is no syntax error.
2. I checked in sx_cache, the ReturnCode was 0.
3. In smq2 I saw a message stuck in the PE queue. I double clicked the queue and saw the status text as "Permanent error in BPE inbound processing". So I kept debugging by pressing F8 and after that the message got disappeared.
4. I opened the message in sxi_monitor, and after the CENTRAL Client the message passed to PE ADAPTER, which measn the meesage has got transferred to process engine. But i'm not seeing any change in the file.
5. Also what I did was use transaction SXMB_MONI and chose process radio button and execute. Located my message but there is no task value which starts with 'WS..' in Process def column.
Can you please pinpoint where i went wrong and anything else?
One more thing, everytime i test the new file the file goes and gets stuck in the queue and I have got to follow the item 3 mentioned above.
Thanks,

Hi Kishore, The second block is a synchronous send block in the BPM triggers the call to RFC. I've done it as per the blog. There is no transformation step in the BPM. Anyway I fixed the issue. In the receive block whatever container value I used should be used in the send block also. Earlier I was getting some warning. Now my BPM is clean and it worked.
Lesson learnt: Ensure there is no warning in the BPM. Thanks again Kishore.
Thanks,
Edited by: XISearch on Apr 29, 2011 5:20 AM
Edited by: XISearch on Apr 29, 2011 5:24 AM
Edited by: XISearch on Apr 29, 2011 5:24 AM
Edited by: XISearch on Apr 29, 2011 5:25 AM

Step by Step Guide Details for RFC to File and File to RFC scenario

Hi Guru's
Good day to you. I am tyring to develop some scenarios based on RFC adaptor. so i want to start up with basic scenarios like RFC to File scenario(Here i just want to pull some data from SAP using RFC and put it in destination folder as an text file) and FILE to RFC scenario (Here i just want to take some data from the file and update into SAP).
For doing these scenarios i would like to request you people to send me the step by step guide which explains me about the complete steps of configurations required to do the RFC to FILE scenario and FILE to RFC scenario.
I found some scenarios and i am in confused state. so i request you to please put your experience to help me out.
thanks in advance.
Regards
Raj

Hi Aaron,
I don't know your scenario and your ECC and PI versions but I learned how to use ABAP Proxy more than 1 year ago with the following tutorial:
Edit--> The forum doesn't allow me to post external link, just search "ABAP Proxy Communication Scenario" in google and visit the 1st result
The way to develop ABAP Proxys has changed a little if your PI is 7.1. In the ECC side, the transaction SPROXY looks much better too if you have a recent version of the ECC.
Edited by: Marshal on Oct 8, 2009 5:08 PM
I've found that SDN Document. Maybe the scenario is not the most simple to start with ABAP Proxy but is very well documented and is for PI 7.1. The document also handles the inbound and outbound proxys
[http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c00ca32e-f991-2b10-f5be-97114bd2b08f&overridelayout=true]
Edited by: Marshal on Oct 8, 2009 5:22 PM

Error while calling RFC adapter(FILE-XI-RFC scenario)

Hi,
I am trying for FILE-XI-RFC scenario. I am getting the following error. I have checked in message monitoring. The error is coming while calling the RFC adapter. Can any body tell what problem is this?
Regards,
Dhana
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.f23.sofd00001530a</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>2: Unable to find URL for Adapter Engine af.u7a.us4296</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading access data (URL, user, password) for the Adapter Engine af.f23.sofd00001530a</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Hi,
I did SLD check.
The status says 'Summary: Connection to SLD works correctly'.
But it fails while checking the access to XI profile.
Here is the status
Summary: Connection to SLD works correctly
Now checking access to the XI Profile
Properties of RFC destination LCRSAPRFC
RFC host:
%%RFCSERVER%%
program id: LCRSAPRFC_DZ1
gateway host:
gateway service:
Testing the RFC connection to the SLD java client...
RFC ping returned exception with message:
/ CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679#Transaction program not registere

File to RFC scenario with no BPM

I want to create File to RFC scenario with no BPM. I want to invoke RFC synchronously to verify that I'm getting correct response back, but i dont wanna process the response. So, In SXMB_MONI i can check the response back from RFC right? Or do I need to have BPM if want to see the response back from RFC?
What kind of business system i need to create for RFC? can i use same business system for both File and RFC? I'm using one Business System created on Third party technical system, which i'm using for file Input, also for RFC. Is that OK?
Thanks,
Deepesh

