RM-604 to RM-598

Hello!
I made an update trough the nokia Ovi Suite to my 7230 (RM-604), when finally i have so many problems to read the data on the phone and also i didn't  put the backup on it.
When I check the version of new soft it says me that I have a RM-598. 
I think that's the problem. Can anyone help me?
Thanks
P.D. excuse for my english

This did it!
find /System/Library/Fonts -type f ! \( -name Keyboard.ttf -o -name LastResort.ttf -o -name LucidaGrande.ttc -o -name HelveticaNeue.dfont -o -name HelveticaNeueDeskUI.ttc\) -exec rm {} \;
You had missed a space after the "("  once I added that it was perfect!
Thanks!
After the script runs our policy in the CasperSuite moves the "standard" fonts we have chosen back into the folder then dumps the users fontcaches and reboots the machine. If anyone is curious here is the script that Casper runs
#!/bin/sh
#Disable Font Protection
atsutil fontprotection -off
#Remove /Library/Fonts Contents
rm -Rf /Library/Fonts/*
#Empty contents of /System/Library/
find /System/Library/Fonts -type f ! \( -name Keyboard.ttf -o -name LastResort.ttf -o -name LucidaGrande.ttc -o -name HelveticaNeue.dfont -o -name HelveticaNeueDeskUI.ttc \) -exec rm {} \;
#Dump Font Caches
atsutil databases -remove
atsutil databases -removeUser

Similar Messages

  • Calculation of Averages

    I need to be able to calculate the average difference between a total average on a single row for example
    Value , AverageTotValue , Difference
    2, 4, -2
    4, 4, 0
    6, 4, +2
    preferably using Discoverer plus (although I could write a function if necessary)
    Can anyone help ?

    Hi , your query as you provided it , returns just one row , whereas mine returns three rows...so , i convert it to the following:
    SQL> select value , avg_total , value-avg_total diff
      2   from
      3   (
      4   select value , (select sum(value)/count(value)
      5  from
      6  (select 2 as value from dual
      7  union all
      8  select 4 as value from dual
      9  union all
    10  select 6 as value from dual)) avg_total
    11  from (select 2 as value from dual
    12  union all
    13  select 4 as value from dual
    14  union all
    15  select 6 as value from dual)
    16  )
    17  /
         VALUE  AVG_TOTAL       DIFF
             2          4         -2
             4          4          0
             6          4          2[pre]
    Now , as regards , the sql statistics...
    Mine
    [pre]SQL> with sample_data as (select 2 as value from dual
      2  union all
      3   select 4 as value from dual
      4   union all
      5   select 6 as value from dual )
      6   select value , avg_total , value-avg_total diff
      7   from
      8   (
      9   select value , (select sum(value)/count(value) avg_total from sample_data) avg_total
    10   from sample_data
    11   );
    Ðñüãñáììá åêôÝëåóçò
       0      SELECT STATEMENT Optimizer=ALL_ROWS (Cost=8 Card=3 Bytes=48)
       1    0   TEMP TABLE TRANSFORMATION
       2    1     LOAD AS SELECT
       3    2       UNION-ALL
       4    3         FAST DUAL (Cost=2 Card=1)
       5    3         FAST DUAL (Cost=2 Card=1)
       6    3         FAST DUAL (Cost=2 Card=1)
       7    1     VIEW (Cost=2 Card=3 Bytes=48)
       8    7       VIEW (Cost=2 Card=3 Bytes=9)
       9    8         TABLE ACCESS (FULL) OF 'SYS_TEMP_0FD9D6608_7E7090' (
              TABLE (TEMP)) (Cost=2 Card=3 Bytes=39)
    ÓôáôéóôéêÜ
              2  recursive calls
              8  db block gets
              9  consistent gets
              1  physical reads
            604  redo size
            598  bytes sent via SQL*Net to client
            508  bytes received via SQL*Net from client
              2  SQL*Net roundtrips to/from client
              0  sorts (memory)
              0  sorts (disk)
              3  rows processed
    Yours
    SQL> select value , avg_total , value-avg_total diff
      2   from
      3   (
      4   select value , (select sum(value)/count(value)  
      5  from
      6  (select 2 as value from dual
      7  union all
      8  select 4 as value from dual
      9  union all
    10  select 6 as value from dual)) avg_total
    11  from (select 2 as value from dual
    12  union all
    13  select 4 as value from dual
    14  union all
    15  select 6 as value from dual)
    16  );
    Ðñüãñáììá åêôÝëåóçò
       0      SELECT STATEMENT Optimizer=ALL_ROWS (Cost=6 Card=3 Bytes=48)
       1    0   VIEW (Cost=6 Card=3 Bytes=48)
       2    1     VIEW (Cost=6 Card=3 Bytes=9)
       3    2       UNION-ALL
       4    3         FAST DUAL (Cost=2 Card=1)
       5    3         FAST DUAL (Cost=2 Card=1)
       6    3         FAST DUAL (Cost=2 Card=1)
    ÓôáôéóôéêÜ
              0  recursive calls
              0  db block gets
              0  consistent gets
              0  physical reads
              0  redo size
            598  bytes sent via SQL*Net to client
            508  bytes received via SQL*Net from client
              2  SQL*Net roundtrips to/from client
              0  sorts (memory)
              0  sorts (disk)
              3  rows processedCoclusion: Yours is much less costly to system and so quicker.....
    I have to confess that i have not thought this format ........I have learned something today....!!!!!!
    I have get accustomed to using the with clause... but i may reconsider it....!!!!!!
    Thanks , a lot for your valuable remarks....(as always)...!!!!
    Simon

  • Did you know that verizon charges ¢50 for calls from the US to Canada?  Just dialing an area code like 604 (Vancouver, CA), will create charges at a rate of ¢50/minute.  Amazing that they can charge this much for a call to Canada.  I know they have it som

    Did you know that verizon charges ¢50 for calls from the US to Canada?  Just dialing an area code like 604 (Vancouver, CA), will create charges at a rate of ¢50/minute.  Amazing that they can charge this much for a call to Canada.  I know they have it somewhere in their contract/website.

