Sales Order display in CNMM

Hi ,
In our scenario we are assigning multiple sales orders to project at WBS levels ranging from 1-2.
In CNMM we are getting the display of only one sales order which is assigned at Header WBS.
Other sales orders ( which are assigned to level 2 ) can be seen in Left side tree structure but while selection we are not getting the details at right side it doesn't show any row for sales order.Eventhough I used same sales document type for all sales order.
Wht can be the reason ?
Pl suggest.
Rgds
Edited by: Shrikrishna Rasam on Aug 26, 2008 8:58 AM
Edited by: Shrikrishna Rasam on Aug 26, 2008 2:36 PM

Hi,
Thanks or the reply.
The Inspection lots are of lot Origin 04, and the Process order for which these lots are created is having a link to Sales orders.
Hence the requirment is to see the Sales order also against which these Process orders are created and for these process orders the Inspection lots are created.
I know that the sales order option in the dynamic selection is to show sales order against which the insp lots are created.
Is there any user exit for the QA32 or QA33 Tcode which solves my requirement.
Thanks
Navin

Similar Messages

Sales order display-how to change color of item with high level 0

Please does anyone know how can i chenge the color of item with high level 0 in display of sales order in red or yellow so it can be seen better for better searching on page?
thank you in advance...
regards..

You'd probably have to do a modification in SD for that. But what you can do, is make the higher level item not changeable. You could also set the display range to UHAU to only see the main items, do this in transaction VOV8. Or you could change your item category in VOV7 only to show main items.
good luck

Procurement tab in Sales order displays two line items per material

Folks
I am not a SD guy and i have a very basic question on how to read the details in the procurement tab for a sals order.
In the Procurement tab of a Sales order, two line items per material are displayed as shown below. whats does this mean ?
Further, I had observed the below differences in the below 2 lines
1. Mat. Avail Date is 06/19/2007 for line 1 & 06/20/2007 in line 2.why r the dates different ?whats the significance?
2. Confirmed qty is 0 line 1 & 1in line 2.( when does confirmation trigger or update ? Is it upon ATP check or upon delivery ?)
3. Order qty is 1 line 1 & 0 in line 2.
Item     Material     Plant     Confirmed Qty     SU     Mat. Avial Date     SL     Req. Type          Deliv. Date     ATP Qty     Loading dt     Route     Part. Deliv/ Item     Deliv priority     Desc
10     NTE801NC     2400     0     EA     6/15/2007     CT          D     6/19/2007     0     6/15/2007     24GB03     C     98     Priority 98 (Normal)
                                1     EA     6/15/2007     CT          D     6/20/2007                   6/15/2007                    Priority 98 (Normal)
Thanks

It means 2 schedule line for that materials ,
06/19/2007 is the date on which material is requested by customer but there is not sufficient stock on that day so 0 quantity is confirmed for that day.
On 06/20/2007 material is availabe and you can start delivery to customer on 06/20/2007 and system confirms the material for 20th and it is reserved for this sales order.
Confirmation is based on your MAT ( Material availability date ), but you can revist these dates through by triggering availabilty check or Back order processing through GATP or ATP.
Manish

BOP Monitor missing Sales Orders, Displays only STOs

Hi,
We have an issue with a back order processing monitor screen. BOP Monitor displays both SO and STO immediately after the BOP run but wipes out the SO from display after few hours. I guess the SOs have been deleted from buffer and so we don't see them on monitor screen.
We have no functional issues as SO have been processed and confirmed but only the monitor screen misses SO. How does the buffer removes only SO? Do we have any programs to change the buffer? Much appreciate your clues here.
Thanks

Hi Asokan,
BOP Monitor is a dymanic display unlike SM37 background jobs log. So, if you see the Monitor immediately after BOP run, it would show you the results of BOP. However, if you see after some hours, the display will show you dynamic situation of your BOP result elements i.e. situation of schedule lines at that moment.
If you have any program in R3 that updates sales orders, then there is possibility that the sales order schedule lines are updated and no longer available for display.
Please check whether you get any messages in BOP Monitor. Also, for reference to BOP runs, please refer BOP_RESULT instead of Monitor. This report is static and will show you situation before BOP and after BOP.
Regards,
Bipin

Sales order display - ship-to-party

hi
when VA03 transaction is run after providing the order value it displays header and item details. but in ship-to-party filed from which table the data is coming exactly how to find. and tell me the table name.
I know the process. pressing F1, in the technical information it is displaying the structure name. after that we need to double click on data element and we have to use the where used list and there select table fields. it is displaying so many. but i couldn't able to find the exact table. is there any way to do this.

