Samples database starting failed
Hi.
When i start the samples database it always failed (it appears and dissappears at once), so when i try the livecycle samples tomcat throws this exception:
java.sqj.SQLException: socket creation error
at .... and so on
My os is WindowsXP SP3
Help me, please!
JayanKandathil wrote:
You must be trying to start the Samples database of LiveCycle Data Services?
Yes, I can't start Samples database.
Samples database port is 9002, isn't it? I was looking for it in TCPView, but didn't find. So i think 9002 is free.
I have no firewall and stopped antivirus.
I tried to change database port in server.properties file, but it didn't helped...
Thanks for your answer, JayanKandathil!
Similar Messages
-
J2EE Engine start error: Database initialization failed!
My J2EE engine now fails to start - jcontrol stays yellow. I've followed Troubleshooting pages from help.sap.com Admin manual topic "starting J2EE Engine".
Background:
I was running through JDI Scenario 2+ on a fresh installed WebAS 6.40 at SP9. Using NWDevStudio2.09, I attempted to load a DC, but servers stopped responding. So I downed everything (in MMC) including offlining the DB, then put DB back online and restart the J2E engine, and now jcontrol stays yellow.
I find this in the file log_bootstrap_ID0014430.0.log:
Apr 7, 2005 3:10:23 PM ] Bootstrap MODE:
[Apr 7, 2005 3:10:23 PM ] <INSTANCE GLOBALS>
[Apr 7, 2005 3:10:23 PM ] determined by parameter [ID0014430].
[Apr 7, 2005 3:10:23 PM ] -
[Apr 7, 2005 3:10:26 PM ] Exception occured:
com.sap.engine.bootstrap.SynchronizationException: Database initialization failed! Check database properties!
at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:422)
at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:813)
.........a few lines cut out here..........
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
==[ Caused by: ]==----
com.sap.engine.frame.core.configuration.ConfigurationException: Error while connecting to DB.
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:344)
............ a few lines cut out here..........
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Caused by: com.sap.dbtech.jdbc.exceptions.JDBCDriverException: SAP DBTech JDBC: Cannot connect to jdbc:sapdb://PHI21811/J2E [Cannot connect to host PHI21811 [Connection refused: connect], -813.].
at com.sap.dbtech.jdbc.DriverSapDB.connect(DriverSapDB.java:183)
at com.sap.sql.jdbc.NativeConnectionFactory.createNativeConnection(NativeConnectionFactory.java:219)
at com.sap.sql.connect.OpenSQLDataSourceImpl.createPooledConnection(OpenSQLDataSourceImpl.java:570)
at com.sap.sql.connect.OpenSQLDataSourceImpl.getPooledConnection(OpenSQLDataSourceImpl.java:263)
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:294)
... 14 more
[Apr 7, 2005 3:10:26 PM ] [Bootstrap module]> Problem occured while performing synchronization.
[Apr 7, 2005 3:22:24 PM ] -
ANYONE HAVE ANY SUGGESTIONS?????Using the Database Administration section of the help.sap.com library, I found the location of SAPDB/MySQL log files. They are in C:\sapdb\data\wrk\J2E. In 'knldiag' I found entries complaining of Log files being full and tasks put in suspension.
So I figured out to do a full back up of the DB and/or backup the log files. The log file bar (in MMC) still showed 100% full, but I figured out to refresh the view and voila it was empty (so one of the backups emptied it, not sure which one).
After that the DB comes up fine and now my J2E WebAS goes all green.
Message was edited by: Michael W Rains -
CiscoWorks 3.2 ANI database engine failed to start
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman";
mso-ansi-language:#0400;
mso-fareast-language:#0400;
mso-bidi-language:#0400;}
CiscoWorks ANI database engine failed to start ...
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman";
mso-ansi-language:#0400;
mso-fareast-language:#0400;
mso-bidi-language:#0400;}
We suppose we have found following bug. This is output from one discussion on Netpro https://supportforums.cisco.com/message/665869#665869 .
CSCsb52873
ANI Server fails to start
This problem occurs when you:
Start ANI Server, the server is up for sometime and shuts down with RC as -2 and Info as ANI Server failed to load from the database.
Workaround:
Stop the Daemon Manager. Re-initialize ANI database and start the daemons.
Enter the following command to reinitialize ANI database:
/opt/CSCOpx/bin/perl /opt/CSCOpx/bin/dbRestoreOrig.pl dsn=ani dmprefix=ANI
You should not be using this interface to start any CiscoWorks services. Your statup parameters look okay. Either your ANI database is corrupt, or your transaction log is corrupt.
First, set the CiscoWorks Daemon Manager service to Manual, and reboot the server. When the server reboots, delete NMSROOT\databases\ani\ani.log if it exists. Then run:
NMSROOT\objects\db\win32\dbsrv9 -f NMSROOT\databases\ani\ani.db
After that, set the Daemon Manager service back to Automatic, and reboot again. See if the ANI database engine starts. If not, you will need to reinitialize your ANI database with the command:
NMSROOT\bin\perl NMSROOT\bin\dbRestoreOrig.pl dsn=ani dmprefix=ANI
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman";
mso-ansi-language:#0400;
mso-fareast-language:#0400;
mso-bidi-language:#0400;}
We have done reinitializing:
1. Delete NMSROOT\databases\ani\ani.log
NMSROOT\objects\db\win32\dbsrv10 -f NMSROOT\databases\ani\ani.db
After that done
NMSROOT\bin\perl NMSROOT\bin\dbRestoreOrig.pl dsn=ani dmprefix=ANI
After reinitializing ANI database took 1 hour to start, output of pdshow command was
INFO: Daemon manager is processing other tasks in the queue. Please try again later.
In RME there is another problem:
JRM Service could be down. Check whether JRM services are running .
Tried to resolve by reinitializingRME
NMSROOT\bin\perl.exe NMSROOT\bin\dbRestoreOrig.pl dsn=rmeng dmprefix=RME
But did not help.
We are attaching some log files...
Thanks in advance...You are most likely seeing a port conflict between LMS and the Windows RM service. You can either shutdown the Windows Remote Management service, then restart Daemon Manager, or do the following:
* Shutdown Daemon Manager
* Remove ctmregistry* from NMSROOT/MDC/tomcat/webapps/rme/WEB-INF/lib.
* With Windows Remote Management still running, restart Daemon Manager, and EssentialsDM should skip tcp/47001 because it is already in use. -
Start extract msext: OGG-00551 Database operation failed
Hi all,
GG Sqlserver2008 to Oracle11gR2.
I have configured the above setup.
Initial LOAD was successful, using the following prms
Source:(inext.prm)
=====
SOURCEISTABLE
SOURCEDB HR, userid sa, password sa
RMTHOST dtc-pc, MGRPORT 7809
RMTFILE d:\GGora\dirdat\ex
TABLE hrschema.emp;
Target: (inload.prm)
=====
SPECIALRUN
END RUNTIME
USERID gg_user, PASSWORD welcome1
EXTFILE d:\ggora\dirdat\ex
SOURCEDEFS d:\ggora\dirdef\emp.def
MAP hrschema.emp, TARGET gg_user.emp;
Then I proceed to LIVE DATA CAPTURE. But my extract process got error? maybe the prm is not correct?
Source: (msext.prm)
===============
EXTRACT MSEXT
TRANLOGOPTIONS MANAGESECONDARYTRUNCATIONPOINT
SOURCEDB HR, userid sa, password sa
RMTHOST dtc-pc, MGRPORT 7809
RMTTRAIL d:\ggora\dirdat\ms
TABLE HRSCHEMA.EMP;
Target: (msrep.prm)
==============
REPLICAT MSREP
USERID gg_user, PASSWORD welcome1
SOURCEDEFS d:\ggora\dirdef\emp.def
MAP hrschema.emp, TARGET gg_user.emp;
I got error on the source EXTRACT MSEXT
2013-06-21 23:35:01 ERROR OGG-00551 Database operation failed: Couldn't connect to HR. ODBC error: SQLSTATE 37000 native database error 4060. [Microsoft][ODBC SQL Server Driver][SQL Server]Cannot open database "emp" requested by the login. The login failed.
2013-06-21 23:35:01 ERROR OGG-01668 PROCESS ABENDING.
ggserr.log
=======
2013-06-21 23:31:18 INFO OGG-00983 Oracle GoldenGate Manager for SQL Server, mgr.prm: Manager started (port 7808).
2013-06-21 23:32:37 INFO OGG-00987 Oracle GoldenGate Command Interpreter for SQL Server: GGSCI command (DTC): start manager.
2013-06-21 23:35:00 INFO OGG-00987 Oracle GoldenGate Command Interpreter for SQL Server: GGSCI command (DTC): start extract msext.
2013-06-21 23:35:00 INFO OGG-00963 Oracle GoldenGate Manager for SQL Server, mgr.prm: Command received from GGSCI on host DTC-PC.domain:51376 (START EXTRACT MSEXT ).
2013-06-21 23:35:00 INFO OGG-00975 Oracle GoldenGate Manager for SQL Server, mgr.prm: EXTRACT MSEXT starting.
2013-06-21 23:35:01 INFO OGG-00992 Oracle GoldenGate Capture for SQL Server, MSEXT.prm: EXTRACT MSEXT starting.
2013-06-21 23:35:01 INFO OGG-03035 Oracle GoldenGate Capture for SQL Server, MSEXT.prm: Operating system character set identified as windows-1252. Locale: en_PH, LC_ALL:.
2013-06-21 23:35:01 ERROR OGG-00551 Oracle GoldenGate Capture for SQL Server, MSEXT.prm: Database operation failed: Couldn't connect to HR. ODBC error: SQLSTATE 37000 native database error 4060. [Microsoft][ODBC SQL Server Driver][SQL Server]Cannot open database "emp" requested by the login. The login failed.
2013-06-21 23:35:01 ERROR OGG-01668 Oracle GoldenGate Capture for SQL Server, MSEXT.prm: PROCESS ABENDING.
=========
I can login to HR using ggsci
=====================
GGSCI (DTC-PC) 8> dblogin sourcedb hr, userid sa, password sa
2013-06-22 00:23:26 INFO OGG-03036 Database character set identified as windows-1252. Locale: en_US.
2013-06-22 00:23:26 INFO OGG-03037 Session character set identified as windows-1252.
Successfully logged into database.
Please help...
Thanks a lot,
zxyHi all,
For the succeeding LIVE CAPTURE LOADING:
I resolved my issue by using the ODBC System DSN "Sqlserver native client" driver.
It failed if I use the ODBC System DSN "Sqlserver" driver
On the other hand the INITIAL LOAD, is good with the reverse.
It is ok with the DSN "Sqlserver" driver only and not the native client driver.
Thanks a lot, -
What are the ODBC connect details for the HR sample database?
I have installed Oracle Express on Ubuntu 8.10 and read the Getting Started tutorials. Everything worked fine.
THE DSN
I need to connect via ODBC, to start with to the HR sample database on my PC.
The Getting Started tutorial says the userid and password are both hr, but what is the data source name (dsn) to be used with the SQLConnect?
THE INIs
The ini files below are the result of googling, not of any insight on my part.
/etc/odbcinst.ini
[OracleExpressdrv]
Driver = /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/lib/libsqora.so.10.1
Description = Oracle 10g express driver
/etc/odbc.ini
[hrdsn]
Driver = OracleExpressdrv
Application Attributes = T
Attributes = W
BatchAutocommitMode = IfAllSuccessful
CloseCursor = F
DisableDPM = F
DisableMTS = T
DSN = TestDSN
EXECSchemaOpt =
EXECSyntax = T
Failover = T
FailoverDelay = 10
FailoverRetryCount = 10
FetchBufferSize = 64000
ForceWCHAR = F
Lobs = T
Longs = T
MetadataIdDefault = F
QueryTimeout = T
ResultSets = T
# ServerName is TNS_alias_from_tnsnames.ora
ServerName = OraDB
SQLGetData extensions = F
Translation DLL =
Translation Option = 0
UserID = ken
THE ENVIRONMENT
Before running my odbc test program I issued
LD_LIBRARY_PATH=/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/lib;export LD_LIBRARY_PATH
and checked via env command that the ldlibpath actually had been set correctly.
After SQLConnect received the following error:
Usage error: SQLConnect: dsn=hrdsn, user=hr, password=hr <<< output by my test program
1: st=IM002, nerr=0, msg=
[unixODBC][Driver Manager]Data source name not found, and no default driver specified
The first part of the error message hints at there being something wrong with dsn=hrdsn. I don't understand the second part 'and no default driver specified'.