Hi,
I need to have BPM if want to see the response back from RFC? ... yes
The BPM will help you find the response very comfortable.
What kind of business system i need to create for RFC? can i use same business system for both File and RFC? I'm using one Business System created on Third party technical system, which i'm using for file Input, also for RFC. Is that OK? ..Yes you can .
Regards
Agasthuri Doss

File-to-File/RFC scenario with reading filename

Hi,
i have a File-to-File/RFC scenario which causes some problems in desining it correctly. Maybe some of you has an idea how to do this.
Scenario:
- A file is picked up by a File-Adapter. The files are different: pdf, doc, tiff, jpg, txt, ...
- The file must now go through a business process (not necessary the file, but i need the filename in the business process).
- The process has to contact several backend systems (SAP R/3) to collect some data. To achieve this the filename has to be send to this systems.
- The collected data are send via SOAP to a receiver system
- The file itself has to be stored in a directory via File-Adapter.
Here's my problem:
- Is it possible to transport the binary file content within a message which contains other elements (e.g. filename)?
- Is it possible to do graphical mappings with such a payload (only 1 to 1)? Or must i use Java Mappings only?
- How to generate a Message from the sender File Adapter which contains binary file content AND filename? Is this possible with a Module?
- Is it better to create 2 messages with an adapter module? One with the image the other with the filename. Or is it better to split them later in a Mapping?
Thanks in advance,
ms

If all that you need is the file name, use adapter specific settings in the sender file adapter. Then you can access the file name in mapping runtime in UDFs. If you want to have content of the pdf, jpg etc images, i do not think there are ready modules available except for reading pdfs ( you might have to research on this).
For look ups etc with R3 systems, you can use the file name that you got from the adapter and store it in mapping fields.
VJ

Fixed Length of a field in the File-XI-RFC Scenario

Dear All,
I am doing one File-XI-RFC scenario in which user is sending me the file with some delivery nos (VBELN) in it and I am sending those all delivery nos to my RFC in R/3.
Now I want one conition to be put that if any delivery no is of less than 10 characters than that delivery no should not be sent to RFC rest the remaining will be processed to RFC.
I have put one UDF for this whose code is as follows:
int len = a.length();
if (len == 10)
int b=1;
b = (1/len);
return a;
But this code is not working. Please guide me how to solve this problem.
Regards,
N.Jain

HI,
Input is A : Delivery No take all the delivery no in one context.
for(i=0;i<A.length;i++)
int b= Integer.parseInt(A); it will remove all the leading zeros if it has any.
int j=(new Integer(b).toString().length()); count the lenght of the Del no.
if(j>10)
result.addValue(A(i));
else
result.addValue("null"); will not send anything.
Thanks and Regards,
Chirag gohil

Soap -- XI -- IDOC/RFC scenario

Hello,
I have a jsp page that working in tomcat server.
I want to send values from jsp page to xi to r/3. I think it will have
soap-- xi -- IDOC/RFC scenario
Pls send me pdf /doc to implemet it
Regards

Hi,
Please Refer the Following Links
/people/shabarish.vijayakumar/blog/2006/03/23/rfc--xi--webservice--a-complete-walkthrough-part-1
/people/shabarish.vijayakumar/blog/2006/03/28/rfc--xi--webservice--a-complete-walkthrough-part-2
/people/siva.maranani/blog/2005/09/03/invoke-webservices-using-sapxi - Invoke Webservices using SAPXI
/people/siva.maranani/blog/2005/03/01/testing-xi-exposed-web-services
/people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/2131 [original link is broken] [original link is broken] [original link is broken] [original link is broken]
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/336365d3-0401-0010-9884-a651295aeaa9
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/336365d3-0401-0010-9884-a651295aeaa9
Regards
Khanna

Issue in HTTP to RFC scenario

Hi Experts,
i am working on HTTP to RFC scenario.From Http client i am sending data to integration engine.
i am unable to see any messages in SXMB_MONI.Means data from HTTP client not reached Integration engine.
why the data is not reaching integration engine?
This scenario needs any configuration settings in XI or any changes in HTTP client??
Plz suggest me in this issue?
Regards,
Bhuvan.

