Schedule line qty

Hi,
In sales order, scheduling line tab, the confirmed qty is reqd else it gives error at delivery creation.
Client wants that it shall input qty only once. How can it be done?
Also whats the concept of scheduling lines (apart from help.sap)
regards
Shruti

Dear Shruti,
You will be able to create delivery for only conformed quatity of the schedulelines and on specific conformed date only.
Schedulelines will get conformed based on the availability of the material.
If there is no stock at present scheduleline will get conformed in the future date based on the replenishment lead time(time will to produce the material or to procure the material).
In scheduleline conformation process scheduleline categories will place a role.
Scheduleline categories determination will takes place based on these combination
Itemcategory+MRP type--->Scheduleline category
While creating sales order availability check will takes place based on this scheduleline will get conformed.
For example you have created sales for 100qty but only 50 qty avaialble at present for this system will conform 50 qty on present date remaining 50 qty will conform in the future date.
Suppose if you got the stock before that future date you can do the reavailability chek (by clciking on Availability check icon)to confrom the remaining 50 qty on earlier date.
I hope this will clear for you,
Regards,
Murali.

Similar Messages

  • Scheduling Line qty greater than the Scheduling agreement qty

    Hi Experts,
    1. I have a scheduling Agreement (SA), and the qty mentioned against this SA is 1000 (say).
    2. Now when i generate schedule lines for this SA (ME38), I am allowed to schedule more than the quantity that's mentioned in the SA.
    3. Please advise, is it possible to restrict this behaviour. i.e. I want to give an error message if the Schedule Line qty exceeds the SA qty.
    Please advise. Very urgent.
    Regards,
    Manju.

    Hi Manju,
    Yes its possible to restrict the case as u mentioned.
    Check the below settings:
    IMG-MM-Purchasing-Environment data- Define Attributes for system messages
    go to meassage no : 00-06-067 set it as Error message.
    U'll achieve ur result.
    Award points if its helpful
    Sangram

  • Schedule target qty is less than schedule line qty.....

    hi,
    please tell me can i avoid users to not to give schedule line qty more than target qty.....
    is it possible.....

    Hi friend,
    yes it can be possible.....
    there is a message for it,it may be a warning in your case.... just turn it to error,
    Go to spro--->Material management>Purchasing->Environment data--->define message systems...
    Go here select your message....it may be  some thing like M06xx
    select the message and turn it to error......
    Now while the user will crete a schedule line in Me38  he will not be able to create schedule line ....
    Hope it is usefull.....

  • How schedule line qty got changed?

    Hi,
    we observed there is a change in schedule line quantity. We have checked the change log in statistics but there is no record of change. We also checked in CDPOS for change record but there also there is no change record.
    As there is Firm zone maintained and the date is with in firm zone, i am not sure MRP run resulted in Schedule line Quantity change.
    Please suggest me how can i investigate who and how the quantity got changed.
    Thanks,
    Raghu

    Dear,
    Check this similar link: http://www.sapfans.com/forums/viewtopic.php?f=6&t=71921&start=0&st=0&sk=t&sd=a
    Hope this will helpful.
    Regards,
    Syed Hussain.

  • Delivery qty against schedule line

    Hi,
    I have specific requirement for a report where we need to determine the delivery qty against the schedule line qty for a sales order. In sales order in schedule line tab system shows the delivery qty. The field is VBEPD-VSMNG. VBEPD is a structure and I could not find the table in which this is actually stored. Does anybody know how to get the delivery qty for schedule line?
    Regards,
    Sachin.

    Dear Sachin,
    the delivery is always created in the ERP system on the item level. You cannot deliver a separate schedule line. This functionality does not exist.
    But if you go to the schedule line screen then the delivered quantity of the item will be distributed through all schedule lines which have the confirmed quantity. The distribution takes place starting from the earlier schedule line and goes to the later schedule lines and the delivered quantity ordered to a schedule line must be always not larger that the confirned quantity. If there will be undistributed rest of delivered quantity, it will be ordered to the last schedule line.
    This distribution takes place dynamically during the transaction VA02. The main program place here is the function module RV_SCHEDULE_CHECK_DELIVERIES.
    I hope, this information helps you further.
    Kind regards,
    Akmal Vakhidov
    Development Support SAP, Walldorf/Germany

