See the costcenter in costing run analysis

HI,
I have executed a costing run. I want to see the cost-center involved in the same.
How can I see it. The analysis tab in CK40N is disabled. Can some body throw
some pointers reg: this
Regards
Rudra

Hi Ajay,
Thanks for the quick answer.
When I check in CK13N. I can see the costs tab, which shows the cost component view.Then If I double click a row, I
see the cost components. But I could not find the cost center in the same. Can you please oet me know where exactly I can find the same.

Similar Messages

How do I get to see the procedures that are running?

Good afternoon. How do I get to see the procedures that are running?
Thanks.
Daniel Sousa

I agree with Billy: never use undocumented procedures, they can change anytime.
The link you were referring to is probably this one: http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:767025833873 and the post was not from Tom Kyte but from a reviewer.
The comment from Tom was:
sorry -- x$ tables are magical and I give no help in that area at all.
The same user that posted the query added in a following post:
Tom, I agree 101% - X$ are "magical", they CAN and WILL change anytime, without warning, and worse, NO READ-CONSISTENCY here - so, in a very busy db, chances are of X$ being "late", not refreshed, or alike.
Regards.
Al

At the time of cost run CK40N, cost relese in previous month.

Hi,
At the time of cost run CK40N, executing today or previous (05.04.2010). But Cost release in previouse month 31.03.2010.
I tried but system not allowing and saving the varient in previous period(31.03.2010).
Please provide solution and little biturgent.If any clarifiaction ask i will explain in detail.

Hi Sreekanth,
We also faced the same issue with CK40N costing in previous month. What happened is that during testing in quality the new month started and the system is not allowing back date release. So we have to now open and close periods in MMPV and OB52 which is not possible because MM postings are pending. So the new costing release has to be carried after opening and closing of periods.
Syed Abid Hussain
Edited by: sabidh on Apr 5, 2010 2:45 PM

Can PMAC be run Daily and Can we see the Batch Update Cost Daily?

Dear Gurus,
My Client wants to see Daily Updated Cost each end of day Through PMAC. Is it possible to run daily and Can we also see the COGS too.
Now we have a Requirement here :
My Clinet During the Production Process uses : Boiler Fuel, Chlorine, Electricity, Caustic Soda,Chain Lube, Generator Diesel.
They would like to see each day how much has been consumed along with the cost during the Production Process at each end of the day and apportion the above things to all across the batches as per their KPIs (Key Performance Integrator).
Now the challenge we cant take these Parameter as ingredients in Formulas. So Please guide us in providing the solution.
They also informed us that they can not give these things in Hourly Basis. So Please Provide us the solution how to take this parameters to derive COGS..
Please advice me.
Regards,
John

Dear John,
In Actual costing, PMAC, by definition, derives the weighted average rate only at the month end. You can refer to last period cost as a reference to perform Batch Cost SIMULATION (COGM). Same is the case with simulated COGS.
Now coming to the problem of Cost Allocation. Let us discuss various options.
Option1: FOH - Let us start with the simple one:
- Consider all the indirect mfg. expenses as a Cost Component - Factory Overheads.
- Derive standard rate (FOH/Unit) and apply it to onto products based on cost driver such as Production Volume cost components.
- Once FOH applied for the last period, current period can use this as reference.
Option2: Machine Recovery Rate, Utility Cost - Now let us try bringing in more precision by effective use of Routing definitions in Recipe:
- You have mentioned that we cannot consider cleaning material, Utilities (Electricity, Water, Fuel) as a part of formula. So we consider Routing to absorb such cost (Equipment Cost, Utility Cost, Cleaning Material Cost) associating the Unit Rate to various activities in the Operations.
- Define separate Cost Components - Equipment Cost, Utility Cost
- With this definition, you will able to absorb the major part of the factory overheads in the production batches.
- Rest of the indirect mfg. cost can be allocated onto the products as in option 1 at the month end @ actuals.
This is very interesting topic from Activity Based Costing view point. Let us request cost accountants to contribute to this discussion.
Regards,
Sanjeev

What's the report to see the result after we run KSUB ?

