Script UCCX. Outbounds

Hello,
I need to implement a script with uccx editor to make multiple outbound calls to diferents phone numbers. In the outbound subsystem of uccx can introduce the phone numbers in a .txt archive and then use a csq agents, but now i need to use a prompt .wav in the outbounds calls. Have i to use an script or can i implement this with the outbound subsystem? How can i introduce more than one phone number in the "Place call"?
Regards

Hi Antonio,
If you want to play a .wav, then you will need a custom script. you can take the phone numbers from a XML document or a database query.
Gabriel

Similar Messages

UCCX Outbound Option - What needs to be configured besides UCCX Outbound config

I'm trying to setup Outbound Option for UCCX 10.0. Unfortunately my knowledge in VoiceGateways isn't really deep. What I'm wondering is:
1) On progressive mode: Do I need to add some components (e.g. VGW) to CUCM first or is UCCX talking directly to the VGW?
2) On direct preview mode: Even if I havn't configured CUCM (if needed) and VGW properly, an outbound call should be suggested to the agent anyway before dialing, is this correct (if UCCX Outbound Option is configured well of course)?
Thanks for every response
Elias

btw: we're using finesse, not CAD

UCCX Outbound Question

Hi All,
I am trying to implement and test outbound option in UCCX. Have few queries regarding that.
we make only CUCM initiated calls to UCCX and dont have a PSTN connection.
1. How to configure UCCX outbound in this case.
2. How to use Phone in same CUCM as customer and Agent.
if possible kindly guide me how to implement it.
With Regards,
Raja Raman

Only if you modify the report to add an additional filter via the stored procedure or Crystal. The general concept of custom reports is somewhat explained in the Historical Reporting Administrator and Developer Guide. It doesn't hold your and through it though; I suggest finding yourself a DBA or Crystal Reporting resource before attempting this.

Import Contacts in UCCX Outbound

Hi,
Whether any mechanism to schedule to read the contacts to be imported for UCCX Outbound instead of importing the contacts list each time manually.
Please help

The provisioning API introduced with 9.0 is how you'll do it. I don't recall whether contact managment is in the 9.0 revision of the API or is being added in 10 though.
https://developer.cisco.com/site/tech/communication-collaboration/contact-center/uccxapi/overview/
Please remember to rate helpful responses and identify helpful or correct answers.

Uccx outbound script & .txt file

Hi all,
I have a file (.txt) to import contacs to outbound. This file have: name, lastname, phone, account. I would like to play a prompt depends of account field.
How to get this field into variable in a script to use this way.
Which is you recomendation?
Regards,

following query returns no output
"select concurrent_program_name, multi_org_category
from fnd_concurrent_programs
where concurrent_program_name = <concurrent short name>"
I have tried to run from the UKHRMS responsibility as well but the report is still giving me the same results i.e. 0 .
pls note that the following SELECT commands do not give any out put ... i.e. after running the concurrent request from the application end.
select rpad(rtrim(name),40)||' '||rpad(nvl(account_number,' '),16)||' '||
substr(to_char(amount,'0009999999.99'),-13)||' '||
rpad(rtrim(bank),35)||' '||lpad(nvl(branch_code1,' '),2)||lpad(nvl(branch_code2,' '),2)||lpad(nvl(branch_code3,' '),2)||' '||
lpad(nvl(branch_code1,' '),2)||lpad(nvl(branch_code2,' '),2)||lpad(nvl(branch_code3,' '),2)||' '||
rpad(nvl(branch,' '),35)||' '||
rpad(rtrim(employee_number),6)||' '||payday
from xx_banks_direct_payments
order by bank, branch_code1,branch_code2,branch_code3, name
select bank, lpad(rtrim(count(employee_number)),4)||
' '||substr(to_char(sum(round(amount,2)),'999,999,999,999.99'),-13)
from xx_banks_direct_payments
group by bank
order by bank
select ' Totals: Number of Employees: ' ||' '||count(employee_number)||' '||' Amount:' ||' '||substr(to_char(sum(round(amount,2)),'999,999,999.99'),-13)
from xx_banks_direct_payments
pls help

CUCM & UCCX Outbound pre-recorded message

Hello,
I have a customer that records all the calls that enters and exits some extensions in CUCM.
By legal request, and since he has a UCCX when a call arrives to those extensions I managed to route the call to UCCX, play a message like "your call will be recorded" and then forwarded to the extension.
Now the problem is that the customer also wants to do this automaticaly on outbound calls, i.e, extension 1111 calls outside number 222222222, he wants that 222222222 when answers listens the message "your call will be recorded" and then when the message ends, the call will be estabilished between 1111 and 222222222.
Is it possible to do that with the equipment that the customer have?
CUCM: 8.6.2.200000-2
UCCX: 8.5.1.11003-32
Thanks in advance...

Awesome Anthoney, thank you very much. I was about to reply after having some issues, though I managed to get it working and the Trigger Application step mixed with two seperate scripts\applications (a triggering script with this step and a script with the actual outbound steps) did the trick.
Thanks again

UCCX Outbound Campaign(Preview) Reports

Hi All.
I am configuring outbound(preview) campaigns on UCCX 8.5SU3. Once the campain is done, is there any defult report in which I can see the status of each contact of the campaign such as successful, not dialed yet, invalid number etc?
Many thanks in advance!
Dhammike.