I am totally stuck. Advice would be most appreciated.Oracle® Database Express Edition Installation Guide for Linux talks about Compiling the Oracle ODBC Driver Demos. It tells you to download and install the unixODBC DriverManager from unixODBC. On Ubuntu this is already preinstalled and/or available via the Synaptic Manager. It also instructs you to run a makefile demo_xe.mk to build an odbcdemo program. The makefile did not work for me (hundreds of compilation errors), but I looked at the odbcdemo.c code and could see that dsn=TESTDBDSN for user=hr and password=hr. In other words, by luck the demo program seems to be connecting to the HR sample database.
I changed the /etc/odbc.ini file to:
[TestDBDSN]
Application Attributes = T
Attributes = W
BatchAutocommitMode = IfAllSuccessful
CloseCursor = F
DisableDPM = F
DisableMTS = T
Driver = OracleExpressdrv
DSN = TestDBDSN
and also in my test program which now produced the following error:
Usage error: SQLConnect: dsn=TestDBDSN, user=hr, password=hr
1: st=IM004, nerr=0, msg=
[unixODBC][Driver Manager]Driver's SQLAllocHandle on SQL_HANDLE_HENV failed
which shows that the unixODBC driver manager has loaded the driver and that the driver immediately encountered problems.
The sql calls issued before the SQLConnect("TestDBDSN", "hr" , "hr") were OK, i.e. these:
rc0 = SQLAllocHandle ( SQL_HANDLE_ENV , SQL_NULL_HANDLE , &henv ) ;
rc = SQLSetEnvAttr ( henv, SQL_ATTR_ODBC_VERSION , *)SQL_OV_ODBC3 , 0 ) ;
rc = SQLAllocHandle ( SQL_HANDLE_DBC , henv , &hdbc ) ;
SQLSetConnectAttr ( hdbc , SQL_LOGIN_TIMEOUT , (void*)5 , 0 ) ;
However, the error appears after SQLConnect and yet the rc0 was reported as OK.
The error message 'Driver's SQLAllocHandle on SQL_HANDLE_HENV failed' is totally unhelpful to me as a user since I don't know the conditions that lead to failure. I really think this calls for some documentation. Such documentation should be complete, self-contained and correct and give ALL OPERATIONAL steps, i.e. I want to know exactly what I have to do. Ambiguous English often referring to undefined terms is not what Oracle beginners like myself want.
I don't know if this is a bug. It is so fundamental that Oracle ODBC driver writers could/should not have got it wrong. The connect does not even start.
I have googled for hours, but every lead has failed.
I don't want to give up on this. What can I do? -
Error in creation of sample database during installation of Oracle8
I am trying to install Oracle8 for Intel Solaris8. Near the end of installation - running database configuration assitant, the creation of the sample database failed by an alert:
ORA-03114: not connected to ORACLE
I also tried to run database configuration assistant in custom mode separately, "ORACLE not available" message came up.
I think ORACLE should be connected and running before creation of the sample DB, like installation of Oracle in Windows.
Anyone has the same problem or can give me a help?
The Oracle(8.1.7) CD comes with Solaris8 (07/01) package.
Thanks.I would guess that your kernal parameters have not been set. Check you oracle install guide for the appropriate additions to /etc/system for semiphores and shared memory segments. If you have not made these changes, the database will not come up.
...jcd... -
Crystal reports "Database login failed" when using push method
I have a web application (ASP.NET, .NET v3.5), that pushes data to a CR 2008 report. On two servers one of the three reports returns a "Database login failed" error. I am stumped since there is no login, it's push not pull; in addition the problem is hard to debug since it works fine from my developers workstation. I have "updated" the xsd in that report, reinstalled the app, etc., non of which helped. If anyone has a solution or even ideas I'd appreciate the help.
What about following the troubleshooting steps as described in the blog;
Create an XML file off of your dataset. Make sure this is done just before you set the dataset to the report:
rpt.Load(rptPath)
myDataset.WriteXml(xmlPath, XmlWriteMode.WriteSchema)
rpt.SetDataSource(myDataset)
Copy the above created XML to your development system
Open the problem report in the Crystal Reports designer
In the Desigger, go to the Database menu and select u201CSet Datasource Locationu201D
In the u201CReplace with:u201D pane, expand the u201CCreate New Connectionu201D folder.
Double click the u201CADO .NET (XML)u201D icon
Browse to the location of the XML file you created in step (1)
Click on the path to the XML. The <Update> button should enable
Click on the <Update> button
Typically, either of the following will happen:
You will get a u201CMap Fieldsu201D dialog. This indicates that the XML written off of your dataset does not match what the report is expecting. This may be due to incorrect fields name, incorrect field type, etc. You will now need eliminate the difference.
Incorrect data or no data. There is an issue with your dataset and you need to determine why the data is not present in your dataset. Looking at the XML may be a good place to start.
Ludek -
Issue while installing WCS using omii.ini: Database ping failed
Hi,
I am trying to install WCS on local linux VM. I am following the document 'Oracle WebCenter Sites: Installing on Oracle WebLogic Application Server".
Following are the things I have been able to do successfully:
Install Oracle DB, create a database and then create a user for this database
Install WebLogic server, create domain, create admin server, managed server, and finally create a datasource. THe datasource connection to the DB created in step 1 above is successfull.
I downloaded the WCS installer from Oracle Website 'WebCenterSites_11.1.1.6_bp1'. I am installing using silent installer using omii.ini file.
During installation, on receiving the prompt to install CS and CAS applications, I installed them successfully via WebLogic console.
I tested the URL 'http://localhost:7001/cs/HelloCS' and it showed me the Oracle WCS 11g page.
Now, when I go back to the wcs installation terminal and hit Enter, it gives following error:
[2013-07-11 01:32:21.861][CS.INSTALL][INFO] 1. If your platform requires you to manually deploy the Sites application, deploy Sites now. Otherwise, continue with step 2 2. Restart your application server. 3. Test the URL http:////HelloCS to see if application is deployed successfully 4. If the test is successful, press ENTER. URL http://localhost:7001/cs/HelloCS [2013-07-11 01:41:16.841][CS.INSTALL][INFO] CSSetupEngine.testConnectionAction: Testing user configuration and database connectivity. [2013-07-11 01:41:17.118][CS.INSTALL][INFO] CSSetupEngine.postURL: PostURL success for http://localhost:7001/cs/HelloCS [2013-07-11 01:41:17.118][CS.INSTALL][INFO] CSSetupEngine.testConnectionAction: Web Server and Application Server Configuration test finished successfully. [2013-07-11 01:41:17.118][CS.INSTALL][INFO] CSSetupEngine.testConnectionAction: Attempting to Ping the Database. [2013-07-11 01:41:17.459][CS.INSTALL][ERROR] CSSetupEngine.doPing: Database Ping Failed. Make sure your application server and web server are running. Response received = HTTP/1.1 200 OK HOST_SERVICE: FutureTenseContentServer:11.1.1.6.1 Transfer-Encoding: chunked Date: Wed, 10 Jul 2013 20:11:17 GMT Set-Cookie: JSESSIONID=vpMNRd1Fwb1NJyb5NH1pXx5dfmPhzzyJL2S3yYry3FwQqL8hFVJ6!1994306862; path=/; HttpOnly Content-Type: text/html; charset=UTF-8 X-Powered-By: Servlet/2.5 JSP/2.1 [2013-07-11 01:41:17.459][CS.INSTALL][ERROR] CSSetupEngine.doPing: Database Ping Failed. Make sure your application server and web server are running. Response received = HTTP/1.1 200 OK HOST_SERVICE: FutureTenseContentServer:11.1.1.6.1 Transfer-Encoding: chunked Date: Wed, 10 Jul 2013 20:11:17 GMT Set-Cookie: JSESSIONID=vpMNRd1Fwb1NJyb5NH1pXx5dfmPhzzyJL2S3yYry3FwQqL8hFVJ6!1994306862; path=/; HttpOnly Content-Type: text/html; charset=UTF-8 X-Powered-By: Servlet/2.5 JSP/2.1 [2013-07-11 01:41:17.460][CS.INSTALL][ERROR] CSSetupEngine.testConnectionAction: Database Ping was attempted with WCSDataSource as the DSN. The URL that was passed in = http://localhost:7001/cs/CatalogManager. Please Check your connection and property files settings. [2013-07-11 01:41:17.460][CS.INSTALL][ERROR] CSSetupEngine.testConnectionAction: Install was unable to ping the database. Installation has halted. [2013-07-11 01:41:17.461][CS.INSTALL][ERROR] Worker.run. Install failed. Please check log file. Click Yes to modify your install choices and re-try install. Click No to terminate application.
It looks like DB ping is getting failed.
But I am not sure how to resolve this error.
Please help. I am pasting the content of my bea_omii.ini file that I have used. (Please view as HTML, as formatting is getting lost on this page.)
Do let me know if any other information is required from my end.
bea_omii.ini:
#ContentServer install properties #Thu Apr 17 12:03:27 IST 2008 # Content Server Information # Specify the directory where you want to install Content Server i.e on windows C\:/csinstall on unix /opt/csinstall CSInstallDirectory=/home/oracle/WCS # Path to the Shared Directory i.e on windows C\:/csinstall/Shared on unix /opt/csinstall/Shared CSInstallSharedDirectory=/home/oracle/WCS/Shared # For delivery installation set Development to false Development=true # CSInstallType single/upgrade/cluster default is single only needed for upgrade or cluster #CSInstallType=single # This is to select APPSERVER Note: PORTALSERVER is not supported CSInstallPlatformType=APPSERVER # Set the application/portal server you want to install # Possible options are: wls92 for ( weblogic server), websphere60 (for webshpere), tomcat5 (for tomcat) CSInstallAppServerType=wls92 # Set the path to the server directory ex. For weblogic, on windows CSInstallAppServerPath=C\:\\bea\\wlserver_10.3 # on unix CSInstallAppServerPath=/u01/software/bea/wlserver_10.3 CSInstallAppServerPath=/home/oracle/Oracle/Middleware/wlserver_10.3 # [WEBLOGIC ONLY] Set the path to the weblogic domain i.e. on windows CSInstallWLDomainPath=C\:/bea/user_projects/domains/base_domain # on unix CSInstallWLDomainPath=/u01/software/bea/user_projects/domains/base_domain CSInstallWLDomainPath=/home/oracle/Oracle/Middleware/user_projects/domains/WCSDomain # [WEBLOGIC ONLY] Set the weblogic domain name i.e. base_domain name from path C\:/bea/user_projects/domains/base_domain CSInstallAdminDomainName=WCSDomain # Option for manual deployment (Should always be set to true) CSInstallbManual=true #Manual deployment needs to set the path where installer has to explode the war CSManualDeployPath=/home/oracle/WCS/deployment # Set the context path for your web application for example /cs/ sCgiPath=/cs/ # Set the database type Possible options #CSInstallDatabaseType= [SQL Server, DB2, Oracle10] CSInstallDatabaseType=Oracle10 # Set the data source name CSInstallDBDSN=WCSDataSource # By default it is installed as a primary cluster member. To install as cluster member make CSInstallType=cluster. CSInstallType=single #WEM installation IsWEMInstall=TRUE #hostname where cs is installed CASHostName=localhost # port number of cs installation CASPortNumber=7003 #Server HostName of internally accessible CAS CASHostNameLocal=localhost #Server PortNumber of internally accessible CAS CASPortNumberLocal=7003 #Server HostName where CAS is actually deployed CASHostNameActual=localhost # Select the default logger name (possible values com.fatwire.cs.core.logging.StandardLog, com.fatwire.cs.core.logging.TraditionalLog # com.fatwire.cs.core.logging.StandardTraditionalLog , org.apache.commons.logging.impl.Log4JLogger LoggerName=org.apache.commons.logging.impl.Log4JLogger # Set the host name where the application will be running CSInstallWebServerAddress=localhost # Set the port number where the application will be running CSInstallWebServerPort=7001 # Set this property to true if you are installing Spark CSInstallSpark=false # Sample Sites Information # Set this true if you want to install Avisports sample site. Avisports=true # CS-Direct and CS-Direct Advantage properties. Please don't touch them ContentCentre=true CatalogCentre=true # Set this true if you want to install CS Engage otherwise false MarketingStudio=true # Set this to true if you want to install Commerce Connectors CommerceConnector=true # Set this to true to install Structure and Navigation for FS2 this is only installed if this is development mode FSCore=true # Set this to true to install Engage Extensions for Structure and Navigation. This depends on Development and FSCore FSEngageCore=true # Set this to true to install Store Schema. This depends on Development and FSCore FSStoreSchema=true # Set this to true to install Engage Extensions for Store Schema. This depends on Development, CommereceConnector and FSEngageCore FSEngageStoreSchema=true # Set this to true to install Document Schema. This depends on Development and FSCore FSDocSchema=true # Set this to true to install Sample Visitors. This depends on Development and FSCore FSLocalUser=true # Set this to true to install Pretty URL Package. This depends on Development and FSCore FSPrettyURL=true # Set this to true to install Store Demo Data. This depends on Development and FSStoreSchema FSStoreDemoData=true # Set this to true to install Document Demo Data. This depends on Development and FSDocSchema FSDocDemoData=true # Set this to true to install Engage Store Data. This depends on Development,FSStoreDemoData,FSEngageStoreSchema and FSStoreSchema FSEngageStoreDemoData=true # If you want to install First Site II Site View set it true otherwise false. This depends on Development and FSStoreSchema FSSiteView=true # Set this to true to install Analytics. This depends on Development,FSCore,FSEngageCore,FSStoreSchema,CommerceConnector and CatalogCentre FSAnalytics=true # Set this to true to install Legacy (core) asset types (Article, Linkset). This depends on Development and ContentCentre CCSampleAssets=true # Set this to true to install Burlington Financial asset types. This depends on Development and ContentCentre CCSampleAssetsBF=true # Set this to true to install Engage and Analytics extensions for Burlington Financial. This depends on Development,MarketingStudio and ContentCentre MSSampleAssetsBF=true # Set this to true to install HelloAssetWorld asset types. This depends on Development and ContentCentre CCSampleAssetsHW=true # Set this to true to install GE Lighting asset types. This depends on Development and ContentCentre CatCSampleAssets=true # Set this to true to install Hello World sample site. This depends on Development and ContentCentre CCSampleSiteHW=true # Set this to true to install Burlington Financial sample site. This depends on CCSampleAssets and CCSampleAssetsBF CCSampleSiteBF=true # Set this to true to install Burlington Financial Extensions sample site. MSSampleSiteBF=true # Set this to true to install GE Lighting sample site. MSSampleSiteGE=true # Spark sample site components # Set this to true to install Document Management sample asset types DMSampleAssets=false # Set this to true to install Content Management sample asset types WCMSampleAssets=false # Set this to true to install Base Components SparkSampleSite=false # Set this to true to install Sample Data SparkSampleData=false # Set this to true to install Sample Portlets. Set this true if this is a portal server SparkSamplePortlets=falseThanks for your reply Yct.
