RFC Synchronous Sender

Hi ,
I am Doing RFC->XI->SOAP Scenario.
I am Posting the Data Using ABAP Program and The Data Received on other side.
Now What Happend when I Post the Data My ABAp Program Goes into short DUMP.
My Problem Is When The Request Received then The Receiver send the Response that it has been Received. How Should SAP Captures or Handles the Respose Message . How We Should Display.
Points will be awarded.
Regards,
Jayasimha Jangam

--->How Should SAP Captures or Handles the Respose Message .
What ever response you are getting you can put that thing in a table(ztable)/pass into a func module for further processing....bla bla...
--->How We Should Display. :
For display use another report prog for fetching the data from the table...as the data is now into ztable..
Regards,

Similar Messages

File to RFC synchronous scenario stopped Picking the files

Hi Experts,
We have a File to RFC synchronous scenario. Till yesterday night it is working fine.
But suddenly it is stooped working.In moni, i can see the failed messages with the Mapping error " Can not create target element, values missing in the queue context "
No Payload in moni / communication channel monitoring / Message monitoring. I've noticed that, wrong files placed in the To-be- processed files and the adapter picked those files and failed in mapping.
I tried by stop and start the communication channel / did some dummy changes in the communication channel and activated. cleared the cache.
But still the communication channel is not working.when i stop and start the communication channel it will try to process the wrong files and failed.
Give me your valuable inputs to resolve this issue.
Regards
Bhargava krishna

Hi Bharghav,
Please go through the below,
Symptom
FTP Adapter is being used in the business scenario for message processing.
During file processing it is noticed, that the FTP sender channel stops
polling. There is no error in the channel monitor or the trace/log files
and the polling jobs are correctly displayed in the AFW scheduler table.
The issue is observed after a network connection issue with the FTP server.
In order to remove the hanging locks from the FTP Adapter, the parameter
'ftp.timeout' setting is required to be set, which releases the lock once
the timeout value is expired. But in the above situation, the value for the
'ftp.timeout' is not taken properly while establishing the data connection
by File Adapter.
Other terms
FTP Adapter, sender, FTP, adapter, timeout, stalled, network, hang, polling
Reason and Prerequisites
Program error
Solution
The hanging situation has now been improved by code changes. Please see
section "SP Patch Level" of this note for a list of updated software
components.
To get this correction available in your Support Package you need to apply
the patch matching to your Support Package version as per the instructions
in the NetWeaver Support Package Stack guide which can be found on the SAP
Service Marketplace as described in SAP Note 952402.
Thanks & Regards
Uday.S

BPM RFC synch send step

Hi
I am using RFC synch send step with in parforeach block in BPM. do I need to activate correlation to correlate synchronous request and synchronous response for RFC synch send step ?
Please let me know if you have any ideas on this.
Thanks
Anand

Hi Michal,
Thanks for the reply.
In SAP help I found the statement made below.
Activating a Correlation
An asynchronous or synchronous send step can activate correlations. This can be useful in the following cases:
· Synchronous send step
A synchronous send step waits for a reply message to be received. On receipt of this reply message,
correlations can be activated to correlate additional messages.**********************************Any idea on highlighted sentence...
Thanks
Anand

Synchronous Send Step

Hi
Can someone tell me about sync send step in detail
because in my scenario I am using a sync. send step and the other end is oracle database which uses a SP(stored procedure) for updation.
problem is that I am able to see updation process successfully in the database i.e.the adapter says processing successful.
but after certain amount of time the send step in the sxmb_moni shows error
I think the problem is with the return flag that I am using as an acknowledgement
which is sent by the SP, any suggestions pls
Ranjit

Hi,
This might help you
Synchronous Sending followed by Transformation
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
http://help.sap.com/saphelp_nw04/helpdata/en/83/d2a84028c9e469e10000000a1550b0/content.htm
Re: Sync - Async Bridge
Regards
Agasthuri Doss

Synchronous Send in BPM restartable?

I have a XI scenario with BPM,
in the BPM, there is a Synchronous send (calling BAPI in another R/3 system - RFC receiver adapter),
the problem is:
in case of failure due to target system unavailale, my scenario fails (Sync send fails - while calling BAPI), is there any way by which i can resend this message or restart the scenario from this point,
pls help,

Hi ,
We can resend the message from the particular point in BPM using Reconciliation concept in BPM once the application errors or system errors would be corrected.....
Check this one....
/people/krishna.moorthyp/blog/2006/04/08/reconciliation-of-messages-in-bpm
Thanks,
Sekhar D

Http to RFC or SOAP to RFC (synchronous)

