SCCM 2012 R2 PXE Issue to Hyper-V VM Windows 7 and 8.1

Good day
I've looked for solutions and there are very similar cases to mine but none of the solutions worked... unless I missed something...
I'm running out of ideas.
I had an issue with my boot image drivers not wanting to distribute and I got an error every time I try to update the boot image.
So I removed all of the drivers, distributed and the error went away. Then I reloaded my network drivers and lo and behold, I can't PXE to VMs anymore!
Deploying to physical hardware works 100%, its just my virtual machines. When I deploy, it loads up my WIM file, gets to the stage
where it says preparing network connections and then it restarts without an error (basically bombs out at the part where it is supposed to start formatting the disks).
I've confirmed network connectivity by using the F8 command window. Here is my SMSTS log file. Any help is appreciated.
Hyper-V storage drivers maybe? Yes... before anyone asks, I am using a legacy NIC on the VM and I'm on a subnet that
is setup in SCCM boundaries.
Logs are from x:\windows\temp\smstslog for anyone from the future reading this and having the same issue as me.
Help would be greatly appreciated!
<![LOG[Parsing Policy Body.]LOG]!><time="09:10:20.852-480" date="07-15-2014"
component="TSPxe" context="" type="0" thread="416" file="tspolicy.cpp:2141"> <![LOG[Getting local network information.]LOG]!><time="09:10:20.852-480" date="07-15-2014"
component="TSPxe" context="" type="1" thread="416" file="resolvesource.cpp:1968"> <![LOG[DhcpGetOriginalSubnetMask entry point is supported.]LOG]!><time="09:10:20.852-480"
date="07-15-2014" component="TSPxe" context="" type="0" thread="416" file="ccmiputil.cpp:117"> <![LOG[Begin checking Alternate Network Configuration]LOG]!><time="09:10:20.852-480"
date="07-15-2014" component="TSPxe" context="" type="0" thread="416" file="ccmiputil.cpp:1095"> <![LOG[spNamespace.Open(sNamespacePath), HRESULT=8004100e (e:\nts_sccm_release\sms\framework\ccmutillib\ccmiputil.cpp,1109)]LOG]!><time="09:10:20.867-480"
date="07-15-2014" component="TSPxe" context="" type="0" thread="416" file="ccmiputil.cpp:1109"> <![LOG[Finished checking Alternate Network Configuration]LOG]!><time="09:10:20.867-480"
date="07-15-2014" component="TSPxe" context="" type="0" thread="416" file="ccmiputil.cpp:1172"> <![LOG[Adapter {AB445F6E-1085-44C1-98A7-2AEC2ECF752F} is DHCP enabled.
Checking quarantine status.]LOG]!><time="09:10:20.867-480" date="07-15-2014" component="TSPxe" context="" type="0" thread="416" file="ccmiputil.cpp:436"> <![LOG[Content
location request:]LOG]!><time="09:10:20.867-480" date="07-15-2014" component="TSPxe" context="" type="1" thread="416" file="resolvesource.cpp:1973"> <![LOG[
Package : AU000001.2]LOG]!><time="09:10:20.867-480" date="07-15-2014" component="TSPxe" context="" type="1" thread="416" file="resolvesource.cpp:1974"> <![LOG[
Client : GUID:22BBA366-B85B-4109-A4B2-9D79F9930C94]LOG]!><time="09:10:20.867-480" date="07-15-2014" component="TSPxe" context="" type="1" thread="416" file="resolvesource.cpp:1975"> <![LOG[
Local : 1]LOG]!><time="09:10:20.867-480" date="07-15-2014" component="TSPxe" context="" type="1" thread="416" file="resolvesource.cpp:1976"> <![LOG[
Remote : 0]LOG]!><time="09:10:20.867-480" date="07-15-2014" component="TSPxe" context="" type="1" thread="416" file="resolvesource.cpp:1977"> <![LOG[
Internet: 0]LOG]!><time="09:10:20.867-480" date="07-15-2014" component="TSPxe" context="" type="1" thread="416" file="resolvesource.cpp:1978"> <![LOG[Sending
RequestContentLocations for AU000001]LOG]!><time="09:10:20.883-480" date="07-15-2014" component="TSPxe" context="" type="1" thread="416" file="libsmsmessaging.cpp:3462"> <![LOG[Setting
message signatures.]LOG]!><time="09:10:20.899-480" date="07-15-2014" component="TSPxe" context="" type="0" thread="416" file="libsmsmessaging.cpp:1295"> <![LOG[Setting
the authenticator.]LOG]!><time="09:10:20.899-480" date="07-15-2014" component="TSPxe" context="" type="0" thread="416" file="libsmsmessaging.cpp:1325"> <![LOG[CLibSMSMessageWinHttpTransport::Send:
URL: VS-AU000-030.kentzgroup.local:80 CCM_POST /ccm_system/request]LOG]!><time="09:10:20.899-480" date="07-15-2014" component="TSPxe" context="" type="1" thread="416" file="libsmsmessaging.cpp:8604"> <![LOG[Request
was successful.]LOG]!><time="09:10:20.977-480" date="07-15-2014" component="TSPxe" context="" type="0" thread="416" file="libsmsmessaging.cpp:8939"> <![LOG[::DecompressBuffer(65536)]LOG]!><time="09:10:20.977-480"
