Save image to Adobe CQ5 from IPAD2 by capturing image using PHONEGAP

Hi
I am trying to capture the image in IPAD2 using Phonegap.
Then I am using ajax post request to save this image.
Note:"imagePhoneurl"  is the image url while getting the image from camera.
     "testevent5sdmkc" is the node name
$.ajax({
           type: "POST",
           url: SEFConfig.url+"/SEFForum/events/testevent5sdmkc",
           contentType: "image/pjpeg",
           data: "name=EventDoc"+"&filename="+imagePhoneurl,
           beforeSend : function(req) {                   
           req.setRequestHeader("Authorization", auth);
           success: function(msg){               
           alert('success');
           //$.mobile.changePage("#viewAttendant", "slideup");
           //getUpdatesAndChangePage(deviceChecked);
           error: function(err)
           alert("Error while getting info from CQ5 : " + err);
So it should create a child node under "testevent5sdmkc" and should have the image that is being passed in POST request.

Hi Rajnegi,
In my opinion, this thread is related to ASP.NET forum. So please post thread on that forum for more effective response. Thank you for understanding. Please refer to the following link.
http://forums.asp.net/.
To save your time, the following way is a popular way to upload images to server. You can put the code in your iframe. Please see the page below:
http://www.aspsnippets.com/Articles/Multiple-File-Uploads-Gmail-Style-using-JQuery-and-ASP.Net.aspx.
Hope useful.
Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

  • No audio from ipad2 to TV when using HDMI

    No audio from ipad2 to TV when using HDMI

    Hi
    I'm having exactly the same problem.
    I have 2009 macpro
    I worked out I can get visual from HDMI 3 and no picture.
    Sound comes though PC1
    Did you fix the problems?

  • When opening an image in Adobe Camera Raw in CC, the image is solid red

    The image is solid red and not my image. I have been working on an image and several layers of work done on things like white balance, color cast.  When I add a CAL I cant get to ACR at all. If im on the previous CAL I can open in ACR but with the red image.   I am on a Mac 10.8.5 Have the latest version of CC installed. Help!
    An hour later I went back and on a copy of my Background layer, I opened the image in ACR.  So what are the parameters of ACR that I don't understand?

    You can't do that in ACR, but you can if you open it in Photoshop and use the crop tool there.
    Gene
    (If this answers your question, mark it correct.)

  • How do I open a web page in Adobe Reader from ipad2?  I don't see any buttons to click. I'm new user

    How do I open  a web page in Adobe Reader? I got the app for ipad2, but when a page says I need a certain version of AR, I don't know what to do. I'm a new user and don't know if I have to "open" AR and it automatically reads whatever doc I have up on the web, or is it always running and any web page I'm on should show a button to click in order to open the page in AR?

    If a website says that you need a certain version of Adobe Reader, it is probably attempting to detect whether or not you have the Adobe Reader browser plugin installed. This is something that only works on desktop systems where browser plugins exist. Since browser plugins don't exist on mobile, website developers should take care to present different messages and provide different options for downloading PDF's when visited by mobile browsers. I recommend contacting the website owner and requesting that they implement access for mobile devices.

  • Set DPI from AIR'S Capturing Image.

    Hi,
    When i capture Bitmap and saved using JPEGEncoder / PNGEncoder  i get image's dpi is 96 ( may be it's depend's on hardware resolutions any my pc have max of this).
    But i want to to set this dpi so in output image's as userdefined.
    Like this facility is available in photoshop so we can set dpi and size so in same size we get different dpi's image's.
    Is any body help me to solve out this issue.
    Thanks,
    Mohit.

    in order to modify the output DPI you will need to get the as3corelib-.93 (just google "as3corelib-.93")
    in there you will find the class JPGEncoder.as
    you then need to modify these lines from
       writeByte(0); // = "JFIF",'\0'
       writeByte(1); // versionhi
       writeByte(1); // versionlo
       writeByte(0); // xyunits
       writeWord(1); // xdensity
       writeWord(1); // ydensity
       writeByte(0); // thumbnwidth
       writeByte(0); // thumbnheight
    to
    writeByte(0); // = "JFIF",'\0'
       //writeByte(2)
       //trace("writing the JFIF 2")
       writeByte(1); // versionhi
       writeByte(1); // versionlo
       //writeByte(0); // xyunits
       writeByte(1); // xyunits
       //writeWord(1); // xdensity
       //writeWord(1); // ydensity
       writeWord(outputImageDPI); // xdensity
       writeWord(outputImageDPI); // ydensity
       writeByte(0); // thumbnwidth
       writeByte(0); // thumbnheight
    where outputImageDPI  is a variable that you pass in.
    To see a working version of this (and shamelessly plug all my hard work)  to to http://nikkosart.com//nikkoImage/testDrive.cfm