Hi
I'm afraid not - it should be feasible to create a custom report for this purpose though.
Aaron

Scripting UCCX 9to Unity Connection 9 Directory Handler

My customer wants the voice enabled directory handler in Unity Connection 9.x but they do not want the "if you know your parties extension, you may dial it at any time" part. My question is, is it possible to create a UCCX script to answer and provide a menu that, among other things, forwards the call to the directory handler but hits the 4 key to go directly to the "who do you want to call?" prompt so the caller never actually hears the part about knowing your parties extension?
Yes is seems petty and trivial however....

Sure. You an also build customer call handlers and directory handlers in Unity and record any prompt you want, so not sure why you would want to do it in UCCX unless you have some more advanced requirements, i.e. massage digits, lookup stuff via XML, DB, etc.
HTH,
Chris

Mark call as callback in Cisco UCCX outbound

Hi,
I am using Cisco UCCX 10.0. I configured outbound system in uccx and calls are offering to agents.
Anybody please help how a call can be marked as callback in uccx.
Also whether i can update the result of the call; for example: I am running a campaign for credit card. Whether i can update any where that what each customer responded.
Please help

Anybody please help how a call can be marked as callback in uccx.
The agent has a Callback button in CAD while the call is connected to setup the callback. The callback window defined on the campaign will decide how much slack on either side of the desired callback time system will offer that preview call to an agent. Also, the missed call behavior defines what happens if the subsystem cannot find an agent within the window.
Also whether i can update the result of the call
The call result is set to Voice (i.e. customer responded) by default unless an agent Reclassifies the call. Again, this is a button in CAD. The Admin Guide defines what will happen for all of the other result states.
Please remember to rate helpful responses and identify helpful or correct answers.

UCCX Outbound configuring

Good day!
I try configure outbound campain on UCCX
8.5.1.11003-32
UCCX call customer but does not pass RTP. We use SIP trunk beetwen VG and CUCM.
When we call to RP from internal phone we can hear IVR. Outbound Campign use same application.
What could be the cause?
Other call through this VG and SIP trunk work fine.
I have attached debug ccsip from VG and shr run.

I had the same issue.
It seems that it's related to the CPA support of your SIP Gateway.

UCCX Outbound IVR Port License Requirements

Hi, trying to figure out how many Outbound IVR port licenses are needed.
UCCX dials out, call is answered with a live voice, UCCX transfers to Application Trigger. No agent available, call is queued. At this point 1 Outbound IVR license is used.
Agent becomes available and call is transferred to Agent. At this point is the licensed port returned or is the license consumed until the agent hangs up?
Thanks.

Hi Chris
I dont think the outbound license will be held till agent answers the call.
Here's when outbound licenses will be released:
1. Outbound subsystem calls a contact, live voice is detected, dialer does a refer to agents extension via gateway-sip trunk - CUCM. At this point, outbound port is free and agent takes the call
2. Outbound subsystem calls a contact, live voice is detected, dialer does a refer to IVR trigger. Outbound port is released. Here, the outbound contact is now connected to one of the inbound CTI ports which are associated to the IVR trigger
In summary, as soon as outbound port does a successful SIP Refer transfer, the outbound port is free to be used for next contact.
Regards
Shikhar

Overview scripts UCCX 7.X

Hello,
Is there an easy way to get an overview of all the scripts that are being used in UCCX 7.X
We see the need to document alot of them
Kind Regards,
Yannick Vranckx

Well,
At this very moment making an overview of the script + the settings in an excel with the information from the applications in UCCX7.X.
When this is done, calling each script to determine the flowchart in Visio, so a bit of backtracking

Error while changing a script / UCCX 8.5

Hi,
While trying to change scripts last night I got the following error DBMgr:delete:failed: file name java.sql.SQL.Exception: Could not position within a table (informix.scriptsfiletbl)
I have never encounterd this error. This morning it seemed to have work fine. Anyone know what that error means?
Thanks,
AJ

Hope you already tried: ls -l /export/home/tools/solaris/env/mainsoft/../mwver/mwversion.ini If ls returns the file name, try running the script under truss to find some clues.
% truss -f -vall -rall -wall -o /tmp/mwpatch.log sh vmw502_sunos5_HF*

UCCX Outbound CCDR Report

On the Agent Outbound CCDR Report there are 18 Call Results.
There are a few that the system can not detect:
5—Customer does not want to be called again.
6—Call connected, but wrong number.
7—Call connected, but reached the wrong person.
8—Customer requests callback. This is not applicable for IVR-based outbound campaigns.
I understand #8, there is a callback button for the agent to schedule the callback.
How does the system know when 5,6, or 7 occurs?

Hi
http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/cust_contact/contact_center/crs/express_10_5/user/guide/cadx105-agent-desktop-user-guide.pdf
page 45 onwards suggests the agent can select:
'Reclassify' allows selecting 'do not call' (presumably 5)
'Skip-next' then 'wrong number' (i.e. reason 6)
'Skip-next' then 'not home' is presumably 'wrong person' (i.e. wrong person, right number - reason 7)
I've not used preview OB for a while, so may be wrong... but I'd test those outcomes.
Aaron

Beep while transferring to agent from icd script UCCX 8

Callers from ICD script hears a beep instead of a ringback while ringing on agent phone/desktop. Can we change it? Thank you.

What Network MoH source have you got set on your CTI ports? - am guessing that nothing is set.
Create an MoH source using a wav recording of a ringing phone then apply this to the network MoH of your CTI ports ans your callers whould hear a ring phone when the call is transferred to an Agent

Script UCCX. Outbounds

Similar Messages

Maybe you are looking for