Hi
Ship-to-party is a partner function so you will find it in table VBPA. The Key for this table is VBELN-POSNR-PARVW where PARVW is the partner function. For ship-to-party (on our system anyway) the value you require is 'SH'.
Hope this helps
Andy
There is also VAKPA which kind of does the reverse of VBPA in that it it is an index of sales orders for a given partner function. The one you need will depend on your specific requireements.
Message was edited by: Andrew Wright

Push button not active in sales order Display trasaction

Hello,
I added a push button to sales order item -> additional data B tab. The push button is INACTIVE when i see via VA03 transaction where as ACTIVE if i see via VA02 transaction.
My requirement is that i have to make it active VA03 Transactions also.
How can i do that?. Please help me in this regard.
Thank You,
Naresh.

Hello,
I could able to solve the problem
Thanks to you both.
I was using the Modification Group 1 parameter in the push button attributes and trying to activate via PBO already - as is mentioned by Karthik.
But I used screen-ACTIVE = 1 alone. Now as per pawan's message i have used SCREEN-INPUT = 1. and it worked out.
Thank You once again...
Regards,
Naresh

PR from Sales Order - Display the Number in PS?

Hi Experts --
I made a sales order for a material then I check the stock requirment from MD04 and from MMBE I decide to plan for procurment .
I run the MRP then make a Pland Order f and assigning this Planed Oredr to a WBS with account assignment Cat. Q.
Then I am converting Planed Order to Thir Party Requistion .. from MD14 .when i save this I found a PR number
is there any way by which I can see the PR number in PS Module (to which I have convert in PR from Planed Order)
How can I see this material in Project Planning Board....
Please Clear the Concept .......
how can i see the PR in sales order too
thanks in advance
Regards
SMITH

Hi,
Select the particular material component in CJ20N, on the purchasing data tab one can see the PR number exactly at the top of the left hand corner.
hope its useful.
Thanks..

Want to Display Sales Orders

I want to create a Web Dynpro that will display Sales Order Information. Not sure what I want to use as my selection criteria yet. Perhaps Partners, or Customer Numbers. Does anyone have any suggestions? Like, some good Class Methods I can use in a Service Call for accomplishing this.
Thank-You.

Try these FM's
SPP02_SALESORDER_GET           gets salesorder header and items.
BAPI_SALESORDER_GETLISTBOS     Sales Order with BOS: List of all Orders for Cus
SALESORDER_GET_SERIAL_NUMBERS Get serial numbers of a given sales order
BS01_SALESORDER_GETDETAIL      Sales Order: Display Order Data of Order
BS01_SALESORDER_GETLIST        Sales Order: List of all Orders for Customer
ISIDE_RLOEPM_SALES_ORDERS_READ Get sales orders for given accounts
Hope it works.

Displaying sales order from other system

Hi Experts,
I have a requirement of displaying sales order from other system. I will be fetching sales orders through a RFC call and displaying it in an ALV. on clicking of the sales order displayed from the ALV, I need to display it from the other system.
How can I go about this?
Please help.
Regards,
Rohan

rohan,
you already have answered most part of your question.
- displaying SO from other system through RFC:
create a remote enabled function in that target system. call this FM from your current system. (for RFC calls check this: [RFC help|http://help.sap.com/saphelp_nw04/helpdata/en/22/0425f2488911d189490000e829fbbd/content.htm]
displaying SO by double clicking in ALV:
--ALV's comes with a event USER_COMMAND. in this event you can pass your subroutine and in your subroutine you can do your coding... take help from sdn searches like :About FM ALV user_command Event
hope these helps
Somu

Quantity is not getting conformed in sales order

HI SD Gurus,
i have one issue we are not able to solve i need your help, it is very urgent,
My issue:we created sales order but quantity was not getting conformed is sales order even though we have enough stock
but it was consumed the stock in MD04,
we ran the SDRQCR21 program but issue is still exist,
1. we checked all the ATP configuration every thing is fine,
2.we replicated the scenario in quality it is working fine
3.we try simulated in production but not conformed the stock
4. total stock is in unrestricted only
5. no block in sales order
6. same material working fine with different plant
7. in same plant different materials working fine
available stock level in MMBE and MD04 is 330 qty unrestricted
sales order created for 165
then stock reduced in MD04 to 165,and sales order displayed in MD04 with quantity 165
but it was not conforming the schedules in sales order(with any dates)
I am requesting you to reply ASAP if any one faced the same scenario
BR,
CS