I got the ping issue resolved today, there was an issue in the data source. Finally I was able to complete the installation successfully.
But there is one more issue now. After completing the installation, I am trying to access the URL to get to the WCS login page, but with no success.
Below, I am mentioning few URLs that I tried, and the outcome:
http://localhost:7001/cs/HelloCS , This URL gives me a page with some static content messages like 'Welcome to Oracle WebCenter Sites 11gR1'. Then there are some text lines in blue color. I think this page is working as expected.
http://localhost:7001/cs/login , this URL automatically gets redirected to the URL 'http://localhost:7003/cas/login?service=http%3A%2F%2Flocalhost%3A7001%2Fcs%2Fwem%2Ffatwire%2Fwem%2FWelcome' and I get an error message 'Firefox can't establish a connection to the server at localhost:7003.'
http://localhost:7001/cas/login, this takes me to login page, where when I enter fwadmin@xceladmin credentials, I am taken to JASIG Central Authentication Service page, which is again static, and I can't do anything on this page
http://localhost:7001/cs/Satellite?c=Page&cid=1327351719456&pagename=avisports%2FPage%2FHomeLayout1 , this takes me to the Avisports site, which is functional
http://localhost:7001/cs/Satellite?c=Page&childpagename=FirstSiteII%2FFSIILayout&cid=1124747609916&pagename=FSIIWrapper, this takes me to he FirstSit page, which is again functional
Issue: I am not getting the main login page, where I would get 3 sites(Avisports/FirstsiteII) in the dropdown.
Looks like there is something wrong going on.
Following I am pasting my omii.ini file, if it helps:
#ContentServer install properties
#Thu Apr 17 12:03:27 IST 2008
# Content Server Information
# Specify the directory where you want to install Content Server i.e on windows C\:/csinstall on unix /opt/csinstall
CSInstallDirectory=/home/oracle/WCS
# Path to the Shared Directory i.e on windows C\:/csinstall/Shared on unix /opt/csinstall/Shared
CSInstallSharedDirectory=/home/oracle/WCS/Shared
# For delivery installation set Development to false
Development=true
# CSInstallType single/upgrade/cluster default is single only needed for upgrade or cluster
#CSInstallType=single
# This is to select APPSERVER Note: PORTALSERVER is not supported
CSInstallPlatformType=APPSERVER
# Set the application/portal server you want to install
# Possible options are: wls92 for ( weblogic server), websphere60 (for webshpere), tomcat5 (for tomcat)
CSInstallAppServerType=wls92
# Set the path to the server directory ex. For weblogic, on windows CSInstallAppServerPath=C\:\\bea\\wlserver_10.3
# on unix CSInstallAppServerPath=/u01/software/bea/wlserver_10.3
CSInstallAppServerPath=/home/oracle/Oracle/Middleware/wlserver_10.3
# [WEBLOGIC ONLY] Set the path to the weblogic domain i.e. on windows CSInstallWLDomainPath=C\:/bea/user_projects/domains/base_domain
# on unix CSInstallWLDomainPath=/u01/software/bea/user_projects/domains/base_domain
CSInstallWLDomainPath=/home/oracle/Oracle/Middleware/user_projects/domains/WCSDomain
# [WEBLOGIC ONLY] Set the weblogic domain name i.e. base_domain name from path C\:/bea/user_projects/domains/base_domain
CSInstallAdminDomainName=WCSDomain
# Option for manual deployment (Should always be set to true)
CSInstallbManual=true
#Manual deployment needs to set the path where installer has to explode the war
CSManualDeployPath=/home/oracle/WCS/deployment
# Set the context path for your web application for example /cs/
sCgiPath=/cs/
# Set the database type Possible options
#CSInstallDatabaseType= [SQL Server, DB2, Oracle10]
CSInstallDatabaseType=Oracle10
# Set the data source name
CSInstallDBDSN=WCSDataSource
# By default it is installed as a primary cluster member. To install as cluster member make CSInstallType=cluster.
CSInstallType=single
#WEM installation
IsWEMInstall=TRUE
#hostname where cs is installed
CASHostName=localhost
# port number of cs installation
CASPortNumber=7003
#Server HostName of internally accessible CAS
CASHostNameLocal=localhost
#Server PortNumber of internally accessible CAS
CASPortNumberLocal=7003
#Server HostName where CAS is actually deployed
CASHostNameActual=localhost
# Select the default logger name (possible values com.fatwire.cs.core.logging.StandardLog, com.fatwire.cs.core.logging.TraditionalLog
# com.fatwire.cs.core.logging.StandardTraditionalLog , org.apache.commons.logging.impl.Log4JLogger
LoggerName=org.apache.commons.logging.impl.Log4JLogger
# Set the host name where the application will be running
CSInstallWebServerAddress=localhost
# Set the port number where the application will be running
CSInstallWebServerPort=7001
# Set this property to true if you are installing Spark
CSInstallSpark=false
# Sample Sites Information
# Set this true if you want to install Avisports sample site.
Avisports=true
# CS-Direct and CS-Direct Advantage properties. Please don't touch them
ContentCentre=true
CatalogCentre=true
# Set this true if you want to install CS Engage otherwise false
MarketingStudio=true
# Set this to true if you want to install Commerce Connectors
CommerceConnector=true
# Set this to true to install Structure and Navigation for FS2 this is only installed if this is development mode
FSCore=true
# Set this to true to install Engage Extensions for Structure and Navigation. This depends on Development and FSCore
FSEngageCore=true
# Set this to true to install Store Schema. This depends on Development and FSCore
FSStoreSchema=true
# Set this to true to install Engage Extensions for Store Schema. This depends on Development, CommereceConnector and FSEngageCore
FSEngageStoreSchema=true
# Set this to true to install Document Schema. This depends on Development and FSCore
FSDocSchema=true
# Set this to true to install Sample Visitors. This depends on Development and FSCore
FSLocalUser=true
# Set this to true to install Pretty URL Package. This depends on Development and FSCore
FSPrettyURL=true
# Set this to true to install Store Demo Data. This depends on Development and FSStoreSchema
FSStoreDemoData=true
# Set this to true to install Document Demo Data. This depends on Development and FSDocSchema
FSDocDemoData=true
# Set this to true to install Engage Store Data. This depends on Development,FSStoreDemoData,FSEngageStoreSchema and FSStoreSchema
FSEngageStoreDemoData=true
# If you want to install First Site II Site View set it true otherwise false. This depends on Development and FSStoreSchema
FSSiteView=true
# Set this to true to install Analytics. This depends on Development,FSCore,FSEngageCore,FSStoreSchema,CommerceConnector and CatalogCentre
FSAnalytics=true
# Set this to true to install Legacy (core) asset types (Article, Linkset). This depends on Development and ContentCentre
CCSampleAssets=true
# Set this to true to install Burlington Financial asset types. This depends on Development and ContentCentre
CCSampleAssetsBF=true
# Set this to true to install Engage and Analytics extensions for Burlington Financial. This depends on Development,MarketingStudio and ContentCentre
MSSampleAssetsBF=true
# Set this to true to install HelloAssetWorld asset types. This depends on Development and ContentCentre
CCSampleAssetsHW=true
# Set this to true to install GE Lighting asset types. This depends on Development and ContentCentre
CatCSampleAssets=true
# Set this to true to install Hello World sample site. This depends on Development and ContentCentre
CCSampleSiteHW=true
# Set this to true to install Burlington Financial sample site. This depends on CCSampleAssets and CCSampleAssetsBF
CCSampleSiteBF=true
# Set this to true to install Burlington Financial Extensions sample site.
MSSampleSiteBF=true
# Set this to true to install GE Lighting sample site.
MSSampleSiteGE=true
# Spark sample site components
# Set this to true to install Document Management sample asset types
DMSampleAssets=false
# Set this to true to install Content Management sample asset types
WCMSampleAssets=false
# Set this to true to install Base Components
SparkSampleSite=false
# Set this to true to install Sample Data
SparkSampleData=false
# Set this to true to install Sample Portlets. Set this true if this is a portal server
SparkSamplePortlets=false -
Database Logon Failed which created by Crystal Report 2008
this time i meet the famous error again which is database logon failed.
i created a crystal report 2008 starting from blank report, then connect with odbc
i use 2008 method
objRpt.SetDatabaseLogon(db_username, db_password, odbc_name, database_name);
2008 method will get database logon failed even set database location and verify database again
then i use 8.5 method and try again for 2008 report. it said field name is unknown for one of formula
then i drag field again for formula and set database location and verify database again
it said the same error.
then i uninstall 8.5 crytal report software in window 7 deployment machine, and do above again, it said the same error
//'Create a new Stored Procedure Table to replace the reports current table.