  • Dynamic Images in adobe

    Hello All,
    I have a requirement for dynamic images on Adobe form.
    I have some images stored on portal server in a afolder called images which gets upadeted every hour . I have developed a java webservice which can get this images from the portal server.
    The reponse of the webservice is like " http://<Hostname>:<portnumner>/images/abc.png". I have impoted this webservice as Adaptive webservice model in WD.
    I have executed this webservice in WD and binded the response to IFRAME UI element and I am able to images(http://<Hostname>:<portnumner>/images/abc.png).
    Now I want these images to be on the PDF.
    I have installed and configurred  ADS and binded the Webservice response as Datasource to the intercative form. I am able to see the datasourcse in the data view of the interactive form.
    Now when I bind the response to the Image Field UI element I am unable to see the image.
    Please let me know if anyone has any idea on this.
    Thanks,

    Hi Naresh,
    It's an issue with ADS. Exactly not an issue but a requirement. The server on which images are available, has to be exposed to ADS.
    Your Admin might help you on that.
    Regards,
    SV.

  • When you save an image, your captured image is bec...

    I realize that when I take a picture picture from my 5800, ALL my saved images become foggy! According to preview (capture) image, preview images are NORMAL!... So I think the problem is about software based, not hardware!  I have V20 firmware .... I hope Nokia may interest about this problem!...Will upcoming 5800's firmware solve this problem?...
    Thanks.
    Nokia 5800 XpressMusic
    v20.0.012

    It always is to start with. Keep the image displayed for a few seconds and while it's up on the screen, the phone will render a sharper version and display it eventually.
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • I can`t connect to echolink from Ipad2 to Ipad2,however I can connect to a pc

    I can`t connect from Ipad2 to I pad2 using echolink,however I can connect to anoher PC.

    Lots of viewers but no replies.Guess no one knows the answer.

  • WDS Capture Image Failing to Load

    Using the instructions posted here:http://social.technet.microsoft.com/wiki/contents/articles/11680.creating-a-capture-image-in-wds.aspx I created a capture image and then injected network drivers into the boot image. When trying to load the capture image
    I get the error:
    Status: 0x000000f Info: The boot selection failed because a required device is inaccessible.
    Does anyone know what might cause this or how to resolve this issue?

    Hi,
    First test to add/remove any mass storage drivers when capture the image.
    Also the error could relate to BCD corrupt. Check BCD entry to see if it is correct. You could try following 3 commands:
    a.  bcdedit /set {default} device partition=c:  
    b.  bcdedit /set {default} osdevice partition=c:  
    c.  bcdedit /set {bootmgr} device partition=c: 
    TechNet Subscriber Support in forum |If you have any feedback on our support, please contact [email protected]

  • How can I delete ONLY the GPS coordinates from my Hi Res images WITHOUT "Save four Web" or Lightroom

    Hello,
    I take hi res pics of rare wildlife and plants with both my Camera's and iPhone's GPS deliberately ENABLED. Use the photos and their GPS coordinates to document and plot my sightings with dates on maps. CANNOT disclose those locations to others. I do want to keep the metadata in my pics to the very end.
    Use Photohop Extended CS 6 MAC. Save files as hi res TIFF or PSD and sometimes e-mail/upload my pics to the web when I'm done.
    I CANNOT use "Save for Web" to delete my metadata — I don't want the jpeg's lossy compression. Need to preserve color profiles.
    Don't have Lightroom.
    How do use Photoshop to remove ONLY the GPS coordinates from my hi res images EXIF data??? Want to keep other EXIF data.
    Surely Adobe can provide this life-saving service?
    Thanks

    Yep, as others mentioned, just use Bridge and delete the entries there.  You can select a whole batch of files and do them all at once.

  • How to stop Adobe Reader 9 from printing in mirror image on my Mac?

    How can I stop Adobe 9 Reader from printing in mirror image on my Mac?

    How can I stop Adobe 9 Reader from printing in mirror image on my Mac?

  • My time machine does not want to save any more the data from my powerbook 13" Snow Leopard; i get the message "Time Machine could not suppress the disk image of saving "Volumes/Time Capsule Disk/PowerBook _2011_03_21_123627 sparsebundle" What should I do?

