Safari stays in "Processes" list

Sometimes when I quit Safari (either via the File menu or by clicking the "X" button, the application closes (gone in Task Manager) but stays as an active process in Task Manager. When this happens, I cannot launch Safari until I end the process manually via T.M.
Any ideas why this may be happening?
PS: Using 3.1.1 on Windows XP Pro SP 2
Message was edited by: Brian Gallagher1

I can't replicate this. After "X"ing out Safari, it disappeared from my Processes listing.
What is your home page? Try setting it to google.com, and close safari. It should work OK.
If it's not exiting the program, it may be doing some Javascript calculations and it's busy.
So, this is due either to the websites you are visiting or your PC. Let us know how testing goes.

Similar Messages

Application stays in process list of task manager for about 20 seconds after application is closed

I have an application that uses Winsock for TCP/IP connections to the server. After connecting the Winsock communications and then closing the application , the application.exe stays in the process list for about 20 seconds before going away.
If I start the application and do not connect then when I close the application it clears from the process list immediately.
Any way to track down what is preventing the process from going away when the application closes down?

I installed and ran the process monitor program and it shows where the delay is but I'm not sure what it is. Below are a few entries copied from the performance monitor log that indicates the delay between 10:10:52 and 10:11:15.
10:10:52.8375822 AM TcpRecords.exe 4124 CreateFile C:\Windows\Help\.HLP NAME NOT FOUND Desired Access: Read Attributes, Dis, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize:
n/a C:\TcpRecords\TcpRecords.exe
10:10:52.8379278 AM TcpRecords.exe 4124 RegCloseKey HKLM\SOFTWARE\Wow6432Node\Microsoft\Firewall Client 2004\Notification SUCCESS  C:\TcpRecords\TcpRecords.exe
10:11:15.3369322 AM TcpRecords.exe 4124 RegCloseKey HKLM\System\CurrentControlSet\services\WinSock2\Parameters\Protocol_Catalog9 SUCCESS  C:\TcpRecords\TcpRecords.exe
10:11:15.3369775 AM TcpRecords.exe 4124 RegCloseKey HKLM\System\CurrentControlSet\services\WinSock2\Parameters\NameSpace_Catalog5 SUCCESS  C:\TcpRecords\TcpRecords.exe
10:11:15.3375201 AM TcpRecords.exe 4124 Thread Exit  SUCCESS Thread ID: 4824, User Time: 0.0000000, Kernel Time: 0.0000000 C:\TcpRecords\TcpRecords.exe

Firefox starts hidden (window not visible), but stays in process list. IE9, Opera, Chrome works just fine

Yesterday my Firefox 4 just stopped working. When I click on firefox icon - new process appears in task manager list, but I can't see firefox windows. After killing firefox.exe process I can start another one, but still no firefox windows are shown.
Tried to re-install (with deleted profiles and whole installation from Program Files folder). Tried 3.x and 4.x versions, no luck. This is no window focus problem (or it's position outside the desktop) - firefox.exe process starts, but no GUI objects are created (checked with sysinternals procexplorer)
Computer is well anti-malware and virus protected. Reinstalled newest NVIDIA drivers (WHQL), all updates from Windows Update. I've been reading that there was some prob. with NVIDIA drivers (9800GT), but this just happened suddenly - without new updates or installed programs - just during the day...

I'm having this same problem and here is how I got to this place. First, it doesn't happen every time. About 50% of boots will Firefox not work. (The process starts, but no window opens.) I have an SSD that is smallish... 64 GB running Windows 7. It is a machine I built myself. I have about 11 Gig free at any given time. I have a 2 Tb secondary drive where I keep my data and some, less used, programs. This is also where I keep my virtual machines (VM). I currently have 2 linux machines. Last night, I tried creating a Windows 7 (W7) virtual machine with an extra copy of W7 that I have. Well, I forgot to switch the target VM install area from my system disk to the secondary disk. When I realized what I had done, the install was almost finished and I had about 1 GB left. I worked to kill everything and delete the W7 VM. (That was a time consuming pain. PC was as slow as mud, which was to be expected, I guess.) So, after I got the W7 VM deleted everything seemed to be alright, until I tried to start Firefox and it wouldn't. Thunderbird 3 also won't start. As well as Norton Antivirus. I haven't tested any other programs; however, IE will start. As will Photoshop, Wiper.exe, CCleaner and Windows Media Player. I have my machine locked down; so, I'm confident it isn't a virus or malware. (I ran a full scan yesterday and this morning - when I got Norton to start.)
I'm not thinking this is directly a Firefox issue; however, any help would be appreciated. Heh, I don't have the time or the will to rebuild the software on this machine. I do have a backup, but I've never had much luck getting those to work properly.
Thanks for any help.

