Saving netConnection and netGroup connection between pages.

Is it possible to save a connection to Stratus between pages somehow?
For example i have layout on my website, where my Stratus based app is located on all pages.
When user is walking along the pages of my website Stratus app should reconnect on each page, which is not good i must admit, because it takes time to gather all information about the group clients again, reconnect to some stream maybe and so on.

It's interesting solution. I'll try it tomorrow.
But would be really awesome if Adobe could create such storage in Flash Player.
Which could keep connections alive and all gathered data about group(s) as well.
It's an interesting idea and it will reduce connections made to Stratus.
Maybe some of Adobe officials will answer if there are any future plans on that feature.
Any solutions will be welcomed here as well.

Similar Messages

  • Sharing display and internet connection between a 13inch Mac Book and G4

    Does anyone know whether it is possible to connect a Mac Book and a G4 Powermac with an ethernet cable and then hook them both up to the same display and ethernet internet connection?

    Usually you use a router to share an internet connection and to make a local network between the computers over Ethernet or WiFi. I think it is possible to directly connect the computers without a router, but you might have to use a cross-over cable, I'm not sure how to set up a direct connection. Using a wireless router with wired ports would allow you the flexibility of using the MacBook wirelessly and the PowerMac with a wired connection. I have an Apple Airport Extreme Base Station, and it was pretty easy to set up, it plugs into my cable modem to share the internet connection.
    They make hardware devices that allow you to share a docking station between more than one computer, called a KVM switch, so you can have one keyboard, video display, and mouse and switch between two active computers.
    Alternately, using the network connection, you can use Chicken of the VNC, which is a virtual network computer, this opens a window, or full-screen mode, of a computer so you can operate it from another computer.
    http://sourceforge.net/projects/cotvnc/
    You can also control a PC from the Mac using Microsoft Remote Desktop Connection.
    http://www.microsoft.com/mac/otherproducts/otherproducts.aspx?pid=remotedesktopc lient
    Some monitors have multiple inputs, so you wouldn't need to use a KVM switch, if for example your monitor has both DVI and VGA inputs, the front panel can select the source, so you could use a DVI adapter for the MacBook and a VGA for the PowerMac. You could still use the KM portion of a KVM switch if you wanted to use a single full-size keyboard and mouse with both computers.
    http://iogear.com/main.php?loc=product&Item=GCS632U

  • Printer and Network connection between imac and PC (Wireless)

    Hi All
    I Have connected successfully to the internet via my imac through airport as has my pc through a wireless network card. But my problem is sharing files, networking between the two computers, it doesn't want to happen!!
    And i am unable to print through the imac, the printer is linked up to the PC via a USB. The imac and PC are both connected to a wireless router/modem.
    Would like some advise on these issues. Any suggestions welcome!
    Cheers.

    Everything I know about a mixed Mac/PC network, I learned from iFelix and Joel Shoemaker. They both have fabulous sites that go through the process step-by-painful-step.
    As far as the printer sharing goes, it took me a while to get it right, but I ended up using both the files found here and got it to work. Of course it was an HP printer, but there are others located here for other brand printers.
    Good luck and let us know how things turn out.

  • We reset our wireless router and lost connection between our MacBook and our J4680 wireless HP print

    I have tried to reconfigure, have deleted and re-added the printer, locked the print/fax preferences, and still are unable to get the printer to respond to a print order. When I re-added last time and configured, a test sheet was successfully generated, but still the print page states that the printer in not properly configured

    From the front of the printer: Setup > Wireless > Restore defaults.
    From the same Wireless menu, run the Wireless Setup Wizard.
    Now, on your Mac reset the printing system:
    - Go to System Preferences > Print & Scan
    - Right (or control) click in the rectangle listing your printers and select Reset Printing System.
    WARNING - this will delete ALL of your printers!
    - Select the plus sign to re-add a printer. Select the Defualt tab on the top of the window. Look for the printer, select it and wait until the "Add" button becomes available. Click it.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Portal eventing between pages

    Hi,
    I read around that portal eventing can be done only on the same page and not between pages, is this correct? if so, how do we make events between pages after all?
    Thanks in advance,
    Aviad

    Hi Aviad,
    Portal eventing takes place between different iviews of the same page only.
    To pass between values between different pages, you can store the required value in a Portal Request object or Session object.
    Also you can refer to this link,
    iView to iView communication with EPCF
    This link  contains the code to establish connection between pages .Finally obtaining paramaters through request.getParamater().
    Hope this helps,
    Regards
    Uma.
    Note: It will be better from next time if you could post portal related queries in the EP forum to get quicker responses and ep related guidances.