CrystalDecisions.ReportAppServer.DataDefModel.Procedure boTable = new CrystalDecisions.ReportAppServer.DataDefModel.Procedure();
//'boMainPropertyBag: These hold the attributes of the tables ConnectionInfo object
PropertyBag boMainPropertyBag = new PropertyBag();
//'boInnerPropertyBag: These hold the attributes for the QE_LogonProperties
//'In the main property bag (boMainPropertyBag)
PropertyBag boInnerPropertyBag = new PropertyBag();
//'Set the attributes for the boInnerPropertyBag
boInnerPropertyBag.Add("Connect Timeout", "15");
//boInnerPropertyBag.Add("Data Source", "MyDataSource");
boInnerPropertyBag.Add("Data Source", "10.1.1.191");
boInnerPropertyBag.Add("DataTypeCompatibility", "0");
boInnerPropertyBag.Add("General Timeout", "0");
//boInnerPropertyBag.Add("Initial Catalog", "MyCatalog");
boInnerPropertyBag.Add("Initial Catalog", database_name);
boInnerPropertyBag.Add("Integrated Security", "False");
boInnerPropertyBag.Add("Locale Identifier", "1033");
boInnerPropertyBag.Add("MARS Connection", "0");
//boInnerPropertyBag.Add("OLE DB Services", "-5");
//boInnerPropertyBag.Add("ODBC", "-5");
boInnerPropertyBag.Add("ODBC", "Cheque");
boInnerPropertyBag.Add("Provider", "SQLNCLI");
boInnerPropertyBag.Add("Tag with column collation when possible", "0");
boInnerPropertyBag.Add("Trust Server Certificate", "0");
boInnerPropertyBag.Add("Use Encryption for Data", "0");
//'Set the attributes for the boMainPropertyBag
boMainPropertyBag.Add("Database DLL", "crdb_ado.dll");
//boMainPropertyBag.Add("Database DLL", "p2sodbc.dll");
//boMainPropertyBag.Add("QE_DatabaseName", "VEPILOT");
boMainPropertyBag.Add("QE_DatabaseName", database_name);
//boMainPropertyBag.Add("QE_DatabaseType", "OLE DB (ADO)");
boMainPropertyBag.Add("QE_DatabaseType", "ODBC");
//'Add the QE_LogonProperties we set in the boInnerPropertyBag Object
boMainPropertyBag.Add("QE_LogonProperties", boInnerPropertyBag);
boMainPropertyBag.Add("QE_ServerDescription", "MyServer");
boMainPropertyBag.Add("QE_SQLDB", "True");
boMainPropertyBag.Add("SSO Enabled", "False");
//'Create a new ConnectionInfo object
CrystalDecisions.ReportAppServer.DataDefModel.ConnectionInfo boConnectionInfo = new CrystalDecisions.ReportAppServer.DataDefModel.ConnectionInfo();
//'Pass the database properties to a connection info object
boConnectionInfo.Attributes = boMainPropertyBag;
//'Set the connection kind
boConnectionInfo.Kind = CrConnectionInfoKindEnum.crConnectionInfoKindCRQE;
//'*EDIT* Set the User Name and Password if required.
boConnectionInfo.UserName = db_username;
boConnectionInfo.Password = db_password;
//'Pass the connection information to the table
boTable.ConnectionInfo = boConnectionInfo;
CrystalDecisions.ReportAppServer.DataDefModel.Tables boTables = objRpt.ReportClientDocument.DatabaseController.Database.Tables;
CrystalDecisions.CrystalReports.Engine.Tables tables = objRpt.Database.Tables;
foreach (CrystalDecisions.CrystalReports.Engine.Table table in tables)
if (!string.IsNullOrEmpty(table.Name))
//boTable.Name = table.Name;
//boTable.QualifiedName = database_name + ".dbo." + table.Name;
//boTable.Alias = table.Name;
boTable.Name = "sp_ChequeIssueDetRpt";
boTable.QualifiedName = database_name + ".dbo.sp_ChequeIssueDetRpt";
boTable.Alias = "sp_ChequeIssueDetRpt";
objRpt.ReportClientDocument.DatabaseController.SetTableLocation(boTables[0], boTable);
objRpt.VerifyDatabase();
http://sourceforge.net/projects/aspchequesprint/files/ChequeIssueDet.rpt/downloadNo subreport, only a stored procedure with final two lines are
print @m_sql
exec (@m_sql)
After use generated code in the link above
Error at boReportDocument.VerifyDatabase();
Inner Exception : no error
Message "Logon failed"
ErrorID : CrystalDecisions.CrystalReports.Engine.EngineExceptionErrorID.LogOnFailed
HelpLink : null
stacktrace : CrystalDecisions.CrystalReports.Engine.ReportDocument.VerifyDatabase()\r\n at viewReport.Page_Load(Object sender, EventArgs e) 於 d:
Data
My Documents
Visual Studio 2008
WebSites
Cheques
viewReport.aspx.cs: row 1302\r\n at System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e)\r\n at System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e)\r\n at System.Web.UI.Control.OnLoad(EventArgs e)\r\n at System.Web.UI.Control.LoadRecursive()\r\n 於 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
TargetSite : {Void VerifyDatabase()}
string reportPath = report_path + "ChequeIssueDet.rpt";
boReportDocument = new ReportDocument();
//**EDIT** Change the path and report name to the report you want to change.
boReportDocument.Load(reportPath, OpenReportMethod.OpenReportByTempCopy);
//Create a new Stored Procedure Table to replace the reports current table.
CrystalDecisions.ReportAppServer.DataDefModel.Procedure boTable =
new CrystalDecisions.ReportAppServer.DataDefModel.Procedure();
//boMainPropertyBag: These hold the attributes of the tables ConnectionInfo object
PropertyBag boMainPropertyBag = new PropertyBag();
//boInnerPropertyBag: These hold the attributes for the QE_LogonProperties
//In the main property bag (boMainPropertyBag)
PropertyBag boInnerPropertyBag = new PropertyBag();
//Set the attributes for the boInnerPropertyBag
boInnerPropertyBag.Add("Database", database_name);
boInnerPropertyBag.Add("DSN", "Cheque");
boInnerPropertyBag.Add("UseDSNProperties", "False");
//Set the attributes for the boMainPropertyBag
boMainPropertyBag.Add("Database DLL", "crdb_odbc.dll");
boMainPropertyBag.Add("QE_DatabaseName", database_name);
boMainPropertyBag.Add("QE_DatabaseType", "ODBC (RDO)");
//Add the QE_LogonProperties we set in the boInnerPropertyBag Object
boMainPropertyBag.Add("QE_LogonProperties", boInnerPropertyBag);
boMainPropertyBag.Add("QE_ServerDescription", "Cheque");
boMainPropertyBag.Add("QE_SQLDB", "True");
boMainPropertyBag.Add("SSO Enabled", "False");
//Create a new ConnectionInfo object
CrystalDecisions.ReportAppServer.DataDefModel.ConnectionInfo boConnectionInfo =
new CrystalDecisions.ReportAppServer.DataDefModel.ConnectionInfo();
//Pass the database properties to a connection info object
boConnectionInfo.Attributes = boMainPropertyBag;
//Set the connection kind
boConnectionInfo.Kind = CrConnectionInfoKindEnum.crConnectionInfoKindCRQE;
//**EDIT** Set the User Name and Password if required.
boConnectionInfo.UserName = db_username;
boConnectionInfo.Password = db_password;
//Pass the connection information to the table
boTable.ConnectionInfo = boConnectionInfo;
//Get the Database Tables Collection for your report
CrystalDecisions.ReportAppServer.DataDefModel.Tables boTables;
boTables = boReportDocument.ReportClientDocument.DatabaseController.Database.Tables;
//For each table in the report:
// - Set the Table Name properties.
// - Set the table location in the report to use the new modified table
boTable.Name = "sp_ChequeIssueDetRpt;1";
boTable.QualifiedName = database_name+".dbo.sp_ChequeIssueDetRpt;1";
boTable.Alias = "sp_ChequeIssueDetRpt;1";
boReportDocument.ReportClientDocument.DatabaseController.SetTableLocation(boTables[0], boTable);
//Verify the database after adding substituting the new table.
//To ensure that the table updates properly when adding Command tables or Stored Procedures.
boReportDocument.VerifyDatabase();
//**EDIT** Set the value for the Stored Procedure parameters.
string m_curUser = "";
int spid = Convert.ToInt32(Request.Cookies["login_cookie"]["spid"]);
queryString = "select * from v_All_Session where SPID=" + spid.ToString();
//string _connectionString = ConfigurationManager.ConnectionStrings["ChequeConnectionString"].ConnectionString;
using (SqlConnection connection = new SqlConnection(_connectionString))
SqlCommand command = connection.CreateCommand();
command.CommandText = queryString;
connection.Open();
using (SqlDataReader datareader = command.ExecuteReader())
if (datareader.HasRows == true)
while (datareader.Read())
if (datareader["UserID"] != System.DBNull.Value)
m_curUser = datareader["UserID"].ToString();
datareader.Close();
connection.Close();
boReportDocument.SetParameterValue("@UserID", m_curUser);
if (string.IsNullOrEmpty(Session["fm_CoCode"].ToString()))
boReportDocument.SetParameterValue("@fm_CoCode", Session["fm_CoCode"].ToString());
if (string.IsNullOrEmpty(Session["to_CoCode"].ToString()))
boReportDocument.SetParameterValue("@to_CoCode", Session["to_CoCode"].ToString());
if (string.IsNullOrEmpty(Session["fm_BankACNo"].ToString()))
boReportDocument.SetParameterValue("@fm_BankACNo", Session["fm_BankACNo"].ToString());
if (string.IsNullOrEmpty(Session["to_BankACNo"].ToString()))
boReportDocument.SetParameterValue("@to_BankACNo", Session["to_BankACNo"].ToString());
if (string.IsNullOrEmpty(Session["fm_BatchNo"].ToString()))
boReportDocument.SetParameterValue("@fm_BatchNo", Session["fm_BatchNo"].ToString());
if (string.IsNullOrEmpty(Session["to_BatchNo"].ToString()))
boReportDocument.SetParameterValue("@to_BatchNo", Session["to_BatchNo"].ToString());
Edited by: Mathew_666 on Jul 19, 2011 4:27 AM
Edited by: Mathew_666 on Jul 19, 2011 4:28 AM -
Database Started In Restricted Mode...
Dear Exports,
We are using Oracle 10gR2 on Windows server 2008. My database size is approximately 2tb. Now we are going to setup Dataguard for our primary. We started the database with the changer parameters for dataguard and create spfile from pfile. And started the database with Spfile. But after some time i noticed that the database started automatically in Restricted mode. As in our database Previously dataguard was configured, due to the some problem that setup is not working and the logs are not applied in Standby server. I thought may be for this reason database going to restricted mode automatically so i set the log_archive_dest_state_2='DEFFER' and Now I scanned the whore alert.log file and found the same situation of restricted is happening from Jan 2010. Please Suggest some solution how i can over come the problem.
The alertlog when i started the database recently...
ALTER DATABASE CLOSE NORMAL
ORA-1507 signalled during: ALTER DATABASE CLOSE NORMAL...
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Fri Apr 12 19:12:39 2013
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 3
Autotune of undo retention is turned on.
IMODE=BR
ILAT =97
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.4.0.
System parameters with non-default values:
processes = 800
sessions = 885
sga_max_size = 10737418240
__shared_pool_size = 1325400064
__large_pool_size = 16777216
__java_pool_size = 16777216
__streams_pool_size = 0
sga_target = 8589934592
control_files = G:\ORADATA\CONTROL01.CTL, G:\ORADATA\CONTROL02.CTL, G:\ORADATA\CONTROL03.CTL
db_block_size = 8192
__db_cache_size = 7214202880
compatible = 10.2.0.3.0
log_archive_config = DG_CONFIG=(orcl,stdby)
log_archive_dest_1 = LOCATION=I:\archive_log VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=orcl
log_archive_dest_2 = SERVICE=stdby NOAFFIRM ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=stdby
log_archive_dest_state_1 = enable
log_archive_max_processes= 30
log_archive_format = ARC%D_%s_%R.%T
fal_client = orcl
fal_server = stdby
db_file_multiblock_read_count= 16
db_recovery_file_dest = D:\oracle\product\10.2.0\flash_recovery_area
db_recovery_file_dest_size= 2147483648
standby_file_management = AUTO
undo_management = AUTO
undo_tablespace = UNDOTBS1
undo_retention = 5400
remote_login_passwordfile= EXCLUSIVE
db_domain =
dispatchers = (PROTOCOL=TCP) (SERVICE=orclXDB)
local_listener = (ADDRESS=(PROTOCOL=TCP)(HOST=192.168.12.86)(PORT=1521))
job_queue_processes = 10
audit_file_dest = D:\ORACLE\PRODUCT\10.2.0\ADMIN\ORCL\ADUMP
background_dump_dest = D:\ORACLE\PRODUCT\10.2.0\ADMIN\ORCL\BDUMP
user_dump_dest = D:\ORACLE\PRODUCT\10.2.0\ADMIN\ORCL\UDUMP
core_dump_dest = D:\ORACLE\PRODUCT\10.2.0\ADMIN\ORCL\CDUMP
db_name = orcl
open_cursors = 500
pga_aggregate_target = 10737418240
PMON started with pid=2, OS id=14328
PSP0 started with pid=3, OS id=15420
MMAN started with pid=4, OS id=9092
DBW0 started with pid=5, OS id=12360
DBW1 started with pid=6, OS id=18112
LGWR started with pid=7, OS id=18360
CKPT started with pid=8, OS id=18448
SMON started with pid=9, OS id=17160
RECO started with pid=10, OS id=18512
CJQ0 started with pid=11, OS id=19324
MMON started with pid=12, OS id=14380
Fri Apr 12 19:12:40 2013
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=13, OS id=2996
Fri Apr 12 19:12:40 2013
starting up 1 shared server(s) ...
