Satellite C50-A0113 does not boot into windows

Hello.
I own a toshiba satellite C50-A0113 laptop running windows 8 64bit.
Ive had it for exactly two years a few days ago i restarted it and then when it starts it stops at the "Toshiba leading innovation" screen and then it says scanning and repairing drive C while on that screen it starts the process and then stops at 34%.
that was two days ago now it just gets stuck on the "toshiba leading innovation screen " then after a few minutes it says preparing automatic repair.
It then leaves that screen and goes to a black screen for a few minutes then flashes the blue screen written "your computer encountered a problem" then restarts.
I tried creating a bootable windows 8 disc in order to repair but it doesnt even boot into the usb.
I restart and press f12 in order to select the media to boot into. It checks the media goes to the toshiba screen then just goes black for some minutes untill it restarts.
May i please know what is wrong and how can i possibly fix this because the problem is clearly not my hard drive.
I removed it and put into another laptop and it was fine

Dear aya11,
Defiantly it is a operating system issue.
did you check in the BIOS mode??
if your laptop is working fine in the BIOS mode then you have to reinstall operating system.
if you have preloaded operating system then you can recover your operating system.
recovery option is :*
if you are using window 7 in your laptop then,
just restart your laptop and hold the "0" numeric key..u get option HDD recovery just enter in HDD recovery
then it showing popup for format laptop just click on the yes ..you get a next option and your laptop is getting restart.
if you are using window 8 in your laptop then
just restart your laptop and hold the "F12" numeric key..you get option HDD recovery just enter in HDD recovery
then it showing popup for format laptop just click on the yes ..you get a next option and your laptop is getting restart.
in case both option is not working then u have install a new OS.
Thnx :)

Similar Messages

X102e - Hard drive does not boot into Windows

Hi, I was trying to reinstall Windows on my X120e.
I tried clean install with Windows 7 Professional, but the hard drive does not boot into the Windows once it has done the first phase of the install(you know, the copying part)
After the restart done by Windows, it goes as far as "Starting Windows" but does not actually boot into the Windows.
When I try to install Windows with another HDD, the device works well, but I can't swap the HDD because it is not 7.5mm think HDD.
Is there any possibility the HDD will work trough any software-level process? The HDD works fine as external HDD when tested with external HDD adapter, and installs well. only problem is that it fails to boot
Kim
W540( ), Helix(Sold), Tablet 2(Sold) Tablet 2( ), X120e(Sold), X201 Tablet, X41 Tablet(Sold), X41, X32*4, 701C*4

Thank you for reply.
This is not exactly the issue. I was talking about the HDD originally installed in the PC.
The PC successfully recognizes the external disk I used to install the Windows, but the problem was that I did not boot into the "First boot" screen, which basically works on the already installed data.
As of now I have installed an SSD and is working fine. strange part is that HDD works just fine when I use it as an external HDD via adapter. Strange huh?
Kim
W540( ), Helix(Sold), Tablet 2(Sold) Tablet 2( ), X120e(Sold), X201 Tablet, X41 Tablet(Sold), X41, X32*4, 701C*4

HP g6-1202sa Notebook pc does not boot into Windows

I have a HP pavilion G6 that hangs when it gets past the Windows logo and ends up with a black screen and a live arrow cursor but nothing else happens. I have gone round and round looking at various ways of dealing with it but without success. These include various rescue/boot discs, then going into command prompt to carry out various system commands. These are best described in the article and related threads at the links below:- Re: HP G72-b66US Notebook PC Dosn't Boot into Windowshttp://h30434.www3.hp.com/t5/Notebook-Lockups-Freezes-Hangs/HP-G72-b66US-Notebook-PC-Dosn-t-Boot-into-Windows/m-p/1336579#M22150 AndHow to Recover from an Infinitely Looping Startup Repair Loop without Reinstalling Windowshttp://www.sevenforums.com/tutorials/139576-startup-repair-infinite-loop-recovery.html Operations used include:-- use of Regback on DEFAULT, SAM, SECURITY, SOFTWARE and SYSTEM files- Bootrec.exebcdedit /export C:\BCD_Backupc:cd bootattrib bcd -s -h -rren c:\boot\bcd bcd.oldbootrec /RebuildBcdd
bootrec /fixmbrbootrec /fixboot Some other bits of information: - During the above operations I get the message 'Total identified Windows installations: 0'- I have copied most of the HDD to an external HDD using a SATA link and Testdisk I feel that the fault is probably a very simple fix (in the Boot directory?) but I have not found it yet.I would be grateful of your help please.Dave

my guess it's the hard drive did you ran the hard drive test as well?