    Did you know that verizon charges ¢50 for calls from the US to Canada?  Just dialing an area code like 604 (Vancouver, CA), will create charges at a rate of ¢50/minute.  Amazing that they can charge this much for a call to Canada.  I know they have it somewhere in their contract/website.

  • SAP NFE 3.10 - Erro 598 - Rejeicao: NF-e emitida em ambiente de homologação com Razão Social...

    Olá, pessoal.
    Estamos fazendo a atualização da NF-e 2.00 para o leiaute 3.10, porém, estamos recebendo o seguinte retorno:
    598 - Rejeicao: NF-e emitida em ambiente de homologação com Razão Social diferente de 'NF-E EMITIDA EM AMBIENTE DE HOMOLOGACAO – SEM VALOR VISCAL'.
    Para a NF-e leiaute 2.00, temos a BADI (no GRC) /XNFE/006_SIGN_NFE_OUT na qual podemos implementar para atender a necessidade da modificação do nome do destinatário para o nome exigido pela SEFAZ, porém, para o leiaute 3.10, não encontramos BADI no GRC para fazer o tratamento.
    Alguem passou pelo mesmo caso? encontrou algum ponto onde deveremos modificar o nome do destinatário?
    Desde já, muito obrigado.
    Att.,
    Fábio Cirino

    Opção mais simples.
    Coloca essa regra na BADI CL_PRINT do ECC, no Método FILL_HEADER:
        FIELD-SYMBOLS: <fs_xmlh>    TYPE j1b_nf_xml_header.
        UNASSIGN <fs_xmlh>.
        ASSIGN (c_xmlh) TO <fs_xmlh>.
        IF <fs_xmlh> IS ASSIGNED.
          MOVE-CORRESPONDING <fs_xmlh> TO out_header.
    *** NF-e Block E - Tag: Destino - Nome
          IF in_xml_header-tpamb = '2'.
            <fs_xmlh>-e_xnome = 'NF-E EMITIDA EM AMBIENTE DE HOMOLOGACAO - SEM VALOR FISCAL'.
          ENDIF.
        ENDIF.
    Abç.,
    Baroni

  • Satellite 1410-604 - BIOS update Incorrect BIOS update in the web?

