Right Speaker in tablet/laptop just went out while playing music at 50%

I was listing to some music on here trying out my brand new laptop i just got and the speaker on the right side just went out. someone please help me would like to get this resolved and fixed. I believe i have warrenty on this

Hello Jared2489. Welcome to the HP Forums. I understand a speaker is not producing sound, on your computer. I believe the speaker is broken, but I would like to troubleshoot further. To assist you properly, I do require the following information:
1. The computer's model number. If you require assistance locating this information, please reference this website: Locating the Model Number of the Computer
2. The computer's operating system. If you require assistance locating this information, please reference this website to determine your Windows operating system.
3. Have you installed any new hardware on this computer, before the issue appeared?
4. Have you installed any new software or drivers on this computer, before the issue appeared?
If you are unsure of your product's warranty status, please visit this HP website: HP Warranty Check
Please respond if you require further assistance. I'm only here to help!
Mario
I worked on behalf of HP.

Similar Messages

  • I have an older Power Mac G5 Quad, and my video card just went out. I am trying to find a video card that will work for my Power Mac. I have duel screens but I can't seem to find the appropriate video card

    I have an older Power Mac G5 Quad, and my video card just went out. I am trying to find a video card that will work for my Power Mac. I have duel screens but I can't seem to find the appropriate video card. The serial number on my computer is: RM620603R6W. Apple won't help me because the computer is older than suggested. Please give me the exact video card that will work best for my computer.

    Hi Mike, make sure the card has Mac ROM, or is a PC card with Mac ROMs flashed to it...
    G5 PCIe options are listed here:
    http://www.jcsenterprises.com/Japamacs_Page/Blog/71BBF3EF-9713-4C53-8B80-26771F8 A4087.html

  • My power just went out for a few seconds- is there any way to restore the document I was working on?

    My power just went out for a few seconds. Is there any way to restore my document? I had already had 2 hrs worth of work for an interview tomorrow and do not have time to start from scratch?

    UPS
    http://www.amazon.com/CyberPower-CP1500PFCLCD-Compatible-1500VA-Tower/dp/B00429N 19W/
    Mac OS X Forum
    https://discussions.apple.com/community/mac_os?view=discussions
    Recovery Mode
    http://support.apple.com/kb/HT4718
    TimeMachine 101
    https://support.apple.com/kb/HT1427
    http://www.apple.com/support/timemachine
    General purpose Mac troubleshooting guide:
    Mac OS X: Starting up in Safe Mode - http://docs.info.apple.com/article.html?artnum=107393
    What is Safe Boot, Safe Mode? (Mac OS X) - http://support.apple.com/kb/HT1564
    Isolating issues in Mac OS X
    Creating a temporary user to isolate user-specific problems:
    Isolating an issue by using another user account
    Identifying resource hogs and other tips:
    Using Activity Monitor to read System Memory and determine how much RAM is being used
    Starting the computer in "safe mode":
    Mac OS X: What is Safe Boot, Safe Mode?
    To identify potential hardware problems:
    Apple Hardware Test
    General Mac maintenance:
    Tips to keep your Mac in top form
    You should have TimeMachine saving your work, YOU need to be doing Save As somewhere else as you work, you don't say what application and whether you have Lion 10.7 or later (10.8.4)
    Can't say enough for the importance of using a UPS. Get one and plug your modem, router, computer into one and don't worry about data loss and lost modem or corruption or the effects to electronic devices.
    This forum deals with a desktop/tower 65lb Mac Pro
    http://www.apple.com/support/macpro

  • The power went out while installing the software update..!

    The power went out while installing the new Apple TV software update..! Now the LED flashes all the time, shows the apple logo and never boots.

    I've already tried to restart with no result. I bought the microUSB cable and iTunes recognized it. I restored the firmware with success but when i disconect the usb cable the AppleTV is dead. It doesn't respond (LED is off) when i connect the power or when i use the remote. Now the LED flashes only when i connect it with the microUSB cable. I tried several times to restore the firmware with success but when i disconnect the microUSB, AppleTV seems dead.

  • The sound on my iPhone 4S cuts out when playing music/podcasts.