Hi,
I need to connect PHP with RFC via XI/PI
Request will be send from php developed web pages to R/3 (RFC) to get data back to web page.
I think to resolve this scenario 1u2019ve two options
1: SOAP to RFC (synchronous)
2: HTTP to RFC (synchronous)
Can you please suggest me the scenario?
Thanks for you time
Regards,
Farrukh Ghani

Hi Ghani,
The two options you mentioned we can use,but it depends on how PHP web site going to send data,if it is going to send webserive then use SOAP adapter,you are expecting response ,the RFC wil work as synchronous.
If it is not Web Service other option is HTTP,receiver would be RFC only.
How to configure SOAP->XI>RFC or HTTP->XI-->RFC scenarios,simple search in sdn will give many blogs,search in sdn,
if you unable to find right one let me know..
Regards,
Raj

JDBC to RFC synchronous scenario (Urgent).

Dear forum,
My requirement is data is populated in oracle data base.we are fecthing the data from database through XI and sending it to R/3. RFC is sending the response (suceess/failure) to XI. And XI is updating the status message into database.
For this,I have done the JDBC - RFC - JDBC syncronous scenario using BPM. .I got the successfull message under message monitering.Problem is I cannot able to find the data for RFC and JDBC reciever.
Please find the following Configuration steps for the above scenario
3 data types
JDBC request, JDBC response one dummy structure to capture RFC response messages.
3 message types for the above data types
5 message interfaces.
OB request,
OB ABS request,
IB Asyn for dummy,
Syn ABS (JDBC req and dummy structure),
IB JDBC response.
4 message mappings.
Mapping between JDBC request to JDBC request dummy.
Mapping between JDBC request dummy to RFC request.
Mapping between RFC response to JDBC response dummy.
Mapping between JDBC response dummy to JDBC response.
3 Interface Mappings.
JDBC request to JDBC request dummy.
JDBC request dummy to RFC request and RFC response to JDBC dummy response(Synchronous request and responce) .
JDBC dummy response to JDBC response.
Integration Process.
Used following steps.
Recieve step asynchronous -> Send synchronous -> Send asynchronous
I can able to see the payload for sender under communication channel.But the data is not reached to RFC.can any one help me to come out of this problem.
Points will be awarded for helpfull answers.
Thanks & Regards,
Naresh.K

Hi Seshagiri,
We are trying the same scenario with out using BPM.
Following steps has been done in design(IR).
2 data types for JDBC request & JDBC response.
2 message types for the above data types.
1 outbound synchronous message Interface.
2 message mappings (JDBC request -> RFC request) and (RFC response -> JDBC response)
1 Interface Mapping.
Could you please let me know how to maintain the collaborative profiles & and agreement details in Configuration(ID).
Your valuable assistence is required to complete the interface.
Thanks in advance.
Kind Regards,
Naresh.K

Java Proxy - XI - RFC Synchronous Scenario OUTBINDING Problem.

Java Proxy -> XI -> RFC Synchronous Scenario. Problem
Hi,
 I'm doing a Java Proxy -> XI -> RFC Syncronous Scenario.
 A Java Server Socket is running as a Demon. When a client make a request to the Java Server Socket, this one call Java Proxy Client and set up the parameters.
 The first time that execute the scenario it works perfectly but no the next one and so on.
 The error when I check the monitor (TCODE: SXMB_MONI) is in PLSRV_OUTBOUND_BINDING.
<Trace level="1" type="B" name="CL_XMS_PLSRV_OUTBINDING-ENTER_PLSRV">
<Trace level="1" type="T">no outbound binding found.</Trace>
<Trace level="1" type="T">No standard agreement found for , DES210_DEV, , JPX_DEV, urn:servipago:SERVIPAGO_SAP_02, mi_os_t1</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
And it has sense, because my scenario doesn't begin with the execution of FM (RFC).
A Hint, my services in the first try are:
 Sender Service: JPX_DEV (Java Proxy Client)
 Receiver Service: DES210_DEV (R/3 4.6C)
But the second try and so on the services that I saw in the monitor are:
 Sender Service: DES210_DEV (R/3 4.6C)
 Receiver Service: JPX_DEV (Java Proxy Client)
I can't understand why they swich each other.
Any idea?

Hi,
Outbound binding problem is because of Reciever Determination/Agreement is not activated or refreshed correctly.
Try to recreate or refresh and activate it. Then check it.
also do the cache refresh in SXI_CACHE.
Also in go to Integration Builder(XI home page)->Administration->Cache Overview and do all the cache refresh.
Hope this helps
Regards,
Moorthy

Synchronous Sender HTTP

Scenario
HTTP(Synchronous) -
> XI -
> RFC (Synchronous)
Question :
Since the Sender is an HTTP "NO SENDER AGREEMENT " is Required, whether my understanding is Correct? (I am getting confused because the Sender HTTP is a Synchronous System). Please clarify.
Thanks.