  • Storing username and passwords in web pages on safari

    Hi folks
    I am using an iPad 1 and wish to change my previous decisions regarding saving usernames and passwords for web pages within the safari browser.
    I guess I have hit the "do not save" or similar option at some stage and I now wish to recall the username and password in future.
    Any help would be really appreciated

    Make sure that Settings > Safari  > AutoFill > Names And Passwords is set 'on'. To be able to store them for sites that you've previously said 'no' to you may also need to clear Safari's history and cache : Settings > Safari > Clear Cache (and Clear History). And possibly clear cookies : Settings > Safari > Clear Cookies

  • (Trouble printing) Trouble with connection between Macbook Pro and Hp Deskjet 1510.

    Trouble with connection between Macbook Pro and Hp Deskjet 1510. (Nothing Prints).
    I have a Macbook Pro and am having difficulty printing documents from ‘Pages' from my Hp Deskjet 1510. I have installed the necessary software for the printer and it is connected via USB. Every time I try to print the printer icon comes up as it should, 'printing' and then 'job completed' and then the icon disappears. (Nothing is printed.) I thought it might be something to do with Pages compatibility with the printer but exporting the document to Word or making it a PDF doesn’t change anything. I don’t have Microsoft Word on my computer. The scanner does work and when I printed a ‘Test Page’ that worked too.
    Let me know if you know why this is happening.

    With these settings the network now works flawlessly, however, when i have my ethernet cable plugged in, my internet access via my airport card(on the macbook pro) is no longer available. Hoping you can tell me why this would be with this info i've provided.
    Educated guess. The networking devices have priorities as to which are used. The standard order is that Ethernet has a higher priority than Airport.
    While your Ethernet is unplugged it is inactive and the Mac ignores it. Once you plug it in, the Mac sees that it is active and switches traffic to that interface.
    I actually take advantage of this feature at home, but configuring my Airport and Ethernet with identical fixed IP addresses. Normally I'll use Airport, but if I'm copying a huge file and I want faster performance, I'll just walk my MacBook (previously iBook, previously Powerbook) over to my Ethernet switch and plug in my MacBook. Magically, the Mac detects that the Ethernet is active and continues the file transfer uninterrupted over the faster 100baseT Ethernet connection. When the transfer is finished, or if I really need to move back to the Comfy Chair, I unplug the Ethernet cable, and all activity reverts back to the Airport, all without disrupting any existing networking connections.
    You on the other hand have totally different settings for your Ethernet and your Airport, so when you switch to Ethernet, you basically loose your Airport connections.
    Something you can try:
    System Preferences -> Network
    Gear icon on the bottom left, next to the [+] [-] icons.
    Select *Set Service Order...*
    Now Drag the network interfaces into the perfer priority order you want. In this case put Airport above Ethernet.
    NOTE: You may want to create a new Network Location for this, instead of messing with your normal home Location (which is most likely the default Automatic. That way you have your original you can always fall back to.

  • Connection between CRM back end and ASP front end website for Ecommerce

    Hi All,
    I want to establish the connection between a ASP website and CRM back end server(we are replacing th existing ERP back end system with SAP CRM ).
    I want to know whether I have to go with XI or any other connectors provided by SAP to establsih the communication between the existing ASP website and CRM back end server..
    Can anyone please help me out.
    Thank you,

    Okay here is the general concept for your scenario:
    -You will call standard/custom RFC's(could be BAPI's) in the CRM system from the existing application. 
    -You will need to write a new model layer in your ASP application that calls the RFC layer in CRM
    -You decide what data you want to use from CRM in your application
    Let's assume at minimum you will want to use the product master, business partner master, and business transactions.  You will need RFC's/BAPI's for every interaction point where you will consume/publish data to CRM.
    So when an user creates an order from your e-commerce site, you will need to support saving an order in CRM.  This is example of how you need to map out each function in your existing site to a part of the CRM system.  Since we don't know what your site currently does, this is something you would have to do.
    Once you have mapped out the business level data to the CRM system, then you can evaluate where you will need a BAPI and/or RFC call.  Once that is done, then you can look at the CRM system and see what standard pieces can be called.  Then everything else is custom development.  Your ASP application will call CRM via RFC. 
    It is possible to do what you want to do, but it is going to require a lot mapping work and a fair amount of development effort to integrate the two pieces.  I don't know if you might be better off looking at the SAP Internet Sales Solution instead so you could focus only customizing that application, instead of worrying about an integration problem.  It just depends on how much special functionality your existing e-commerce site has today.
    My general recommendation would be for you to hire a consultant that has done an SAP e-commerce project using SAP CRM in the past and let them guide you on the implementation issues.  An on-site resource could better answer your "high-level" questions.
    However if you have more questions please ask and I will try to answer to the best of my knowledge.
    Good luck,
    Stephen

  • Can't establish wireless connection between the printer and computer.