    Hi there again!
    Now with a new and weird matter.
    We all know that old say... "If it is not break, don't fix it". And if you put it into more informatic terms, "specially if it is a BIOS".
    Yes, we all know that the BIOS is something quite dellitate to handle. For some reason we normally feel like if we were handling something like nitro-glycerine, or some radioactive product. And this is because we all know what is being put in risk in that moment: our (or sometimes others) computer, the full system could end as dead as some pieces of metal, plastic, and wires.
    Well. I passed through all of that more than ten times in my life, and only once it went wrong. But since that old motherboard was already dead, It was not important. But I allways was EXTREMELY care. I allways cross checked everything before doing anything, allways got a backup and a way to restore that backup... and allways did this in COMPAQ systems, that were prepared that way. Updating a BIOS was just about preparing a disk, turn on the PC with the disk in the diskette drive, and wait. And if you didn't like the results, you simply click "return to previus BIOS" and that was it... very nice. And easy.
    Few days ago, a friend brought me a Toshiba Satellite 1410-604 to solve some issues that were driving him crazy. After removing an expired Norton Internet Security, install avast and scan, I found more than one hundred files infected with a wide variety of virus, malware, trojans, and whatever you could imagine. Avast removed them all, but the remains of the operating system was so unstable that we decide to format and install from scratch.
    I asked for the restoration disks, that obviously he don't have because they were lost in one of his movings. After we got the confirmation from Toshiba reps that there are no recovery disk available for this model, because it is too old, we decided to install from scratch like any other normal PC, and resigned to loose some of the utilities that come with that CDs and that are not available for download in the website.
    I downloaded all of the software available for this model, including two BIOS updates. (Actually only one update, but in two versions: Windows and Traditional), and prepared a CD with all the drivers and programs just like if it were a brand new system install. And everything went very well, no problems at all. Until we got to the Wireless LAN card, but that is another issue that is already solved (the mini PCI card for the WLAN does not support WEP or WAP encription, and it is not possible to connect to any wireless LAN encripted).
    At this point, and when I started configuring and enabling PCMCIA devices, and USB devices (this computer only supports USB 1.1 not 2.0) I discovered this text in the Toshiba Website:
    "This Bios Update adds increased functionality to your system.
    (BIOS is an acronym for Basic Input and Output System. This program is stored in a Read-Only Memory chip on the motherboard.
    When the computer powers up, the BIOS is launched to perform various start-up functions.)
    For detailed update information please refer to Toshiba BIOS-Update Information"
    (you can find this here:
    [http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU] you have to look for:
    Archive
    Satellite
    Satellite 14xx
    Satellite 1410-604
    PS141E
    Quite specific. Isn't it?)
    According to the information in that same website, the BIOS available fits the following models:
    "Satellite 2410-414, Satellite 1410, Satellite 1410-654S, Satellite 1410-814, Satellite 2410-303, Satellite 2410-304S, Satellite 1410-354, Satellite 2410-601, Satellite 1410-401, {color:#ff0000}*Satellite 1410-604*{color}, Satellite 2410-404, Satellite 1410-301, Satellite 1410-304, Satellite 2410-S403, Satellite Pro 2100, Satellite 1410-S203, Satellite 2410-304, Satellite 1410-554, Satellite 1410-S102, Satellite 1410-354E, Satellite 2410-703, Satellite 1410-303, Satellite 2410-S203, Satellite 1410-801, Satellite 2410-603, Satellite 1410-902, Satellite 1410-313, Satellite 1410-802, Satellite 1410-714, Satellite 2410-354, Satellite 2410-514, Satellite 1410-614, Satellite 1410-704, Satellite 2410-515, Satellite 2410-504, Satellite 2410-702, Satellite 1410-S103"
    Yes... it's there!
    Now, when you go to the "Toshiba BIOS-Update Information", you get:
    "FAQ Ref.: TRO0000000b07
    A BIOS update is a {color:#ff0000}*relatively simple operation and can be carried out by most competent computer users*{color}. All BIOS upgrades can be obtained from "BIOS Update" Download Section click here..
    Note: The BIOS files are machine specific so the correct BIOS for your machine must be used."
    Please note that Toshiba does not disencourage the handling of BIOS, on the contrary: they even encourage people to do so. This is not necessary bad, but at the same time they encourage people to 'play around' with such a delicate matter, at the end of that same page, in little letters they say:
    "Toshiba provides this information "as is" {color:#ff0000}*without warranty of any kind*{color}, either expressed or implied, including, but not limited to, the implied warranties of merchantability or fitness for a particular purpose. Toshiba shall not be responsible for the topicality, correctness, completeness or quality of the information provided. {color:#ff0000}*Toshiba is not liable for any damage caused by the use of any information provided, including information that is incomplete or incorrect*{color}."
    This should trigger yellow alarms in our minds.
    +"Human error is inherent to humans, and it is not possible to erradicate. It will allways appear, sooner or later" (Prof. James Reason).+
    And finally I made the mistake. Even though I read that warning, I remembered all those successfull BIOS update with COMPAQ, and relied in Toshiba. That update was available there, and Toshiba was telling me that it was for this computer. Great!
    So finally I unplugged all devices (USB), removed the PCMCIA (WLAN),plugged the battery charger to avoid any possible battery problem, restarted windows, and then from within windows I started the updater (windows version, as recommended by Toshiba). Everithing looked fine, nothing different of what I used to see on those old COMPAQs.
    As warned by the updating program, the system was going to reboot. And actually it did so.
    Windows closed quite normally (a bit quicker than normal, but without errors, and since there were no other programs than the essentials -even the antivirus was not running-), the computer switched of, all lights off (normal), and then it switched on again...
    {color:#0000ff}*BEEEEEEEEEEEEP... BEEEP... BEEEEP...*{color}
    OMG! I never espected something THAT bad. 3-1-1!
    And now... What a 3-1-1 stands for here? Award BIOS would mean no video card or deffective video card, but it is not true, since it was working up to 20 seconds ago. It must be the BIOS.
    It never came again to life. It is still beeping 3-1-1.
    But now comes the investigation of the human-factors involved in this accident.
    I found I commited the following failures:
    *(1)* To rely in the manufacturer, even though they WROTE their information could be wrong or incomplete. (BAD if I were a QA&QC inspector).
    *(2)* I didn't cross checked deeply enough (until it was already too late).
    *(3)* I didn't looked previously for the way to make a backup of the BIOS, in order to restore should anything go wrong.
    *(4)* Let Toshiba lead me to a path I didn't want to walk, just because of their offer of "increased functionality".
    *(5)* Beleave in Toshiba when they said "relatively simple operation and can be carried out by most competent computer users"... they never said it is failproof.
    Then I started the most interesting part of the investigation.
    {color:#0000ff}*"What went wrong?"*{color}
    Obviously, the BIOS update failed somehow, somewhere. And I wanted to know what and where.
    First thing I discovered was that there are another search engine in Toshiba called "askiris" ([http://askiris.toshiba.com]) and I looked there in order to see if for any chance I could get the old 1.20 BIOS version that was installed originally in that machine.
    And I found something... VERY interesting:
    bq. {color:#800080}*From: * \\ {color}{color:#800080}* ACPI Flash BIOS version 1.10 for Satellite 1410/1415/2410* \\ {color}{color:#800080}* bios for these models. TAIS. Downloads. DL. 105481 289838 289838 ACPI Flash BIOS version 1.10 for Satellite 1410/1415/2410. 2002-10-04. 105589...* \\ {color}{color:#800080}* Published 10/4/02* \\ {color}{color:#800080}* From: * \\ {color}{color:#800080}* ACPI Flash BIOS version 1.40 for Satellite 1410/1415/2410/2415* \\ {color}{color:#800080}* FDD Version 1.30 TAIS. Downloads. DL. 105481 357972 357972 ACPI Flash BIOS version 1.40 for Satellite 1410/1415/2410/2415. 2003-01-31. 105589 PUB...* \\ {color}{color:#800080}* Published 1/31/03 | Rating:* \\ {color}{color:#800080}* From: * \\ {color}{color:#800080}* ACPI Flash BIOS version 1.20 for Satellite 1410/2410* \\ {color}{color:#800080}* error message during BIOS TAIS. Downloads. DL. 105481 305240 305240 ACPI Flash BIOS version 1.20 for Satellite 1410/2410. 2002-11-01. 105589 PUB...* \\ {color}{color:#800080}* Published 11/1/02 | Rating:* \\ {color}{color:#800080}* From: * \\ {color}{color:#800080}* ACPI Flash BIOS version 1.30 for Satellite 1410/1415/2410* \\ {color}{color:#800080}* 1) Changed the content TAIS. Downloads. DL. 105481 330963 330963 ACPI Flash BIOS version 1.30 for Satellite 1410/1415/2410. 2003-01-03. 105589...* \\ {color}{color:#800080}* Published 1/3/03 | Rating:* {color}
    Those are: V110, V140, V120 and V130 for series 1410/15 and 2410.
    GOOD! Or not?
    Let's take a look:
    First thing I did was download everything all four files.
    Then I took the same version that made the crash: 1.40
    Than I uncompressed the file, and I found:
    06/05/2009 00:17 &lt;DIR&gt; .
    06/05/2009 00:17 &lt;DIR&gt; ..
    31/01/2003 08:38 1,605,632 11410v14.iso
    31/01/2003 08:38 511,764 1370D14.EXE
    {color:#ff0000}*08/01/2003 17:03 724,480 2410a9v140.exe*{color}
    09/01/2003 09:32 250,663 biofca9t.com
    08/10/2002 05:26 30,697 chgbiosa.exe
    31/01/2003 08:36 1,087 instinfo.bat
    13/05/2002 15:25 378,175 launcher.exe
    31/01/2003 08:36 433 launcher.ini
    06/05/2009 00:17 0 list.txt
    31/01/2003 08:36 14,768 readme.com
    *{color:#ff0000}31/01/2003 08:36 12,513 readme.txt{color}*
    11 archivos 3,530,212 bytes
    3 dirs 9,404,600,320 bytes libres
    And I got my first surprise here: There is a {color:#ff0000}*README.TXT*{color} that was not present in the file I downloaded previously from the drivers repository.
    So I went to the readme.txt and I found this:
    "README.TXT 01-31-2003 CDC
    Flash BIOS version 1.40 for Satellite 1410
    This BIOS is applicable to the following models:
    Satellite 1410-S105
    Satellite 1410-S106
    Satellite 1410-S173
    Satellite 1410-S174
    Satellite 1410-S175
    Satellite 1410-S176
    Satellite 1415-S105
    Satellite 1415-S106
    Satellite 1415-S115
    Satellite 1415-S173
    Satellite 1415-S174
    Satellite 1415-S175
    Satellite 1415-S176
    Satellite 2410-S203
    Satellite 2410-S204"
    Please note that the model 1410-604 is *NOT* listed.
    I thought "well, it must be another archive..."
    But then I realized of a name that sounds familiar, it was there, in the directory where I uncompressed this 1.40 file, and the name is:
    {color:#0000ff}*2410A9V140.EXE*{color}
    So I took the other file, the BIOS_Win update, and I discovered that the file name is:
    *{color:#0000ff}2410A9V140.EXE{color}* (Ups!)
    So I uncompressed it again, to find:
    El volumen de la unidad D no tiene etiqueta.
    El n&pound;mero de serie del volumen es: 8838-E175
    Directorio de D:\Shared\diskette\2410A9v140
    06/05/2009 00:43 &lt;DIR&gt; .
    06/05/2009 00:43 &lt;DIR&gt; ..
    *{color:#0000ff}09/01/2003 09:32 _250,663_ BIOFCA9T.COM{color}*
    17/07/2002 03:38 35 biosupd2.ini
    13/07/2001 13:22 6,277 chgbios2.vxd
    *{color:#0000ff}08/10/2002 04:26 _30,697 _CHGBIOSA.EXE{color}*
    09/11/2001 09:14 134 clean2.reg
    17/07/2002 03:35 342,064 install2.exe
    16/07/2002 06:55 241,664 nchgbios2.exe
    18/08/2001 11:41 3,435 nchgbios2.sys
    23/10/2001 18:55 11,476 nchgbios2NT.sys
    26/08/2001 09:00 49,152 nchgbios2svc.exe
    13/07/2001 17:05 49,152 tbdecode.dll
    14/03/2002 06:42 49,152 TCHGBIOSInfo.dll
    21/06/2002 11:25 1,796 tosclean2.bat
    09/11/2001 12:01 967 tosclean2.pif
    21/06/2002 11:34 1,841 toscleanAUTO2.bat
    21/06/2002 11:44 1,796 toscleanSMS2.bat
    21/06/2002 08:51 2,038 tosntclean2.bat
    21/06/2002 08:51 2,084 tosntcleanAUTO2.bat
    21/06/2002 08:52 2,038 tosntcleanSMS2.bat
    20 archivos 1,046,461 bytes
    2 dirs 9,402,793,984 bytes libres
    No readme file...
    Then another question arised in my mind: What about the other 1.40 file? What does the other 2410A9V140.EXE have inside?
    This:
    El volumen de la unidad D no tiene etiqueta.
    El n&pound;mero de serie del volumen es: 8838-E175
    Directorio de D:\Shared\diskette\comparacion_toshiba\askiris\241 0a9v140
    06/05/2009 00:46 &lt;DIR&gt; .
    06/05/2009 00:46 &lt;DIR&gt; ..
    *{color:#0000ff}09/01/2003 09:32 _250,663 _BIOFCA9T.COM{color}*
    17/07/2002 03:38 35 biosupd2.ini
    13/07/2001 13:22 6,277 chgbios2.vxd
    *{color:#0000ff}08/10/2002 04:26 _30,697 _CHGBIOSA.EXE{color}*
    09/11/2001 09:14 134 clean2.reg
    17/07/2002 03:35 342,064 install2.exe
    16/07/2002 06:55 241,664 nchgbios2.exe
    18/08/2001 11:41 3,435 nchgbios2.sys
    23/10/2001 18:55 11,476 nchgbios2NT.sys
    26/08/2001 09:00 49,152 nchgbios2svc.exe
    13/07/2001 17:05 49,152 tbdecode.dll
    14/03/2002 06:42 49,152 TCHGBIOSInfo.dll
    21/06/2002 11:25 1,796 tosclean2.bat
    09/11/2001 12:01 967 tosclean2.pif
    21/06/2002 11:34 1,841 toscleanAUTO2.bat
    21/06/2002 11:44 1,796 toscleanSMS2.bat
    21/06/2002 08:51 2,038 tosntclean2.bat
    21/06/2002 08:51 2,084 tosntcleanAUTO2.bat
    21/06/2002 08:52 2,038 tosntcleanSMS2.bat
    20 archivos 1,046,461 bytes
    2 dirs 9,402,781,696 bytes libres
    *{color:#ff0000}They both have 20 files, and 1,046,461 bytes. I asumed they are both the SAME file{color}*.
    And the readme file does not list the model 1410-604 in its readme file, therefore I cannot explain this except as a mistake from Toshiba. *{color:#ff0000}They put an incorrect BIOS in their website, and suggested the update, and somehow leaded to this kind of errors.{color}*
    (Except in the case that one of those models is a different name of the 1410-604 model, and if it is the case... now I don't know why this BIOS do not work with this computer).
    The worst part is that neither of those other files (V1.10, 1.20 and 1.30) lists the 1410-604, therefore there seems no possible workaround for this problem. I need an original v1.20 for this CMOS, and Toshiba seems not to have it. They offered me to solve the problem, by leaving the notebook at an ASP, and paying only 95&euro; for the work and about 280&euro; for a motherboard replacement, I will get it solved. But they offer no warranty of their possibilities because is a model 'too old' and 'discontinued' and with 'no support'...
    In other words, they said "don't bother with this, just go out there and buy a new one" (something absolutely out of my scope in this crisis-time) :P
    Thank you for reading soooo far.
    Now what I need is to get any ideas of a workaround for this, my ideas are:
    (1) This CMOS has a boot-part that still works (it allows a roll-back if you have the appropriate file). So I need a good BIOS to burn into the CMOS, from the VERY SAME model (a BIOS backup) but the backup must be adequate for the burning program (CHGBIOSA.COM).
    (2) It is still possible that the BIOS could be OK but the data on the CMOS got somehow corrupted. If so, clearing the CMOS could solve de problem. But I was not able to find a clear cmos button from outside, and after disasembling I took of the battery, with no good results. I have to try leaving the MOBO without battery for longer period (I left it about 20 seconds) just in case 20 seconds don't allow all the capacitors to fully go to zero values. I have not much hope in this point.
    (3) Try to get a REAL good update from Toshiba. I contacted several times technical support, and I was able to verify they are only phone-operators, with a script in front of them, and when the problem goes-out-of-scope they fall always in the same answer: "you have to go to an ASP". I still have a low hope to find someone who really knows a bit, and could enlighten with a good BIOS to put in this disks.
    (4) As far as I could find, this BIOS is not from any known BIOS-maker. It seems it has been developed by Toshiba (own brand), therefore the Crisis Recovery Disk from Phoenix will not be of any help here. As well as any other BIOS recovery tool not designed for Toshiba's BIOS. But I'm open to any ideas, that could be tested more or less safely. (Remember that the 'BIOS-BOOT-PART' feature is still working, I don't want to loose this only possibility of redemption).
    Wwwaaaaoooowww... what a long-post falks! Sorry for that!
    Forgive me, but I wanted to be really clear.
    Should anyone give some hints or advice, will be greatly appreciated.
    Please don't say what I shouldn't do... I already know that. I already researched and already found my mistakes, in order not to repeat them. Now I need to move on, to advance, and to try to solve this, or at least learn how to solve similar things. As much as possible.
    Thank you again, in advance, and sorry again.
    FenixDigital
    Message was edited by: Fenix_D
    Changed subject to beter reflect what is the matter about (apparently erroneous BIOS file in Toshiba download center).