  • Link between Delivery and Sales Order Schedule Line

    Hi Gurus,
    I have a requirement in which i need to display quantity and amount at schedule line level and also the delivery and delivery item for each schedule line.
    For example, if there is a sales order O1 and item 10 for which we have 3 schedule lines and 3 deliveries as well say D1, D2 and D3.
    Report should be something like this
    Sales Order    Item   Schedule Line    Delivery    Del Item   Confirmed Order Qty
    O1                 10      1                       D1           10            5
    O1                 10       2                      D2            10            5
    O1                 10       3                      D3            10            4
    How can i determine that a particular delivery corresponds to which schedule line of that saler order-item?
    We have the link between delivery and sales order but is there any way that we can get the link of delivery at schedule line level?
    Please help.
    Regards,
    Gaurav

    Hi,
    I suppose you must check with SD functional consultant and the post should also be in the logistics SD forum and not BI. But I suppose there is know specific link between the schedule line of SO to the Delivery. It is more like a bucket flow for ex.
    Sale order   Item    Schedule line  qty
    SO1            Item1     Sch1            10
    SO2            Item1      Sch2           10
    Delivery Item QTy
    DO1       IT1   15
    DO2       IT1    5
    In this case qty 15 is distributed over both SO1 and SO2, and SO2 ITem1 Sch2 has link to both the DOs
    So I am not sure if you can establish a one to one link, please check with your SD consultants.
    Regards,
    Ashwin G

  • Scheduling lines are not created in mrp running

    Line 1 & 2 are having same items with different schedule lines qty 250 & 275 nos. respectively. Stock was 250. System bokked stock 250 against line 1 & given proposed delivery date for line 2. In MM module, by running MRP system generated requirement only for 25 pcs.(may be it taken again stock 250 against line 2 in consideration while running MRP). This is happened in various cases.KINDLY HELP ME in solving this problem.
    REGARDS,
    G.V.SHIVAKKUMAR

    Hi,
    With my experience I will share something:
    1) Do you have valid Schedule Agreement?
    2) Have you entered Sch. Agreement number in source list?
    3) Have you selected MRP as " 2 " in source list?
    With your earlier checks, please chekc these also.
    Karthik Params

  • Delivery Status at Schedule Line level.

    Hi All,
    I have to retrieve some data on the basis of Schedule line for which delivery is not complete. Please find below the requirement.
    I am having one sales order with one line item which having two schedule line. For one schedule line confirmed qty is 1K and for other 2k. For first line item deliver qty is also 1k.
    I want to know how to check the delivery status for schedule line counter so I will get the idea that for first schedule line qty is delivered and for second not.
    Thanks
    Piyush

    Use the function module
      CALL FUNCTION 'RV_SCHEDULE_CHECK_DELIVERIES'
        EXPORTING
          fbeleg                        = wa_vbap-vbeln
          fposnr                        = wa_vbap-posnr
      FVERRECHNUNG                  = ' '
      FS073_ALT                     = ' '
      IF_NO_SORT                    = ' '
        TABLES
       fvbfa                         = fvbfa
       fvbup                         = fvbup
       fxvbep                        = it_vbepvb
      FVBLB                        =
        fvbap                        = fvbap
    EXCEPTIONS
      FEHLER_BEI_LESEN_FVBUP        = 1
      FEHLER_BEI_LESEN_FXVBEP       = 2
      OTHERS                        = 3
      IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    loop the internal table it_vbepvb.
    get the open qty in that schedule line
        MOVE wa_vbepvb-olfmng_flt TO wa_itab-openqty.
        IF  wa_vbepvb-bmeng EQ wa_itab-openqty.
    check that with the schedule line confirmed qty wa_vbepvb-bmeng
    If delivery is avaliable the open qty will not be equal to confirmed qty.

  • Print out of Schedule Lines & Material reqt at subcontractor end.

    Hi experts,
    Presently we are using ME9E report for taking print out of scheduling agreement.  In scheduling agreement, material wise / date wise R.M requirement at Subcontractor end is displayed as well as schedule lines material wise / date wise is displayed. 
    We do not find it user friendly.  We are searching for following reports :
    1. Datewise / Material wise requirement of R.M at subcontractor end should be displayed separately.
    2. Schedule line qty date wise / material wise  should be displayed separately.
    Solutions / Suggestions will be highly appreciated.
    Regards,
    ( Rajneesh Gulati )

    hi,
    pl go with Y program

  • Link between delivery line item and sales order item schedule line.