Task stays in process

Hi all,
I have a wf task(submit program) that does not leave the in process state. It is a background task which sends an extenal email with attachments. It was working fine and there was a client refresh. Am I missing a basis setting perhaps?
Thanks in advance,
Scott

Bhooma,
Thanks for the response. You are correct, the settings in SWu3 were initialized however I have already had them set back.
Here's some more info...
I was running it as a back ground task, I changed it to a run from my inbox. The task runs the program first then goes to my in box. When I run it from the inbox it executes the program but the task stays in my inbox no matter how many times I execute it. Also after the email is sent I get a dialog box that comes up "SAP Connect Send Process: List of Sent Objects. This did not show up before. It comes up even if I run the program from se38.
Thanks,
Scott

Edit Safari "Frequently Visited" Black List?

Noticed that Safari had a frequently visited site under "frequently visited" but the wrong page. So I removed it hoping it would take the hint and add back the correct landing page. Now even though I visit the site about 10x more frequently than any other site, it never appears on the frequently visited list. Which makes me pretty sure that there's a black list somewhere that contains domains -- root domains -- that have been removed from the frequently visited list. I have no idea where this black list lives. Has anyone delved into Safari deeply enough to uncover the location of this list so I can adjust it?

Hello, bobbygstx.
Thank you for visiting Apple Support Communities.
Here are the steps on how to remove frequently visited sites from Safari. This process is similar to deleting favorites.
Bookmark the current page. Tap (or touch and hold ), then tap Add Bookmark.
View your bookmarks. Tap , then tap .
Get organized. To create a folder for bookmarks, tap , then tap Edit.
Add a webpage to your favorites. Open the page, tap the search field, drag down, then tap Add to Favorites.
Quickly see your favorite and frequently visited sites. Tap the Search field to see your favorites. Scroll down to see frequently visited sites.
Edit your favorites. Tap the search field, then touch and hold a page or folder. You can delete the item, or edit it to rename or move it.
Choose which favorites appear when you tap the search field. Go to Settings > Safari > Favorites.
Bookmarks bar on your Mac? Turn on Safari in Settings > iCloud if you want items from the bookmarks bar in Safari on your Mac to appear in Favorites on iPhone.
Save an icon for the current page on your Home screen. Tap , then tap Add to Home Screen. The icon appears only on the device where you create it.
Keep bookmarks
Cheers,
Jason H.

HT5772 How do I delete podcast episodes that I don't want to keep without having them stay in my List view in iTunes and clog it up? I have some episodes that I've listened to that I want to keep, but others I want to delete.

Using iTunes on my MacBookPro, I find that when I want to delete selected podcast eisodes, they still stay in my List view with the cloud symbol next to them. I don't want them in my List view. I want them gone. I don't want to download them ever again. I do keep some episodes so I don't want to do the draconian thing and delete all podcast episodes once I've heard them. The other problem I have with trying to delete episodes is that some podcasts then have the same episodes pop back up as though I haven't listened to them. I've deleted a bunch of Science Friday episodes only to have them download again ready to hear. Not only that, but some episodes will finish playing or stop playing in the middle of an episode and a random podcast will start playing. Think! does that. GAH!!
Does anyone know a workaround? The same nonsense happens in any iTunes view I try.
<Edited by Host>

You can delete photos from individual albums but not from the camera roll. If you try to delete a photo from camera roll it will be deleted from all other albums ("locations") that contain the photo. This is because the actual photo is in the camera roll (the albums only contain links to the photo in camera roll, not the actual photo).