    The sound on my iPhone 4S cuts out when playing music/podcasts.  If I unplug and replug in the headphones, the sound comes back on, but often for only 20 seconds or so before cutting out again.  Sometimes it will play for 15-20minutes before cutting out.  The track is not "paused", and appears to continue, just no sound.  I tried cleaning the headphone jack with compressed air to no avail.  I also noticed the the same phenomenon occurs when I sync my bluetooth to my car audio.  That is, it will play for a while, then the sound will cut out, even though the track is still shown to be playing.  If I reset the bluetooth, the sound comes back on.
    This started happening about a week ago, but no "event" that I can think of caused it.  I didnt' get the phone wet, forcefully drop it, or leave it in extreme heat.  I've tried doing a reset of the phone.  I also was running iOS5 when I first noticed this, and since upgraded to iOS6.  The problem appeared with both.
    Any help would be greatly appreciated.
    Thanks,
    Steve

    One thing that helped was getting a toothbrush and scrubbing the dock connector on the phone.  I scrubbed the connector and used compressed air for about 1/2 hour till the connector looked much cleaner.  An Apple employee told me that the pins on the phone had a little corrosion and sand.  The problem hasn't gone away completely, but has been significantly reduced.  I'm going to hold out until my contract expires after which time I'll switch to an iPhone5 (or newer) or Android phone.

  • TS1363 I want to use an old 3 GS iPhone that is no longer in service as a phone now as just an iPod to play music. When I connect the phone to the computer with iTunes running, iTunes says it can't connect to the device because it didn't get a valid respo

    I want to use an old 3 GS iPhone that is no longer in service as a phone now as just an iPod to play music. When I connect the phone to the computer with iTunes running, iTunes says it can't connect to the device because it didn't get a valid response from the device. How can I get the system to recognize the phone, and let me rename it as my iPod, instead of my phone?
    As an aside, the current installed operating system on this old iPhone is 4.2.1, but that wasn't one of the selectable options in the operating system list dropdown below. Don't know if that makes any difference.

    Hi maddogdne,
    Welcome to the Support Communities!
    The article below may be able to help you with this.
    Click on the link to see more details and screenshots. 
    Using an iPhone without a wireless service plan
    http://support.apple.com/kb/ht3406
    Cheers,
    - Judy

  • Ipod 4g goes black out while playing games

    i dont know whether you guys have experinced this but my ipod 4g goes black out while playing some games. its like when im playing games half way, the ipood will auto close the app that im playing. Does this means that my ipod is having problem?
    Btw My IPOD 4G WAS JAILBREAK BEFORE.BUT I RESTORE BACK NORMALLY

    See:
    iOS: Troubleshooting applications purchased from the App Store
    Contact the developer/go to their support site if only one app.
    Restore from backup. See:
    iOS: How to back up              
    Restore to factory settings/new iPod

  • My buttons arent working and my screen is just black and its playing music, help me!!

    my buttons arent working and my screen is just black and its playing music, help me!!

    Hello yung_jvyden,
    So your iPhone is on or it wouldn't be playing music yet you can't seem to "wake it up" as the buttons aren't responding.
    There's a section in this article for buttons not responding.
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
    If your device doesn't respond when you press buttons
    Your device might not return to the Home screen when you press the Home button, wake from sleep when you press the Sleep/Wake button, slide to unlock or power off, or it might appear frozen. Try these steps:
    Restart your device.
    If it still doesn't respond, or if it doesn't turn back on, reset your device.
    Note it links to 
    Restart or reset your iPhone, iPad, or iPod touch - Apple Support
    Thank you for using Apple Support Communities.
    Nubz

  • Half my Powerbook G4 Display Just Went Out!

    My promblems started in June when I got one vertical line. In July I got another.
    Now, Half my screen just went blank. No vertical lines. Nothing. Just several fat pink lines in the middle (about 2 inches across) and the rest of my screen is white!
    My 17" screen has now been converted into a 8" screen! When will this end? When will Apple do something about this?

    I hope you're right, but I'm not optimistic. It's hard to imagine that any amount of jostling of the outside of the Powerbook could disturb the display cable inside the hinge without causing visible external damage, but it's not hard to imagine heavy pressure on the display while in transit damaging the LCD panel. I gather that the Powerbook wasn't well packaged on the plane, and may even have been in a piece of checked luggage. That would certainly be a recipe for disaster.
    The "bizarre proprietary screws" used in Powerbooks aren't proprietary at all. They're standard Torx screws, and any good hardware store should have drivers to fit them. You'll need a Torx T-8 and, if you get into the interior of the machine, there are some Torx T-6 screws as well as Phillips #0 screws in there. You're right to wait until you can get the appropriate drivers, though — the screw heads are quite soft and easily stripped if you use the wrong size or kind of screwdriver in them.

  • Why is my laptop making a "glitching" noise while playing music and videos.