    Hello friends,
    This is a continuation of my earlier query - for which I got half the solution, and this is the remaining problem.
    I want to know: from delivery document line item, how to link it to sales order line item's schedule line (when there are multiple schedule lines with identical quantities).
    Thanks for your help.
    - Chetan

    This is the code which i used for the same purpose and its working.
    Hope this will help you too....
    ****it_itab  is my final internal table.
    *Internal table for manupulating the Delivery balance when
    *its used in more than one schedule line
    TYPES: BEGIN OF ty_new,
           vbeln TYPE vbep-vbeln," so no
           posnr TYPE vbep-posnr," so line no
           etenr TYPE vbep-etenr," schedule line
           delno TYPE lips-vbeln,"delivery no
           delposnr TYPE lips-posnr,"del item no
           totval TYPE vbep-wmeng," total del wise value
           val   TYPE vbep-wmeng," del wise used value
           sdval TYPE vbep-wmeng,"schedule wise  del used value
           sdtotval TYPE vbep-wmeng," total Schedule value
         END OF ty_new.
    DATA:it_new TYPE ty_new OCCURS 0,
         wa_new TYPE ty_new.
    DATA: it_vbepvb TYPE TABLE OF vbepvb,
            wa_vbepvb LIKE LINE OF it_vbepvb,
            fvbfa TYPE TABLE OF vbfa,
            fvbup TYPE TABLE OF vbup,
            fvbap TYPE TABLE OF vbapvb.
      LOOP AT it_vbak INTO wa_vbak.
        LOOP AT it_vbap INTO wa_vbap
                WHERE vbeln = wa_vbak-vbeln.
      SELECT * FROM   vbfa INTO TABLE fvbfa WHERE vbelv = wa_vbap-vbeln
                                             AND  posnv = wa_vbap-posnr.
      SELECT * FROM   vbup INTO TABLE  fvbup WHERE vbeln = wa_vbap-vbeln
                                             AND  posnr = wa_vbap-posnr.
      SELECT * FROM   vbap INTO TABLE fvbap WHERE vbeln = wa_vbap-vbeln
                                             AND  posnr = wa_vbap-posnr.
      SELECT * FROM   vbep INTO TABLE it_vbepvb WHERE vbeln = wa_vbap-vbeln
                                             AND  posnr = wa_vbap-posnr.
      CALL FUNCTION 'RV_SCHEDULE_CHECK_DELIVERIES'
        EXPORTING
          fbeleg                        = wa_vbap-vbeln
          fposnr                        = wa_vbap-posnr
      FVERRECHNUNG                  = ' '
      FS073_ALT                     = ' '
      IF_NO_SORT                    = ' '
        TABLES
       fvbfa                         = fvbfa
       fvbup                         = fvbup
       fxvbep                        = it_vbepvb
      FVBLB                        =
        fvbap                        = fvbap
    EXCEPTIONS
      FEHLER_BEI_LESEN_FVBUP        = 1
      FEHLER_BEI_LESEN_FXVBEP       = 2
      OTHERS                        = 3
      IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      SORT it_vbepvb BY vbeln posnr edatu.
      LOOP AT it_vbepvb INTO wa_vbepvb
                    WHERE vbeln = wa_vbap-vbeln
                      AND posnr = wa_vbap-posnr.
        to write data of schedule line with no delivery
        MOVE wa_vbepvb-olfmng_flt TO wa_itab-openqty.
        IF  wa_vbepvb-bmeng EQ wa_itab-openqty.
          CLEAR wa_itab.
          PERFORM schedule_data.  "schedule line based data to be displayed
          MOVE: wa_vbap-lgort TO wa_itab-lgort.
          MOVE: wa_vbepvb-etenr TO wa_itab-etenr,
                wa_vbepvb-bmeng TO wa_itab-kwmeng,
                wa_vbepvb-olfmng_flt TO wa_itab-openqty.
          APPEND wa_itab TO it_itab .
          CLEAR wa_itab.
        ENDIF.
        LOOP AT it_vbfa INTO wa_vbfa WHERE vbelv = wa_vbepvb-vbeln
                                            AND  posnv = wa_vbepvb-posnr.
          READ TABLE it_likp INTO wa_likp WITH KEY vbeln = wa_vbfa-vbeln.
          CHECK wa_likp-bldat >= wa_vbepvb-edatu.
    check the Delivery doc date with the schedule line confirmed date
          CLEAR: delbal, deltot,wa_new.
          LOOP AT it_new INTO wa_new WHERE vbeln = wa_vbepvb-vbeln
                                         AND       posnr = wa_vbepvb-posnr
                                         AND       etenr = wa_vbepvb-etenr.
            deltot = deltot  +  wa_new-sdval.
          ENDLOOP.
          delbal = wa_new-sdtotval - deltot.
          CHECK sy-subrc <> 0 OR delbal GT 0.
          MOVE wa_vbepvb-olfmng_flt TO wa_itab-openqty.
          CHECK  wa_vbepvb-bmeng NE wa_itab-openqty.
    ****To check whether this delivery is already fully allocated against
    any other schedule.
    LOOP AT it_lips INTO wa_lips WHERE  vbeln = wa_vbfa-vbeln