HI Jenni,
It is not required to have sender Http Adapter so there is not required to have Sender Agreement,
Inorder to do Synchronous communication, in the http client , you need to give Quality of Service as BE i.e Best Effort. If so, then it will act as a Synchronous call. As usual you need to have Http Req and Resp data structure to handle this
Regards,
Moorthy

Http RFC Synchronous

Hi ,
I have created HTTP RFC Synchronous Scenario .....i am able to send the message to RFC... but i am not able to get back response...
I have created two communication channels one for RFC call in SAP R/3 and the other one is for sending HTTP respose back to source..
Where is the receiving http adapter is configured.... ?

I have created the scenario....but i am not able to get the response.....i am getting the following the response error
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_MM_FAXCHG_RFCRESP_</SAP:P1>
<SAP:P2>com.sap.aii.mappingtool.tf7.IllegalInstanceExcepti</SAP:P2>
<SAP:P3>on: Cannot create target element /ns1:MT_FAX_CHG_T</SAP:P3>
<SAP:P4>ARGET/IVR/TRANTYPE. Values missing in queue conte~</SAP:P4>
<SAP:AdditionalText />
<SAP:Stack>Runtime exception occurred during application mapping com/sap/xi/tf/_MM_FAXCHG_RFCRESP_; com.sap.aii.mappingtool.tf7.IllegalInstanceException: Cannot create target element /ns1:MT_FAX_CHG_TARGET/IVR/TRANTYPE. Values missing in queue conte~</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Pls advice on this

Jdbc-rfc synchronous scenario

Hi...All,
we r plaing to do JDBC-RFC Synchronous Scenario with out BPM,please tell me any settings are required for this scenario.any body is having any links regarding this type of scenario pls share with me...that is helpfull for me...
thanks in advance,
Pasi.

Hello Pasi,
JDBC-RFC Synchronous Scenario with out BPM,
Go through this links...
JDBC Sync - RFC Sync Scenario without BPM
File - RFC - File without a BPM - Possible from SP 19.
JDBC-RFC-File
Re: jdbc-rfc synchronous
/people/yining.mao/blog/2006/09/13/tips-and-tutorial-for-sender-jdbc-adapter
/people/siva.maranani/blog/2005/09/16/xi-how-to-on-jdbc-receiver-response
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
http://help.sap.com/saphelp_nw04s/helpdata/en/22/b4d13b633f7748b4d34f3191529946/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/22/b4d13b633f7748b4d34f3191529946/content.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10
JDBC-RFC Scnario mapping problem
Thanks,
Satya Kumar
JDBC---RFC will Support Sync?????????

Jdbc-rfc synchronous

Hi...Experts,
we are going to handle JDBC-RFC Synchronous scenario, how can we proceed, what are the settings are to be required and if u have any example sceanrios pls share with me, it would be very helpfull for me..
thanks in advance,
Jain

Hi Jain,
For JDBC (Sender/Receiver )Scenario we have to Install the JDBC Drivers on XI Server.
Use those Driver name and Connection in JDBC Adapter to connect to the Database.
For RFC Sender Adapter we have to create the Program ID in SAP R/3 side.
For RFC Receiver no need of any Extra settings.
step by step RFC to JDBC scenario
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/step%2bby%2bstep%2brfc%2bto%2bjdbc%2bscenario
Tips and Tutorial for Sender JDBC Adapter
/people/yining.mao/blog/2006/09/13/tips-and-tutorial-for-sender-jdbc-adapter
http://help.sap.com/saphelp_nw04s/helpdata/en/22/b4d13b633f7748b4d34f3191529946/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/22/b4d13b633f7748b4d34f3191529946/content.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10
Also you can look at this scenario --> File to JDBC:-
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
/people/yining.mao/blog/2006/09/13/tips-and-tutorial-for-sender-jdbc-adapter
/people/sameer.shadab/blog/2005/10/24/connecting-to-ms-access-using-receiver-jdbc-adapter-without-dsn
/people/saravanakumar.kuppusamy2/blog/2005/01/19/rdbms-system-integration-using-xi-30-jdbc-senderreceiver-adapter
SENDER RFC
Registered server program name which is maintained in the ABAP should be called in the program ID.
for more information follow this links
/people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
/people/shabarish.vijayakumar/blog/2008/01/08/troubleshooting--rfc-and-soap-scenarios-updated-on-20042009
How to test the RFC to Flat File scenario
Type 3 ABAP Connection :
ex 1) If we want to execute any function module from one SAP system in another , we need type 3.
We define an RFC destination say ECC6CLNT100 with required parameters.
and to test it go to SE37, select any common sap function module and when you execute that it will ask
for RFC destination. you provide this destination and the function module will be executed in the target
system.
ex2) when you create a partner profile, you need to create a port and for creating a port, we need to
specify an RFC destination. here also we use type 3.
Type H.
ex1) when we need to send xml messages from an SAP system to any other system, we need this.
For example when we send messages using proxy from SAP system to the integration engine of XI, we
need type H.
Type T.
ex1) To we make an RFC call from R/3 to XI , we use sender RFC adapter in XI.
In R/3 system we need to create an RFC destination of type T.
Different types of RFC are :-
Asynchronous RFC - aRFC
Synchronous RFC - sRFC
Transactional RFC - tRFC
Queue RFC - qRFC
Parallel RFC - pRFC
Chk this link also:
Link :http://help.sap.com/saphelp_nw04/helpdata/en/6f/1bd5b6a85b11d6b28500508b5d5211/content.htm
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken]
Please go through the following links.
/people/bhavesh.kantilal/blog/2006/07/03/jdbc-receiver-adapter--synchronous-select-150-step-by-step JDBC Receiver Adapter -- Synchronous Select Step by Step
/people/yining.mao/blog/2006/09/13/tips-and-tutorial-for-sender-jdbc-adapter Sender JDBC adapter
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
FILE- RFC-FILE Synchronous (Using BPM)
/people/shabarish.vijayakumar/blog/2008/01/08/troubleshooting--rfc-and-soap-scenarios-updated-on-20042009 Trouble Shooting RFC and SOAP Scenario
Regards,
Vinod.