Fri Apr 12 19:12:41 2013
ALTER DATABASE MOUNT
Fri Apr 12 19:12:45 2013
Setting recovery target incarnation to 2
Fri Apr 12 19:12:45 2013
Successful mount of redo thread 1, with mount id 1340307369
Fri Apr 12 19:12:45 2013
Allocated 15937344 bytes in shared pool for flashback generation buffer
Starting background process RVWR
RVWR started with pid=17, OS id=5524
Fri Apr 12 19:12:45 2013
Database mounted in Exclusive Mode
Completed: ALTER DATABASE MOUNT
Fri Apr 12 19:12:46 2013
ALTER DATABASE OPEN
Fri Apr 12 19:12:46 2013
LGWR: STARTING ARCH PROCESSES
ARC0 started with pid=18, OS id=11964
ARC1 started with pid=19, OS id=13472
ARC2 started with pid=20, OS id=17960
ARC3 started with pid=21, OS id=18548
ARC4 started with pid=22, OS id=15660
ARC5 started with pid=23, OS id=15548
ARC6 started with pid=24, OS id=14720
ARC7 started with pid=25, OS id=15780
ARC8 started with pid=26, OS id=17992
ARC9 started with pid=27, OS id=17988
ARCa started with pid=28, OS id=19436
ARCb started with pid=29, OS id=16104
ARCc started with pid=30, OS id=6656
ARCd started with pid=31, OS id=6900
ARCe started with pid=32, OS id=10568
ARCf started with pid=33, OS id=16992
ARCg started with pid=34, OS id=14372
ARCh started with pid=35, OS id=18084
ARCi started with pid=36, OS id=5788
ARCj started with pid=37, OS id=4940
ARCk started with pid=38, OS id=18816
ARCl started with pid=39, OS id=14588
ARCm started with pid=40, OS id=16820
ARCn started with pid=41, OS id=8068
ARCo started with pid=42, OS id=18736
ARCp started with pid=43, OS id=8316
ARCq started with pid=44, OS id=5952
ARCr started with pid=45, OS id=16304
ARCs started with pid=46, OS id=14884
Fri Apr 12 19:12:46 2013
ARC0: Archival started
ARCt started with pid=47, OS id=19408
Fri Apr 12 19:12:46 2013
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARCt: Archival started
LGWR: STARTING ARCH PROCESSES COMPLETE
Thread 1 opened at log sequence 117446
Current log# 10 seq# 117446 mem# 0: G:\ORADATA\REDO10A.LOG
Current log# 10 seq# 117446 mem# 1: H:\ORADATA\REDO10B.LOG
Fri Apr 12 19:12:46 2013
ARC0: Becoming the 'no FAL' ARCH
Fri Apr 12 19:12:46 2013
ARC0: Becoming the 'no SRL' ARCH
Fri Apr 12 19:12:46 2013
ARC8: Becoming the heartbeat ARCH
Fri Apr 12 19:12:47 2013
Successful open of redo thread 1
Fri Apr 12 19:12:47 2013
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Fri Apr 12 19:12:47 2013
SMON: enabling cache recovery
Fri Apr 12 19:12:48 2013
Successfully onlined Undo Tablespace 1.
Fri Apr 12 19:12:48 2013
SMON: enabling tx recovery
Fri Apr 12 19:12:48 2013
Database Characterset is WE8MSWIN1252
Opening with internal Resource Manager plan
where NUMA PG = 1, CPUs = 16
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
QMNC started with pid=48, OS id=10048
Fri Apr 12 19:12:51 2013
Completed: ALTER DATABASE OPEN
Fri Apr 12 19:12:51 2013
Errors in file d:\oracle\product\10.2.0\admin\orcl\bdump\orcl_mmon_14380.trc:
ORA-19815: WARNING: db_recovery_file_dest_size of 2147483648 bytes is 99.56% used, and has 9486336 remaining bytes available.
Fri Apr 12 19:12:51 2013
You have following choices to free up space from flash recovery area:
1. Consider changing RMAN RETENTION POLICY. If you are using Data Guard,
then consider changing RMAN ARCHIVELOG DELETION POLICY.
2. Back up files to tertiary device such as tape using RMAN
BACKUP RECOVERY AREA command.
3. Add disk space and increase db_recovery_file_dest_size parameter to
reflect the new space.
4. Delete unnecessary files using RMAN DELETE command. If an operating
system command was used to delete files, then use RMAN CROSSCHECK and
DELETE EXPIRED commands.
Dump file d:\oracle\product\10.2.0\admin\orcl\bdump\alert_orcl.log
Fri Apr 12 19:13:26 2013
ORACLE V10.2.0.4.0 - 64bit Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows NT Version V6.0 Service Pack 1
CPU : 16 - type 8664, 16 Physical Cores
Process Affinity : 0x0000000000000000
Memory (Avail/Total): Ph:55999M/65533M, Ph+PgF:183151M/193356M
Fri Apr 12 19:13:26 2013
Starting ORACLE instance (restrict)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 3
Autotune of undo retention is turned on.
IMODE=BR
ILAT =97
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.4.0.
System parameters with non-default values:
processes = 800
sessions = 885
sga_max_size = 10737418240
__shared_pool_size = 1325400064
__large_pool_size = 16777216
__java_pool_size = 16777216
__streams_pool_size = 0
sga_target = 8589934592
control_files = G:\ORADATA\CONTROL01.CTL, G:\ORADATA\CONTROL02.CTL, G:\ORADATA\CONTROL03.CTL
db_block_size = 8192
__db_cache_size = 7214202880
compatible = 10.2.0.3.0
log_archive_config = DG_CONFIG=(orcl,stdby)
log_archive_dest_1 = LOCATION=I:\archive_log VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=orcl
log_archive_dest_2 = SERVICE=stdby NOAFFIRM ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=stdby
log_archive_dest_state_1 = enable
log_archive_max_processes= 30
log_archive_format = ARC%D_%s_%R.%T
fal_client = orcl
fal_server = stdby
db_file_multiblock_read_count= 16
db_recovery_file_dest = D:\oracle\product\10.2.0\flash_recovery_area
db_recovery_file_dest_size= 2147483648
standby_file_management = AUTO
undo_management = AUTO
undo_tablespace = UNDOTBS1
undo_retention = 5400
remote_login_passwordfile= EXCLUSIVE
db_domain =
dispatchers = (PROTOCOL=TCP) (SERVICE=orclXDB)
local_listener = (ADDRESS=(PROTOCOL=TCP)(HOST=192.168.12.86)(PORT=1521))
job_queue_processes = 10
audit_file_dest = D:\ORACLE\PRODUCT\10.2.0\ADMIN\ORCL\ADUMP
background_dump_dest = D:\ORACLE\PRODUCT\10.2.0\ADMIN\ORCL\BDUMP
user_dump_dest = D:\ORACLE\PRODUCT\10.2.0\ADMIN\ORCL\UDUMP
core_dump_dest = D:\ORACLE\PRODUCT\10.2.0\ADMIN\ORCL\CDUMP
db_name = orcl
open_cursors = 500
pga_aggregate_target = 10737418240
PMON started with pid=2, OS id=18668
PSP0 started with pid=3, OS id=17668
MMAN started with pid=4, OS id=16896
DBW0 started with pid=5, OS id=18204
DBW1 started with pid=6, OS id=16976
LGWR started with pid=7, OS id=14552
CKPT started with pid=8, OS id=4480
SMON started with pid=9, OS id=10236
RECO started with pid=10, OS id=11832
CJQ0 started with pid=11, OS id=18844
MMON started with pid=12, OS id=15320
Fri Apr 12 19:13:27 2013
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=13, OS id=14944
Fri Apr 12 19:13:27 2013
starting up 1 shared server(s) ...
Fri Apr 12 19:13:27 2013
alter database orcl mount exclusive
Fri Apr 12 19:13:31 2013
Setting recovery target incarnation to 2
Fri Apr 12 19:13:31 2013
Successful mount of redo thread 1, with mount id 1340305111
Fri Apr 12 19:13:31 2013
Allocated 15937344 bytes in shared pool for flashback generation buffer
Starting background process RVWR
RVWR started with pid=17, OS id=12880
Fri Apr 12 19:13:31 2013
Database mounted in Exclusive Mode
Completed: alter database orcl mount exclusive
Fri Apr 12 19:13:31 2013
alter database open
Fri Apr 12 19:13:31 2013
Beginning crash recovery of 1 threads
parallel recovery started with 15 processes
Fri Apr 12 19:13:31 2013
Started redo scan
Fri Apr 12 19:13:31 2013
Completed redo scan
735 redo blocks read, 211 data blocks need recovery
Fri Apr 12 19:13:31 2013
Started redo application at
Thread 1: logseq 117446, block 97761
Fri Apr 12 19:13:31 2013
Recovery of Online Redo Log: Thread 1 Group 10 Seq 117446 Reading mem 0
Mem# 0: G:\ORADATA\REDO10A.LOG
Mem# 1: H:\ORADATA\REDO10B.LOG
Fri Apr 12 19:13:31 2013
Completed redo application
Fri Apr 12 19:13:32 2013
Completed crash recovery at
Thread 1: logseq 117446, block 98496, scn 7310601900
211 data blocks read, 211 data blocks written, 735 redo blocks read
Fri Apr 12 19:13:33 2013
LGWR: STARTING ARCH PROCESSES
ARC0 started with pid=33, OS id=18508
ARC1 started with pid=34, OS id=14692
ARC2 started with pid=35, OS id=17728
ARC3 started with pid=36, OS id=12476
ARC4 started with pid=37, OS id=19228
ARC5 started with pid=38, OS id=11552
ARC6 started with pid=39, OS id=7576
ARC7 started with pid=40, OS id=6244
ARC8 started with pid=41, OS id=18468
ARC9 started with pid=42, OS id=18492
ARCa started with pid=43, OS id=10352
ARCb started with pid=44, OS id=15516
ARCc started with pid=45, OS id=18216
ARCd started with pid=46, OS id=5660
ARCe started with pid=47, OS id=18756
ARCf started with pid=48, OS id=17828
ARCg started with pid=49, OS id=8696
ARCh started with pid=50, OS id=17736
ARCi started with pid=51, OS id=16736
ARCj started with pid=52, OS id=13208
ARCk started with pid=53, OS id=12012
ARCl started with pid=54, OS id=19180
ARCm started with pid=55, OS id=16632
ARCn started with pid=56, OS id=17588
ARCo started with pid=57, OS id=11948
ARCp started with pid=58, OS id=18416
ARCq started with pid=59, OS id=17888
ARCr started with pid=60, OS id=2144
ARCs started with pid=61, OS id=14392
Fri Apr 12 19:13:33 2013
ARC0: Archival started
ARCt started with pid=62, OS id=19264
Fri Apr 12 19:13:33 2013
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARCt: Archival started
LGWR: STARTING ARCH PROCESSES COMPLETE
Fri Apr 12 19:13:33 2013
Thread 1 advanced to log sequence 117447 (thread open)
Thread 1 opened at log sequence 117447
Current log# 8 seq# 117447 mem# 0: G:\ORADATA\REDO08A.LOG
Current log# 8 seq# 117447 mem# 1: H:\ORADATA\REDO08B.LOG
Successful open of redo thread 1
Fri Apr 12 19:13:33 2013
ARC3: Becoming the 'no FAL' ARCH
Fri Apr 12 19:13:33 2013
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Fri Apr 12 19:13:33 2013
ARC3: Becoming the 'no SRL' ARCH
Fri Apr 12 19:13:33 2013
ARCr: Becoming the heartbeat ARCH
Fri Apr 12 19:13:33 2013
SMON: enabling cache recovery
Fri Apr 12 19:13:33 2013
Successfully onlined Undo Tablespace 1.
Fri Apr 12 19:13:33 2013
SMON: enabling tx recovery
Fri Apr 12 19:13:33 2013
Database Characterset is WE8MSWIN1252
Opening with internal Resource Manager plan
where NUMA PG = 1, CPUs = 16
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
QMNC started with pid=63, OS id=14896
Fri Apr 12 19:13:34 2013
Completed: alter database open
Fri Apr 12 19:13:34 2013
ALTER SYSTEM disable restricted session;
Fri Apr 12 19:13:35 2013
Errors in file d:\oracle\product\10.2.0\admin\orcl\bdump\orcl_mmon_15320.trc:
ORA-19815: WARNING: db_recovery_file_dest_size of 2147483648 bytes is 99.56% used, and has 9486336 remaining bytes available.
Fri Apr 12 19:13:35 2013
You have following choices to free up space from flash recovery area:
1. Consider changing RMAN RETENTION POLICY. If you are using Data Guard,
then consider changing RMAN ARCHIVELOG DELETION POLICY.
2. Back up files to tertiary device such as tape using RMAN
BACKUP RECOVERY AREA command.