                                           AND posnr = wa_vbfa-posnn.
            MOVE: wa_likp-bolnr TO wa_itab-vesname.
            MOVE: wa_likp-vbeln TO wa_itab-delno.
            MOVE: wa_likp-wadat TO wa_itab-wadat.
            MOVE: wa_likp-anzpk TO wa_itab-anzpk.
            MOVE: wa_likp-lddat TO wa_itab-lddat.
            MOVE: wa_likp-ernam TO wa_itab-ernam.
    ******end of code added by IVL1 on sep 27 2007 #3618
            PERFORM schedule_data.
            IF wa_lips-umvkz <> 0.
              tempquant = wa_lips-umvkn / wa_lips-umvkz.
            ELSE.
              tempquant = wa_lips-umvkn. "delivery qty
            ENDIF.
            tempquant = tempquant * wa_vbfa-rfmng.
    ***New logic added to get delivery qty schedule wise****
            MOVE: wa_vbepvb-etenr TO wa_itab-etenr,
                  wa_vbepvb-bmeng TO wa_itab-kwmeng,
                  wa_vbepvb-olfmng_flt TO wa_itab-openqty. "jo
    **if delivery qty is less than or equal to schedule line qty******
            IF tempquant LE  wa_vbepvb-bmeng.
              wa_itab-delqty =  tempquant.
              LOOP AT it_new INTO wa_new  WHERE  vbeln = wa_vbepvb-vbeln
                                         AND     posnr = wa_vbepvb-posnr
                                         AND     etenr = wa_vbepvb-etenr
                                         AND     delno  = wa_lips-vbeln
                                         AND     delposnr = wa_lips-posnr.
                MOVE-CORRESPONDING  wa_itab TO wa_new.
                wa_new-delposnr = wa_lips-posnr.
                wa_new-val = tempquant.
                wa_new-totval = tempquant.
                wa_new-sdval  = tempquant.
                wa_new-sdtotval = wa_vbepvb-bmeng.
                MODIFY TABLE it_new FROM wa_new .
                IF NOT sy-subrc IS INITIAL.
                  APPEND wa_new  TO it_new.
                ENDIF.
              ENDLOOP.
              IF sy-subrc <> 0.
                MOVE-CORRESPONDING  wa_itab TO wa_new.
                wa_new-delposnr = wa_lips-posnr.
                wa_new-val = tempquant.
                wa_new-totval = tempquant.
                wa_new-sdval  = tempquant.
                wa_new-sdtotval = wa_vbepvb-bmeng.
                APPEND wa_new TO it_new.
              ENDIF.
             wa_itab-delqty =  tempquant.
             CLEAR tempquant.
            ELSE.
        lips qty > so schedule lineqty
              CLEAR deltol.
              LOOP AT it_new INTO wa_new WHERE    vbeln = wa_vbepvb-vbeln
                                          AND      posnr = wa_vbepvb-posnr
                                         AND     etenr = wa_vbepvb-etenr
                                          AND     delno  = wa_lips-vbeln
                                          AND    delposnr = wa_lips-posnr.
                deltol = deltol  + wa_new-val.
              ENDLOOP.
              LOOP AT it_new INTO wa_new  WHERE    vbeln = wa_vbepvb-vbeln
                                          AND      posnr = wa_vbepvb-posnr
                                          AND     delno  = wa_lips-vbeln
                                          AND    delposnr = wa_lips-posnr.
                MOVE-CORRESPONDING  wa_itab TO wa_new.
                wa_new-val = wa_new-totval - deltol.
                wa_itab-delqty =  wa_new-val.
                wa_new-delposnr = wa_lips-posnr.
                wa_new-totval = tempquant.
                wa_new-sdval  = wa_new-val.
                wa_new-sdtotval = wa_vbepvb-bmeng.
                MODIFY TABLE it_new FROM wa_new .
                IF NOT sy-subrc IS INITIAL.
                  APPEND wa_new  TO it_new.
                ENDIF.
              ENDLOOP.
              IF  sy-subrc <> 0.
                MOVE-CORRESPONDING  wa_itab TO wa_new.
                wa_itab-delqty =  wa_vbepvb-bmeng.
                wa_new-delposnr = wa_lips-posnr.
                wa_new-val =  wa_vbepvb-bmeng.
                wa_new-totval = tempquant.
                wa_new-sdval  = wa_vbepvb-bmeng.
                wa_new-sdtotval = wa_vbepvb-bmeng.
                APPEND wa_new  TO it_new.
              ENDIF.
            ENDIF.
            IF NOT wa_lips-lgort IS INITIAL.
              MOVE: wa_lips-lgort TO wa_itab-lgort.
            ELSE.
              MOVE: wa_vbap-lgort TO wa_itab-lgort.
            ENDIF.
            APPEND wa_itab TO it_itab .
            CLEAR wa_itab.
          ENDLOOP. 
        ENDLOOP.
        CLEAR wa_vbepvb.
      ENDLOOP.
        ENDLOOP.
        CLEAR wa_vbak.
      ENDLOOP.