date="07-15-2014" component="TSPxe" context="" type="0" thread="416" file="ccmzlib.cpp:739"> <![LOG[Decompression (zlib) succeeded: original size 684, uncompressed
size 5042.]LOG]!><time="09:10:20.977-480" date="07-15-2014" component="TSPxe" context="" type="0" thread="416" file="ccmzlib.cpp:651"> <![LOG[Location
Reply: <ContentLocationReply SchemaVersion="1.00"><ContentInfo PackageFlags="0"><ContentHashValues/></ContentInfo><Sites><Site><MPSite SiteCode="AU0" MasterSiteCode="AU0" SiteLocality="FALLBACK"
IISPreferedPort="80" IISSSLPreferedPort="443"/><LocationRecords><LocationRecord><URL Name="http://SR-AU008-002.kentzgroup.local/SMS_DP_SMSPKG$/AU000001" Signature="http://SR-AU008-002.kentzgroup.local/SMS_DP_SMSSIG$/AU000001"/><ADSite
Name="AU-Brisbane"/><IPSubnets><IPSubnet Address="10.72.8.0"/><IPSubnet Address=""/></IPSubnets><Metric Value=""/><Version>7958</Version><Capabilities SchemaVersion="1.0"><Property
Name="SSLState" Value="0"/></Capabilities><ServerRemoteName>SR-AU008-002.kentzgroup.local</ServerRemoteName><DPType>SERVER</DPType><Windows Trust="0"/><Locality>FALLBACK</Locality></LocationRecord><LocationRecord><URL
Name="http://SR-AU066-001.kentzgroup.local/SMS_DP_SMSPKG$/AU000001" Signature="http://SR-AU066-001.kentzgroup.local/SMS_DP_SMSSIG$/AU000001"/><ADSite Name="AU-Perth"/><IPSubnets><IPSubnet Address="10.72.66.0"/><IPSubnet
Address=""/></IPSubnets><Metric Value=""/><Version>7958</Version><Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities><ServerRemoteName>SR-AU066-001.kentzgroup.local</ServerRemoteName><DPType>SERVER</DPType><Windows
Trust="0"/><Locality>FALLBACK</Locality></LocationRecord><LocationRecord><URL Name="http://SVRHEND04.kentzgroup.local/SMS_DP_SMSPKG$/AU000001" Signature="http://SVRHEND04.kentzgroup.local/SMS_DP_SMSSIG$/AU000001"/><ADSite
Name="AU-Perth"/><IPSubnets><IPSubnet Address="10.72.12.0"/><IPSubnet Address=""/></IPSubnets><Metric Value=""/><Version>7958</Version><Capabilities SchemaVersion="1.0"><Property
Name="SSLState" Value="0"/></Capabilities><ServerRemoteName>SVRHEND04.kentzgroup.local</ServerRemoteName><DPType>SERVER</DPType><Windows Trust="0"/><Locality>FALLBACK</Locality></LocationRecord><LocationRecord><URL
Name="http://VS-AU020-003.kentzgroup.local/SMS_DP_SMSPKG$/AU000001" Signature="http://VS-AU020-003.kentzgroup.local/SMS_DP_SMSSIG$/AU000001"/><ADSite Name="AU-Darwin-BlaydinPt"/><IPSubnets><IPSubnet Address="10.72.20.0"/><IPSubnet
Address=""/></IPSubnets><Metric Value=""/><Version>7958</Version><Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities><ServerRemoteName>VS-AU020-003.kentzgroup.local</ServerRemoteName><DPType>SERVER</DPType><Windows
Trust="0"/><Locality>FALLBACK</Locality></LocationRecord></LocationRecords></Site></Sites><RelatedContentIDs/></ContentLocationReply>]LOG]!><time="09:10:20.977-480" date="07-15-2014"
component="TSPxe" context="" type="1" thread="416" file="libsmsmessaging.cpp:3489"> <![LOG[MCS server: ]LOG]!><time="09:10:20.977-480" date="07-15-2014"
component="TSPxe" context="" type="1" thread="416" file="libsmsmessaging.cpp:3676"> <![LOG[Found location: http://SR-AU008-002.kentzgroup.local/SMS_DP_SMSPKG$/AU000001]LOG]!><time="09:10:20.977-480"
date="07-15-2014" component="TSPxe" context="" type="1" thread="416" file="libsmsmessaging.cpp:3764"> <![LOG[Local=0]LOG]!><time="09:10:20.977-480"
date="07-15-2014" component="TSPxe" context="" type="1" thread="416" file="libsmsmessaging.cpp:3801"> <![LOG[MCS server: ]LOG]!><time="09:10:20.977-480"
date="07-15-2014" component="TSPxe" context="" type="1" thread="416" file="libsmsmessaging.cpp:3676"> <![LOG[Found location: http://SR-AU066-001.kentzgroup.local/SMS_DP_SMSPKG$/AU000001]LOG]!><time="09:10:20.977-480"
date="07-15-2014" component="TSPxe" context="" type="1" thread="416" file="libsmsmessaging.cpp:3764"> <![LOG[Local=0]LOG]!><time="09:10:20.977-480"
date="07-15-2014" component="TSPxe" context="" type="1" thread="416" file="libsmsmessaging.cpp:3801"> <![LOG[MCS server: ]LOG]!><time="09:10:20.977-480"
date="07-15-2014" component="TSPxe" context="" type="1" thread="416" file="libsmsmessaging.cpp:3676"> <![LOG[Found location: http://SVRHEND04.kentzgroup.local/SMS_DP_SMSPKG$/AU000001]LOG]!><time="09:10:20.977-480"
date="07-15-2014" component="TSPxe" context="" type="1" thread="416" file="libsmsmessaging.cpp:3764"> <![LOG[Local=0]LOG]!><time="09:10:20.977-480"
date="07-15-2014" component="TSPxe" context="" type="1" thread="416" file="libsmsmessaging.cpp:3801"> <![LOG[MCS server: ]LOG]!><time="09:10:20.977-480"
date="07-15-2014" component="TSPxe" context="" type="1" thread="416" file="libsmsmessaging.cpp:3676"> <![LOG[Found location: http://VS-AU020-003.kentzgroup.local/SMS_DP_SMSPKG$/AU000001]LOG]!><time="09:10:20.977-480"