3. Add disk space and increase db_recovery_file_dest_size parameter to
reflect the new space.
4. Delete unnecessary files using RMAN DELETE command. If an operating
system command was used to delete files, then use RMAN CROSSCHECK and
DELETE EXPIRED commands.
Fri Apr 12 19:13:36 2013
Error 12514 received logging on to the standby
Fri Apr 12 19:13:36 2013
Errors in file d:\oracle\product\10.2.0\admin\orcl\bdump\orcl_arc0_18508.trc:
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
FAL[server, ARC0]: Error 12514 creating remote archivelog file 'stdby'
FAL[server, ARC0]: FAL archive failed, see trace file.
Fri Apr 12 19:13:36 2013
Errors in file d:\oracle\product\10.2.0\admin\orcl\bdump\orcl_arc0_18508.trc:
ORA-16055: FAL request rejected
ARCH: FAL archive failed. Archiver continuing
Fri Apr 12 19:19:33 2013
Error 12514 received logging on to the standby
Fri Apr 12 19:19:33 2013
Errors in file d:\oracle\product\10.2.0\admin\orcl\bdump\orcl_arcr_2144.trc:
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
PING[ARCr]: Heartbeat failed to connect to standby 'stdby'. Error is 12514.
Fri Apr 12 19:22:52 2013
PING[ARCr]: Heartbeat failed to connect to standby 'stdby'. Error is 12514.
Fri Apr 12 20:09:34 2013
Error 12514 received logging on to the standby
Fri Apr 12 20:09:34 2013
Errors in file d:\oracle\product\10.2.0\admin\orcl\bdump\orcl_arcr_2144.trc:
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
PING[ARCr]: Heartbeat failed to connect to standby 'stdby'. Error is 12514.
Fri Apr 12 20:13:50 2013
Sat Apr 13 01:54:52 2013
Error 12514 received logging on to the standby
Sat Apr 13 01:54:52 2013
Errors in file d:\oracle\product\10.2.0\admin\orcl\bdump\orcl_arcr_2144.trc:
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
PING[ARCr]: Heartbeat failed to connect to standby 'stdby'. Error is 12514.
Sat Apr 13 12:35:12 2013
Error 12514 received logging on to the standby
Sat Apr 13 12:35:12 2013
Errors in file d:\oracle\product\10.2.0\admin\orcl\bdump\orcl_arcr_2144.trc:
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
PING[ARCr]: Heartbeat failed to connect to standby 'stdby'. Error is 12514.
Sat Apr 13 12:37:01 2013
ALTER SYSTEM SET log_archive_dest_state_2='DEFER' SCOPE=MEMORY;
Sat Apr 13 12:38:23 2013
Unable to allocate flashback log of 1946 blocks from
current recovery area of size 2147483648 bytes.
Current Flashback database retention is less than target
because of insufficient space in the flash recovery area.
Flashback will continue to use available space, but the
size of the flash recovery area must be increased to meet
the Flashback database retention target
Use ALTER SYSTEM SET db_recovery_file_dest_size command
to add space. DO NOT manually remove flashback log files
to create space.
Sat Apr 13 12:38:41 2013
ALTER SYSTEM SET db_recovery_file_dest_size='5G' SCOPE=MEMORY;
Sat Apr 13 12:38:41 2013
db_recovery_file_dest_size of 5120 MB is 39.82% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
Sat Apr 13 15:42:21 2013
ORA-01555 caused by SQL statement below (SQL ID: 2zb70pwz9p06q, Query Duration=1365847941 sec, SCN: 0x0001.b3c0f735):
Sat Apr 13 15:42:21 2013
SELECT * FROM RELATIONAL("ORISSA_TRANSACTION"."SELLER_BIOMETRICS_TBL")
Sat Apr 13 15:48:37 2013
Thread 1 advanced to log sequence 117452 (LGWR switch)
Current log# 10 seq# 117452 mem# 0: G:\ORADATA\REDO10A.LOG
Current log# 10 seq# 117452 mem# 1: H:\ORADATA\REDO10B.LOG
Sat Apr 13 20:31:00 2013
The value (30) of MAXTRANS parameter ignored.
kupprdp: master process DM00 started with pid=31, OS id=16196
to execute - SYS.KUPM$MCP.MAIN('SYS_EXPORT_SCHEMA_30', 'ORISSA_TRANSACTION', 'KUPC$C_1_20130413203100', 'KUPC$S_1_20130413203100', 0);
kupprdp: worker process DW01 started with worker id=1, pid=66, OS id=16200
to execute - SYS.KUPW$WORKER.MAIN('SYS_EXPORT_SCHEMA_30', 'ORISSA_TRANSACTION');
Sun Apr 14 00:00:11 2013
Thread 1 advanced to log sequence 117453 (LGWR switch)
Current log# 8 seq# 117453 mem# 0: G:\ORADATA\REDO08A.LOG
Current log# 8 seq# 117453 mem# 1: H:\ORADATA\REDO08B.LOG
Sun Apr 14 00:00:52 2013
Thread 1 advanced to log sequence 117454 (LGWR switch)
Current log# 9 seq# 117454 mem# 0: G:\ORADATA\REDO09A.LOG
Current log# 9 seq# 117454 mem# 1: H:\ORADATA\REDO09B.LOGlike you show in the alert.log:
PROBLEM
Unable to allocate flashback log of 1946 blocks from
current recovery area of size 2147483648 bytes.
Current Flashback database retention is less than target
because of insufficient space in the flash recovery area.
Flashback will continue to use available space, but the
size of the flash recovery area must be increased to meet
the Flashback database retention target
Use ALTER SYSTEM SET db_recovery_file_dest_size command
to add space. DO NOT manually remove flashback log files
to create space.
SOLUTION
Fri Apr 12 19:12:51 2013
You have following choices to free up space from flash recovery area:
1. Consider changing RMAN RETENTION POLICY. If you are using Data Guard,
then consider changing RMAN ARCHIVELOG DELETION POLICY.
2. Back up files to tertiary device such as tape using RMAN
BACKUP RECOVERY AREA command.
3. Add disk space and increase db_recovery_file_dest_size parameter to
reflect the new space.
4. Delete unnecessary files using RMAN DELETE command. If an operating
system command was used to delete files, then use RMAN CROSSCHECK and
DELETE EXPIRED commands.
************************************************************************choose one and try again. Post if you have more issues. -
Hello,
I've encountered issue during installation of SP1 to SQL Server 2012. After upgrade I'm getting this error in Event Log:
Script level upgrade for database 'master' failed because upgrade step 'msdb110_upgrade.sql' encountered error 537, state 3, severity 16. This is a serious error condition which might interfere with regular operation and the database will be taken offline.
If the error happened during upgrade of the 'master' database, it will prevent the entire SQL Server instance from starting. Examine the previous errorlog entries for errors, take the appropriate corrective actions and re-start the database so that the script
upgrade steps run to completion.
Can someone point me direction how I can fix it? This is a production server and currently only way to make it working is to use T902 flag in SQL Server startup params. I've found some suggestions to check Data path if it exists but it does so this is not
the issue here. Any ideas?
I've found also here
http://www.sqlservercentral.com/Forums/Topic1377073-1550-1.aspx#bm1378279
suggestions for similar issue with SQL Server 2008 which that I should do:
Via ssms:
From msdb:
Delete:
dc_admin role
Dc_operator role
Dc_proxy role
UlitityCMRReader role
UtilityIMRReader role
UtilityIMRWriter role
but for not I didn't tried it yet. This is standalone SQL Server instance.
Any help really appreciated.
RegardsScript returns the same error.
System databases:
1 1 760 -1 10 1048578 0 1 master C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\master.mdf
2 0 12768 -1 10 1048642 0 1 mastlog C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\mastlog.ldf
1 1 1024 -1 10 1048578 0 2 tempdev C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\tempdb.mdf
2 0 64 -1 10 1048642 0 2 templog C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\templog.ldf
1 1 288 -1 128 2 0 3 modeldev C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\model.mdf
2 0 4464 -1 10 1048642 0 3 modellog C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\modellog.ldf
1 1 28936 -1 10 1048578 0 4 MSDBData C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\MSDBData.mdf
2 0 3352 268435456 10 1048642 0 4 MSDBLog C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\MSDBLog.ldf
are all in place where path shows.
Before sending my message I've searched update script for "FROM master.sys.master_files" and I found script which you are showing me. I've made some digging and when I runned:
SELECT physical_name
FROM master.sys.master_files
WHERE (name = N'master')
it returned also path to one my customers database name which has filename set correctly but it's Logical DB name is master and mastlog. I'm running shared hosting company and I allow my customers to restore their DBs from .bak files but I have no idea why
this customers logical name is set to master and mastlog. Probably when I change this names update script will work as it should. On the other hand in my opinion there should be some kind of fail safe mechanism for situations like this one.
EDIT: After changing logical name for DB and log for mentioned DB your script runned fine so probably now when I remove T902 flag and restart my SQL Server update will run correctly. Big thanks for resolving this issue. -
Attempt to fetch logical page (6:78) in database 5 failed.
Hello every one:
I am upgrading to SQL 2005 using sql 2000 datafiles in clustered environment.
I have followd note 799058 hemogenious system copy. However after attaching the database, we are getting the following error message, when running SQL 2005 upgrade tools.
I ran dbcheck on source database there is no issue, However dbcheck is failing in new database. I tried dbcheck with repais fast and dbcheck with data loss, however both attempts have failed with exact same message.
I am not sure how to handle this error.
Please advice.