Dear All,
Could you kindly help me ?
I'm new for FI-CO .
If i'd like to run assessment, and in the cycle I use Receiver Rule: Variable portion and type is Plan SKF . The sender will be cost center and receiver is WBS Group.
Afterward, I run KSUB to run cycle.
And I'm keen to see the result after doing the assessment, what's the report for it ?
Could somebody tell me ??
I wanna see the result from allocation ( type assessment). What's the report for it ?
Thanks a lot.
Have a good day,
Best regards,
Daniel N.

Hi,
the sender / receiver relation and the values are reported after executing KSUB.
Another possibility is to execute KSB1 report for the sender cost centers and the assessmnet cost elements for the assessment period. Create a layout where the receiver (=partner object) is displayed.
Best regards, Christian

Error in the Transaction CK64 - Costing Run (CK 318 and CK 361)

Hi Everybody,
Please, when I use the transaction CK64 to costing run, i see the following message of error:
1) First Error: CK 318
CK 318 - Cost estimate for material & contains errors -> Planned price
CAUSE
When an assembly was valuated, the system found that the cost component
split of material component &V1& from plant &V2& contains errors.
SYSTEM_RESPONSE
The cost component split with errors is not changed. Instead,
valuation is carried out with a price from the material master. This
result goes into the cost rollup. This happens so that the costing
result of the finished product is still meaningful.
</>Note</> The subsequent valuation is always with valuation variant
&V3&. Valuations with a manual cost component split are not taken
into account. This affects the following two cases:
strategy '8': valuation with manual cost component split
the possibility to calcualte manual cost component splits in addition
to the valuation strategy entered.
WHAT_TO_DO
Analyze the cost component split with errors and solve them.
Where can I found the "cost component split"? Would be a information of Data master material (MM03)?
2) Second Error: CK 361
Value of costing item & in itemization is 0
CAUSE
The cost estimate for the assembly contains item &V2&, which has no
errors, but was costed with a value of zero.
WHAT_TO_DO
Please check item &V1& in the itemization of the assembly concerned.
Where can i found this information of itemization??? I was looking in the data master of the material but i can't find.
Please, how can I solve this problems?
The status of the costing run for this materials is "KF - Costed with errors"

Thank you Rob. I guess our only option is to call each steps of CK40N by separate transactions. Do you know why when calling CK64 (costing) in background, the transaction in BDC will automatically change to CK40N even CK64 is hard-coded?
Thank you very much for your advice.
Minami

Do we have a way to see the diffence b/n running & start-up config in FM GUI

Hello
Do we have a way to see the diffence between running & start-up config in FM GUI similar to show running-config difference in CLI. I understand that when activating the zoneset the differneces are shown, however if there are other changes made how can the difference b/n ru & start be viewed in GUI (FM)
Please advise
Thanks
Chetan

This one might help.
Allow configuration of Automatic Updates in Windows 8 and Windows Server 2012
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

I have imported my I photo library into Aperture. all the old i photo events are now in the aperture library showing number of photos but when clicked none display. I can see the photos if i run the cursor over the project. Help please.

I imported my i photo library into aperture.
I can see the i photo events in aperture library as events with the number of photos in each event.
When you click events in the aperture library no photos appear although if you roll the cursor over the event icon it show the photos. If you click on the event either on the event icon or in the library no photos appear.
Help

Check, if you have any filters set. The search fields in the Insector panel and the browser should be showing "All items" or "Showing All".
The Browser search field could be set for each project and album individually, so you have to check it for each project.
Regards
Léonie
For example: The projects count shows "20 items", but the browser is empty, because the project's filter is set to show only rejected items.

Why don't I see the popup option to RUN when I try to download a file under Firefox that I get in Internet Explorer which is where I turn to to download a program ?

In Internet Explorer I always get the popup options RUN, SAVE, CANCEL. In Firefox I only get SAVE & CANCEL. When I click SAVE a "binary" file gets downloaded but I don't know what I'm supposed to do with that.
Thanks for your help

Firefox only allows you to save executable files. If you want to add an option to run them you can use the OpenDownload² add-on - https://addons.mozilla.org/firefox/addon/opendownload-10902

Is there a way I can see the status of a running stored procedure?

I have a stored procedure that takes quite a bit of time and I was wondering if there is a way I can monitor it's status?
Thanks!