date="07-15-2014" component="TSPxe" context="" type="1" thread="416" file="libsmsmessaging.cpp:3764"> <![LOG[Local=0]LOG]!><time="09:10:20.977-480"
date="07-15-2014" component="TSPxe" context="" type="1" thread="416" file="libsmsmessaging.cpp:3801"> <![LOG[Processing 4 locations.]LOG]!><time="09:10:20.977-480"
date="07-15-2014" component="TSPxe" context="" type="1" thread="416" file="resolvesource.cpp:2009"> <![LOG[Not processing remote location:]LOG]!><time="09:10:20.977-480"
date="07-15-2014" component="TSPxe" context="" type="1" thread="416" file="resolvesource.cpp:2054"> <![LOG[ Flags: 00000000]LOG]!><time="09:10:20.977-480"
date="07-15-2014" component="TSPxe" context="" type="1" thread="416" file="resolvesource.cpp:2055"> <![LOG[ URLs : 1]LOG]!><time="09:10:20.977-480"
date="07-15-2014" component="TSPxe" context="" type="1" thread="416" file="resolvesource.cpp:2056"> <![LOG[ SMB : ]LOG]!><time="09:10:20.977-480"
date="07-15-2014" component="TSPxe" context="" type="1" thread="416" file="resolvesource.cpp:2057"> <![LOG[ MCS : ]LOG]!><time="09:10:20.977-480"
date="07-15-2014" component="TSPxe" context="" type="1" thread="416" file="resolvesource.cpp:2058"> <![LOG[Not processing remote location:]LOG]!><time="09:10:20.977-480"
date="07-15-2014" component="TSPxe" context="" type="1" thread="416" file="resolvesource.cpp:2054"> <![LOG[ Flags: 00000000]LOG]!><time="09:10:20.977-480"
date="07-15-2014" component="TSPxe" context="" type="1" thread="416" file="resolvesource.cpp:2055"> <![LOG[ URLs : 1]LOG]!><time="09:10:20.977-480"
date="07-15-2014" component="TSPxe" context="" type="1" thread="416" file="resolvesource.cpp:2056"> <![LOG[ SMB : ]LOG]!><time="09:10:20.977-480"
date="07-15-2014" component="TSPxe" context="" type="1" thread="416" file="resolvesource.cpp:2057"> <![LOG[ MCS : ]LOG]!><time="09:10:20.977-480"
date="07-15-2014" component="TSPxe" context="" type="1" thread="416" file="resolvesource.cpp:2058"> <![LOG[Not processing remote location:]LOG]!><time="09:10:20.977-480"
date="07-15-2014" component="TSPxe" context="" type="1" thread="416" file="resolvesource.cpp:2054"> <![LOG[ Flags: 00000000]LOG]!><time="09:10:20.977-480"
date="07-15-2014" component="TSPxe" context="" type="1" thread="416" file="resolvesource.cpp:2055"> <![LOG[ URLs : 1]LOG]!><time="09:10:20.977-480"
date="07-15-2014" component="TSPxe" context="" type="1" thread="416" file="resolvesource.cpp:2056"> <![LOG[ SMB : ]LOG]!><time="09:10:20.992-480"
date="07-15-2014" component="TSPxe" context="" type="1" thread="416" file="resolvesource.cpp:2057"> <![LOG[ MCS : ]LOG]!><time="09:10:20.992-480"
date="07-15-2014" component="TSPxe" context="" type="1" thread="416" file="resolvesource.cpp:2058"> <![LOG[Not processing remote location:]LOG]!><time="09:10:20.992-480"
date="07-15-2014" component="TSPxe" context="" type="1" thread="416" file="resolvesource.cpp:2054"> <![LOG[ Flags: 00000000]LOG]!><time="09:10:20.992-480"
date="07-15-2014" component="TSPxe" context="" type="1" thread="416" file="resolvesource.cpp:2055"> <![LOG[ URLs : 1]LOG]!><time="09:10:20.992-480"
date="07-15-2014" component="TSPxe" context="" type="1" thread="416" file="resolvesource.cpp:2056"> <![LOG[ SMB : ]LOG]!><time="09:10:20.992-480"
date="07-15-2014" component="TSPxe" context="" type="1" thread="416" file="resolvesource.cpp:2057"> <![LOG[ MCS : ]LOG]!><time="09:10:20.992-480"
date="07-15-2014" component="TSPxe" context="" type="1" thread="416" file="resolvesource.cpp:2058"> <![LOG[No static content server.]LOG]!><time="09:10:20.992-480"
date="07-15-2014" component="TSPxe" context="" type="1" thread="416" file="resolvesource.cpp:2135"> <![LOG[LocationsList.size() > 0, HRESULT=80040102 (e:\qfe\nts\sms\framework\tscore\resolvesource.cpp,2138)]LOG]!><time="09:10:20.992-480"
date="07-15-2014" component="TSPxe" context="" type="0" thread="416" file="resolvesource.cpp:2138"> <![LOG[FALSE, HRESULT=80040102 (e:\qfe\nts\sms\framework\tscore\tspolicy.cpp,1930)]LOG]!><time="09:10:20.992-480"
date="07-15-2014" component="TSPxe" context="" type="0" thread="416" file="tspolicy.cpp:1930"> <![LOG[Content location request for AU000001:2 failed. (Code 0x80040102)]LOG]!><time="09:10:20.992-480"
date="07-15-2014" component="TSPxe" context="" type="3" thread="416" file="tspolicy.cpp:1930"> <![LOG[hr, HRESULT=80040102 (e:\qfe\nts\sms\framework\tscore\tspolicy.cpp,2702)]LOG]!><time="09:10:20.992-480"
date="07-15-2014" component="TSPxe" context="" type="0" thread="416" file="tspolicy.cpp:2702"> <![LOG[Failed to resolve PackageID=⢈ƿ]LOG]!><time="09:10:20.992-480"