  • Delivery is not possible as per Schedule line dates

    Hi Gurus,
    The schedule lines insales order are for eaxample---
    01.12.2008  -   10 pieces (quantity)
    15.12.2008  -   10
    10.01.2009  -   10
    25.01.2009  -   10
    Tried to deliver the quantity 10 dated 15.12.2008 in the last after all the materials pertaining to other dates are delivered, but system is throwing error as no schedule lines for dated 15.12.2008. But when i checked, delivery is not done for 15.12.2008 and the rest are completed.
    But system allows to deliver the balance 10 quantity either on 25.01.2009 or on a future date but not on 15.12.2008 on which delivery was not done.
    What could be the reason????
    Thanks for your help
    MM

    Hi
    When I see the schedule line in the sales order where in the qty in the delivered qty column (second column from the confirmed qty column) is updated item wise irrrespective of the delivery done as per scheduleline date.
    It means though the delivery and PGI is not done for the date 15.12.2008, but the qty in the delivery qty column is updated and the balace to to be delivered shows for the last date.
    So here iam able to deliver only on the last date i.e. 25.01.2009 or at a later date for the schedule line date missing in between and not on the specific date.
    Is this how SAP standard works - I was wondering why i cannot deliver any schedule line qty and date later after delivering quantities of the subsequant schedule lines.

  • How to get the Deliver Quantity against Schedule Line Quantity

    Hi,
    I have specific requirement for a report where we need to determine the delivery qty against the schedule line qty for a sales order. In sales order in schedule line tab system shows the delivery qty. The field is VBEPD-VSMNG. VBEPD is a structure and I could not find the table in which this is actually stored. Does anybody know how to get the delivery qty for schedule line?

    Hi,
    U can check the following tables:
    VBEP (Sales ScheduleLines) VBEP-VBELN =VBAP-VBELN and VBAP-POSNR = VBEP-POSNR
    LIPS (SalesDoc:Delivery Items) LIPS-VGBEL =VBAP-VBELN and LIPS-VGPOS =
    VBAP-POSNR
    VBEH (Schedule LineHistory) VBELN POSNR ETENR
    Regards
    Kannaiah

  • Display msg when Schedule line is changed

    Hi Experts,
    I have a requirement that when Schedule line qty is made zero then an error msg should be displayed.
    Msg should be displayed as soon as qty is made 0 and enter is pressed and at the time of saving it.
    I have tried to code in User exit field_modification, but still it does not work.
    Plz suggest the way in which this can be achieved.