Could not see Process List in the MMC

Hi Experts,
I have freshley installed ECC 6.0 in 3 servers, when I restart or log off windows and login windows again and try to open MMC I dont see SID in the MMC, with SAPSTARTSRV.EXE I'm able to get the SID when I click the tree i could only see the process tab but when i expand it i cannot see the process list
Same thing happened to all the server, because of this we got stuck in our work,
DEV_MS
trc file: "dev_ms", trc level: 1, release: "700"
[Thr 2408] Wed Feb 25 10:42:31 2009
[Thr 2408] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 2708) [msxxserv.c   1832]
[Thr 2408] load acl file = C:\usr\sap\E85\SYS\global\ms_acl_info.DAT
[Thr 2408] MsGetOwnIpAddr: my host addresses are :
[Thr 2408]   1 : [172.22.6.85] sapduetsp2.CHILDDOM1.ROOTDOM.EXTEST.MICROSOFT.COM (HOSTNAME)
[Thr 2408]   2 : [127.0.0.1] sapduetsp2.CHILDDOM1.ROOTDOM.EXTEST.MICROSOFT.COM (LOCALHOST)
[Thr 2408] MsHttpInit: full qualified hostname = sapduetsp2.CHILDDOM1.ROOTDOM.EXTEST.MICROSOFT.COM
[Thr 2408] HTTP logging is switch off
[Thr 2408] set HTTP state to LISTEN
[Thr 2408] MsHttpOwnDomain: own domain[1] = CHILDDOM1.ROOTDOM.EXTEST.MICROSOFT.COM
[Thr 2408] ms/icf_info_server : deleted
[Thr 2408] *** I listen to port sapmsE85 (3600) ***
[Thr 2408] *** I listen to internal port 3900 (3900) ***
[Thr 2408] *** HTTP port 8100 state LISTEN ***
[Thr 2408] CUSTOMER KEY: >G1759802310<
[Thr 2408] Wed Feb 25 10:43:45 2009
[Thr 2408] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from sapduetsp2_E85_00 [msxxserv.c   4684]
[Thr 2408] Wed Feb 25 10:54:06 2009
[Thr 2408] *** ERROR => MsSCheckConnections: no response from client C0 (172.22.6.85) after 300 secs received [msxxserv.c   3173]
[Thr 2408] *** ERROR => MsSCheckConnections: disconnect now [172.22.6.85] [msxxserv.c   3177]
DEV_W0
trc file: "dev_w0", trc level: 1, release: "700"
Wed Feb 25 14:14:21 2009
C Provider Release:9.00.1399.06
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C CheckCodepageType: line 24520. hr: 0x80040e37 Invalid object name 'DBPROPERTIES'.
C sloledb.cpp [CheckCodepageType,line 24520]: Error/Message: (err 208, sev 16), Invalid object name 'DBPROPERTIES'.
C Procname: [CheckCodepageType -- no proc]
C Cache sizes: header 68 bytes, 20000 names (31680000 bytes), 500 dynamic statements (2848000 bytes), total 34528068 bytes
C Using shared procedure name cache SAPDUETSP2_E85E85_E85_MEM initialized by another process.
C Connected to db server : [SAPDUETSP2] server_used : [np:(local)], dbname: E85, dbuser: e85
C pn_id:SAPDUETSP2_E85E85_E85
C Using MARS (on sql 9.0)
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName          ConId     ConState     TX PRM RCT TIM MAX OPT Date     Time   DBHost
B 000 000 R/3              000000000 ACTIVE       NO YES NO 000 255 255 20090225 141420 SAPDUETSP2
C Warning: Env(MSSQL_SERVER) [SAPDUETSP2] <> Prof(dbs/mss/server) [sapduetsp2]. Profile value will be used.
C The IRow interface is supported by this OLEDB provider
C sloledb.cpp [ParamStmtExec,line 13172]: Error/Message: (err 8180, sev 0), Statement(s) could not be prepared.
C Procname: [##Y4SAPDUETSe8500000032600000000001141421]
C sloledb.cpp [ParamStmtExec,line 13172]: Error/Message: (err 208, sev 16), Invalid object name 'SVERS'.
C Procname: [##Y4SAPDUETSe8500000032600000000001141421]
C ParamStmtExec failed. HR 80040e14 DBSL retcode 103. stmt: [SELECT TOP      1 VERSION FROM SVERS ]
C Conn_i:1 selection:1 singleton:1 flag_fupd:0 use_cursor:0 chksum: 1112300
C DbSlRead - Error 103 (dbcode 208) on open
C DbSlRead - <##Y4SAPDUETSe8500000032600000000001141421>
C DbSlRead - Error 103 (dbcode 208) on fetch
C DbSlRead - <##Y4SAPDUETSe8500000032600000000001141421>
C TestConnection(1): [e85] != [dbo]
C TestConnection(1) failed with dbcode 208
C redAlert activated
B ***LOG BZA=> table SVERS      does not exist on database            [dblink#5 @ 1299] [dblink 1299 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 004096) [thxxhead.c   1440]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10468]
M
M Info for wp 0
M
M    stat = WP_RUN
M    waiting_for = NO_WAITING
M    reqtype = DP_RQ_DIAWP
M    act_reqtype = NO_REQTYPE
M    rq_info = 0
M    tid = -1
M    mode = 255
M    len = -1
M    rq_id = 65535
M    rq_source =
M    last_tid = 0
M    last_mode = 0
M    semaphore = 0
M    act_cs_count = 0
M    csTrack = 0
M    csTrackRwExcl = 0
M    csTrackRwShrd = 0
M    mode_cleaned_counter = 0
M    control_flag = 0
M    int_checked_resource(RFC) = 0
M    ext_checked_resource(RFC) = 0
M    int_checked_resource(HTTP) = 0
