Safety Stock Problem

HI All,
I have one scenario for MRP in MTS Scenario.
E.g.
Available Quantity= 50
Reorder Point = 60
Safety Stock = 20
Now the available stock (50-20=30) Stock is less than the reorder level stock after removing the Safety stock.PR is generated and it is converted into PO, PO sent to the vendor. But vendor will take time to send the goods to our plant.
In the same case we have safety stock in stock, I want to use the safety stock available in the system to sell it to the customers because of the urgency. How can i use the safety stock to sell to the customers?  What is the Procedure to do it? Please explain me with step by step.
Sure, points will be awarded.

in the availability check, in OVZ9...for tyhe combination of ava check and group set include safety stock check box active.
then it will allow you to get the qty in ava check in sd order and you can sell it.

Similar Messages

  • Report for Reorder point, safety stock, current stock and fixed lot size

    Hi,
    Purchasing Dept. is looking for a report which can give list of materials falling below the reorder point, so that they can go ahead and create procurement proposals for those materials.
    They also want to see the Reorder Point, Safety Stock, current stock and fixed lot size in the same report.
    Let me know if there ia any standard report availbale which displays the same or any approach to get the same.
    Thanks in Advance.
    Regards,
    Shankar Goud.

    Hi,
    There is no standard report because this is meant to be managed by the MRP run.
    The MRP lists show all materials that have a problem (such as stock below reorderpoint) but MRP generates requirements for these anyway and so all you need to do is to look for the MRP generated requirements (requisitions?) and you have your list?
    Are you using MRP?
    If so then please use the standard functions in MRP to get this.
    If not, then WHY NOT?
    Steve B

  • Dynamic update of safety stock in SAP R/3 systems (ECC 5.0 version)

    Hi Friends,
    Forgive my newness to SAP. Let me explain the problem i am facing in SAP. I want to identify the parameters to dynamically update the finished goods safety stock for each depot by SKU wise.
    Current process :- Safety stock is calculated manually and updated by using Transaction code MS02 in the system.
    It would be highly useful if i know the flow in SAP system and how the current process can be changed?
    If more info is required i'm ready to give.
    Thanks in advance

    Hi Mario Adler,
    Thanks a ton for ur answer.
    Will it update safety stock for finished goods in each depot by SKU wise? Raw material safety stock isn't my concern.
    project description :  Manufacturer of chemical goods , 70+ products,350 skus
    Distribution : factory to depot (bulk volume)
                          Mother go-down to depot(Stock transfer)
                         No of depots :33,factory:3,mother go-down -1
    Sales forecasting is done in excel for every month and updated to SAP via  BAPI. After that DRP,MRP and other runs takes place.
    What are all the areas i need to touch in to get the parameters to update the safety stock?
    Regards
    Arasu
    Edited by: Arasu_IIM on Apr 26, 2011 12:52 PM

  • Safety Stock Issue

    Hello Gurus,
    We are in SCM 4.0 and currently we are facing an issue in safety stock calculation.
    We run a macro to calculate the safety stock. The safety stock for a particular bucket is calculated by the sum of total demand of next consecutive 4 buckets. The problem is that the macro works fine if we select a single product-location combination but when we select a product at multiple locations combination (aggregated level) the macro doesnt work. The value is not displayed in the planning book. However, we could see the total demand value for that particular bucket.
    Hope I am clear and please help me on this.
    Thanks,
    Sai

    Hello all,
    I have a quick question:
    Do we need to maintain the data at Location-Product Group level to go for Aggregated Safety Stock Planning?
    Let me explain my case:
    We have the following selections at Location-Product level:
    Sel1: Prod1 at Loc1
    Sel2: Prod1 at Loc2
    Sel3: Prod1 at Loc3
    When I make either of these selections individully in the Planning book the safety stock macro works fine but if I make any of these two selections or all the three selections at a time, then the values does not show up at the Total but I can see the values at 'Details' level if I select Location at the Header Information.
    We are thinking of Aggregated Safety Stock Planning and We do not mainatain the data at Group level. Can we still go for Aggregated Safety Stock Planning?
    Could anyone give me some suggestions on this?
    Thanks
    Sai