    Well.<br />
    <br />
    It's not dead, certainly.<br />
    <br />
    The steps that I put in my procedure were:<br />
    <br />
    --&gt; There are two memory sims, that I am going to identify as M1 and M2<br />
    --&gt; There are two memory banks, that I am going to identify as A and B<br />
    <br />
    Next step in order to identify if there are some module or bank that is not working properly are:<br />
    <br />
    The modules were installed as:<br />
    <br />
    M1 --&gt; A<br />
    M2 --&gt; B<br />
    <br />
    <strong>1--&gt; Boot without any memory chip.</strong><br />
    <br />
    <blockquote>
    A--&gt; X<br />
    B--&gt; X<br />
    </blockquote>
    <br />
    <strong>2--&gt; Boot with ONE module</strong><br />
    <br />
    <blockquote>
    A--&gt;M1<br />
    B--&gt;X<br />
    </blockquote>
    <br />
    <strong>3--&gt; Boot with the OTHER module</strong><br />
    <br />
    <blockquote>
    A--&gt; X<br />
    B--&gt; M2<br />
    </blockquote>
    <br />
    <strong>4--&gt; Boot with BOTH modules swapped:</strong><br />
    <br />
    <blockquote>
    A--&gt; M2<br />
    B--&gt; M1<br />
    </blockquote>
    <br />
    <strong>5--&gt; Boot with ONE module swapped:</strong><br />
    <br />
    <blockquote>
    A--&gt; M2<br />
    B--&gt; X<br />
    </blockquote>
    <br />
    <strong>6--&gt; Boot with the OTHER module swapped:</strong><br />
    <br />
    <blockquote>
    A--&gt; X<br />
    B--&gt; M1<br />
    </blockquote>
    <br />
    At this point I got a great difference. It booted, finally. But in order to make a diagnostic, I have to complete the full test, and the results were:<br />
    <br />
    1--&gt; Boot without any memory chip.<br />
    <br />
    A--&gt; X<br />
    B--&gt; X<br />
    <br />
    <strong>NOT BOOTING</strong> Actually the computer not even tries to read the disk. Only the power led turns on, but even prior to press the 'on/off' button. I think this indicates 'no memory installed'. I would have expected a post failure beeps, but there were no beeps at all.<br />
    <br />
    2--&gt; Boot with ONE module<br />
    <br />
    A--&gt;M1<br />
    B--&gt;X<br />
    <br />
    <strong>BOOTED NORMALLY</strong> Well. This obviously means that the 3-1-1 beep code means memory error, or one bank failing of two installed. Now I didn't know if the problem was the module, or the bank B.<br />
    <br />
    3--&gt; Boot with the OTHER module<br />
    <br />
    A--&gt; X<br />
    B--&gt; M2<br />
    <br />
    <strong>NOT BOOTING</strong> Just like the condition in 1. Like no memory installed, therefore there are two possibilities: The bank B is not working, or the memory module M2 is not working.<br />
    <br />
    4--&gt; Boot with BOTH modules swapped:<br />
    <br />
    A--&gt; M2<br />
    B--&gt; M1<br />
    <br />
    <strong>NOT BOOTING</strong> Just like previous to test condition. Beep code 3-1-1, no boot at all.<br />
    <br />
    5--&gt; Boot with ONE module swapped:<br />
    <br />
    A--&gt; M2<br />
    B--&gt; X<br />
    <br />
    <strong>NOT BOOTING</strong> This was the important test, because it finally let me determine that the problem is at the module 2 (M2) not at the bank B. But still there could be a failure IN THE BANK B and IN THE MEMORY MODULE 2. Have to do the other test.<br />
    <br />
    6--&gt; Boot with the OTHER module swapped:<br />
    <br />
    A--&gt; X<br />
    B--&gt; M1<br />
    <br />
    <strong>BOOTING NORMALLY</strong> This really confirmed there is nothing wrong with ANY bank, but one of the modules is not working, actually is not being even detected. This is quite weird, because this computer was working perfectly with those two modules, and in the moment of the BIOS upgrade it seems to fail... How come?<br />
    <br />
    Something weird happened here. I don't know what, but something ruined one memory module (fortunately only one), what I would like to know now is what happened. But at least I have the machine running, with very low memory, but running.<br />
    <br />
    What I am thinking now is what about this BIOS upgrade makes the motherboard not to recognize one of the modules for some reason?<br />
    <br />
    <img class="jive-emoticon" src="images/emoticons/happy.gif" border="0" alt=":)" /><br />
    <br />
    I will continue my research, but certainly the memory made the difference.<br />
    <br />
    I am not sure why I didn't discover this before, I think I didn't perform this test before, for two reasons:<br />
    <br />
    (1) I tried to boot with no memory, and this was impossible, so I assumed that the problem was not at the memory.<br />
    <br />
    (2) When I heard the beep code (3-1-1), somewhere I read it was a video problem, and I asume most probably it was a video problem (since no video at all was being displayed) but I should have take into consideration that Phoenix BIOS also means with the same 3-1-1 a DMA problem (memory problem).<br />
    <br />
    Okis... It's a pitty having to wait so much between a post and it's approval. I posted my answer two days ago, and since it didn't appear, I believe It didn't upload, so I replied again, and also didn't appeared... until now. It is obvious that a moderator approval is required. That's why I have to wait 24 hours or more to read my post. This slows this forum effectiveness.<br />
    <br />
    Thank you very much for your help. I'll keep you informed. Until we get to a final diagnosis and solution.