    This code is in MV45AFZZ:   userexit_field_modification.
    DATA: v_days TYPE VTBBEWE-ATAGE,
           vbep_edatu  Type VTBBEWE-DBERVON,
           V_sydat     TYPE   VTBBEWE-DBERBIS,
           n type N,
           V_change type c value 'N'.
    constants: c_item_cat type string value 'TAPA'.
    Data : ls_vbap_posnr type string.
    DATA : LIT_VBAP type STANDARD TABLE OF VBAP with header line ,
             WA_VBAP TYPE VBAP.
    DATA :LIT_OLD_VBEP type STANDARD TABLE OF vbep WITH HEADER LINE,
             WA_VBEP TYPE VBEP.
    check sy-uname = 'CCHAUHA1'.
    *SELECT VBELN POSNR ETENR LFREL EDATU WMENG  FROM VBEP into CORRESPONDING FIELDS OF TABLE LIT_OLD_VBEP
       WHERE  vbeln = xvbep-vbeln.
    *SELECT KEVER FROM VBAP into CORRESPONDING FIELDS OF TABLE LIT_VBAP
    WHERE  vbeln = xvbep-vbeln.
    IF SY-TCODE ='VA32'AND  XVBAP-PSTYV = 'TAPA' and VBAK-VBTYP =  'E'
                        and vbak-auart = 'ZLZ' OR vbak-auart = 'ZLP'.
    *Loop at xvbep where VBELN = xvbep-VBELN.
          V_sydat = sy-datum.
         vbep_edatu = xvbep-edatu.
         CALL FUNCTION 'FIMA_DAYS_AND_MONTHS_AND_YEARS'
           EXPORTING
             I_DATE_FROM = V_sydat
             I_DATE_TO   = VBEP_EDATU
           IMPORTING
             E_DAYS      = v_days.
         IF  v_days > 0 and v_days <= WA_VBAP-KEVER
                        and  VBAK-VBTYP =  'E'
                        and vbak-auart = 'ZLZ' OR vbak-auart = 'ZLP'.
             READ TABLE lit_old_vbep INTO wa_vbep index sy-tabix.
           IF wa_vbep-WMENG ne xvbep-WMENG ."and xvbep-posnr eq lS_vbap_posnr.
             MESSAGE 'Quantity zero not allowed ' TYPE 'E'.
            ENDIF.
         endif.
        ENDLOOP.
    *ENDIF.

  • Need to cancel the schedule line

    Dear all,
    Please advice me, for stock model meaning SO stock is not tied with SO, it will be in Unrest, stock. this scenario i need to cancel the Schedule line qty for confirmed SO & need to assign for Unconfirmed SO which delivery date is near to the Current date.

    Hi
    Backorder processing helps you in this event. Use transaction V_V2. In that give the material number and plant.In the options select sales document and uncofirmed documents required.and below select the priorities of sales document and deliveries.
    Reward if this helps.
    Regards
    Simu

  • Block the Schedule line for Delivery

    Hi,
    I have a requirement in which I want to block the schedule line in my sales order for delivery.
    Also I want that system should not perform the availability check and block the stock on the requested delivery date.
    We want the order handler to take a desicion and remove the block, and then the item should be relevant for availability check.
    To cover the 1st req of keeping the block, I will use a schedule line cateogry which has a delivery block setup in IMG.
    Will setup the schedule line cateogry accordingly.
    But I am not sure how to achieve the 2nd req to not to confirm the schedule line qty till the block is there.
    Kindly advise.
    Regards,
    Harsh

    Hi Harsh,
                 2 ways to achieve this,
    1- Create new reason for rejection & you can stop the requirements to flow to MD04. ( assumption is, item will be waiting for further activities by the Order handler )
    2- Tx: OVB8 & OVB5
    check whether you can include your own logic which is applicable only for newly created delivery blocks. This transactions works well for Delivery block "01"- credit block- for not to transfer requirement to MD04.
    Hope it may work for you.
    Regards,
    ReazuddinMD

Maybe you are looking for