date="07-15-2014" component="TSPxe" context="" type="3" thread="416" file="tspolicy.cpp:2702"> <![LOG[(*iTSReference)->Resolve(
pTSPolicyManager, dwResolveFlags ), HRESULT=80040102 (e:\qfe\nts\sms\framework\tscore\tspolicy.cpp,3488)]LOG]!><time="09:10:20.992-480" date="07-15-2014" component="TSPxe" context="" type="0" thread="416"
file="tspolicy.cpp:3488"> <![LOG[m_pSelectedTaskSequence->Resolve( m_pPolicyManager, TS::Policy::TaskSequence::ResolvePolicy | TS::Policy::TaskSequence::ResolveSource, fpCallbackProc, pv, hCancelEvent), HRESULT=80040102
(e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmediawizardcontrol.cpp,1564)]LOG]!><time="09:10:20.992-480" date="07-15-2014" component="TSPxe" context="" type="0" thread="416" file="tsmediawizardcontrol.cpp:1564"> <![LOG[Failed
to resolve selected task sequence dependencies. Code(0x80040102)]LOG]!><time="09:10:20.992-480" date="07-15-2014" component="TSPxe" context="" type="3" thread="416" file="tsmediawizardcontrol.cpp:1564"> <![LOG[ResolveAndExecuteSelectedTaskSequence(
0, 0, 0 ), HRESULT=80040102 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmediawizardcontrol.cpp,2533)]LOG]!><time="09:10:20.992-480" date="07-15-2014" component="TSPxe" context="" type="0"
thread="416" file="tsmediawizardcontrol.cpp:2533"> <![LOG[RunWizardForPXE(), HRESULT=80040102 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmediawizardcontrol.cpp,2834)]LOG]!><time="09:10:20.992-480"
date="07-15-2014" component="TSPxe" context="" type="0" thread="416" file="tsmediawizardcontrol.cpp:2834"> <![LOG[oTSMediaWizardControl.Run( sMediaRoot, true, sTSLaunchMode
), HRESULT=80040102 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmbootstrap.cpp,1078)]LOG]!><time="09:10:20.992-480" date="07-15-2014" component="TSPxe" context="" type="0" thread="416"
file="tsmbootstrap.cpp:1078"> <![LOG[Execute( eExecutionEnv, sConfigPath, sTSXMLFile, uBootCount, &uExitCode ), HRESULT=80040102 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmbootstrap.cpp,1226)]LOG]!><time="09:10:20.992-480"
date="07-15-2014" component="TSPxe" context="" type="0" thread="416" file="tsmbootstrap.cpp:1226"> <![LOG[Exiting with return code 0x80040102]LOG]!><time="09:10:20.992-480"
date="07-15-2014" component="TSPxe" context="" type="1" thread="416" file="tsmbootstrap.cpp:1238"> <![LOG[Execution complete.]LOG]!><time="09:10:20.992-480"
date="07-15-2014" component="TSBootShell" context="" type="1" thread="796" file="bootshell.cpp:693"> <![LOG[hMap != 0, HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentscope.cpp,493)]LOG]!><time="09:10:20.992-480"
date="07-15-2014" component="TSBootShell" context="" type="0" thread="796" file="environmentscope.cpp:493"> <![LOG[m_pGlobalScope->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,335)]LOG]!><time="09:10:20.992-480"
date="07-15-2014" component="TSBootShell" context="" type="0" thread="796" file="environmentlib.cpp:335"> <![LOG[this->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,553)]LOG]!><time="09:10:20.992-480"
date="07-15-2014" component="TSBootShell" context="" type="0" thread="796" file="environmentlib.cpp:553"> <![LOG[::RegOpenKeyExW (HKEY_LOCAL_MACHINE, sKey.c_str(),
0, KEY_READ, &hSubKey), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\utils.cpp,809)]LOG]!><time="09:10:20.992-480" date="07-15-2014" component="TSBootShell" context="" type="0" thread="796"
file="utils.cpp:809"> <![LOG[RegOpenKeyExW is unsuccessful for Software\Microsoft\SMS\Task Sequence]LOG]!><time="09:10:20.992-480" date="07-15-2014" component="TSBootShell" context=""
type="2" thread="796" file="utils.cpp:809"> <![LOG[GetTsRegValue() is unsuccessful. 0x80070002.]LOG]!><time="09:10:20.992-480" date="07-15-2014" component="TSBootShell"
context="" type="2" thread="796" file="utils.cpp:842"> <![LOG[End program: ]LOG]!><time="09:10:20.992-480" date="07-15-2014" component="TSBootShell"
context="" type="1" thread="796" file="bootshell.cpp:725"> <![LOG[Finalizing logging from process 788]LOG]!><time="09:10:20.992-480" date="07-15-2014" component="TSBootShell"
context="" type="1" thread="796" file="tslogging.cpp:1741"> <![LOG[Finalizing logs to root of first available drive]LOG]!><time="09:10:20.992-480" date="07-15-2014"
component="TSBootShell" context="" type="1" thread="796" file="tslogging.cpp:1583"> <![LOG[LOGGING: Setting log directory to "D:\SMSTSLog".]LOG]!><time="09:10:21.039-480"
date="07-15-2014" component="TSBootShell" context="" type="1" thread="796" file="tslogging.cpp:1808">