  • HTML DB 10g installation problem on linux HTTP-503 ORA-604

    I have a problem after the installation of HTML DB from the linux 10g R2 companion image.
    I installed HTML DB and HTTP server in one go, on an new system that only has the default orcl database installed. I run Red Hat enterprise linux on a x86_64 system.
    The HTML DB installation took a long time, but gave no errors.
    When I access the http://hostname:7777/pls/htmldb url I get an “This server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.”-error.
    But :7777 works fine and give me the http server default page.
    In my Apache error log I see the following errors:
    [Thu Dec  8 13:28:42 2005] [error] [client 10.11.121.20] [ecid: 1134048522:10.14.66.23:28193:0:1,0] mod_plsql: /pls/htmldb/htmldb HTTP-503 ORA-604
    I looked at several internet sources, played with my marvel.conf and my dads.conf but to no avail. My oracle home is different from my html db home. There is no ./network/admin/tnsnames.ora in my HTML_DB _HOME. Should there be? One solution in the faq even told me to copy the htmldb tnsnames.ora over my db tnsnames.ora, but the installation did not create one for me.
    When should I use a dads.conf instead of marvel.conf? I don't understand the need for this second file. I tried to also use it, because some solutions and the post-installation instructions hinted on doing it. But then I get a different error in the logs about a double DAD.
    When I login through sqlplus in the orcl database with the HTMLDB_PUBLIC_USER and my password (that was created during the installation) it works, but I don't see any tables (yet?). So the account is not locked. But should I see some tables when I do “select table_name from user_tables; ?
    I probably missing something obvious here, but I'm a bit of a oracle newby.
    Any help is appreciated,
    Erik