executeSQL is called with following parameters:
Server: cacgcbcrr518
Login: integrated security
Resultset will not be copied
Ignore errors is false
Append results is false
select (@@microsoftversion / 65536) / 256
executeSQL is called with following parameters:
Server: cacgcbcrr518
Login: integrated security
Resultset will not be copied
Ignore errors is false
Append results is false
select count(*) from master..sysdatabases where name = 'R3T'
executeSQL is called with following parameters:
Server: cacgcbcrr518
Login: integrated security
Resultset will not be copied
Ignore errors is false
Append results is false
select count(*) from R3T..sysusers where name = 'r3t'
executeSQL is called with following parameters:
Server: cacgcbcrr518
Login: integrated security
Resultset will not be copied
Ignore errors is false
Append results is false
select count(*) from master..sysprocesses where dbid = db_id('R3T') and program_name like 'R3%' and uid = (select uid from R3T..sysusers where name = 'r3t')
executeSQL is called with following parameters:
Server: cacgcbcrr518
Login: integrated security
Resultset will not be copied
Ignore errors is false
Append results is false
select (@@microsoftversion / 65536) / 256
executeSQL is called with following parameters:
Server: cacgcbcrr518
Login: integrated security
Resultset will not be copied
Ignore errors is false
Append results is false
DECLARE @n NVARCHAR(4000) DECLARE @ns NVARCHAR(4000) SET @ns = ''
DECLARE c CURSOR FOR
select case when serverproperty('Collation') is NULL then '' else convert(sysname, serverproperty('Collation')) end
union all select case when serverproperty('Edition') is NULL then '' else convert(sysname, serverproperty('Edition')) end
union all select case when serverproperty('InstanceName') is NULL then '' else convert(sysname, serverproperty('InstanceName')) end
union all select case when serverproperty('IsClustered') is NULL then '' else convert(sysname, serverproperty('IsClustered')) end
union all select case when serverproperty('IsFullTextInstalled') is NULL then '' else convert(sysname, serverproperty('IsFullTextInstalled')) end
union all select case when serverproperty('IsIntegratedSecurityOnly') is NULL then '' else convert(sysname, serverproperty('IsIntegratedSecurityOnly')) end
union all select case when serverproperty('IsSingleUser') is NULL then '' else convert(sysname, serverproperty('IsSingleUser')) end
union all select case when serverproperty('IsSyncWithBackup') is NULL then '' else convert(sysname, serverproperty('IsSyncWithBackup')) end
union all select case when serverproperty('MachineName') is NULL then '' else convert(sysname, serverproperty('MachineName')) end
union all select case when serverproperty('NumLicenses') is NULL then '' else convert(sysname, serverproperty('NumLicenses')) end
union all select case when serverproperty('ProcessID') is NULL then '' else convert(sysname, serverproperty('ProcessID')) end
union all select case when serverproperty('ProductVersion') is NULL then '' else convert(sysname, serverproperty('ProductVersion')) end
union all select case when serverproperty('ProductLevel') is NULL then '' else convert(sysname, serverproperty('ProductLevel')) end
union all select case when serverproperty('ServerName') is NULL then '' else convert(sysname, serverproperty('ServerName')) end
union all select case when serverproperty('Release') is NULL then '' else convert(sysname, serverproperty('Release')) end
union all select case when serverproperty('Patch') is NULL then '' else convert(sysname, serverproperty('Patch')) end
union all select case when serverproperty('IsSysAdmin') is NULL then '' else convert(sysname, serverproperty('IsSysAdmin')) end
OPEN c FETCH NEXT FROM c INTO @n
WHILE @@FETCH_STATUS = 0
BEGIN set @ns = @ns + @n + ';' FETCH NEXT FROM c INTO @n END
CLOSE c DEALLOCATE c select @ns
executeSQL is called with following parameters:
Server: cacgcbcrr518
Login: integrated security
Resultset will not be copied
Ignore errors is false
Append results is false
select IS_SRVROLEMEMBER('sysadmin')
executeSQL is called with following parameters:
Server: cacgcbcrr518
Login: integrated security
Resultset will not be copied
Ignore errors is false
Append results is false
select count(*) from master..sysdatabases where name = 'R3T'
executeSQL is called with following parameters:
Server: cacgcbcrr518
Login: integrated security
Resultset will not be copied
Ignore errors is false
Append results is false
select count(*) from R3T..sysusers where name = 'r3t'
executeSQL is called with following parameters:
Server: cacgcbcrr518
Login: integrated security
Resultset will not be copied
Ignore errors is false
Append results is false
select count(*) from R3T..sysusers where name = 'r3t'
executeSQL is called with following parameters:
Server: cacgcbcrr518
Login: integrated security
Resultset will not be copied
Ignore errors is false
Append results is false
use R3T
declare @info nvarchar(2000)
declare @cs nvarchar(100)
declare @tmp nvarchar(200)
declare @rel nvarchar(100)
declare @patch nvarchar(100)
declare @sql nvarchar(2000)
declare schema_cursor cursor for
select name
from dbo.sysusers
where islogin = '1'
open schema_cursor
select @info = ''
fetch next from schema_cursor into @cs
while @@fetch_status = 0
begin
select @info = @info + @cs
select @info = @info + ':'
select @info = @info + cast(count(*) as varchar(20)) from sysobjects where uid = user_id(@cs) and name not in ('dtproperties')
select @info = @info + ':'
select @info = @info + cast(count(*) as varchar(20)) from sysobjects where uid = user_id(@cs) and type = 'U' and name not in ('dtproperties')
if exists(select * from sysobjects where name = 'CVERS' and uid = user_id(@cs) and type = 'U')
begin
select @info = @info + ':1'
select @sql = 'select @rel = RELEASE, @patch = EXTRELEASE from ' + @cs + '.CVERS where COMPONENT = ''SAP_BASIS'''
exec sp_executesql @sql, N'@rel nvarchar(100) output, @patch nvarchar(100) output', @rel output, @patch output
select @info = @info + ':'
select @info = @info + @rel
select @info = @info + ':'
select @info = @info + @patch
end
else select @info = @info + ':0'
if exists(select * from sysobjects where name = 'BC_CVERS' and uid = user_id(@cs) and type = 'U')
begin
select @info = @info + ':1'
end
else select @info = @info + ':0'
select @info = @info + ';'
fetch next from schema_cursor into @cs
end
close schema_cursor
deallocate schema_cursor
select @info
executeSQL is called with following parameters:
Server: cacgcbcrr518
Login: integrated security
Resultset will not be copied
Ignore errors is false
Append results is false
use [R3T] select count(*) from sysobjects where name like 'Y%' and type='P' and uid=user_id('r3t')
executeSQL is called with following parameters:
Server: cacgcbcrr518
Login: integrated security
Resultset will not be copied
Ignore errors is false
Append results is false
select count(*) from R3T..sysusers where name = 'SAPR3TDB'
executeSQL is called with following parameters:
Server: cacgcbcrr518
Login: integrated security
Resultset will not be copied
Ignore errors is false
Append results is false
DECLARE @n NVARCHAR(4000) DECLARE @ns NVARCHAR(4000) SET @ns = ''
DECLARE c CURSOR FOR
select case when serverproperty('Collation') is NULL then '' else convert(sysname, serverproperty('Collation')) end
union all select case when serverproperty('Edition') is NULL then '' else convert(sysname, serverproperty('Edition')) end
union all select case when serverproperty('InstanceName') is NULL then '' else convert(sysname, serverproperty('InstanceName')) end
union all select case when serverproperty('IsClustered') is NULL then '' else convert(sysname, serverproperty('IsClustered')) end
union all select case when serverproperty('IsFullTextInstalled') is NULL then '' else convert(sysname, serverproperty('IsFullTextInstalled')) end
union all select case when serverproperty('IsIntegratedSecurityOnly') is NULL then '' else convert(sysname, serverproperty('IsIntegratedSecurityOnly')) end
union all select case when serverproperty('IsSingleUser') is NULL then '' else convert(sysname, serverproperty('IsSingleUser')) end
union all select case when serverproperty('IsSyncWithBackup') is NULL then '' else convert(sysname, serverproperty('IsSyncWithBackup')) end
union all select case when serverproperty('MachineName') is NULL then '' else convert(sysname, serverproperty('MachineName')) end
union all select case when serverproperty('NumLicenses') is NULL then '' else convert(sysname, serverproperty('NumLicenses')) end
union all select case when serverproperty('ProcessID') is NULL then '' else convert(sysname, serverproperty('ProcessID')) end
union all select case when serverproperty('ProductVersion') is NULL then '' else convert(sysname, serverproperty('ProductVersion')) end
union all select case when serverproperty('ProductLevel') is NULL then '' else convert(sysname, serverproperty('ProductLevel')) end
union all select case when serverproperty('ServerName') is NULL then '' else convert(sysname, serverproperty('ServerName')) end
union all select case when serverproperty('Release') is NULL then '' else convert(sysname, serverproperty('Release')) end
union all select case when serverproperty('Patch') is NULL then '' else convert(sysname, serverproperty('Patch')) end
union all select case when serverproperty('IsSysAdmin') is NULL then '' else convert(sysname, serverproperty('IsSysAdmin')) end
OPEN c FETCH NEXT FROM c INTO @n
WHILE @@FETCH_STATUS = 0
BEGIN set @ns = @ns + @n + ';' FETCH NEXT FROM c INTO @n END
CLOSE c DEALLOCATE c select @ns
executeSQL is called with following parameters:
Server: cacgcbcrr518
Login: integrated security
Resultset will not be copied
Ignore errors is false
Append results is false
select IS_SRVROLEMEMBER('sysadmin')
executeSQL is called with following parameters:
Server: cacgcbcrr518
Login: integrated security
Resultset will not be copied
Ignore errors is false
Append results is false
DECLARE @n NVARCHAR(4000) DECLARE @ns NVARCHAR(4000) SET @ns = ''
DECLARE c CURSOR FOR
select case when serverproperty('Collation') is NULL then '' else convert(sysname, serverproperty('Collation')) end
union all select case when serverproperty('Edition') is NULL then '' else convert(sysname, serverproperty('Edition')) end
union all select case when serverproperty('InstanceName') is NULL then '' else convert(sysname, serverproperty('InstanceName')) end
union all select case when serverproperty('IsClustered') is NULL then '' else convert(sysname, serverproperty('IsClustered')) end
union all select case when serverproperty('IsFullTextInstalled') is NULL then '' else convert(sysname, serverproperty('IsFullTextInstalled')) end
union all select case when serverproperty('IsIntegratedSecurityOnly') is NULL then '' else convert(sysname, serverproperty('IsIntegratedSecurityOnly')) end
union all select case when serverproperty('IsSingleUser') is NULL then '' else convert(sysname, serverproperty('IsSingleUser')) end
union all select case when serverproperty('IsSyncWithBackup') is NULL then '' else convert(sysname, serverproperty('IsSyncWithBackup')) end
union all select case when serverproperty('MachineName') is NULL then '' else convert(sysname, serverproperty('MachineName')) end
union all select case when serverproperty('NumLicenses') is NULL then '' else convert(sysname, serverproperty('NumLicenses')) end
union all select case when serverproperty('ProcessID') is NULL then '' else convert(sysname, serverproperty('ProcessID')) end
union all select case when serverproperty('ProductVersion') is NULL then '' else convert(sysname, serverproperty('ProductVersion')) end
union all select case when serverproperty('ProductLevel') is NULL then '' else convert(sysname, serverproperty('ProductLevel')) end
union all select case when serverproperty('ServerName') is NULL then '' else convert(sysname, serverproperty('ServerName')) end
union all select case when serverproperty('Release') is NULL then '' else convert(sysname, serverproperty('Release')) end
union all select case when serverproperty('Patch') is NULL then '' else convert(sysname, serverproperty('Patch')) end
union all select case when serverproperty('IsSysAdmin') is NULL then '' else convert(sysname, serverproperty('IsSysAdmin')) end
OPEN c FETCH NEXT FROM c INTO @n
WHILE @@FETCH_STATUS = 0
BEGIN set @ns = @ns + @n + ';' FETCH NEXT FROM c INTO @n END
CLOSE c DEALLOCATE c select @ns
executeSQL is called with following parameters:
Server: cacgcbcrr518
Login: integrated security
Resultset will not be copied
Ignore errors is false
Append results is false
select IS_SRVROLEMEMBER('sysadmin')
executeSQL is called with following parameters:
Server: cacgcbcrr518
Login: integrated security
Resultset will not be copied
Ignore errors is false
Append results is false
exec sp_configure 'show advanced options', 1
reconfigure with override
exec sp_configure 'xp_cmdshell', 1
reconfigure with override
executeSQL is called with following parameters:
Server: cacgcbcrr518
Login: integrated security
Resultset will not be copied
Ignore errors is false
Append results is false
exec sp_dbcmptlevel 'R3T', 90
executeSQL is called with following parameters:
Server: cacgcbcrr518
Login: integrated security
Resultset will not be copied
Ignore errors is false
Append results is false
use R3T select count(*) from sysobjects where type = 'P' and uid = user_id('r3t')
executeSQL is called with following parameters:
Server: cacgcbcrr518
Login: integrated security
Resultset will not be copied
Ignore errors is false
Append results is false
use R3T
declare @name sysname
declare allnames cursor for
select name from sysobjects
where type = 'P'
and (name like 'Y%' or name like 'SAP%')
and uid = user_id('r3t')
open allnames
fetch next from allnames into @name
while (@@fetch_status =0)
begin
exec ('drop procedure [r3t].[' + @name + ']')
fetch next from allnames into @name
end
close allnames
deallocate allnames
[Microsoft][ODBC SQL Server Driver][SQL Server]Attempt to fetch logical page (6:78) in database 5 failed. It belongs to allocation unit 71905451171905536 not to 281474979397632.
executeSQL is called with following parameters:
Server: cacgcbcrr518
Login: integrated security
Resultset will not be copied
Ignore errors is false
Append results is false
use R3T select count(*) from sysobjects where type = 'P' and uid = user_id('r3t')
executeSQL is called with following parameters:THIS IS THE SQL ERROR LOGS:
2008-05-28 15:49:20.79 spid21s Starting up database 'R3T'.
2008-05-28 15:49:20.79 spid20s Starting up database 'msdb'.
2008-05-28 15:49:20.82 spid20s 1 transactions rolled forward in database 'msdb' (4). This is an informational message only. No user action is required.
2008-05-28 15:49:20.84 spid20s 0 transactions rolled back in database 'msdb' (4). This is an informational message only. No user action is required.
2008-05-28 15:49:20.84 spid20s Recovery is writing a checkpoint in database 'msdb' (4). This is an informational message only. No user action is required.
2008-05-28 15:49:20.88 spid21s Analysis of database 'R3T' (5) is 100% complete (approximately 0 seconds remain). This is an informational message only. No user action is required.
2008-05-28 15:49:20.90 spid21s 1 transactions rolled forward in database 'R3T' (5). This is an informational message only. No user action is required.
2008-05-28 15:49:21.06 spid21s 0 transactions rolled back in database 'R3T' (5). This is an informational message only. No user action is required.
2008-05-28 15:49:21.06 spid21s Recovery is writing a checkpoint in database 'R3T' (5). This is an informational message only. No user action is required.
2008-05-28 15:49:21.06 spid5s Recovery of any in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC) has completed. This is an informational message only. No user action is required.
2008-05-28 15:49:21.06 spid5s Recovery is complete. This is an informational message only. No user action is required.
2008-05-28 15:49:25.60 spid51 Configuration option 'Agent XPs' changed from 0 to 1. Run the RECONFIGURE statement to install.