    My time machine does not want to save any more the data from my powerbook 13" Snow Leopard; i get the message "Time Machine could not suppress the disk image of saving "Volumes/Time Capsule Disk/PowerBook _2011_03_21_123627 sparsebundle" What is the problem? What should I do?
    Thanks !!
    Alain

    Could that read " . . . could not access . . ."?  If so, try repairing your backups, per #A5 in Time Machine - Troubleshooting.
    If not, or if that doesn't help, see #A1 there. Use the TM Buddy widget it details to copy and post the messages here.

  • Fetching a image in the adobe form from sap server/appliaction layer

    hi all,
    i want to fetch a logo/image from the application layer/ sap server, so that everyone can use it in adobe form. i have already upload the image using SE78.
    I try to add the image into library, it works. But the problem is that, only from my login i can access that image, other can't. I want that image to be shared by everybudy like we use in smartform.
    But i want to fetch that image from SAP server/application layer.
    plzz help me out...
    and tell me the steps for fetching the image from sap server/application layer into the adobe form layout.

    Hi rahul,
    I too have the same requirement. Can you please tell me the steps.

  • How to save 4 artboards as 1 JPG image in Adobe Illustrator?

    I am doing an online class for fundamentals of design.
    I had to create 4 different designs, so I did this by doing them on 4 different artboards.
    I need to save my work for "web and devices..." as a JPG image in Adobe Illustrator (this i can do). But I want to save this assignment as 1 JPG image with all four artboards showing on one image.
    Can anyone tell me how to do this step by step.
    Thanks so much!!!
    Oh I am using Adobe Illustrator CS5.1

    Make a new artboard by selecting the Artboard tool and shift-click where you want it to start, then drag it out to cover all four of the images.

  • Image moves when printed from SAP queue versus Adobe Reader.

    I've got a form with a image embedded into it that serves as a background watermark.
    This document is usually printed from Adobe Reader, however some users have requested the ability to print directly to a SAP printer without using Adobe Reader to print using windows drivers.
    When the form is sent to a SAP printer the image watermark is for some reason moved about 3mm to the right which causes the watermark not to align with the Text Fields that also print on the form.  The text fields do not move, they print in exactly the same spot with either print method.  Only the image seems to be affected.
    Has anyone run into this?  The image is an embeded .png file that is set to Scale Image Poportionally in the sizing options.
    Thanks for any input!

    Thank you for your replies.
    I looked at the notes you suggested and it does seem related to the extra margin added to documents printed to PCL-5.
    If I use LiveCycle to set an image field .5mm from the left edge of the page, and then print it from SAP directly and then from Adobe Reader I see two different things.
    Adobe Reader (with page scaling option turned off) will simply omit anything that falls outside the printable range. 
    SAP  will move the omitted content into the printable area.  This is what is causing my image watermark not to align properly with the text in front of it.  The image field was too close to the left margin and so in the process of printing, SAP has moved it over to fit in the printable area.
    It seems I can fix this issue for my particular requirement by creating a new image field that has the extra white space removed so that I can keep the image field farther away from the left edge of the page.
    Not sure if there is some way to change the way the drivers for device type HPLJ4 are handling these margins, but it will likely just be easier to change the images to move them further from the edge which seems to fix it.
    Edited by: Clay Robinson on Feb 15, 2011 9:59 PM

Maybe you are looking for

  • Ipod playlists not showing, yet music remains on ipod

    my 160gb ipod classic all of a sudden says no music no playlists no videos etc after a reboot of my imac restarted after installing updates while ipod was left on dock connected to computer. i can see the music on the ipod using ipod access and play

  • Purchase order Text and Basic data text needed from MM03 tcode

    Hi I need Purchase order text and Basic data text to be fetched by material number. Purchase order text and Basic data text are present in MM03 Tcode. Can anyone please guide me how to do it. Kind Regards Sajid

  • DVDSP preset question with batch processing.

    I hope someone can help. When I drag my files that I want to batch process, where I can choose the output, for example DVD HD, etc. These presets have different times with them for video, like 120, 190, or even 30. My question is, what is the differe

  • Adobe Reader: file conversion

    I've purchased the Adobe subcription service to convert PDF files into word. When I click on the "convert" button,  it keeps  bringing me to the "Subsciption" site, and won't convert the file. How can I perform  this function?

  • Is there any way to pass value from one SWF to another ?

    I am doing project using flash, now I cant pass a value from one SWF to another, is there any way to pass value from one SWF to another. thanks