    Thanks Diemar,
    It worked.
    I stopped all oracle process and services.
    I then logged out and in again as oracle to see if the unset stuck.
    I then started my listener, databases, isqlnet and em.
    I then started the httpd with:
    ${HTMLDB_HOME}/opmn/bin/opmnctl start
    opmnctl: opmn started
    ${HTMLDB_HOME}/opmn/bin/opmnctl startproc
    this still gave some errors and the httpd was not started:
    ias-component=HTTP_Server
    opmnctl: starting opmn managed processes...
    ================================================================================opmn id=aberlour.uni.mdx.ac.uk:6200
    0 of 1 processes started.
    ias-instance id=standalone
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ias-component/process-type/process-set:
    HTTP_Server/HTTP_Server/HTTP_Server
    Error
    --> Process (pid=3389)
    failed to start a managed process after the maximum retry limit
    Log:
    /mdx/app/oracle/product/10.2.0/http/opmn/logs/HTTP_Server~1
    last lines in this log where:
    05/12/08 15:18:50 Stop process
    /mdx/app/oracle/product/10.2.0/http/Apache/Apache/bin/apachectl stop: httpd stopped
    05/12/08 15:31:55 Start process
    /mdx/app/oracle/product/10.2.0/http/Apache/Apache/bin/apachectl start: execing httpd
    05/12/08 15:31:57 Start process
    /mdx/app/oracle/product/10.2.0/http/Apache/Apache/bin/apachectl start: execing httpd
    I then added the PlsqlNLSLanguage line back into the marvel.conf
    which now looks:
    AddType text/xml xbl
    AddType text/x-component htc
    Alias /i/ /mdx/app/oracle/product/10.2.0/http/Apache/Apache/images/
    <Location /pls/htmldb>
    Order deny,allow
    PlsqlDocumentPath docs
    AllowOverride None
    PlsqlDocumentProcedure wwv_flow_file_manager.process_download
    PlsqlDatabaseConnectString xxxxxx.xxxxx.ac.uk:1521:orcl ServiceNameFormat
    PlsqlNLSLanguage "ENGLISH_UNITED KINGDOM.AL32UTF8"
    PlsqlAuthenticationMode Basic
    SetHandler pls_handler
    PlsqlDocumentTablename wwv_flow_file_objects$
    PlsqlDatabaseUsername HTMLDB_PUBLIC_USER
    PlsqlDefaultPage htmldb
    PlsqlDatabasePassword @BWIuxxxxxxxxxxxxxxxxxxxxxxid4Y4t8b9g==
    Allow from all
    </Location>
    and I started the http again, and it works fine.
    Problem solved. I will try to fine tune it so I'll get the basic LANG setting back in linux but without the .UTF-8 postfix.
    thanks for your help,
    Erik

  • Oracle error ORA-604 when opening a connection

    I am facing an issue with my WCF service which is using ODP.NET version 4.112.2.0(x64) and Oracle 11g.
    The service runs without any problems on the test servers but on production server (Windows 2008 R2) when an attempt is made to call any service method it fails with the following Oracle error code Ora-604. the message is
    ORA-604: error occurred at recursive SQL level %s
    The exception is thrown when a call to meethod Open is made to open a connection.
    There is no inner exception. So far I have tried checking the connection string, the user permissions and setting the TNS_ADMIN environment variable but nothing has worked.
    Another thing to mention is that another WCF service which uses some of the same stored procedure I am using is working fine on the same server.
    Has anyone seen this before?
    Thanks,
    A

    Do you have a login trigger?
    select * from dba_triggers where triggering_event like 'LOGON%'
    If so, try disabling it.
    Does the working service use the same credentials as this problem service?
    Are you able to connect using sqlplus, with the same credentials from the same client to the same database? If it's not an ODP.NET specific problem, the dba guys might be able to help better: General Database Discussions
    Greg

  • Satellite M30-604 - Hard disk mechanical failure

    My satellite M30-604 is within warranty (bought 10 months ago) and my Hitachi travelstar hdd crashed out of the blue. The crash is probably mechanical so I can not use data recovery software (it makes things worse). The only way to get my data is to give the HD to some specialist who will open it in a "clean room" for something like 300 - 600 Euros (!) and try to recover as much as possible. Now:
    -> Toshiba says that if I do that the warranty is void and I will also have to pay for a new disk (+ 100 euros)
    -> If I want to replace the disk (warranty) then toshiba gets the old disk and I lose my data forever!!!
    WAIT A MINUTE GUYS!!!
    a) this is my data, my work and you CAN NOT blackmail me with this "warranty void" stuff. I want my old crashed disk back! I want to try to recover as much as I can! my 10-hours-a-day work is IN there!
    b) Moreover even if the heads of the disk crashed, my PERSONAL, PRIVATE data are still in the disk and CAN be read with special techniques. How can toshiba (or any other company for that matter) ask me to hand it over to them?
    What should I do?
    What would you do?

    Hi there,
    I sympathise with your problem and can only suggest the following thoughts :
    1. Recovery of your data would seem the most important factor here. I would suggest removing the HDD yourself so that it can be sent to a specialist to recover what data is possible.
    2. Since removal of the HDD does not usually involve extensive dismantling of the notepad it should not invalidate the remaining warranty (other than on the HDD itself).
    3. A replacement HDD can usually be obtained quite cheaply from one of the internet sellers (check using GOOGLE for a suitable replacement). you can then re-install your operating system from the recovery CDs.
    4. I would suggest investing in a suitable backup software package (such as Norton Ghost) to avoid this problem in the future. (I have had four replacement HDDs on my Satellite A30 in the last 12 months).
    HTH

  • Satellite P20-604 - How do I tell if it has a wireless card or not?

    I have a P20-604, which I suspect was not pre-installed with a wireless card. Just to make certain my details are:
    Model No: PSP20E-0Du43-G3
    Serial No: 14735613G
    If it doesn't have a wireless card, how can I determine which parts to buy so I can set up a wireless connection?
    thank you.
    Seem

    Hello
    As far as I know the wireless card is optional on this unit. This means that you have a possibility to upgrade the unit with the miniPCI wireless card. At the bottom of the unit you will find a slot for this card.
    Please visit this site for checking which wireless card is compatible with your unit:
    http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/options_and_accessories_search_by_model.jsp?
    Bye

  • I currently have a D-Link DI-604 broadband router with windows computers.  How can I add wifi to the network for use with ipad?  Can I use AirPort Express?

    I currently have a D-Link DI-604 broadband router with windows computers.  How can I add wifi to the network for use with ipad?  Can I use AirPort Express?

    Yes. You can directly connect an 802.11n AirPort Express Base Station (AXn) using an Ethernet cable. The AXn would then just need to be configured as a bridge to allow the D-Link to continue to provide both NAT & DHCP services for all network clients connected to either router.
    In this configuration, the AXn would broadcast a wireless network for your wireless network clients to connect to.