M    ext_checked_resource(HTTP) = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M    attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION    SAP-Server sapduetsp2_E85_00 on host sapduetsp2 (wp 0)
M * ERROR       ThInit: db_connect
M *
M * TIME        Wed Feb 25 14:14:21 2009
M * RELEASE     700
M * COMPONENT   Taskhandler
M * VERSION     1
M * RC          13
M * MODULE      thxxhead.c
M * LINE        10688
M * COUNTER     1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   724]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 548) [dpnttool.c   327]
DEV_DISP
trc file: "dev_disp", trc level: 1, release: "700"
sysno      00
sid        E85
systemid   560 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    146
intno      20050900
make:      multithreaded, Unicode, optimized
pid        2876
Wed Feb 25 10:42:31 2009
kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 2876) [dpxxdisp.c   1243]
     shared lib "dw_xml.dll" version 146 successfully loaded
     shared lib "dw_xtc.dll" version 146 successfully loaded
     shared lib "dw_stl.dll" version 146 successfully loaded
     shared lib "dw_gui.dll" version 146 successfully loaded
     shared lib "dw_mdm.dll" version 146 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Wed Feb 25 10:42:33 2009
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0155.qqq.nxst) took 2 seconds
Wed Feb 25 10:42:38 2009
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5371]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >sapduetsp2_E85_00                       <
DpShMCreate: sizeof(wp_adm)          24416     (1436)
DpShMCreate: sizeof(tm_adm)          4270848     (21248)
DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm)          528064     (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm)          0     (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)          0     (72)
DpShMCreate: sizeof(vmc_adm)          0     (1544)
DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: SHM_DP_ADM_KEY          (addr: 05DA0040, size: 4936648)
DpShMCreate: allocated sys_adm at 05DA0040
DpShMCreate: allocated wp_adm at 05DA2090
DpShMCreate: allocated tm_adm_list at 05DA7FF0
DpShMCreate: allocated tm_adm at 05DA8020
DpShMCreate: allocated wp_ca_adm at 061BAB20
DpShMCreate: allocated appc_ca_adm at 061C08E0
DpShMCreate: allocated comm_adm at 061C2820
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 062436E0
DpShMCreate: allocated gw_adm at 06243720
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 06243750
DpShMCreate: allocated wall_adm at 06243758
MBUF state OFF
DpCommInitTable: init table for 500 entries
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 1499 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1633]
***LOG Q0K=> DpMsAttach, mscon ( sapduetsp2) [dpxxdisp.c   11822]
DpStartStopMsg: send start message (myname is >sapduetsp2_E85_00                       <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Wed Feb 25 10:42:39 2009
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
DpMsgAdmin: Set patchno for this platform to 146
Release check o.K.
Wed Feb 25 10:43:18 2009
ERROR => DpHdlDeadWp: W0 (pid 2696) died [dpxxdisp.c   14532]
ERROR => DpHdlDeadWp: W1 (pid 2012) died [dpxxdisp.c   14532]
ERROR => DpHdlDeadWp: W2 (pid 3252) died [dpxxdisp.c   14532]
ERROR => DpHdlDeadWp: W3 (pid 2584) died [dpxxdisp.c   14532]
ERROR => DpHdlDeadWp: W4 (pid 2280) died [dpxxdisp.c   14532]
ERROR => DpHdlDeadWp: W5 (pid 2676) died [dpxxdisp.c   14532]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => DpHdlDeadWp: W6 (pid 2920) died [dpxxdisp.c   14532]
ERROR => DpHdlDeadWp: W7 (pid 2852) died [dpxxdisp.c   14532]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => DpHdlDeadWp: W8 (pid 972) died [dpxxdisp.c   14532]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => DpHdlDeadWp: W9 (pid 3312) died [dpxxdisp.c   14532]
ERROR => DpHdlDeadWp: W10 (pid 3464) died [dpxxdisp.c   14532]
ERROR => DpHdlDeadWp: W11 (pid 2948) died [dpxxdisp.c   14532]
ERROR => DpHdlDeadWp: W12 (pid 1336) died [dpxxdisp.c   14532]
ERROR => DpHdlDeadWp: W13 (pid 3636) died [dpxxdisp.c   14532]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => DpHdlDeadWp: W14 (pid 836) died [dpxxdisp.c   14532]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => DpHdlDeadWp: W15 (pid 3660) died [dpxxdisp.c   14532]
ERROR => DpHdlDeadWp: W16 (pid 424) died [dpxxdisp.c   14532]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1605
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Feb 25 10:43:28 2009
NiISelect: TIMEOUT occured (10000ms)
dump system status
Please let me know if you need any further information
Thanks In Advance
Murtuza