RFC synchronous concurrence

Hi
I have a BPM with a synchronous sender step (BAPI call). This BAPI makes a material reservation , checking previosly if the material is locked. If the material is locked I get an error , the BPM checks this error and I try again (3 times).
My doubts:
1- The rfc call (receiver RFC adapter) does synchronous connection??
2- what happend with the concurrence? If I send two messages in one second why the second BPM , rfc call, does not wait to the first one to finish?? I get an error in the first call the material is locked.
    In the SXMB_MONI I see next times
        First BPM start the rfc call at 12:39:38 and finist at 12:39:42 (error material locked)
        Second BPM start the rfc call at 12:39:39 and finish at 12:39:46. This call finish OK.
I thought the second call should wait to the first one finish.
thanks

Hi Gerardo,
The synchronizity on the BAPI call is just that; Synchronous with the current session. I don't think that PI supports cross BPM session synchronizity (happy to be proven wrong).
There are of course many ways to achieve this (not necessary elegant solutions) and I am sure that you can get some experienced forumists to provide you with samples of how they have resolved this.
Bad sample (assuming that ABAP does not support synchronous calls):
- Wrap the BAPI call in a synchronous Java map (assuming that all your calls run through a common classloader).
Hope you can get some better ones coming through.

Fault message in synchronous send step in BPM

Hi,
When executing a synchronous send step in BPM it is possible to handle application errors (fault messages) with an exception branch. But how do you get hold of the actual data in the Fault message(faultText, faultURL, faultDetail etc) for further processing (mapping)?
Kind regards Johan

Johan,
u have to define another container element in integration process.
For that container element an Async Abstract interface has to created with falult message as the message.
Do u have the fault message defined already...
Also go through this thread.
Fault message handling in BPM
-Naveen.

BPM Error: Synchronous Send Step

Hi All,
I am getting the below error in the synchronous send step of my BPM.
Interface urn:Haworthinc.com:India_Tax SIAA_IndiaTax_DBSelect_TICUSEXT has multiple operations
I am trying to send a query and get data from a table in this step. I have an abstract synchronous interface attached to this step and I have an inbound synchronous interface at the configuration side as the receiver for the BPM sync. interface.
The errored out interface is the abstract interface used as the response message at the BPM sync step.
Does anyone has encountered this before?
additional error info)(
Work item 000000364714: Object CL_SWF_XI_MSG_BROKER method SEND_SYNCHRON cannot be executed
Message no. WL821
Diagnosis
The calling of the object method for the work item ended with a return value for which no handling is modeled in the workflow.
System Response
The work item was forced into the error status.
Procedure
Refer to your workflow system administrator.
Procedure for System Administration
Also check the binding between the task container and the method container.
Appreciate your help!
Regards,
Shiny

Hi,
e urn:Haworthinc.com:India_Tax SIAA_IndiaTax_DBSelect_TICUSEXT has multiple operations
Are u using 7.1 versin of PI, if so can u check if u r consistently using operation name in interface
Babu

RFC Synchronous Sender

Similar Messages

Maybe you are looking for