SBO Alerts and Service calls

Is it possible to have service calls automatically generated by SAP alerts such that an alert can be set to automatically create a service call when the set time comes off ?
Kind Regards,

Martin,
Not using Business One out-of-the-box.  You could probably use the SDK to code an add-on to do this.
Eddy

Similar Messages

  • Route node and Service Call out in OSB

    In OSB for a composite Proxy service (PS) that has to call 3 external services in sequence- we make service call out for 1st and 2nd external services and for invoking the last external service we can use route node.
    Here technically PS is making web service calls to all the three external services. For the first two OSB uses service call outs and for the last one, route node is used.
    What is the difference in service callout and route node in invoking an external service?
    If route node is better in any ways why can't OSB come with route node type message flow action for all external service calls?
    Thanks

    HI there,
    I have the same scenario as yours, I have to call 3 external services using Service Callouts and i have no idea how to use service callouts, how to and what to configure in SOAP body OR Payload parameters.
    I have to call one service and then the response of the 1st service , i have to pass it as a request to the 2nd service, so on.
    Can u please share with me how i can do it and what will be the best approach for that.
    Thanks and Regards
    Piyush Kapoor

  • Series Primary overlaps object Service Call

    hI SAP gurus,
    i am trying to create new series in Document Numbering for  'Service Call' , it doesn't allow me to create Series Numbering and following Error is showing ...
    Series Primary overlaps object Service Call
    Does any one know how should i create a new Series for Service Call..?
    i appreciate your help.
    Thanks and Regards,
    kaviprashu

    hi,
    ok i will quote this for you
    Symptom
    It is a legal requirement in Brazil that service calls are numbered.
    Solution
    To facilitate the legal requirement that users can trace and manage service calls efficiently, it is now possible to assign service calls to sequential series numbering. All marketing document numbering rules (search, overlapping numbers, manual series, and etc.) are also applied on service calls. The following fields and objects are added:
    In the Document Numbering - Setup window, the service calls object is added.
    To access the Document Numbering - Setup window, choose Administration -> System Initialization -> Document Numbering.
    In the Series - Service Calls - Setup window, the 'Primary' series is added.
    For new and upgraded companies, the application automatically creates the 'Primary' series for service calls.
    In the Numbering Series - Setup window, the 'Primary' series is added.
    In the Service Call window, the No. fields (selection of series and number) are added.
    To access the Service Call window, choose Service -> Service Call.
    In the Relate Series to Document - Setup window, the service calls object is added.
    For the service reports (Service Calls, Service Calls by Queue, Response Time by Assigned to, Average Closure Time, Service Monitor, My Service Calls, My Open Service Calls and My overdue Service Calls, Service Contract document - subtab Service Calls and Customer Equipment Card - subtab Service Calls):
    Call No. (label text) is changed to Call ID.
    The Document No. field represents the new call no. field.
    Series column is added to service reports.
    The Check Document Numbering - Selection Criteria window also includes checking of the service calls sequence.
    To access the Check Document Numbering - Selection Criteria window, choose Administration -> Utilities -> Check Document Numbering.
    For new created service calls, no record will be written to History Change Log when you add service calls (the same as the system behavior in the marketing documents).
    Only after the actual update on an already added service call, a history record will be added.
    There is no change in the already existing Call ID field, the behavior of this field stays the same.
    Other terms
    service calls, series, numbering, B1, sequential
    Header Data
    Released on     15.08.2011 15:48:33
    Release status     Released for Customer
    Component     SBO-SER-SCL Service Call
    Priority     Recommendations/additional info
    Category     Advance development
    References
    This document is referenced by:
    SAP Business One Notes
    1606253           Overview Note for SAP Business One 8.81 patch 07
    Validity
    Software Component
    Version
    SAP BUSINESS ONE
    8.81
    regards,
    Fidel

  • How can I associate an A/P invoice to a service call?

    Hi,
    Customer wants this:
    1. They (Co. A) gets a service call from their customer say for lump sum of 400 dollars.
    2. They (Co. A)  give out a contract to technician say at 45 dollars an hours and travel expenses. This is SERVICE ITEM for a total expense of say 45*2+120=210.
    3. Technician (A Vendor BP in SAP Business one) produces a PO. Co. A pays off the Technician.
    How can I create a Service Call to show both ends of incoming revenue and outgoing expense in the service call?
    Appreciate your help.
    Thank you.