Hi,
I have checked the Database it is up and running and i have logged into sidadm user and tried but same error
Please could anyone help me as im not able to sort out this issue and everything got stuck
Thanks
Murtuza

BPM Process List Viewer -"No Authorization to see view of the Page"

Hi,
While I am trying to see preview of the Process List viewer Page at content provided by sap -> end user content -> bpm -> pages and at tcbpemwdui~proclist-> ProcessListViewer getting "No authorization to see the preview of the page".
Given permissions to portal content to everyone group with end user and user been assigned BPEM end user role & EU_role and Everyone group.
I hightly appreciate your help to resolve the issue. I am in crusial situation to fix this issue.
Thanks in advance..
Ian

You can use an extension to set a default font size and page zoom on web pages.
*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/

Post Processing List

Hello all,
I have a question related to the Post Processing List (transaction MF47), where they appear the backlogs resulted from backflush.
If, by mistake, I deleted some postrocessing records (instead of processing them), how could I see later these deleted records? And how could I process them later on, if they need to be processed? --> do it exists an "undo", related to the action of deleting postprocessing records?
Thank you very much,
Edith

Dear Catalin Ignat,
Once if the Post Processing Record is deleted in MF47,
in no way you can fetch the data back.
It will not show either in AFFW or AUFM or COGI.
SAP has given a temporary means to use this Reprocessing allowed in REM
Profile.
So once deleted unknowingly its lost.
Reward points and close the thread.
Regards
Mangal

Error in formula processing - List price has null value

I have created a freight/special charge modifier where the qualifier in it is if terms = credit card, then execute. The formula in this modifier is List Price * Numeric Constant. However when I test this I get a Note: Error in formula processing - List price has null value. The List price is NOT null. I'm not sure why I'm getting this error...