Hi CS,
Please check the stock availability in CO09. If CO09 shows available quantity as zero then the sales order quantity cannot be confirmed.
Please review SAP Note Number 89362 - No confirmation despite available quantity/stock for further information on this transaction.
You will also find further information in this document:
http://scn.sap.com/docs/DOC-58040
I hope this helps.
Kind regards,
Catherine

FM to get sales order details with billing document .

hi ,
is there any standard FM or BAPI to get the sales order details with input as billing document ?
i have the billing document number now i need to get the sales order number and its details ..
is that possible ..
i very well know how to get it by using query, i need standard FM.
Points will be awarded for sure , if it helps .
Thanks and regards
JK

Here is the list of BAPIs
BAPI_QUOTATION_GETDETAILBOS
BAPI_INQUIRY_GETDETAILBOS
BAPI_SALESORDER_GETDETAILBOS
SALES ORDER->
BAPISDORDER_GETDETAILEDLIST Sales Order: List of All Order Data
BAPI_ORDER_CHANGE_STATUS_GET Change status for order
BAPI_SALESDOCU_CREATEFROMDATA Creating a Sales Document
BAPI_SALESORDER_CHANGE Sales Order: Change Sales Order
BAPI_SALESORDER_CREATEFROMDAT1 Sales Order: Create Sales Order
BAPI_SALESORDER_CREATEFROMDAT2 Sales Order: Create Sales Order
BAPI_SALESORDER_CREATEFROMDATA Create sales order, no more maintenance
BAPI_SALESORDER_GETLIST Sales order: List of all orders for customer
BAPI_SALESORDER_GETSTATUS Sales order: Display status
BAPI_SALESORDER_SIMULATE Sales Order: Simulate Sales Order

Function Module for open Purchase Order & Sales Order?

Hi, commonly I read the data from tables and calculate the open quantity for sales order and purchase order, but I want to know, are there any standard function modules for getting the list of open "purchase order" and "sales order" respectively?
Thanks and Regards.

hi Ren,
u can check all these bapi's related to salesorder
BAPI_SALESORDER_CHANGE Sales order: Change Sales Order
BAPI_SALESORDER_CONFIRMDELVRY Sales Order: Confirmation of Delivery; Document Flow Update
BAPI_SALESORDER_CREATEFROMDAT1 Sales order: Create Sales Order
BAPI_SALESORDER_CREATEFROMDAT2 Sales order: Create Sales Order
BAPI_SALESORDER_CREATEFROMDATA Create Sales Order, No More Maintenance
BAPI_SALESORDER_GETLIST Sales order: List of all Orders for Customer
BAPI_SALESORDER_GETSTATUS Sales Order: Display Status
BAPI_SALESORDER_SIMULATE Sales Order: Simulate Sales Order
May be this FM can help you
MB_ADD_PURCHASE_ORDER_QUANTITY (Reading and adding open purchase order quantities)
Regards,
Naveen