    Dear Syed Aleem,
    I have described some ideas, but if these ideas do not help you, please come back to us with more details of what you need.
    1. They (Co. A) gets a service call from their customer say for lump sum of 400 dollars.
    Here you can create the servce call with the information in the General Tab and in the Remark and in the subject. If this is not enough I would suggest to create an activity and write your remark and content in the activity.
    You can create an activity clicking on the Activity tab. In the activity there is a tab called linked documents and you can add documents linked to the activity and service call.
    2. They (Co. A) give out a contract to technician say at 45 dollars an hours and travel expenses. This is SERVICE ITEM for a total expense of say 45*2+120=210.
    You can use anothe activity or you can add Return from Technician under the Expenses tab of the Service call.
    3. Technician (A Vendor BP in SAP Business one) produces a PO. Co. A pays off the Technician.
    Now, create another activity (or your first one) and add the Purchase order and the payment to it.
    Please, let me know if my suggestions help you.
    Regards,
    Marcella Rivi
    SAP Business One Forums Team

  • Blocking Service Call alerts

    When a Service Call is added andassigned to a 'Handled By' person, standard SBO functionality sends an alert message to the person.
    Is there any way to block these messages or prevent them from being generated without disabling the entire message service?
    Regards,
    Douglas

    Hi Douglas,
    I'm not sure where it is set, but I use the service module daily and do not receive these alerts, so there must be some way to suppress them.
    Perhaps under System Initialisation> Gerneral Settings on the services tab, the alert for activities scheduled for today? Mine is not set.
    It may be a matter of trial & error.....

  • Service Call in SBO 2005 B PL 38 - Activity done but not added to call

    Hi All,
    I have updated PL 38, SBO 2005 B, I had created Service call, it was created successfully, now i have done activity of return but it dosent add to activity tab and gives us error -> "Generate SCActivity : A Service Call Activity dose not exist"
    Can any one has idea or solution of this please.
    With Warm Regards
    Chintesh Soni

    Hi
    I am not sure note :891809 is suitable for your issue or not.
    this note is about "The Activity exists but it seems that there is no link saved between
    Service Call and Activity."
    hope it could be helpful.

  • Join a service call and one serial number?

    In admin web tools
    Can  join a service call and one customer equipment card (serial number) ?

    The company sells machines for industry.
    Every machine and component has a serial number and u201Ccustomer equipment cardu201D in SBO.
    Usually, If the customer has a problem call to company.
    1.-  SBO user get the u201Ccall serveru201D
    2.- SBO user support join the u201Ccall serveru201D and  u201Ccustomer equipment cardu201D
    3.- SBO user go to call server  create a Delivery (works and equipment)
    Unfortunately the technical support, works in customer company and usually canu2019t entry to SBO in several days.
    We like use the u201Cweb toolsu201D, the technical support uses the web and can see the u201Ccall serveru201D, the Customer and marketing documents.
    But canu2019t assign a u201Ccustomer equipment cardu201D to  u201Ccall serveru201D and synchronize to SAP and create a Delivery by WEB
    Can you proposal a new work flow by web?
    Muchas gracias.

  • Thanks this was very useful.. I have a brand new iphone 4s unlocked version from singapore and I am having the same problem constant network fluctuations, no service, call failed, invalid sim, sim failure, bars fluctuating from 5 - 3 - 2 - 1, no signal/ba

    I have a brand new iphone 4s unlocked version from singapore and I am experiencing constant network fluctuations on my iphone , no service, call failed, invalid sim, sim failure, bars fluctuating from 5 - 3 - 2 - 1, no signal/bars searching etc... Ifeel miserable after trying out all the options changed multiple sims, tried multiple carriers, restored the phone back and have set-up as new device but the problem does not get solved... its is so frustrating that after investing on a world's most expensive phone you cannot enjoy the calling features which the phone offers which is the main thing you own the phone for.. Rest of the things are working.. The funniest part I am not able to make calls or receive calls but can access the internet..  I have tried every possible thing and really very frustrated with this iphone of mine...I hope the problem gets solved.. would anyone have any solutions to this problem.. Does it mean one should never update software as I hear that after updating to IOS.5.1 the problem has started coming and same has been with there.... Apple says its a hardware failure which is very difficult to digest as sometimes I get 5 bars and able to make and receive calls but 95% of the time I am unable to. If anyone has any solution I will be very happy if he or share can share the same. Many thanks. its so disgusting to experience this on top of this apple does not support global warranty for the phone as you need to go to the country from where you bought the phone for replacement.. Truly sad state of affairs.. very very very dissappointing.