I found the answer! FINALLY! Solution!
So, only a couple of things you have to do:
Go to Administration in the console and go to Boundary Groups.
Right click on the item and go to properties.
Go to the Reference tab.
And enable “Use this boundary group for site assignment” and choose for the correct site.
Also add the content location. Choose for your distribution point.
I was on a subnet that was set up in boundaries, BUT I did not assign the boundary group :-/
I hope this helps someone one day.

Similar Messages

I have a mid 2009 macbook pro and my issue is that I installed windows 7 and when I wan to install the drivers it says " bootcamp x64 is unsupported on this computer model" I tried installing the drivers with the bootcamp 4 but it did not work either

I have a mid 2009 macbook pro and my issue is that I installed windows 7 and when I wan to install the drivers it says " bootcamp x64 is unsupported on this computer model" I tried installing the drivers with the bootcamp 4 but it did not work either it says that i have a newer bootcamp version. I tried a few tricks but they didnot work. I hope to be helped

Welcome to Apple Support Communities
You can install a 64-bit Windows 7 or Vista version in your Mac. Make sure you downloaded these drivers > http://support.apple.com/kb/DL1630 Also, if you have the Snow Leopard DVD you used to upgrade your Mac or the OS X DVD that came with your Mac, you can use it to install the Boot Camp drivers

SCCM 2012 R2 PxE can't boot - your pc need to be repired.

Dear All,
These days, I upgraded SCCM 2012 to R2 , after that PxE can't boot , and shows a blue screen that your pc need to be repired, same issue like this:http://www.gerryhampsoncm.blogspot.ie/2013/02/sccm-2012-task-sequence-fails-with-bcd.html
And, i have also re-configed the pxe more times follow by this acticle , and still failed.
And, after I replace the \RemoteInstall\SMSTemp\2014.01.08.12.31.26.01.{xxxxxxxxx}.boot.bcd to \RemoteInstall\Tmp\x86x64{xxxxxxx}.bcd, and the PC can boot to the winpe well. that means the pc using Tmp folder's BCD store
to boot to WinPE, and not using SMSTemp's.
I check the PxE process:http://technet.microsoft.com/en-us/library/cc722358(v=ws.10).aspx
PXEBoot.com downloads Bootmgr.exe and the BCD store, and I think PXEBoot.com should download BCD store from SMSTemp folder, and should not be the Tmp folder.
So, my question is that why te PXEBoot.com download BCD from Tmp folder ? And how can I change it to download BCD from SMSTemp folder. ? I have been getting to crazy about this fucking problem.
Nemo

Reinstalling WDS and the PXE was not the answer, at least not for me, but I dunno about the original poster as he kept quiet.
For now I am trying to get SCCM2012 R2 running as this is the topic for my final projekt.
But I am stuck here, the problem is the same as the original poster mentioned.
Even thougt DHCP options are set to my CM and smsboot\x86\wdsnbp.com, pxe keeps loading boot\... and fails.
Making a copy from smsboot to boot and renaming the file fixes it in a dirty way.
The WDS-service has never been configured manually, after rolling back to a fresh Server and installing CU1 first nothing changed about that (PXE worked at all at least) und reinstalling the living dead out of the roles and features fixes nothing.
The remoteinstall folder gets populated everytime, with the SMS related stuff and the wds related stuff, I guess (boot, SMSboot, ...).
I tried various variations of the start path, TFTP still loads from boot instead smsboot.
The Images have been temporarily replaced with the one from our old site.
I renewed the whole site, this bugs me since 2012 R1 and R2 is the second site too.
I would really appreciate it if someone could help with an working solution.
Let me know if you need some more informations, site is described below.
In case this should get another Thread, let me know.
Thank you guys :)
Hyper-V Environment, Windows Server 2012 R2 Standard on all three Hosts (Gen 2),
Followed mainly the MS TLG for SCCM2012 for this, supported by windows-noob.
Have a nice day.
Little Edit right here: renaming the file only helps with the 89 error thing, but it doesn't help booting the sccm image.

SCCM 2012 R2 PXE not working because DHCP Option 43 is configured to AVAYA

Hello!
We are having some issues with PXE and OS Deployment with some computers.
We tested computers DELL, PXE and DHCP works without any issues. But we tested some HP computers and we received the error PXE-E77 Bad or missing discovery server list
We investigate that error and found that is related with the Option 43 Vendor Specific Info is enable on the DHCP Server, the solution that we tested and works as expected is create a new scope on the DHCP and without enable the Option 43.
That was a temporary solution for the issue, nevertheless we need to use PXE over our network, and we cannot remove the Option 43 on the DHCP configured for AVAYA, so we need a solution that can coexist with PXE and Option 43 on the DHCP.
We will apreciate any advice on this issue.
Thank in advance.
Manuel
Manuel´s Microsoft Forums Threads

The easiest way to deal with this problem is not to use DHCP scope options. Implement IP Helpers instead. It is straightforward to configure and is the only MS supported way anyway.
http://www.gerryhampsoncm.blogspot.ie/2013/02/sccm-2012-sp1-step-by-step-guide-part_9487.html
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

SCCM 2012 R2 Reporting issue updating SQL Reporting permissions

I am in the process of setting up SCCM 2012 R2. I am having an issue with the SCCM reporting. If I set the permissions in the SCCM console, the permissions do not propagate to the SQL reporting... I get this... This is from SRSRP.log...
Updating data source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} at ConfigMgr_DIT $$<SMS_SRS_REPORTING_POINT><01-15-2015 12:00:55.384+300><thread=5432 (0x1538)>
(!) Error retrieving folders - [A connection was successfully established with the server, but then an error occurred during the login process. (provider: SSL Provider, error: 0 - The target principal name is incorrect.)]. $$<SMS_SRS_REPORTING_POINT><01-15-2015 12:00:55.438+300><thread=5432 (0x1538)>
No folder configuration information found. $$<SMS_SRS_REPORTING_POINT><01-15-2015 12:00:55.441+300><thread=5432 (0x1538)>
Does anyone know how to fix?
I tried removing and re-installing the reporting point, changing the permissions in SQL Server... and a dozen other things.