    I recently upgraded my wireless to an Apple AirPort Time Capsule. I'm able to set up the printer via USB cable. And I'm able to set up the printer on the network via the Airport WPA utility. However I cannot establish a wireless connection between the computer and the printer. When I go to the printers window  in my system prefereces, there is no wireless printer available to add in the "available printers" menu. Only the USB version printer is listed and of course when I disconnect the USB cable it shows as offline.I've tried all the fixes on HP's support pages. I've tried reinstalling the printer on both the router and the computer numerous times. The only thing I haven't done is reinstall the printer using the "Install Wizard" software that is supposed to come with the printer - (mine never came with it in the first place and of course HP doesn't have it available for download). And when I reset the printer to factory settings, then connect it to the computer via the USB, there is no installation software that pops up. Cant even find the **bleep** thing in "Finder". (I'm assuming that it should show up as some sort of external device.) I've checked to make sure both computer and printer are on the same network. (sometimes my computer will grab a connection with the next nearest network.) I've checked all the settings for the printer via the HTML configuration utility. I've even updated my Macbook software and restarted it multiple times. Note: the printer actually worked for a bit when I first switched routers, but the printer's wireless function went offline several times and then quit  altogether. Really frustrated that I bought another HP product thinking this time things would be different. HP is no help unless you want to pay $$ for a phone call. I'm about ready to take this thing out in the desert to use for target practice and never buy another HP product ever again.

    Hi , I saw your post regarding the problems you are having with your LaserJet Pro P1102w Printer not showing on your Macintosh computer. I may have found some resources for you. 
    I have a few questions for you, so I can offer some additional assistance:Before you upgraded to the Apple AirPort Time Capsule, was the printer working wirelessly without any issues?
    When you say; 'I reset the printer to factory settings', how where you trying to do this? 
    I found some instructions from this post: How do I reset my Laserjet p1102w to its defaults, copied here for you:
    To restore the printer back to factory settings, turn the printer off, hold down the wireless button and the cancel button (x button) then turn the printer back on and don't release the two buttons until the printer stops making noise. (When they say turn the printer off, I think they mean unplug the power cable.)
    "I've checked to make sure both computer and printer are on the same network."  Do you know if you are able to access the printers Embedded Web Server (EWS)?To access the EWS - Make sure that the Ready light () is on and that the printer is idle and silent.Press and hold the Cancel button (), and release it when the Ready light () begins blinking.The configuration page prints.Type the IP address or host name of the product in the address field of a supported Web browser, and then press Enter on your keyboardLet me know if this page loads 
    To answer a few more items you have listed:... When I go to the printers window in my system preferences, there is no wireless printer available to add in the "available printers" menu.This could be an issue with your print system, I recommend resetting the printing system and then Repair Disk Permissions - after that try to add the printer again.
    ... the "Install Wizard" software that is supposed to come with the printer - (mine never came with it in the first place and of course HP doesn't have it available for download)HP provides their software/drivers to Apple to be released through your Apple software updates. You can review this document on how to Install a Mac Printer Driver Using Apple Software Update. Which leads into your next point...
    ... there is no installation software that pops upWhen you connect the USB cable your mac may still recognize the printer software as being already installed - check for apple updatesOn the Mac, click the Apple menu (), and then click Software Update, or click About this Mac, and then click Software Update. A list of available updates displays.
    ... Not seeing the printer in "Finder" From what I understand most printers will not show in Finder unless you install a memory card into a supported port on certain printer models, only then will it read it like an external device. A few more things you can check are that the new settings in the Apple AirPort Time Capsule are setup to allow the printer to communicate. There are several of these settings listed in this document; Tips and Workarounds for Common Wireless Network Printer Issues.  HP regularly releases firmware updates that may also correct the problem you are experiencing. You can click on this link to Getting Printer Updates for HP LaserJet Pro P1102w Printer.  I did find 2 more documents that may offer some additional information as well;HP LaserJet Pro P1102w Printer - Connecting the Printer After Changing Your Wireless NetworkAn 'Unable to Find Printer' Error Displays for the HP LaserJet Pro P1102w Printer  Please let me know if any of these steps resolved your issue, or the details of what happened.  I look forward to hearing from you, hopefully with good news!   Thanks, 

  • Frustration! I have all igoods in order to use all, fully as should be. But looks like Softbank does no agree with any connection between iPhone and iMac... What in the world! How Apple let that happen???

    I live in Japan,
    I have all igoods in order to use all, fully as should be. But looks like Softbank does no agree with any connection between iPhone and iMac... What in the world! How Apple let that happen??

    Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
    *Firefox > Preferences > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
    See also:
    *http://kb.mozillazine.org/Images_or_animations_do_not_load
    *https://support.mozilla.org/kb/Images+or+animations+do+not+show

  • No connection between EIS Server and EIS Console

    Hi AllWhile saving a meta model I get this error message:"There is currently no connection between the console and intgeration server. Ensure the server is running and try reconnecting"I have checked properly that EIS server is installed and also running, but don't know why throwing this errors...I am unable to save the metamodel....any suggestions ?Thanks in advance !