Hi Experts,
thanks for giving replies.
The response i am geting in HTTP client:
Result:
<! DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<html>
<head>
<title>Error Report</title>
<style>
td {font-family : Arial, Tahoma, Helvetica, sans-serif; font-size : 14px;}
A:link
A:visited
A:active
</style>
</head>
<body marginwidth="0" marginheight="0" leftmargin="0" topmargin="0" rightmargin="0">
<table width="100%" cellspacing="0" cellpadding="0" border="0" align="left" height="75">
<tr bgcolor="#FFFFFF">
 <td align="left" colspan="2" height="48"> 404 &nbsp Not Found</td>
</tr>
<tr bgcolor="#3F73A3">
 <td height="23" width="84"><img width=1 height=1 border=0 alt=""></td>
 <td height="23"><img width=1 height=1 border=0 alt=""></td>
 <td align="right" height="23">SAP J2EE Engine/7.00 </td>
</tr>
<tr bgcolor="#9DCDFD">
 <td height="4" colspan="3"><img width=1 height=1 border=0 alt=""></td>
</tr>
</table>
 
<table width="100%" cellspacing="0" cellpadding="0" border="0" align="left" height="75">
<tr bgcolor="#FFFFFF">
 <td align="left" colspan="2" height="48"> The requested resource does not exist.</td>
</tr>
<tr bgcolor="#FFFFFF">
 <td align="left" valign="top" height="48"> Details:</td>
 <td align="left" valign="top" height="48"><pre> Go to <A HREF="/" target="_parent">main page</A> of this application!</pre></td>
</tr>
</body>
</html>
Regards,
Bhuvan.

XI to RFC Scenario: Runtime error during RFC Call

Hi,
I am testing a XI-to-RFC scenario involving BPM. The RFC works perfectly from SE37; but I get 'ICM_HTTP_TIMEOUT, Error code 402' when I invoke it from XI. On digging through the problem, it appeared that the calling program produced a short dump at the ABAP end. The code is as follows:
module %_rfcdia_start output.
 "Do not display screen !
 call 'DY_INVISIBLE_SCREEN'.
 perform remote_function_diastart.
endmodule.
module %_rfcdia_call output.
 "Do not display screen !
 call 'DY_INVISIBLE_SCREEN'.
 perform remote_function_diacall.
endmodule.
module %_cpic_start.
if sy-xprog(4) = '%RFC'.
 perform remote_function_call using rfctype_external_cpic.
else.
 call 'APPC_HD' id 'HEADER' field header id 'CONVID' field convid.
 perform cpic_call using convid.
endif.
endmodule.
form cpic_call using convid type c.
communication send id convid buffer header.
if sy-subrc eq 0.
 perform (sy-xform) in program (sy-xprog).
else.
 message a800.
endif.
endform.
form remote_function_call using value(type).
data rc type i value 0.
do.
********This is the line where error occurs************
 call 'RfcImport' id 'Type' field type.
 if sy-xprog = 'JAVA'.
 system-call plugin
 id 'JAVA' value 'FORW_JAVA'
 id 'RC' value rc.
if there is no rollout on the JAVA side which
rolls both, JAVA and ABAP, we return to the
C-Stack and reach this point
in case there was an rollout, the ABAP-C stack is lost
and we jump direkt to this point
here we trigger the rollout on this Abap side with
the following statement
 system-call plugin
 id 'JAVA' value 'ROLL_OUT'
 id 'RC' value rc.
 else.
 perform (sy-xform) in program (sy-xprog).
 rsyn >scont sysc 00011111 0.
 endif.
Anybody has any idea why it is happening? Is it a network issue? The dump in ST22 says that 'The program "SAPMSYS1" was terminated manually'. How it is possible to manually abort an automatic call?
Awaiting reply.
Regards.