I am in the process of setting up SCCM 2012 R2. I am having an issue with the SCCM reporting. If I set the permissions in the SCCM console, the permissions do not propagate to the SQL reporting... I get this... This is from SRSRP.log...
Updating data source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} at ConfigMgr_DIT $$<SMS_SRS_REPORTING_POINT><01-15-2015 12:00:55.384+300><thread=5432 (0x1538)>
(!) Error retrieving folders - [A connection was successfully established with the server, but then an error occurred during the login process. (provider: SSL Provider, error: 0 - The target principal name is incorrect.)]. $$<SMS_SRS_REPORTING_POINT><01-15-2015 12:00:55.438+300><thread=5432 (0x1538)>
No folder configuration information found. $$<SMS_SRS_REPORTING_POINT><01-15-2015 12:00:55.441+300><thread=5432 (0x1538)>
Does anyone know how to fix?
I tried removing and re-installing the reporting point, changing the permissions in SQL Server... and a dozen other things.

SCCM 2012 R2 ADR issue with proxy authentication

Hi,
We're migrating SCCM 2007 to SCCM 2012 R2.
In SCCM 2007, the proxy server is configured with user authentication, and this works.
In SCCM 2012 R2, the Software Update Point is installed locally and connected with a local WSUS 4.0 (Server 2012)
We use a proxy with user authentication for Update Deployment. (This user is the same as configured in SCCM 2007.)
The Proxy Server is Blue Coat SG.
The proxy account is used for:
The Synchronization works, but Automatic Deployment Rule (ADR) doesn't work.
When an Automatic Deployment Rule is started, it tries to authenticate 3 times.
The Patchdownloader.log shows:
Trying to connect to the root\SMS namespace on the <servername> machine.        Software Updates Patch Downloader        11/8/2013
12:19:06        3608 (0x0E18)
Connected to
\\<servername>\root\SMS        Software Updates Patch Downloader        11/8/2013 12:19:06        3608
(0x0E18)
Trying to connect to the
\\<servername.domain>\root\sms\site_ECM namespace on the <servername.domain> machine.        Software Updates Patch Downloader        11/8/2013
12:19:06        3608 (0x0E18)
Connected to
\\<servername.domain>\root\sms\site_ECM        Software Updates Patch Downloader        11/8/2013 12:19:06        3608
(0x0E18)
Download destination =
\\<servername.domain>\dp_wks_ms_updates$\3208bb5e-bcd9-4389-a0c9-02ef33ccb998.1\XPSEPSC-x86-en-US.exe .        Software Updates Patch Downloader        11/8/2013 12:19:07        3608
(0x0E18)
Contentsource =
http://wsus.ds.www.download.windowsupdate.com/msdownload/update/v3-19990518/cabpool/xpsepsc-x86-en-us_7ae70ca1330a099080c6c41c4d5b7f19b30dc0cd.exe .        Software Updates Patch Downloader        11/8/2013
12:19:07        3608 (0x0E18)
Downloading content for ContentID = 16819067,
FileName = XPSEPSC-x86-en-US.exe.        Software Updates Patch Downloader        11/8/2013 12:19:07        3608 (0x0E18)
Try username <domain\ProxyAccount>        Software Updates Patch Downloader        11/8/2013 12:19:07        8364
(0x20AC)
Proxy enabled proxy server <proxyserver>:8080        Software Updates Patch Downloader        11/8/2013
12:19:07        8364 (0x20AC)
HttpSendRequest failed HTTP_STATUS_PROXY_AUTH_REQ        Software Updates Patch Downloader        11/8/2013
12:19:07        8364 (0x20AC)
Download
http://wsus.ds.www.download.windowsupdate.com/msdownload/update/v3-19990518/cabpool/xpsepsc-x86-en-us_7ae70ca1330a099080c6c41c4d5b7f19b30dc0cd.exe to C:\Windows\TEMP\CAB6FD2.tmp returns 407        Software Updates
Patch Downloader        11/8/2013 12:19:07        8364 (0x20AC)
ERROR: DownloadContentFiles() failed with hr=0x80070197        Software Updates Patch Downloader        11/8/2013
12:19:07        3608 (0x0E18)
Then the proxy user account is locked:
Trying to connect to the root\SMS namespace on the <servername> machine.        Software Updates Patch Downloader        11/8/2013
12:20:11        3608 (0x0E18)
Connected to \\ <servername>\root\SMS        Software Updates Patch Downloader        11/8/2013
12:20:11        3608 (0x0E18)
Trying to connect to the
\\<servername.domain>\root\sms\site_ECM namespace on the <servername.domain> machine.        Software Updates Patch Downloader        11/8/2013
12:20:11        3608 (0x0E18)
Connected to
\\<servername.domain>\root\sms\site_ECM        Software Updates Patch Downloader        11/8/2013 12:20:11        3608
(0x0E18)
Download destination =
\\<servername.domain>\dp_wks_ms_updates$\e0a54221-3ff2-4129-b7cf-89bf5cd1f726.1\Windows-KB943729-x86-ENU.exe .        Software Updates Patch Downloader        11/8/2013
12:20:12        3608 (0x0E18)
Contentsource =
http://wsus.ds.download.windowsupdate.com/msdownload/update/software/updt/2009/10/windows-kb943729-x86-enu_e174c41ce3dcbd5c8922d6d1c39df1be425a70e0.exe .        Software Updates Patch Downloader        11/8/2013
12:20:12        3608 (0x0E18)
Downloading content for ContentID = 16824262,
FileName = Windows-KB943729-x86-ENU.exe.        Software Updates Patch Downloader        11/8/2013 12:20:12        3608 (0x0E18)
Try username <domain\ProxyAccount>        Software Updates Patch Downloader        11/8/2013 12:20:12        12480
(0x30C0)
Proxy enabled proxy server <proxyserver>:8080        Software Updates Patch Downloader        11/8/2013
12:20:12        12480 (0x30C0)
HttpSendRequest failed HTTP_STATUS_FORBIDDEN or HTTP_STATUS_DENIED        Software Updates Patch Downloader        11/8/2013
12:20:12        12480 (0x30C0)
Download
http://wsus.ds.download.windowsupdate.com/msdownload/update/software/updt/2009/10/windows-kb943729-x86-enu_e174c41ce3dcbd5c8922d6d1c39df1be425a70e0.exe to C:\Windows\TEMP\CAB6E4B.tmp returns 403        Software Updates
Patch Downloader        11/8/2013 12:20:12        12480 (0x30C0)
ERROR: DownloadContentFiles() failed with hr=0x80070193        Software Updates Patch Downloader        11/8/2013
12:20:12        3608 (0x0E18)
The RuleEngine.log shows:
Failed to download the update from internet. Error = 403 SMS_RULE_ENGINE 11/8/2013 16:18:25 3608 (0x0E18)
Failed to download ContentID 16824467 for UpdateID 16819978. Error code = 403 SMS_RULE_ENGINE 11/8/2013 16:18:25 3608 (0x0E18)
It seems that the ADR uses a wrong password when authenticating with the proxy, but this same user works when synchronizing with WSUS.
We performed the following actions with no result:
run the ADR manually and automatic,
reinstalled WSUS and SUP,
changed proxy user account.
Regards,
Matthias