    Hi,
    It's hard to explain, but it's just an interrupted noise that happens randomly throughout audio and media. Just started happening out of nowhere.
    Recently I've been having some problems playing back any sort of media.  At regular intervals the audio will freeze/skip for a second and make a loud grinding noise.  This happens with music, streaming videos, games, pretty much everything.  If I'm watching a video or playing a game, the screen will freeze for a second, then remain normal for fewer second and does the same again. This happens every 15 or 20seconds while Playing any kind of media.
    I've tried everything I could think of, updating all my drivers, reinstalling windows, running anit-virus, and cleaning out my system. But nothing helped at all. I wonder what the problem is?
    Though if i reboot  the problem is gone for that particular period. But it comes back again later.
    Please help me with any kind of solution.

    Hi @mahabulislam ,
    To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
    Even though this is a Commercial product, You could reset the BIOS with this document selecting the reloading the BIOS default settings. This would help if something is causing an issue with defaults.
    I have found this to be a help with this issue on all Notebooks.
    Please note remove any and all USB devices. Disconnect all non-essential devices, as these could cause some issues.
    Hope this helps.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Itunes drops out while playing via apple tv

    playing music through iTunes and apple tv drops out when screen on computer shuts down

    If your computer has gone to sleep then the connection will be lost and thus Apple TV will have nothing to access and cut out.

  • Help - DVD/CD just went out!

    This afternoon my DVD drive stopped loading/mounting cds/dvds. It took them in then just moved them in and out of the slot back and fourth.
    I did the PRAM and it made it worse, now the DVD/CD's can't even go into the slot.
    Any ideas on what's going on?
    This came on suddenly with no warning or symptoms.
    Thanks in adance for any help.

    Well, it was toast. Have know idea why it went bad.
    A local Mac repair shop replaced it with an upgraded 8x mce drive with mac drivers for $145 plus $75 labor in 4 hours.
    Apple wanted waaay more time and like $700 for their drive. NOT.
    So, for a tad over $200 I ended up with a nice upgrade and no hassles. Though it would have been nice if it hadn't just quit after very, very little use during the time I've owned the computer.

  • Laptop just powered out

    Hi there, i have a Presanrio CQ60, its just over the 12 month warrenty, first of all it was always overheating, i was on it one night and it just completely powed out, and it wont come on since, the power is not even working on it?, i mean in fairness a laptop only 12 months old and the money that was spent on it and the thing just breaks just as the 12 month warrenty is over, does anyone have any idea what has happened, there is no life in it whatsoever?

    If it was overheating, its likely the heat has damaged the motherboard and killed it.

  • My startup disk just went out in a puff of smoke...

    I just (accidentally) dragged the first volume (which is my startup volume) of my FW HDD from the sidebar of a Finder window onto the desktop, where it disappeared in a puff of smoke. Everything is still running smoothly, but is there anything I can do to make it appear again (in Finder windows) with restarting, and is there anything potentially serious I should be concerned about? (Will that volume appear as usual when I restart?)
    I just want to be sure everything's gonna be OK!

    Went to Go->Computer, and dragged it back to the sidebar. All's well!

  • My Nano's screen Just Went Out

    And I've had it for 17 days. I treated it very nicely, and now the screen just wont turn on. iTunes wont recognize the nano, but my computer will acknowledge that it's plugged in. I can't seem to get it to play any songs, but it's kind of impossible when you dont even know if it's on or not. Anyway, I'm hoping to get a refund. This is unfair.

    check for "hold" button
    if it doesn't work, just exchange it, you have 1 year warranty, and there is a plus YOU'll GET BRAND NEW iPOD without scratches if you have any.

Maybe you are looking for

  • I recently got my GPU error fixed, but now my MacBook Pro shuts down whenever I close the lid.

    I bought my computer in July 2010.  After 3 and a half years I finally discovered there was and an issue.  GPU error. Fine. ok.  I went to the store and even though they were nice enough to fix it for free, I'm now having another issue.  Whenever I s

  • Configure global roles in weblogic express

    Weblogic Express 8.1 sp2 does not allow you to configure global roles using the Admin console. I know this is the expected functionality. How do you configure these global roles without the use of the Admin Console.

  • Setting classpath and library path...

    hello.. i have downloaded the jfreechart1.0.4 for adding chart in my java application...though i have gone through the installation guide...but i havent figured it out how to make the packages available to my java application.... i am very new to jav

  • Digitizer V/LSB ?

    Hello, I am using PXI digitizers (5122 and 5152) with LabView 8.0.  I write the data in I16 binary format to save disk space.  How can I extract the Volts per LSB information to reconstruct the voltages afterwards offline ?  I would like this informa

  • How to hide OpenOffice for PDF Converter

    Hi ALL, I am using OpenOffice.org for converting .doc, .xls, .ppt etc formats to PDF formats using OpenOffice QuickStarter as background process. All the documents are converted successfully but every time this QuickStarter opens-up and clearly seen