  • Safety Stock (ABAP Report)

    Hello to All,
    We have a problem regarding Safety Stock report (ABAP Report).  The program is designed to generate material's Plant/Sloc and Unrestricted Stock versus Safety Stock.  The report was working properly in DEV, QAS and PROD server.  Then another feature was requested to be added, the report should also eliminate or not display all materials that was marked as Flag for Deletion.  When the transport request for this enhancement was transported and tested in DEV and QAS server, the report is running properly.  But when transported in PROD server, the report only generates two material codes and doesn't list the other materials.
    Regards,
    Ann

    Hello,
    Thank you for the reply, I have checked the Safety Stock in the material and also the flag for deletion indicator... We have analyzed that the program needs to be reviewed on the part of "Flag for Deletion" indicator when eliminating records in the report list.
    Thank You again.
    Edited by: Meryll Penalosa on Dec 7, 2010 8:05 AM

  • Delivery Against safety stock

    Hi All experts,
    In my REM buisness scenarion, I want to deliver the quantity from safety stock for sales order. I did setting for MRP group :- Share saety stock 100% and assigned this MRP group to finish product. But delivery takes place but picking quantity is not coming as per the sales order quantity. Thats why delivery is not taking place for sales order quantity.
    How to solve this issue? is there any setting in MM or SD side?
    Thanks in advance,
    Milind

    Hi,
    Please refer the below link,
    [link|Goods Issue Problem - Mvt Type 645;
    [link2|Error in post good issue??????;
    Hope sole your issue.
    Regards,
    R.brahmankar

  • Maintain plant specific safety stock

    How to maintain plant specific safety stock for the same material.

    Hi swetha
    First Go to T : code : MM02 : change Material
    Enter plant number for which u want to enter Safety stock
    Goto MRP-2
    Net Requirement calculation
    enter safety stock
    Use of safety stock :
    Safety stock
    Specifies the quantity whose purpose is to satisfy unexpectedly high demand in the coverage period.
    The risk of shortfalls is reduced by having a safety stock.
    Procedure:
    With manual reorder point planning, you can enter a value in the material master record. However, it is merely for information.
    With automatic reorder point planning and forecast-based planning, the system determines and adjusts the value automatically for forecasting purposes.
    Hope ths solve ur problem
    please reward points
    Regards
    Sunil

  • Stock Problem in PRoduction order  confirmation

    Dear All,'
    We are facing a strang problem at the time of confirming Prod. order(Co15). We are confirming order in back date. But even if stock is available on that date(Prd. ord confirmation date) as well as current date system is showing defict of stock.
    We have crossed check stock in mb5b,mmbe,mb51 but unable to come on any conclusion.
    Please help.
    Also tell me from where to view and remove safety stock qty.
    rgds
    Awnindra Dutt Tiwary

    Hi,
    You can see the safety stock in the MRP 2 view of the Material Master.
    If the stocks available, make sure it is not the safety stock.
    Hope that helps.
    Regards,
    Rohit.

  • Suppression of Re-Order Point Safety Stock Exception Messages

    Hi There!
    Hope someone can help!?
    I need to be able to suppress MRP Exception Message 96 - Qty Under Safety Stock but for PD Only.
    Is this possible?
    Cheers,
    Karl

    Hi There!
    We have lots of Raw materials controlled by MRP Type PD, which have Safety Stock Value.
    However, quite often although the actual stock is lower than the Safety stock Planners have lots of messages (96 - Below safety stocks). However, although Purchase order reciepts may be late, there isn't actually a problem. As When the PO Reciepts actually happen there is enough stock to satisfy actual demand.
    We would like to put many of these Raw materials on Re-Order Point Planning, and manage. But we would like to ignore the (96 - Below Safety Stock) for Normal Items.
    Hence, Planners have exception messages for REAL Priorities.
    Hope this explains all!
    Cheers,
    Karl