Currently, the command shows:
Current WinHTTP proxy settings:
    Direct access (no proxy server).
We've been testing with:
upddwnldcfg.exe /s:<proxyserver>:<port> /u:<user> /allusers
psexec -i -s iexplore.exe, set Internet Explorer proxy manually
All with same result, proxy user getting locked when ADR runs.
(These settings have been removed after the test.)
I think dekac99 would suggest netsh winhttp set proxy or import proxy.
then turn off proxy use on the role SUP (this way not SCCM will send auth but all winhttp will use proxy)
the problems with that for me are:
- if MS implemented role-based proxy usage, why set at http layer - of course this might work as a workaround for the time being so it might be a good idea but I'm just not sure what unwanted issues it may cause
- the other thing is where I'm not sure, with set proxy you cannot define authentication account. if you use import from IE and the IE prompted for proxy auth, the stored credential will be used on winhttp layer (though I'm not 100% sure of that) - so this
is just too uncontrolled for me
- upddwnldcfg.exe will need to run in the name of system account (it stores credentials under HKCU so far I know it will be a per user based setting)
--> what confuses me, the catalog synch works which should use the same configured proxy and account(?), only ADR does not work. shouldn't they both use the same process for sending account auth info?

SCCM 2012 _ PXE error (no advertisement found)

Hi
i have an error, always happen with PXE deployment on SCCM 2012 SP1_CU4
i tray to uninstall DP ,WDS and delete Reminstall, recreate Boot images
nothing no advertisements found
save me
Mahmoud

Hi,
Quote: i import computer info in to Device collection
So could you pxe boot successfully after deploy the task sequence to the device?
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SCCM 2012 OSD PXE, OS System disk is D:/ !

HI !
SCCM 2012 st.OSD PXE, OS System disk is D:/ !
Deploing OS, resulting
in system drive
is D:/. How to achieve this
would be C :/?
cenubit

Ok.
What are the steps and conditions
are followed
to establish a
new Reference Image ?
cenubit

SCCM 2012- 2 Databases issue

We recently installed SCCM 2012 for end protection manager. Now we want to use the report services side of it. After installing the report services in SQL and attempting to map it via SCCM it will not allow me to use the primary DB since its hosted in our
DB cluster server. However, I do have a localhost SQL DB but it does not have any tables associated with it. Therefore, it will not allow me to see the server instance when attempting to add report services under add role site. Here are
some screen shots. Any help I would apprciate it. I will post pictures once my account gets verified via MS. Thank you

Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

SCCM 2012 Network Discovery Issue

Dear Team,
I want to discover my client less devices (routers, switches, & printers) in SCCM 2012 R2 via SNMP or Subnet Mask, we don't have DHCP in environment. How do I discover this client less devices what are the settings require on SCCM server & on
client less devices (routers, switches, & printers)

The subnet information can be retrieved from a device specified on the SNMP Devices tab or you need to configure the subnet manually in Subnet tab, then Network Discovery will query the network devices.
Juke Chou
TechNet Community Support

SCCM 2012 Client Communication Issue with SCCM 2007

My Clients was installed SCCM 2007 client version but somehow those clients reporting to SCCM 2012 Server
Note : My SCCM 2007 Server still active mode . and the SCCM 2007 client IP boundaries was not added into SCCM 2012 server
But still communicating to SCCM 2012 , what is the root cause ?
Best Regard's Krishna

Either, during the client installation the client was manually assigned to the ConfigMgr 2012 site (by specifying the site code), or during the client installation the client was auto assigned to the ConfigMgr 2012 site (that can only happen when there
is an overlap in the boundaries and that doesn't have to be the same type of boundary).
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

SCCM 2012- Security updates issue

We are unable to find MS13-053 bulletin ID in our SCCM 2012 meta data list while we have already selected Critical updates and Security updates in classification list for Windows 7 and Windows 8 from products list of Software update point component properties.
Please let me know if i have missed something.
Please help.
Thanks
Mohit Kumar

Hi,
That’s very strange. How about re-run synchronization? Any changes?
If MS13-053 still cannot show up, you could also
download these updates manually, then deploy them.
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SCCM 2012 R2 unable to install Distribution Point on Windows 7

We have a SCCM 2012 R2 CU 2, single site. We would like to deploy the distribution point at 1 of the branch but hit with issues.
We tried various workaround. Reinstall IIS, manually install IIS.
We had repair WMI, and test WBEMTEST to the WMI and proof it able to connect, given security permission to everyone. Problem still persist.
The distmgr.log shows
CWmi::Connect() failed to connect to \\["Display=\\dpname\"]MSWNET:["SMS_SITE=sitename"]\\"dpname\\root\default. Error = 0x80070005
GetWMIObject - Failed to connect to root\default on ["Display=\\dpname\"]MSWNET:["SMS_SITE=sitename"]\\dpname\. Error code: 0x80070005
CDistributionManager::SetDpRegistry failed; 0x80070005
Anyone can help?