Table does not fit into window.

Hi Guys,
When I execute the Smartforms I get this message ? '
"Table does not fit into window." any guess why this message ?
Regards

>
P R Raghu wrote:
> "Table does not fit into window." any guess why this message ?
> Regards
If TABLE does not fit WINDOW try to take it through the DOOR LOL
Doesn't the error seems self explanatory to you?
Regards
Karthik D

Error: Table TEMPLATE_HEADER does not fit into window.

Hello Experts ,
I met a very strange problem.
I am printing a process order using smartform.
for other process nrs , print perfect.
But only for a certain precess nr, I got a popup error 'Table TEMPLATE_HEADER does not fit into window.'
At beginning , I suppose my table line extend the mainwindow width. But infact , no!
I try to comment every node one by one, I found the reason: I put a table line into a loop node, if I add a text node which has something inside, it will triger this error. (only for this process order, others works fine)
so , does someone met this error before ?
Please help me!!
Regards
Kevin

Hi Kevin,
Which printer and device type do you use? For line printers and device type(driver STN2) like e.g. EPESCP9, the SAP system
must use spaces and empty lines to place the text. This is a limitation of the ESC/P printer languagesa per SAP note #19807.
For this, the Smartforms rounds all coordinates(of the table cells and the window). Only after this step it checks, whether the table fits into the window. So if the table size is quite close to the window size size, it may happen on line printers that the table doesn't fit anymore.
If this is the reason for your problem, the error message should vanish if you increase the size of the window containing table TEMPLATE_HEADER a little in your smartform.
Regards,
Aidan

Getting "Table %TEMPLATE does not fit into window" error

Hello,
I am trying to print a form to an old EPSON DFX-9000 dot matrix printer and am getting the error message Table %TEMPLATE does not fit into window".
This only happens when I go to that printer. I can print fine to a laser printer.
I have tried creating a new device type and copying over the format from the laser printer, playing with the format, changing formats, ect.
I have adjusted the size of the window that my template cannot allegedly fit into but still no luck. I have checked the height and width of the template and the window many, many times and still get the same error.
Has anyone seen this before? Please help. Thanks.

Hi James,
You need to see the width and height of the Page Format which you have set in Form Attributes of your smartforms.
What ever you create should be within this width and height .
So accordingly adjust the width and height of your windows and components within them
Regards,
Dep

Satellite L300-135 not booting into windows!

bought it about 2 years ago everything worked perfectly until today where it's even unable to boot into windows vista...I just turn it on when the windows loading bar is loading then it shows blue screen for 0.1 sec and it resets itself... even the safe mode wouldn't start and restore mode (last good known config) couldn't help it to start...i tried using an ubuntu linux live cd to save my datas but couldn't boot either, gave an error stating something as abnormal.
so where's the problem ?
Windows boot manager tried to find the problem and is telling me this:
status: 0xc00000e9
info: An unexpected I/O error has occured.

> so where's the problem ?
Who knows??? Do you think its so easy to say whats exactly wrong without running any tests???
Maybe its just a software issue but a hardware issue (RAM, motherboard, etc..) can be possible too.
As I understood your message, you want to access the data and to backup the necessary files
Well, the Toshiba recovery disk would format the whole HDD therefore you should backup the data before usage of recovery disk.
You could remove the HDD from the notebook and could connect it to another computer using an external USB HDD case.
After backup, you could use the recovery disk to reinstall the Windows.

Satellite L745D-S4214 Does not boot; HDD recovery partition not working

I tried to apply the recent windows 7 updates and my laptop no longer boots. I tried to press F12 and select the HDD Recovery partition, but it does not boot regardless. There is a message that it does not communicate to a specific device. I believe the address called out was 0xc0000e9, but I am going by memory. I never created a recovery CD because I thought I was covered by the HDD partitions. This was purchased on 10/26/2012, so it should still be under warranty.
PLEASE HELP!