Hi,
Thanks for the update.
Actually, my problem got resolved. After analyzing the debug file myself, I narrowed down the error as below
Normal flow Formula Processing begin
In ---Routine:QP_PREQ_GRP.Formula_Processing---
PRICING_PHASE_ID: 2
Processing Formula ID :7512
Line Index: 1
Start Formula...
Formula Line Type = ML, Step = 1
Before populating formula stepvalues temp table
Other Exception ORA-01403: no data found
Exception occurred. Formula value returned is
Formula return status: U
Formula Base Price :
Error returned by QP_FORMULA_PRICE_CALC_PVT.Calculate
And, as per the oracle support note "Error Returned By Qp_formula_price_calc_pvt.Calculate [ID 1282519.1]", after setting the profile value to N, the issue is resolved.
With Regards,
Vishal Majithia

Search for a filled Business Process List (Formaly known as BPML)

I need a Business Process List (Formaly known as BPML) for a project. In ASAP7.1 the template BusinessProcessList_Template.xls is empty.The sample BusinessProcessList_Sample.xls is not covering my need for the complete ERP BPL.
How to find/get a filled BPL??
Kind Regards,
Aart

Hi,
Check the following links
[BPML|http://help.sap.com/printdocu/core/print46c/en/data/pdf/SVASABPML/SVASABPML-STRUKTUR.pdf]
Here's a sample BPML
[Sample|web.eng.fiu.edu/ronald/ERP/bpml_master_list.xls]
Regards,
Amit

After exiting Firefox it remains in "process" list, preventing a relaunch

Running WIN 7 64 Bit Home
Firefox 3.6.8
After I exit Firefox, and go on to do other work, when I want to re-start Firefox, I get a message saying Firefox is running, but not responding, and I need to stop it first before restarting.
In Task Manager, Firefox does not appear in the Applications list. It does appear in the Processes list. Of course when I select it and click "end process" I get the usual warning of unexpected outcomes, but I do it anyway. This does not result in any problems. But I think this should not be happening.
Any advice or feedback appreciated.

Hi,
I hope [https://support.mozilla.com/en-US/kb/Firefox+exe+is+always+running this article] would solve this problem.
Kind regards,
Joren

Why do sites in Safari 6's reading list say "waiting"

I'm running Lion (10.7.4). Ever since I upgraded to Safari 6, the sites listed in Reading List show a "Waiting..." attribute. This never goes away.
Any solutions?

Try enabling the Develop menu so you can empty the cache.
From your Safari menu bar click Safari > Preferences > Advanced
Select: Show Develop menu in menu bar
Now from the menu bar click Develop > Empty Caches
Quit then relaunch Safari to test.
If that doesn't help, open the Finder. From the Finder menu bar click Go > Go to Folder
Type this exactly as you see it here:
~/Library/Caches/com.apple.Safari/Cache.db
Click Go
Move the Cache.db file from the com.apple.Safari folder to the Trash.
Quit and relaunch Safari to test.

Process list failed

Hellow everyone,
while opening SAPMMC i got message like "Get process List Failed" Unknown error.
How can solve this problem
Regards
Ganesh

That is a well known bug with SAP MMC. Next time you open SAP MMC, and you go to close it, make sure your last action was not looking at the Process List - open the syslog or whatever but get out of that Process List BEFORE you close the SAP MMC session.
Next time you open the SAP MMC, you won't get that message.

Why are there 4 (!) FlexBuilder.exe in my TaskManager Process list?

Much to my surprise I found 4 (!) different FlexBuilder.exe processes in my TaskManager process list (WinXP+SP3).
How comes?
I have currently opened only 1.
Moreover 3 of them consume between 19 and 30% of the total CPU power!
Is this a bug?
If I close the current FlexBuilder one of the 4 vanishes but 3 remain active
Why are dead Flexbuilder.exe not removed? Do I have to set an explicite option for that?
I expected even when I start a new instance of FlexBuilder this instance should check wether there is already a running instance
and warn me or use this.
Is there a preference "allow only 1 instance of FlexBuilder" ?
Peter

Flex Builder is based on Eclipse and there is no parameters so start only a sigle version - you can use several products based on Eclipce simultaneously or use several instanceses of one product.
If you see several intances in Task Manager, some instances can't stop working and you can kill them in task manager. After that you can see FB logs for errors. You can also check number of javaw.exe processes.

Safari stays in "Processes" list

Similar Messages

Maybe you are looking for