  • Dynamic Safety Stock wih Safety daysu2019 supply

    Hi
    In APO PP/DS, my compagny want to set up for several products,  two safety stock :
    1- Dynamic Safety Stock in order to prevent when actual usage exceeds forecasted demand
    2 - Safety day's to prevent when time it takes to receive a replenishement shipment exceeds the projected lead time (usual problem in our business)
    For this two cases we use
    1- MB
    2 -SZ
    So my question, how it's possible to mix this 2 safety stock methods? Is possible to create a custom method or custom heuristic in order to do that?
    Thanks for your help
    Youri

    Hi
    We have ever try without success other solutions as :
    SM and MM
    MB with Good Receipt Time in APO = ( Good Receipt in R/3 + Safety Days )
    The only solution seem AT/BT method but we can't make difference between safety stock and safety days during monitoring
    Thanks for your help

  • Safety Stock Not Being Released To Cover New Sales Orders Or Forecast

    Hi,
    Does anyone know of a way to get safety stock at the lower levels of the BOM to get released for upper level sales order or forecast demand without having to adjust the effectively out to a future date?
    Example:
    A = Finish goods item with two weeks lead time
    B= component of A and it has two weeks lead time
    C= component of B and has 10 weeks lead time.
    Have safety stock hard coded with an effective date of today for 100,000 units.
    I have 100,000 in inventory and I have planned orders to cover all my demands and future safety stock requirements for the next ten weeks.
    I receive a new sales order for 50,000 units with a customer request date five weeks out.
    I am getting ATP dates to assign to the new sales order 14 weeks out versus allowing me to use 50,000 units from the safety stock to schedule in week five?
    Even If I schedule the sales order for five weeks, because I have gone down two levels to confirm that I have safety stock, and It could be used, planned orders would not get generated at the next two levels, because the demand date on the safety stock is earlier than the demand date for the new order?
    Is there any resolution that anyone has found that addresses this issue?
    We have set a demand priority rule on the ASCP plan options tab to "Sales Order Priority" where we have set criteria for number one to "Sales Orders & MDS Entries Priority" and number two to "Schedule Date".
    We have found that adjusting the supply and demand dates out to cover the full 14 week period does reduce the safety stock at the lower levels, but it also creates additional starts and inventory to be put into the line, which makes this approach not feasible.
    Does anyone have any solutions to this problem? We do not build safety stock for the sake of building safety stock. We want it to be used for any sales order or forecast demand that comes within the planning horizon.
    Appreciate any inputs.
    Regards,
    Dave

    Hi Dave,
    Try this note suggestion, possibly help you in resolving your issue.
    How to Avoid Getting Safety Stock Replenishment Too Early in an ASCP Plan [ID 301629.1]
    In order to line up the safety stock supply with the changes in safety stock, a combination of the profiles must be used:
    MSC: Use FIFO Pegging as yes
    and the plan option
    Peg Supplies by Demand Priority is checked.
    The profile MSC: Use FIFO Pegging as yes will perform the following:
    For all demands and supplies, it proceeds item by item and
    pegs supplies to demands on a daily basis. Daily supplies
    and demands are not sorted. When supplies or demands
    on a given date are used up, it picks from supplies or
    demands on the next date. The unpegged supplies are
    pegged to excess.
    The peg supplies by demand priority combined with the profile above will prevent the system to plan ahead for safety stock.
    Also no safety stock smoothing is setup.
    To implement the solution, please execute the following steps:
    1. Please set the profile:
    MSC: Use FIFO Pegging as yes and
    2. Under the plan settings in the main tab the set the following options:
    Enable Pegging ON
    Peg Supplies by Demand Priority ON
    Warm Regards
    Sivaraman.G

  • Whether it is possible to make auto goods issue below safety stock level

    Hi SAP Gurus,
    I am implementing MRP for generating stock transfer Planned orders from a Main Mother Plant to different Plants. We have defined a Safety stock level for materials at main Plant level.
    There is a auto program available for generating auto goods issue against Purchase orders.
    System picks up Qty as long as unrestricted stock exists for the material during auto goods issue.
    System dont pick up any Qty below safety stock level (manual goods issue works below safety stock level).
    We are defining safety stock to meet sudden requirements and have time for new procurement.
    But it should allow us to do auto goods issue below safety stock level.
    Whether this is possible and what need to be done ?
    Thanks and Regards,
    R.Velmurugan.