Hi I'm going to assume that your recovery works like mine and that the recovery partition is still good and not corrupted.
Shut down your PC. Press F12 and select HDD recovery. Click enter. This should start the recovery from the hidden recovery partition.
PS I would advise you to make the recovery discs or USB recovery Try this first.
Perform a power cycle
Even when your laptop is off and unplugged, residual power can still be held in some components. While this is normal, clearing it can help with boot problems. Perform these steps to complete what’s called a power cycle.
Ensure the laptop is turned off.
Unplug the laptop's AC power cable.
Remove the battery (if the model has a removable battery).
Unplug all wires or peripherals. This includes CDs, DVDs, USB sticks, mice, printers, and any other accessories.
Hold down the power button for thirty seconds.
Reattach the battery.
Connect the AC adaptor to the power socket that was confirmed to be working in the first step.
Connect the other end of the AC adaptor to your computer.
Try starting the computer.
If your laptop starts normally now, you're done!
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.

Satellite M30-107 does not boot correctly after Recovery disk usage

Hi
I've recently got hold of a second hand toshiba Satellite M30-107 laptop, and decided to freshen it up.
I used the toshiba recovery disk, but after doing so the laptop no longer loads windows.
When turned on it shows the Toshiba start up disk for about a second then goes to a blank screen and freezes.
When turned off and on again a screen comes up reporting an error in shutting down and gives the options to start in safe mode etc. but choosing any of the options causes the machine to freeze.
Any help or advice would be much appreciated.
Thanks
jt

Hi
Sounds a little bit like the notebook does not boot due to the Windows software issue
Did you recover the M30 with the original Toshiba recovery CD which was supplied with this M30 unit?
Maybe Im wrong but for me it looks like a wrong recovery CD was used and an image with non compatible drivers was installed
You could try to install the OS from original Microsoft Win XP CD and could check if it would be possible to get the notebook ruining using clean OS.
In such case we ( you and me ;) ) could find out if this issue could be related to the software or hardware.
Bye

Machine will not boot into Windows!!

I formatted a 32 GB partition in NTFS, then successfully installed Windows XP Pro along with Leopard Bootcamp drivers. All was well. And then I tried to restart.
I held the "Option" key until the Mac OS and Windows drives showed. Selected the Windows drive and clicked on the arrow. Nothing happened except for the cursor freezing in position and the drive eventually spinning down. A light touch on the power button shut the machine down.
I have tried selecting the Windows drive as the default startup disc in System Preferences, no dice.
What have I done wrong? What can be done to repair the issue? I need help, wife about to start throwing stuff
All the best,
Chumpy

Odd thing I noticed. When installing the Windows XP Pro, new full installation disc, not repair disc, I had to shut down before installing the Leopard disc and loading Bootcamp and Leopard drivers because I ran out of time. The machine booted right into Windows the next time I tried. Then, after loading Bootcamp and drivers off Leopard disc the machine will not restart into Windows.
I have tried to do it by selecting it as the default drive and by pressing "Option" and selecting the Windows drive. Neither approach does anything. Literally. The optical drive and the harddrive eventually spin down and the machines white screen is frozen.
So, I have redone the partition in Bootcamp Assistant. When I try to boot to the installation disc now, it won't go. For some reason this is just not working at all.
Frustrated,
Chumpy

Satellite P840/016 does not boot from CD or DVD

Using F2 enabled the BIOS to boot from optical drive, saved and re-started. Finds the bootable CD created from the same laptop using the repair disc from Windows 7 recovery but does not boot.
Tried Ubuntu DVD which works as boot disk on all other laptops - still does not boot.
Changed the setting in BIOS to non-secure - same problem.