2008-05-28 15:49:25.74 spid51 Using 'xpsqlbot.dll' version '2005.90.3042' to execute extended stored procedure 'xp_qv'. This is an informational message only; no user action is required.
2008-05-28 15:49:25.81 spid51 Using 'xpstar90.dll' version '2005.90.3042' to execute extended stored procedure 'xp_instance_regread'. This is an informational message only; no user action is required.
2008-05-28 15:49:25.82 spid51 Using 'xplog70.dll' version '2005.90.3042' to execute extended stored procedure 'xp_msver'. This is an informational message only; no user action is required.
2008-05-28 15:58:29.52 spid53 Setting database option SINGLE_USER to ON for database R3T.
2008-05-28 15:58:29.52 spid53 Setting database option SINGLE_USER to ON for database R3T.
2008-05-28 15:59:15.77 spid53 Error: 605, Severity: 21, State: 3.
2008-05-28 15:59:15.77 spid53 Attempt to fetch logical page (6:72) in database 5 failed. It belongs to allocation unit 71905451171905536 not to 281474979397632.
2008-05-28 15:59:15.78 spid53 DBCC CHECKDB (R3T, repair_fast) WITH all_errormsgs, no_infomsgs executed by sa terminated abnormally due to error state 5. Elapsed time: 0 hours 0 minutes 18 seconds.
2008-05-28 16:02:17.43 spid54 Error: 605, Severity: 21, State: 3.
2008-05-28 16:02:17.43 spid54 Attempt to fetch logical page (6:72) in database 5 failed. It belongs to allocation unit 71905451171905536 not to 281474979397632.
2008-05-28 16:02:17.44 spid54 DBCC CHECKDB (R3T, repair_allow_data_loss) WITH all_errormsgs, no_infomsgs executed by sa terminated abnormally due to error state 5. Elapsed time: 0 hours 0 minutes 10 seconds.
2008-05-28 16:04:53.26 spid54 Setting database option MULTI_USER to ON for database R3T.
2008-05-28 16:04:53.26 spid54 Setting database option MULTI_USER to ON for database R3T.
2008-05-29 00:00:06.31 spid15s This instance of SQL Server has been using a process ID of 2016 since 5/28/2008 3:49:21 PM (local) 5/28/2008 10:49:21 PM (UTC). This is an informational message only; no user action is required.
2008-05-29 09:45:59.67 spid54 Error: 605, Severity: 12, State: 3.
2008-05-29 09:45:59.67 spid54 Attempt to fetch logical page (6:72) in database 6 failed. It belongs to allocation unit 71905451171905536 not to 281474979397632.
2008-05-29 09:45:59.69 spid54 DBCC CHECKDB (R3T) WITH no_infomsgs executed by sa terminated abnormally due to error state 5. Elapsed time: 0 hours 1 minutes 20 seconds. -
Please help: opmn start failed
Hello,
I have the following problem with the opmn:
I have installed Oracle 10g Database in HPUX 11.11 from the disc "Database". It works OK, I can start my database instance "orademo" with dbstart and stop it with dbshut. If it is running, I can connect to it without problems.
Then I have installed Oracle 10g Database Products from the disc "Companion" without problems.
Then I tried to install Oracle 10g Database Companion Products. The installation seemed to proceed OK except of the following two messages: "File not found ...(emca.1.1.jar)" at approx. 76% of the status bar and "Error invoking target 'nmo nmb'..." at approx. 95%. I have clicked on "Continue" in both cases and the installation went up to the screen, "Configuration Assistants". The first of the two actions, OC4J Configuration Assistant, succeeded. The other one, "Starting HTTP Server", failed. Then I have canceled it, performed the root.sh script, and the last screen, "End of Installation" appeared. When I closed this, I could see the following message in the terminal:
Exception : class java.sql.SQLException Io exception: The Network Adapter could not establish the connection
Could not retrive nls_lang from database
Then I tried to start HTTP server manually but I obtained the following error messages:
bash-2.05b$ /export/ora10gcomp/opmn/bin/opmnctl startall
opmnctl: starting opmn and all managed processes...
Pthread internal error: message: __libc_reinit() failed, file: /ux/core/libs/threadslibs/src/common/pthreads/pthread.c, line: 1155
Return Pointer is 0xc003a497
/export/ora10gcomp/opmn/bin/opmnctl[3]: 21149 Quit(coredump)
Pthread internal error: message: __libc_reinit() failed, file: /ux/core/libs/threadslibs/src/common/pthreads/pthread.c, line: 1155
Return Pointer is 0xc003a497
/export/ora10gcomp/opmn/bin/opmnctl[7]: 21150 Quit(coredump)
Pthread internal error: message: __libc_reinit() failed, file: /ux/core/libs/threadslibs/src/common/pthreads/pthread.c, line: 1155
Return Pointer is 0xc003a497
/export/ora10gcomp/opmn/bin/opmnctl[9]: 21152 Quit(coredump)
opmnctl: opmn start failed
bash-2.05b$
Then I checked all Oracle 10g requirements, namely required HPUX patches, unistalled and reinstalled the Oracle 10g Database Companion Products repeatedly, checked the connection to the database by SQL Plus etc. ... but the problem was always the same.
Note: I installed Oracle 10g (including Database Companion Products) also in Windows XP and in Fedora Core 3 and I never encountered a problem like this. Everything runs correctly in these other operating systems.
Would somebody help me?
Thanks in advance!
VaclavHi,
Thanks for the replay. I am doing the installation once again. Now I am not facing OPMN problem.
Now I am facing some another problem. That DBCA fails to create infrastructre metadata respository database. Why it is happening?
regards,
Mat. -
Is there any well designed sample database availabe for download ?
Hi
Thank you for reading my post
I get the Oracle Express 10g and now i am looking for a good database with some test data inside it
to practice some tuning and sql commands.
is there any (rather big ) sample database available for download ?
ThanksHello,
XE ships with the Sample Application that includes the HR schema with some objects to work on. By default, the HR user account is locked so you need to unlock it first. It's usually a good place to start as many current and future documentation based on XE will include examples from this schema.
Przemek -
SQL 2012 Copy Database Wizard fails
I am trying to use the Copy Database Wizard in SQL Server 2012
The host is running SQL Server 2000 (8.00.2066 (SP4)) on a Windows 2003 server
The destination is SQL Server 2012 running on Windows Server 2012 Standard.
Its gets to Execute SQL Server Agent Job and fails with this error:
The job failed. Check the event log on the destination server for details
Fails at – Execute SQL Server Agent Job
I've looked at the application log and not sure which errors are relevant. Here are two of them:
the first is an error, the second a warning.
Log Name: Application
Source: SQLISPackage110
Date: 1/9/2015 11:39:24 AM
Event ID: 12291
Task Category: None
Level: Error
Keywords: Classic
User: NT SERVICE\SQLSERVERAGENT
Computer: SQL2013
Description:
Package "CDW_SQL_SQL2013_7" failed.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="SQLISPackage110" />
<EventID Qualifiers="16385">12291</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-01-09T16:39:24.000000000Z" />
<EventRecordID>456924</EventRecordID>
<Channel>Application</Channel>
<Computer>SQL2013</Computer>
<Security UserID="S-1-5-80-344959196-2060754871-2302487193-2804545603-1466107430" />
</System>
<EventData>
<Data>CDW_SQL_SQL2013_7</Data>
</EventData>
</Event>
Log Name: Application
Source: SQLSERVERAGENT
Date: 1/9/2015 11:39:26 AM
Event ID: 208
Task Category: Job Engine
Level: Warning
Keywords: Classic
User: N/A
Computer: SQL2013
Description:
SQL Server Scheduled Job 'CDW_SQL_SQL2013_7_1' (0xDFA5EEDDB2D53A4FB3C7CED04563896E) - Status: Failed - Invoked on: 2015-01-09 11:39:18 - Message: The job failed. The Job was invoked by User VGBtR3r0WgKjvthk. The last step to run was step 1 (CDW_SQL_SQL2013_7_1_Step).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="SQLSERVERAGENT" />
<EventID Qualifiers="16384">208</EventID>
<Level>3</Level>
<Task>3</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-01-09T16:39:26.000000000Z" />
<EventRecordID>456927</EventRecordID>
<Channel>Application</Channel>
<Computer>SQL2013</Computer>
<Security />
</System>
<EventData>
<Data>CDW_SQL_SQL2013_7_1</Data>
<Data>0xDFA5EEDDB2D53A4FB3C7CED04563896E</Data>
<Data>Failed</Data>
<Data>2015-01-09 11:39:18</Data>
<Data>The job failed. The Job was invoked by User VGBtR3r0WgKjvthk. The last step to run was step 1 (CDW_SQL_SQL2013_7_1_Step).</Data>
</EventData>
</Event>
Any ideas would be appreciated. I'm anxious to retire this old SQL 2000 server!
MikeThanks David.
is this the log you are looking for:
Date 1/9/2015 11:39:18 AM
Log Job History (CDW_SQL_SQL2013_7_1)
Step ID 1
Server SQL2013
Job Name CDW_SQL_SQL2013_7_1
Step Name CDW_SQL_SQL2013_7_1_Step
Duration 00:00:08
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
Executed as user: NT Service\SQLSERVERAGENT. Microsoft (R) SQL Server Execute Package Utility Version 11.0.2100.60 for 64-bit Copyright (C) Microsoft Corporation. All rights reserved. Started: 11:39:18 AM Progress:
2015-01-09 11:39:18.61 Source: sql_SQL2013_Transfer Objects Task Task just started the execution.: 0% complete End Progress Error: 2015-01-09 11:39:24.50 Code: 0x00000000
Source: sql_SQL2013_Transfer Objects Task Description: An error occurred while transferring data. See the inner exception for details. StackTrace: at Microsoft.SqlServer.Management.Smo.Transfer.TransferData()
at Microsoft.SqlServer.Dts.Tasks.TransferObjectsTask.TransferObjectsTask.TransferExtraObjectsViaSmoTransfer() InnerException-->The specified schema name "INFORMATION_SCHEMA" either does not exist or you do not have permission to use it.
StackTrace: at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject
stateObj, Boolean callerHasConnectionLock, Boolean asyncClose) at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject
stateObj, Boolean& dataReady) at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async, Int32 timeout, Boolean asyncWrite) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1
completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at Microsoft.SqlServer.Management.Smo.Transfer.ExecuteStatements(SqlConnection
destinationConnection, IEnumerable`1 statements, SqlTransaction transaction) at Microsoft.SqlServer.Management.Smo.Transfer.TransferData() End Error Progress: 2015-01-09 11:39:24.50 Source: sql_SQL2013_Transfer
Objects Task Database transfer failed for one or more extra objects.: 0% complete End Progress Progress: 2015-01-09 11:39:24.50 Source: sql_SQL2013_Transfer Objects Task
Transfer objects finished execution.: 100% complete End Progress Warning: 2015-01-09 11:39:24.52 Code: 0x80019002 Source: CDW_SQL_SQL2013_7 Description: SSIS Warning
Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change
the MaximumErrorCount or fix the errors. End Warning DTExec: The package execution returned DTSER_FAILURE (1). Started: 11:39:18 AM Finished: 11:39:24 AM Elapsed: 6.062 seconds. The package execution failed.
The step failed.
I will also look into backup/restore. Will that work between 2000 and 2012?
Maybe you are looking for
-
I am using a 4th gen ipad with an epson Xp400 air printer my ipad was able to find printer but now it cannot. Printer says wifi setup ok. Do not understand why it can't find printer. Never did work right away always have to restart ipad or do wifi se
-
CS3 color management won't match prints
Okay, I know there are a lot of boneheds who can't figure out how to set up color in Bridge and CS3 but I am at my wits end on this so bear me out. Windows XP and CS3 Bridge is set to; Enable color management in Bridge RAW conversion is SRGB CS3 colo
-
Creating a simpel network with Lion Server, and add Windows XP computers to it
We have a Mac Lion Server and 3 computers with Windows XP. Previously we had a Windows 2003 server with a domain name: "MYDOMAIN". When logging into Windows it logs into this domain. I would like to replace this Windows 2003 server with my new Mac Li
-
How to restrict from creating the Network for 1st & 2nd level WBS
Hi All, In our project structure we have up to 5 levels of WBS, In some cases we have creates 3 level also . Now we want to restrict creates Network for first two level WBS , actually we want to restrict user to Create PR for those WBS so if we
-
Replenishment from PSA instead of replenishment bin
Hi Everyone The following is the problem There are raw materials which are shared by two or more Production Supply areas (PSA's). So when they try to replenish the system uses Stringent FIFO and suggests that replenishment be done from another PSA bi