Hi,
Have you tried to disable firewall? Just for test.
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SCCM 2012 SP1 - Evil Folders in Reporting Services - What Are They and How to Remove Them

Hello All,
There are a lot of sub-folders in the http://CentralSiteSCCM/ReportServer. They are like:
<dir> Config_Mgr_CEN
<dir> Config_Mgr_CEN.OLD.0
<dir> Config_Mgr_CEN.OLD.1
<dir> Config_Mgr_CEN.OLD.10
<dir> Config_Mgr_CEN.OLD.100
<dir> Config_Mgr_CEN.OLD.1000
Only <dir> Config_Mgr_CEN is properly populated with the correct set of the default folders.
Would you be so kind to advise on:
What are they?
How to remove them?
What to do in order for them not to appear any more?
Thank you very much in advance!

Hi Mike,
I ran into an issue when I did the SP1 upgrade where a majority of our reports were duplicated. I created a script to delete these duplicate reports and I've adjusted it to work for your situation. You can find the original thread here, if you're interested:
http://social.technet.microsoft.com/Forums/en-US/configmanagergeneral/thread/dc9aa3b4-cea9-4a07-87ca-2795a2dbc04e
You'll need to know your SCCM site code and the server name to run this script.
# SCCM2012SP1-RemoveDuplicateSSRSFolders.ps1
# This script will connect to SSRS on a specified server and delete all folders that end with .OLD.*
# Used for SSRS cleanup after SCCM 2012 SP1 installation
# Script must be run from an account that has access to modify the SSRS instance
# 3/22/2013 - Mike Laughlin
# Resources used in writing this script:
# Starting point: http://stackoverflow.com/questions/9178685/change-datasource-of-ssrs-report-with-powershell
# API Documentation: http://msdn.microsoft.com/en-us/library/ms165967%28v=sql.90%29.aspx
# Previous script: http://social.technet.microsoft.com/Forums/en-US/configmanagergeneral/thread/dc9aa3b4-cea9-4a07-87ca-2795a2dbc04e
# Define variables
$SiteCode = ""
$serverName = ""
# Set the value of $noConfirm to $True only if you don't want to manually confirm folder deletion. Use with caution.
$noConfirm = $False
# Safeguard
If ( $SiteCode -eq "" -or $serverName -eq "" ) { Write-Host "Enter the required information for the SiteCode and serverName variables before running this script." -ForegroundColor Red -BackgroundColor Black ; Exit }
# Connect to SSRS
$ssrs = New-WebServiceProxy -uri http://$serverName/ReportServer/ReportService2005.asmx?WSDL -UseDefaultCredential
# Get a listing of all folders in SSRS
$reportFolders = $ssrs.ListChildren("/", $True)
# Find all folders containing .OLD.*
$foldersToDelete = $reportFolders | Where { $_.Name -like "ConfigMgr_" + $SiteCode + ".OLD.*"}
# Quit if no folders are found
If ( $foldersToDelete.Count -eq 0 ) { Write-Host "No folders with .OLD.* found. Quitting." ; Exit }
# Show a listing of the folders that will be deleted
Write-Host "The following folders will be deleted from SSRS on" $serverName":`n"
$foldersToDelete.Name
Write-Host "`nTotal number of folders to delete:" $foldersToDelete.Count "`n"
# Get confirmation before deleting if $noConfirm has not been changed
If ( $noConfirm -eq $False )
$userConfirmation = Read-Host "Delete these folders from" $serverName"? Enter Y or N"
If ( $userConfirmation.ToUpper() -ne "Y" ) { Write-Host "Quitting, folders have not been deleted." ; Exit }
# Delete the folders
$deletedFolderCount = 0
Write-Host "Beginning to delete folders now. Please wait."
ForEach ( $folder in $foldersToDelete ) { $ssrs.DeleteItem($folder.Path) ; $deletedFolderCount++ }
Write-Host "Folders have been deleted. Total number of deleted folders:" $deletedFolderCount
Standard disclaimer: While this script worked just fine for me in my environment, I make no guarantees that it will work anywhere else. I've attempted to make this script as user friendly and generic as possible, but it may require slight tweaking to work properly.

Is there Java API available for third-party integrations with SCCM 2012? I went through the "Developer's Survival Guide", and it seems that SCCM 2012 SDKs only support C# and PowerShell

Hi All,<o:p></o:p>
My team and I are developing a software using java that works closely with IT management software such as SCCM. Our software will be highly dependent on data stored in SCCM. Basically
our software will talk to SCCM to get information about a system managed by SCCM. To be able to do that, our software needs to use a java API that talks to SCCM. Is there a java API for SCCM 2012 that we can use? If there is not, what is the work around to
this issue (integrate a java project with SCCM SDKs)? Any help is appreciated! Thanks!<o:p></o:p>

Hi,
As you mentioned, it seems that there is no available Java API for SCCM .
Just curious, what's information you want to get from SCCM.
Based on my experience, you could query the SCCM site database to get almost all the information.
Otherwise, your question seems to be related to SCCM 2012. You may also choose to post there to get more effictive help.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SCCM 2012 R2 PXE Issue to Hyper-V VM Windows 7 and 8.1

Similar Messages

Maybe you are looking for