Thanks - tried this pressing F12. Message appears on the screen to press any key to boot from DVD. Key pressed, the DVD is read and then delay with blank screen. The laptop goes back to start screen and than goes to boot from the HDD. Also tried making USB as bootable. Pressed F12 and selected USB as boot device. Reads the USB and after a period of time boots from HDD.
Checked DVD driver - it is the latest.
Operating system is Windows 8 pro.
RAM is 8GB, processor is I7 and HDD is 1 TB. Laptop is only 3 weeks old

HT4840 Boot camp does not boot to Windows 7 disk after completing disk partition - white blank screen

After completing the partitionning of the hard disk, the iMac reboots but nothing happens. The system does not boot from the Windows 7 disk.
A blank screen appears and that's all.
I have tried to manually boot from the disk by pressing the <Alt> kei will restarting the iMac. The system display the option of booting from the iMac hard disk or the Windows 7 disk. Seelcting the Windows 7 option does noting.
Thanks in helping me find a solution to my boot problem.
Danarc54

Are using a 64 bit version or a 32 bit version of Windows?
I'm not up on the iMacs but according to this article you may not be able to use 64bit Windows.

Re: Satellite C855-1EL does not boot Windows system

I've been having trouble with my Satellite C855-1EL lately and now can't even boot up Windows.
The black screen reads the following:
Intel UNDI, PXE-2.1 (build 083)Copyright (C) 1997-2000 Intel CorporationThis Product is covered by one or more of the following patents:US5,307,459, US5,434,872, US5,732,094, US6,570,884, US 6,115,776 andUS6,327,625
Realtek PCIe FE Family Controller Series v1.24 (10/07/10)
press keys to device ....
and when I formatted I find no hard disk

For successful OS installation HDD must be recognized by BIOS and listed there. If I understand you right HDD is not listed in BIOS settings.
Is this correct?
Try to set BIOS to default settings and check it again. If there is no some hardware related issue HDD must be recognized. In case that HDD is not visible for BIOS your next step could be HDD exchange and test with new HDD inside.
By the same result Im afraid you need professional help. It is possible that HDD controller is defective.

Win 7 Bootcamp does not boot beyond windows splash screen.

I am Running a Windows 7 bootcamp partition which has been running fine for months, untill today when it now just goes to a non responsive blank screen after the Windows splash screen. I am able to boot the win7 os into safe mode successfully, and also have the bootcamp partition set up as a VM, which i am able to boot into successfully in normal mode. Very odd.
I am running an 2.6GHz i7 Retina MBP with 8GB ram and a 512 SSD
Any help/ideas would be appreciated
Cheers
O.

Quote
Originally posted by Syruel
Thank you to everyone who helped me w/my prob. I got an Antec True Power 430--they didn\\\\\\\'t have any of the 550\\\\\\\'s in stock--and now my system is up and running.
Sadly, I still could NOT boot up the existing OS--I still had the same problems mentioned above--can anyone explain that?
But, I was able to install the OS on a blank HD, which worked just fine for some reason--I just have to reinstall everything now--any ideas as to that?
As for the manual and RAM...screw that...Quote
also do you mean 3 gigs of ram total when you say 3x1gig if so your board only supports 2 gig of ram when it is pc2700...
Yes, I mean 3 Gigs total. I read on Soyo\\\\\\\'s website that it\\\\\\\'s MoBo\\\\\\\'s do that and will only support 3 Gigs at 2100, hence me underclocking my RAM at 266 Mhz. It would have been really useful if MSI\\\\\\\'s documentation would have said the same thing. 3 Gigs at 2700 is the reason my system would NOT even POST. Where did you see that it only supports 2 Gigs at 2700?[/COLOR]
That's not unusual that you would have to do a fresh install of your OS to get it running properly. As far as RAM these boards are very sensitive to types of RAM so You may have trouble with your sticks. As far as 3 1 Gig sticks, unless you are doing some very heavy graphics it is probably overkill and you will find better performance with two sticks running in dual mode. Try it and see which way it runs better for you!
Rob

RE: Satellite A135-S2356 will not boot to windows.

Problem 1-1/2 weeks ago-mouse started freezing, the windows sessions started freezing. Then started getting blue screen errors saying I have an uncorrectable hardware error. Tried disk recovery & process completed to restart the said it could not start windows! Now if it happens to boot at all it freezes within a few seconds. Any input at all would be greatly appreciated.
Thanks, TerribleT

Satellite A135-S2356
Now if it happens to boot at all it freezes within a few seconds.
1. Does the problem occur when you boot into Safe Mode? See Advanced startup options (including safe mode).
2. Does the problem occur when you boot normally into another user account? If necessary, create one.
-Jerry

Satellite C50-A0113 does not boot into windows

Similar Messages

Maybe you are looking for