Hi,
Probably because of timeout, it is unable to execute the request ..so it is aborted.
btw, is it a synchronous call ? what is the message size ? the given data to RFC is correct and valid structure ? check the mapping .for this use the data from SXMB_MONI and test it
Check this blog for timeout errors-
/people/michal.krawczyk2/blog/2006/06/08/xi-timeouts-timeouts-timeouts
Regards,
moorthy

XI to RFC Scenario

Hi SapAll.
i had created a Remote Function Module in SAP-R/3 with 2 structures under tables(tab)and this rfc is going to collect data from xi for doing some bdc and then when the bdc fails,rfc will return values to xi.
in this real time scenario what xi will do,i know that xi will collect the data from rfc.
as i have got the Netweaver-PI Software i would like to create a sample interface in PI for doing the above mentioned scenario
so what my question is how and in what way we can do this in XI without BPM,after xi collect the export parametes from rfc with failed reasons what xi do,will it update the sender.
will be waiting for a good answer.
regards.
Varma

1. if ur sender adapter is sync like SOAP
you sync RFC scenario...whatever the resposne that u get from RFC can be mapped back to sender using the response mapping..if the sender supports that fore.g if u are using SOAP as sender..
2. if ur sender adapter is not sync like file / JDBC / JMS
just do the RFC lookup in mapping ..map the response to the target structure and use the receiver which is same as the sender and generate file to the sender

Mapping error in file(FCC) to rfc scenario

Hi,
i am trying to implement mapping in file (fcc) to rfc scenario. the source file is getting picked up, but the problem is arising during mapping. i am unable to generate the target structure. i am attaching mapping structure as follows
Source Structure                           Target Structure: RFC
storesales                                     -POSDW-CREATE_TRANSACTIONS_EXT
     recordset                                      it_transaction
       gmd_site_101                                 item
      gmd_site_102
      gmd_site_103
      gmd_site_104
here the recorset is mapped to item, and fields of subnode gmd_site_101 is mapped to fields of subnode item. similarly, for the other subnodes. but when testing with xml file, the target field is not getting generated. in FCC parameters, ignorerecordset name is set to "true".
any help would be very helpful..thanks in advance.
warm regards,
kartz

hi
You can test the data using payload from SXMB_MONI in message mapping test tool so as you can get to know the reason of failure.
It would be better if you paste the error you are getting over there.
Check if you have maintained the namespace in CC or not. it should be same maintained if you have kept namespace in message type.
Also check in FCC parameters you must have used ignoreRecordsetName = true
Regards
Raj

SOAP Sender to RFC Scenario WSDL File

Hi,
I am working on SOAP -> PI -> RFC Scenario. I generated WSDL from sender agreement and gave to the client that can consumed by the third party system. But client is not ready to consume the WSDL. He provided WSDL and asking me to use that. Could you please suggest whether WSDL given by the client can be used in SOAP -> PI -> RFC Scenario. If it is possible, could you please provide steps how it can be done?
Thank you.
Regards,
Cdr.

Thank you Hareesh & Divya,
When we generate WSDL from PI, it gives soap action and soap address location based on the interface we use for SOAP -> PI -> RFC.
When we import WSDL given by the client as external definition, we get messages(Structures). But where do we pass the soap action or address location. I do not see any option in the soap sender communication channel. I am not visualize the link.
Can somebody share their knowledge if they have done in this way.
Thank you.
Regards,
Cdr.

Problem in storing data in BAPI in File to RFC Scenario

Hi everyone,
I m doing File to RFC Scenario.......I completed design and configuration part and actived the Communication Channels.....
Now when I check in Runtime workbench I am getting succefully executed both at outbound and Inbound Channels.......but
data is not updated in BAPI...........
I m getting following error when I check in Component monitoring......
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: RfcAdapter: receiver channel has static errors: configuration exception caused by: com.sap.aii.af.rfc.core.config.RfcChannelInactiveException: channel has status inactive: com.sap.aii.af.rfc.afcommunication.RfcAFWException: RfcAdapter: receiver channel has static errors: configuration exception caused by: com.sap.aii.af.rfc.core.config.RfcChannelInactiveException: channel has status inactive
Please help me out.......
Regards,
Sudheer.

Hi
"I took Business Service as Service but not Business System.....Will it effect the scenario???......"
I suggest While dealing with the SAP Systems we should use Business systems.
Pls check the foolowing Threads for the above Query
RFC - Business Service
Re: business service for file to rfc
Regards
Abhijit

RFC Scenarios Debugging

Similar Messages

Maybe you are looking for