Abnormal sales order for FOC sales

Hi Expert,
I am encountering a weird situation as listed below.
SO created with -ve figure which is the -ve figure is reflected from my ZREB consition typre. Logically should be zero value regardless of +ve or -ve condition type.
however the +ve value(ZDEF- deferred revenue) it does not show on net value.
1) We have customize document type ZFOC
Sales Document Type   ZFOC Free of Cost
SD document categ.    C                             Sales document block
Indicator
No.range int.assgt. 01                            Item no.increment    10
No. range ext. assg. 02                            Sub-item increment   10
Reference mandatory                                Material entry type
Check division
Probability          100
Check credit limit                                 Check purch.order no
Credit group
Output application   V1                            Commitment date
Screen sequence grp. AU    Sales Order             Display Range        UALL
Incompl.proced.      11    Standard Order          FCode for overv.scr. UER1
Transaction group    0     Sales order             Quotation messages
Doc. pric. procedure C                             Outline agrmt mess.
Status profile       ZSD_REL                       Message: Mast.contr.
Alt.sales doc. type1                               ProdAttr.messages    A
Alt.sales doc. type2
Variant
Corr.delivery type                                 Delivery block
Usage
MRP for DlvSchType
Delivery type        LF    Outbound Delivery       Immediate delivery
Delivery block
Shipping conditions 01    standard
ShipCostInfoProfile
Dlv-rel.billing type F2    Invoice                 CndType line items   EK02
Order-rel.bill.type F2    Invoice                 Billing plan type
Intercomp.bill.type IV    Intercompany Billing    Paymt guarant. proc. 01
Billing block                                      Paymt card plan type 03
                                                   Checking group       01
Lead time in days
Date type
Prop.f.pricing date
Prop.valid-from date
PricProcCondHeadr                                  Contract data allwd.
PricProcCondItem                                   FollUpActivityType
Contract profile                                   Subseq.order type
Billing request      DR                            Check partner auth.
Group Ref. Procedure
Business transaction
2) customize condition type with ZDEF(deferred revenue), ZREB(rebate)
3) define consition type ZDEF
Condit. type ZDEF Deferred Revnue       Access seq.   PR02 Price with Release St
Cond. class   B Prices                                 Plus/minus      positive a
Calculat.type C Quantity
Cond.category
Rounding rule   Commercial
StrucCond.
                                        GrpCond.routine
Manual entries      D Not possible to process manually
valid from      Today's date             PricingProc
Valid to        31.12.9999               delete fr. DB
RefConType
RefApplicatio
Scale basis   C Quantity scale           Scale formula
Check value   A Descending               Unit of meas.
Scale type      can be maintained in con
                                         Exclusion
                                         Pricing date    Standard (KOMK-PRSDT; ta
                                         Rel.Acc.Assig   Relevant for account ***
TextDetPrc                               Text ID       0001 Internal comment
Condit. type ZREB Rebate                Access seq.   K005 Customer/Material Dis
Cond. class   A Discount or surcharge                  Plus/minus    X Negative
Calculat.type C Quantity
Cond.category
Rounding rule   Commercial
StrucCond.
                                        GrpCond.routine
Manual entries      D Not possible to process manually
valid from      Today's date             PricingProc
Valid to        31.12.9999               delete fr. DB
RefConType
RefApplicatio
Scale basis   C Quantity scale           Scale formula
Check value   A Descending               Unit of meas.
Scale type      can be maintained in con
                                         Exclusion
                                         Pricing date    Standard (KOMK-PRSDT; ta
                                         Rel.Acc.Assig   Relevant for account ***
TextDetPrc                               Text ID       0001 Internal comment
item category is
ZTAN - FOC item category

Hi,
What u can do is.
1.check what pricing procedure assigned to ur order .
header->sales
2.check access sequence of condition types that u can see in ur condition tab page in order.[vk12]
3.In vov7 set billing relevance as A-not relavent for billing,pricing as B -free of charge.
Hope it works.
Regards,
Sharad

ITEM DETAILS: CONFIGURATION in sales order

Dear guru,
In the sale order if we want to see the variant configuration details for a particular line item then after selecting the line item we press
the ITEM DETAILS: CONFIGURATION icon. Once we press this icon then the system will take us to a display characteristic value screen where we
can see the configuration details of that particular line item. But now in PRODUCTION SYSTEM we are not finding any value for a variant
configuration material in the sale order display characteristic value screen, eventhough it is maintained in the material master MRP3 view.
But in deveploment client it is showing correctly.
Pl. suggest

Get with the VC person and have them move all the model details to PRD

Creating sales order using web dynpro JAVA

Hello everyone,
i am new to web dynpro. Can any one tell me how to creating sales order by web dynpro JAVA using BAPI.
Thanks.
Vinita Sharma

Hi...
you can use Adaptive RFC methodology in web dynpro java to work with BAPIs..... these are standard bapi's provided
Here are required Bapis... select which one you want....
BAPISDORDER_GETDETAILEDLIST Sales Order: List of All Order Data
BAPI_ORDER_CHANGE_STATUS_GET Change status for order
BAPI_SALESDOCU_CREATEFROMDATA Creating a Sales Document
BAPI_SALESORDER_CHANGE Sales Order: Change Sales Order
BAPI_SALESORDER_CREATEFROMDAT1 Sales Order: Create Sales Order
BAPI_SALESORDER_CREATEFROMDAT2 Sales Order: Create Sales Order
BAPI_SALESORDER_CREATEFROMDATA Create sales order, no more maintenance
BAPI_SALESORDER_GETLIST Sales order: List of all orders for customer
BAPI_SALESORDER_GETSTATUS Sales order: Display status
BAPI_SALESORDER_SIMULATE Sales Order: Simulate Sales Order
check this thread SALES ORDER creation using BAPI
sample java program which will call SAP bapi function sales order create
PradeeP

Sales Order display in CNMM

Similar Messages

Maybe you are looking for