    Any Help on this please!!!

  • Errror in RFC connection between SCM ABAP stack and JAVA Stack

    Hi All
    we have installed SCM Abap stack and SCM java stack on same system within single database.when i create rfc connection AI_RUNTIME_JCOSERVER from SCM Java stack to SCM Abap Stack its working fine,but when i am configuring same from SCM Abap to SCM Java using SM59 its giving error.
    Error Details     Error when opening an RFC connection
    Error Details     ERROR: failed to open file G:\usr\sap\SCD\DVEBMGS00\data\sideinfo.DAT
    Error Details     LOCATION: SAP-Gateway on host OPS20SCD1.Octal.pet / sapgw00
    Error Details     CALL: fopen
    Error Details     COMPONENT: SAP-GW-LIB (ReadSideInfo)
    Error Details     COUNTER: 1854
    Error Details     ERROR NUMBER: 2
    Error Details     ERROR TEXT: ENOENT: No such file or directory OR: The system cannot find the fi*
    Error Details     MODULE: gwxxside.c
    Error Details     LINE: 274
    Error Details     RETURN CODE: 451
    Error Details     SUBRC: 0
    Error Details     RELEASE: 701
    Is it compulsory to create RFC connection between abap and java installed on the same system.
    plese suggest.
    Regards

    to configure acceptance of the ABAP (integrated ITS / WebGUI) saplogonticket on the java stack, just log into the java stack (http://FQDN:50xxx/nwa) and select configuration  THe last item in the list is Trusted System... click.
    on the ensuing page, click on the add trusted system button --> by querying trusted sytem.
    Enter the required data on the page:
    system type: ABAP
    host name: FQDN
    System Nr: your instance number
    client (of the productive client)
    and a username and pw with superuser priveliges in the system (SAP_ALL/SAP_NEW, etc).
    the click next
    On the final screen, click finish.
    You have now SSO setup between the ABAP and Java stacks. To configure SSO to accept java saplogontickets on ABAP see:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2b0310d6-0801-0010-3185-b2371a280372
    This should resolve your question.

  • Interface connection between BW and R/3

    hi guys,
    I have installed BW and R/3 , i have to give RFC connection between these two. I dont know ,plz any one can tell me step by step, so i can fix it.
    reward points.

    hi konda,
    refer to this link for a step by step guide of best practices:
    http://help.sap.com/bp_biv270/html/BW/I08_EN_DE.htm
    on this page, click on the BI connectivity link in the building blocks. This doc will give u a detailed step by step approach for your problem.
    hope it helps...

  • How to make HTTP connection between a midlet and a php server?

    As the title above, can anyone share how to make a HTTP connection between those 2? J2ME and PHP. Thanks a lot!

    Can you be a little more specific on what you really want.
    When i started doing j2me application, i was required to be able to comunicate to a oracle client database, and my first though was using PHP based pages to comunicate and do the query. Later they would just generate the answer and get it on the cellphone. You can communicate with a PHP server via either GET or POST. I'd choose POST as is more secure IMO.
    Here are quite a good ammount of examples of how you can do it
    http://www.java2s.com/Code/Java/J2ME/Networks.htm
    They aren't PHP based examples, but you have can an idea of how it can be done

  • Three finger or two finger gesture to move back and forward between pages of file only work on safari, unlike with old os. this new lion won't let me do it. Any help?

    three finger or two finger gesture to move back and forward between pages of file only work on safari, unlike with old os. this new lion won't let me do it. Any help?

    I have decided to dedicate this thread to the wonderful errors of Lion OSX. Each time I find a huge problem with Lion I will make note of it here.
    Today I discovered a new treasure of doggie poop in Lion. No Save As......
    I repeat. No Save As. In text editor I couldn't save the file with a new extension. I finally accomplished this oh so majorly difficult task (because we all know how difficult it should be to save a file with a new extension) by pressing duplicate and then saving a copy of the file with a new extension. Yet then I had to delete the first copy and send it to trash. And of course then I have to secure empty trash because if I have to do this the rest of my mac's life I will be taking up a quarter of percentage of space with duplicate files. So this is the real reason they got rid of Save As: so that it would garble up some extra GB on the ole hard disk.
    So about 20 minutes of my time were wasted while doing my homework and studying for an exam because I had to look up "how to save a file with a new extension in  mac Lion" and then wasted time sitting here and ranting on this forum until someone over at Apple wakes up from their OSX-coma.
    are you freaking kidding me Apple? I mean REALLY?!!!! who the heck designed this?!!! I want to know. I want his or her name and I want to sit down with them and have a long chat. and then I'd probably splash cold water on their face to wake them up.
    I am starting to believe that Apple is Satan.

Maybe you are looking for