    Have a look at this it might help
    http://support.apple.com/kb/TS4148

  • Why Service Call and why not call Function module Directly in WD ABAP

    Hi,
    I have created a Webdynpro applications and the logic requires calling avrious Function modules.
    Do I need to create Service Call for each Function module or call them directly.
    It would be great if you can suggest me under what cases I need to opt for Service call
    For example, if I use 'RP_CALC_DATE_IN_INTERVAL', do I need to use Service call or call function module directly.
    Note: I have searched forums but could not get the correct answer which I want
    Thanks!

    The Service Call is really meant to be a wizard/time saver.  It has the advantage that it can generate matching context nodes/attributes for the interface of the Function Module you are calling. However everything that the service call does can also be created by hand.
    Personally I'm not a fan of what the service call wizard generates.  Its good as a time saver or for beginners, but I find I prefer to touch up the code it generates anyway. I much prefer to create a nice reusable model class with its own unit test and then consume this model class (with the service call wizard) from WD.  This model class might contain one or more function module calls depending upon what logic I need to access.

  • Web Service call - XI - SAP  and  SAP - XI  - Web Service response ???

    Hi ALL,
    Need some  guidance on the following Scenario :
    A Legacy system  would  transfer some data to SAP thoruhg a Web Service call and  would expect a response from SAP by way of a response to the same Web service call
    A synchronous Interface , inbound to sap via a Web service call and back  to the legacy system through the response to the same Web Service .
    Need to provide WSDL to the Legacy system
    Any help on how to do the above mentioned will be apreciated
    thanks in advance

    SD,
    Check this weblog for step by step procedure:
    /people/siva.maranani/blog/2005/09/03/invoke-webservices-using-sapxi
    Here instead of deploying in XI you will deploy your webservice in the legacy system.
    If you want to test this webservice then check this weblog:
    /people/siva.maranani/blog/2005/09/03/invoke-webservices-using-sapxi
    ---Satish

  • Capture travel time expenses and working hours spent on the service call

    Hi Experts,
    I have One Year AMC contract with my customer.Under AMC he called me for 10 times.I need to
    Capture travel time expenses and working hours spent on all the service call, Non of them will be billed to the customer.
    This is just for our internal tracking.this particular data will reside within the office premises.
    Explain how efficiently we can track this particular requirement in SAP Business One
    Regards,
    Vikram

    Hi Vikram
    You will notice on the item master records that there is a field called Item Type. The options are Item, Labor and Travel. In order for the service module to recognize the expense or charge type, either Labor or Travel must be select. Create a service item (untick inventory item) and choose the Item Type as Labor or Travel. When you now create a Delivery/Invoice from the expenses section of the service call, it will identify and warn you if you charge the customer, as this would be defined in your service contract template as non billable charges. You can still create a Delivery for the charges and put quantities and values on the Delivery document. In this case you are not going to invoice the customer for the charges, so you can "Close" the Delivery. Just be aware that closing the Delivery will post the value to an offset account defined in the Account Determination.
    The benefit of this approach is that the Delivery will post a debit and credit in your G/L that will "accrue" what the costs are of servicing the customer. My suggestion would be to set the account determination for the Labor/Travel item(s) to item level and define the Revenue/Expense accounts to specific G/L accounts.
    Let me know if you need more information or assistance with the above.
    Kind regards
    Peter Juby

  • Unable to Start/Stop SBO Mailer and SBO Backup services

    Hi All,
    With reference to the thread of the following Link : SBO Backup and Messenging Service - Starting , We have a customer on SAP B1 8.8 PL 16 and we faced the same issue wherein after restarting the server, SBO Mailer and SBO Backup services show status as starting and all buttons are greyed out.
    As per the thread we did re-install the server tools and it worked fine. But when we restart the server again the same issue arises.
    Kindly reply back at the earliest...
    Thanks and Regards,
    Pritesh Shah

    Dear Pritesh Shah,
    please try the following:
    Exit the Service Manager.
    On the Server got to Start- > and locate the Icon of the Service Manager -> click right and "Use as Administrator.
    After this open the Service Manager and take a look if you could activate the SBO Mailer and SBO Backup.
    I hope this helps.
    Best regards,
    Indira