    Hi Velmurugan,
    I don't think auto GR is a problem from safety stock. Auto Gr can be done by two ways.
    1. Control key and assigning the control key in operation(Preferably in last operation)
    2. In production scheduling profile you can do it. You have to assign the production scheduling profile in material master work scheduling view.
    Regards,
    Krishnendu.

  • Safety stock data update in APO product master

    Hi Gurus
    I have an active IM for a product . when i change the safety stock in R/3  , the same is not getting updated in APO. The method maintianed is SB
    Please suggest

    Finally i need to apply the below code in Exit EXIT_SAPLCMAT_001
    INCLUDE ZXCIFU01 *
    IF CT_CIF_MATLOC IS REQUESTED.
    if no saftystock-method is explicitly set
    use method 'SM' if safty stock & time is transfered
    use method 'SB' if only safty stock is transfered
    use method 'SZ' if only safty time is transfered
    LOOP AT CT_CIF_MATLOC.
    LOOP AT CT_CIF_MATLOCX WHERE MATNR = CT_CIF_MATLOC-MATNR AND
    LOCNO = CT_CIF_MATLOC-LOCNO.
    CT_CIF_MATLOCX-MSDPSBMETH = 'X'.
    *APO und R/3: Safety stock
    IF CT_CIF_MATLOCX-SAFTY = 'X' AND
    NOT CT_CIF_MATLOC-SAFTY IS INITIAL.
    *APO: Safety days' supply R/3: Safety time/act.cov.
    IF CT_CIF_MATLOCX-SVTTY = 'X' AND
    NOT CT_CIF_MATLOC-SVTTY IS INITIAL.
    *Maximum of stock und safety time
    CT_CIF_MATLOC-MSDPSBMETH = 'SM'."Maximum
    ELSE.
    *Safety Stock
    CT_CIF_MATLOC-MSDPSBMETH = 'SB'.
    ENDIF.
    ELSE.
    IF CT_CIF_MATLOCX-SVTTY = 'X' AND
    NOT CT_CIF_MATLOC-SVTTY IS INITIAL.
    *Safety days' supply
    CT_CIF_MATLOC-MSDPSBMETH = 'SZ'.
    ENDIF.
    ENDIF.
    MODIFY CT_CIF_MATLOC.
    MODIFY CT_CIF_MATLOCX.
    ENDLOOP.
    ENDLOOP.
    ENDIF.
    Thanks all for the input

  • Report on current stock and safety stock

    Hi,
    I want to have the report on current stock and safety stock.
    In MC.9 it gives wrong safety stock. When I go to cross check the safety stock in material master & in MC.9 I see differences.
    Thanks,
    Kiran

    You can user tcode MC.9 or MC.5 to know valuated stock available at given plant. Stock lying in Returns (MB52) will not be a part of this report as it non-valuated stock.
    The stock in the accounting view of the material master considers stock at plant level including stock in Transit (Intra & Inter plant stock trasnfers) & special stock like stock issued to vendor , consigment stock etc which is valuated at plant level.
    whereas and stock in the plant stock view of the material master does not consider such special stocks hence there will always difference in both veiws.
    For Physical stock as on particular date you can consider MB5B report with radio button "Storage location/Batch Stock" wherein you will get Quantity issued & Qunatity received in those SLOC along with Opening stock & Closing stock for the specified period.
    use tcode
    MBLB to know stock at vendor.
    MB54 - Consignment Stock.

  • Safety stock not covered by schedule lines in planning run

    Hi !
    In our organization we are trying to implement scheduling agreements and automatic creation of delivery schedule lines through MRP. We have MRP type PD and it considers the reservations created by PM orders and Production orders as requirement elements. When I do the planning run, it creates schedule lines for the PM order reservations and purchase requisition for safety stock. I need it to create schedule lines for all scenarios. Kindly help and suggest a solution.
    Regards,
    Satya

    Hi,
    Please refer the below links.
    Schedule Lines not getting created in MRP
    Re: No Scheduling line is generated when RUN MRP
    Hope it helps you.
    Thanks.

Maybe you are looking for