One thing you can do is add some calls to dbms_application_info to your procedure.
Then you can monitor the progress by querying v$session.
More info here:
http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/d_appinf.htm

Report to see the actual cost and Revenue..

Hi all,
My Sales Cycle is Sales Order --> Delivery --> PGI --> Invoice --> and Accounting.
When we do the PGI GOGS account entries will generate,
When we do the Invoice Revenue and customer account entries will generate.
Now my customer wants to see the total Actual cost as well as total revenues in a single report (Sales order wise).
Is there any Standard report availble for this?????
Thanks and Regards,
SUBBU..

Hi,
You will have to use LIS and develop a std or flexible analysis to develop this report.
Check the below links
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOLIS/LOLIS.pdf
http://help.sap.com/printdocu/core/print46c/en/data/pdf/LOLIS/LOLIS_KOMPONENTEN%20DES%20LIS.pdf
Regards,
Amit

Seeing the detailed sql with db table names for an analysis in OBIEE 11g?

Hello All,
I am trying to see the detailed sql for an analysis to see which tables my analysis is hitting back in the database. Currently all i see is the subject area name with bunch of s_0, S_1,S_2.... but i want to see the actual table names which the Analysis is pulling the data from, I am new to OBIEE. Any help or advise with the steps in order to accomplish my goal is greatly appreciated.
Thanks,
Ravi.
Edited by: user1146711 on Aug 23, 2011 3:24 PM
Edited by: user1146711 on Aug 23, 2011 3:30 PM

Hi ravi,
You can check in the presentation services by going to Administration/manage session/view log for the specific report that you are running.
You can even check the SQL in log file NqQuery.log in your installation folder C:OracleBI\server\log\NqQuery.log
Check this Courtesy by gerard http://gerardnico.com/wiki/dat/obiee/manage_session_log
hope answered.
Cheers,
KK

To see the cost of production order after settlement to header material

hello guys,
   In make to stock,we settle the total cost of prodution order on header material,right(if we keep as the default rule( distribution rule in order type)?
     If i want to see that cost of production order which we settled against the header material,where should i check it?should i check in material account or somewhere else?
         Thanking you guys in advance.

Dear,
There is a little missunderstanding in your thought.
If the material of price control S, When you do the GR, the STD cost of material is deducted from production order cost, then when you settle the production order, the variance is settled to variance account/PD account. hence the production order cost balance is zero.
Example- Production order cost is 60000
After GR the production order cost balance is 60000-50000 = 10000.
After settlement production order cost balance is zero.
Now your question is where can i see the production order cost?
You can see the production order cost in the production order itself.
In the production order...cost disply option just filter the origin with test settlement and GR.
Then total up the cost, then you can see the cost as 60000.
please come back if you need more help.

How to see the SQL running in back ground when we genarate a report.

Hi All,
I am new to Oracle Reports Builder toll and I would like to see the SQL query/script running in back ground when we run any perticular report using Reports Builder 10g.
Please help me with this query, Thank You Very much for your help in Adv.
Thanks,

Hi,
well the only option you can try is enabling trace from Builder (Program --> Tracing --> ALL) and then from the OS keep checking the trace file being created when the report is running. Something like the following will be recorded.
example
10:14:18 APP .. ( Repeating Frame R_G_EMPNO
10:14:18 APP ... ( Group G_EMPNO Local Break: 0 Global Break: 0
10:14:18 APP .... ( Query Q_1
10:14:18 SQL EXECUTE QUERY : select * from emp where deptno=:x
Bind Variable Value
X 10
10:14:18 APP .... ) Query Q_1
10:14:18 APP ... ) Group G_EMPNO
10:14:18 APP ... ( Text Field F_DEPTNO
Hope this helps
Roberto

Report to see the OverHead Posted Production Order wise

Dear SAP Gurus ,
I request you to kindly guide me as what Tcode is available to see the Over-Head Cost booked related details (prefearably along with the Production Order number) .
Regards
B Mittal

Hi,
Transaction CO03
Menu Path: GoTo >Cost > Analysis
Another cost report for production orders is transaction KKBC_ORD
regards,
R.Brahmankar

See the costcenter in costing run analysis

Similar Messages

Maybe you are looking for