  • OSB Dynamic service call or dynamic route and transactions

    Hello,
    I've got the following problem in my OSB architecture for asynchronous incomming services.
    OSB version is 10.3.1
    ConnectionFactory is XA
    Problem domain:
    Dynamic service call or dynamic route within transaction boundary
    Elements within transaction:
    1.     JMS Queue ->
    2.     Upper Proxy Service (De-queue) ->
    3.     Lower Proxy Service (Canonical Service) ->
    4.     Business Service (Data Service) ->
    5.     Database Adapter->
    6.     Database
    Dynamic element
    Upper Proxy Service (De-Queue) must be able to determine which Lower Proxy Service (Canonical Service) has to be called on the basis of the message taken from the JMS Queue without losing the transaction (this doesn’t work yet).
    Already tried possible solutions:
    •     Make a service call dynamic by setting the $inbound name attribute. This results in a this property is read-only error.
    •     Use a Dynamic route instead of a service-call. This results in a loss of transaction. The message is deleted from the Queue without taking failure or success into account.
    •     Use a Dynamic route with a quality of service set to exactly once in the header. This seems to be ignored, results in a loss of transaction.
    •     Use a Dynamic route with an explicit reply with failure for errors. Results in a loss of transaction.
    •     Use a Dynamic Publish. This doesn’t fit the required flow because it has no response.
    I hope someone can shed some light on this because I'm at a total loss. I found some references in the forum to what seems to be the same problem but without definite answers. A work-around is also a viable answer.
    Regards,
    Bas Mul

    Hi,
    I'll try to clarify.
    Upper proxy dequeues a message.
    Depending on a value of a specific tag within the message a canonical proxy service (out of 5 at the moment but this numer could increase) has to be called (and be dynamic transform transformed to the format of the specific canonical).
    The canonical service must then pass the message to a database adaper's business service which is responsible for the database insert/update/read.
    If something in the chain from dequeue to database action goes wrong the message may not dissapear from the queue.
    Somehow a dynamic route in the message flow between dequeue proxy and canonical proxy breaks the transaction.
    Bas

  • Why is it ok for a verizon wireless service representative to lie to a customer? I went over my monthly data and i called to ask for some help with the overage because i was barely over. They told me they would take care of it and sold me on a shared data

    why is it ok for a verizon wireless service representative to lie to a customer? I went over my monthly data and i called to ask for some help with the overage because i was barely over. They told me they would take care of it and sold me on a shared data plan that would result in 2gb less data but told me i would save 20$ a month. I agreed and recieved my next statement and to my suprise my bill actually went up 15$ a month and i talked to several people and they all told me there is nothing that can be done to get back on the plan i was on and they can not even give me a discount to get me back to what i was paying. They can only offer me a convenience credit. I will be cancelling service.

    ajwest101,
    We do not want to see you go. I truly apologize for any misinformation regarding your plan. Let's investigate into this a little further. What plan were you on? What plan were you switched to? If you look at the detailed billing online of your previous bill do you see any additional charges other then the plan?
    LindseyT_VZW
    Follow us on Twitter @VZWSupport

  • Service call and code wizard

    Dear All,
    I am working on ECC 6.0 with Eph2 and SAP_HR SP27, when i tried to create a service call to function module in the Adapt Context i am not able to view the check box for selection.
    Also when i click the Webdynpro Code Wizard it shows only a template gallery with standard screen,from and table only, which is not not displayin the Web dynpro statement structure
    What could be the possible reason?
    Patch level update or Service activation ?
    Could you help me out in the solving this issue?

    > when i tried to create a service call to function module in the Adapt Context i am not able to view the check box for selection.
    What checkbox can you not see?  I am looking at that step in the Wizard and there isn't any checkbox - just a table control with the node type, name, object type, new name.
    >Also when i click the Webdynpro Code Wizard it shows only a template gallery with standard screen,from and table only, which is not not displayin the Web dynpro statement structure
    The Web Dynpro Code Wizard from the View-layout tab should only have the Screen, Form, and Table option.  What else where you expecting. If you want the code generation wizard then you are in the wrong place.  Form the method editor choose the Web Dynpro Code Wizard and you will get a completely different set of options than choosing the same option from the view-layout tab.

Maybe you are looking for