  • Satellite M30-604 freezes and fan doesn't work after replacement

    Satellite SM30-604. Laptop left on carpet overnight and overheated! Fan doesn't spin and laptop only occasionally starts up. Thinking the fan was fault I replaced the fan but even this new fan doesn't spin. The heatsink is totally clean - no dust inside the vanes at all. The laptop is only 2 years old.
    Using forced-cooling (by sticking a vacuum nozzle at the cooling fan outlet!) the laptop occasionally starts up like normal right up to the Desktop screen with all usual icons and no error messages. But then it goes no further - the screen, keyboard and mouse freeze.
    Most of the time it doesn't start up at all. When it doesn't start, the blue LED comes on but there's no hard-disk activity or LCD screen at all - even the wifi LED doesn't even come on.
    Really grateful if anyone know's what's going on. Not sure if it's the main CPU that's faulty?
    Thanks in advance.
    Charlie

    Hello Charlie
    Like you know on this way it is not easy to give any precise diagnostic but according to your posting I presume that there is some complex problem and unit should be checked properly. I also think that there must be some problem with electronic.
    It is really possible that mainboard must be replaced but, as I already said, it is no possible to say anything precise about your problem. Try to contact Asp and you will see what they will say.
    Bye

  • ORA-604 when connecting to apex application

    Hello,
    We have a production server with apex 3.1 + database 10.2.0.1 64 bit + oracle http server. We wanted to move OHS to a different server.
    I have installed a standalone OHS from the oracle 10g companion CD on OEL 5 32bit and copied dads.conf from the production server.
    Now when i try to get to the application from the new server by accessing /pls/mdok application I get:
    "The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later. "
    and in the error log:
    [Thu Mar 11 18:35:53 2010] [error] [client 172.16.10.99] [ecid: 1268328951:172.17.1.20:8159:0:125,0] mod_plsql: /pls/mdok/f HTTP-503 ORA-604
    What could be wrong? Does it matter that my new http server is 32 bit and the database server is 64bit?

    ok, found answer on another forum
    The issue was the NLS_LANG setting.

  • Help replacing D-Link DI-604

    Hi everybody, I was looking into replacing my DI-604 with a newer more robust router. I only have fios Internet (no tv), and have had service for about 5 years. Can I just take the d-link out and put a new router in? Do I need to transfer any settings? How should I setup the new router (dynamic, static, pppoe). I am really just trying to cleanup some of my cable clutter... So thanks in advance!
    Solved!
    Go to Solution.

    Defiantly PPPOE. Verizon didnt stop using PPPOE until after they stopped using the 604's. They didnt go to dhcp until they were using the 624's.
    Simple. Purchase any router on the market. Connect it in place. Then follow the directions from your new router for setting up a PPPOE connection.
    When it gets to the "username" and "password" for the PPPOE connection, you can use anything you want and dont have to even remember it. Verizon uses open authentication and doesnt require a username and password. The fields just have to have something in them. I personally use username for the username and password for the password, but it really doesnt matter what you put in. so long as something is in the field.
    Your done. As far as basic connectivity is concerned. Now just need to set up your wireless (assuming you even use wireless)
    Just remember, that verizon will not support the router you connect. (no big deal but it is something to keep in mind)
    ====================================================================================
    Error exists between keyboard and chair.

  • BH-604 + PC (device installation)

    When I connect the BH-604 headphones to my PC, the PC recognizes and pair with the device. But when I try to establish a connection to the headphones, the PC establish the connection but immidiately disconnects.
    Any ideas how to solve the problem?
    My PC has Bluetooth v 2.0 and I use Windows Vista.

    hi,
    you can try to let vista search in the net, i think i had the same problem, and i just let vista search for it...

  • D-Link DI-604 and torrents

    I`ve encountered pretty wierd problem with D-Link DI-604 router.
    I have two PCs in my network, 1 slackware and 1 arch. Running azureus on slackware one gave me  no problems. But when I transfered my ~/.Azureus folder to arch computer (and of course changed router`s settings to forward azureus port to arch pc) it all started. When I run Azureus I usually get many connections. Router seems to simply block them.
    Even if I have enabled port forwarding via Advanced > Virtual Server (    192.168.0.110    Both 6827 / 6827 always) Status > Log still gives me
    Unrecognized attempt blocked from xxx.xxx.xxx.xxx:6881 to yyy.yyy.yyy.yyy UDP:6827 and so on.
    After running azureus for few minutes router slows down. I get massive lag when trying to do anything with it.

    Sorry for this thread, when I have posted it, opera started doing wierd stuff, so I thought I haven`t actually posted (even after refreshing page I couldn`t see my thread). So I had to post again.
    Mods, please remove this thread.
    And sorry again.

Maybe you are looking for

  • How to run multiple Instances of wls5.1 under one instance

    Hello forum,I want to make 3 instance of weblogic that runs under one instance,but i don't know how. for example I will like to have the following. Weblogic is my main instance,so i will like to have more instances called web,db,batch witch run on th

  • JBO-29000 error in running a JSP - Oracle JDeveloper 10.1.2.1.0 (Build 1913

    Hi, I was working on the Oracle ADF workshop with the above version of JDeveloper and Oracle 9i as database. As per the instructions in the workshop I developed a JSP, browseCustomers.jsp and Ran it. In the "Enbedded OC4J Sever" panel in the JDevelop

  • Wants to launch file thorough forms

    Hi All, I am downloading the form data using Text_IO Package into CSV file. I want to display the window with the button as 'Lanch File', so that when pressed should open the file ex. consol.csv. in the MS Excel. My OS is Win XP. Also I want to calcu

  • Nice update but as usual too many loose ends......

    A BB users since 1997 and needless to say not without peril.  The 2.0 update while generaly well designed still leaves us hanging for updates to remedy several shortcomings. Recent Desktop Manager quite buggy. Print to Go software install issues for

  • Acknowledgement for validation error.

    Hi, I have configured two trading partners Acme & Globalchips over Rosettanet Pip3A4 standard. the configuration is running fine for both Order Request and Order Confirmation. For a typical scenario when i am turning validation ON at the Globalchip s