Select UNUSED Audio - Not Working Correctly

Hey Logic X users...
Anyone having issues with "select unused audio" and deleting it? It seems to also grab audio being used in the session - which never happened in previous versions. I also tried it in several projects and have the same problem.
Prior to archiving a session - or when it gets too big - I always did the following:
1. "Select UNUSED" Audio
2. "Move Files" to an unused audio folder I have on my drive
3. Delete files from session (which left them in my unused audio folder I created but removed them from the project folder.
Currently when I "Select Unused" it also takes many of the audio files used in the Tracks window and when I hit delete, they disappear.
This is a pretty big problem when trying to manage session file size. Thanks in advance for any help!

It seems likely that these have been incorrectly encoded by Netflix.
I suspect you are using US Netflix - not sure these shows are available on UK Netflix.

Similar Messages

HP 15-r029wm Notebook PC audio not working correctly

Hi, I recently bought a new HP 15-r029wm Notebook PC that runs Windows 8. Since day one the audio has not been working correctly, and has since been getting worse. It's hard to explain, but the audio constantly repeats bits of audio very rapidly. This occurs with or without headphones in, and the volume doesn't affect the glitching. The PC claims to have "HD audio" but this is anything but HD... Help would be GREATLY appreciated! Thank you.

Hello @Coronell96 ,
Welcome to the HP Forums!
I understand your HP 15-r029wm is having issues with audio quality.
I suggest setting the audio quality to a higher setting:
1. Right click the Speaker icon in the bottom right corner by your time.
2. Click Playback Devices.
3. Click Speakers.
4. Click properties.
5. Click the advanced tab on the Properties window.
6. Change the Default Format drop-down to the highest quality.
7. Repeat steps 3-6 for the Headphones if they are not listed with Speakers.
8. Apply the properties.
9. Click OK to close the properties window.
10. Click OK to close the Playback Devices.
11. Test.
Also, try updating the drivers for your sound card with this download: Realtek High-Definition (HD) Audio Driver.
I would also suggest going through these documents for some generic sound troubleshooting:
Tips for fixing common sound problems (Windows 7)
No sound in Windows (Windows 7 and Windows 8)
Let me know if this works!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

Brand new HP Beats Special Edition 15-p030nr Notebook PC , Audio not working correctly

Just bought this computer for me 9/30/14. Volume is at 100% and while there is some sound, you can barely hear it. I have checked drivers, device manager etc and nothing seems to change it. I need to know if this is a defect in the system or if there is something else I can do. I hate to think we paid all this money for the computer, one reason being the Beats audio, and have it not work. I will return it if I cannot get it working.

Hi @Twright2014
Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I see your having some sound issues with your new notebook. I will be happy to help you with this. How does the audio sound when you use a set of headphones? Try the troubleshooting steps in this HP document No Sound from Speakers which includes using the built-in Windows troubleshooter.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Hp dv6t select edition headphones not working after upgrading to windows 8.1

So I upgraded to windows 8.1 from 7 and now when I plug in my earphones there is no audio. I can still hear something when I just use the laptop speakers, just not with earphones. I also don't see the beats audio program on my laptop anymore or the hp support assisstant.

Hi @parjinder82 ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue of the Beats Audio not working correctly since you did the update for Windows 8.1 on your HP ENVY dv6t-7200 Notebook. Here is a document to check some settings that might be and issue with the software.
Sometimes the updates have not completely finish. I recommend restarting the Notebook as if there are some updates that have not gone through this will finish them.
You could check what is installed by checking here:
1. Right click speaker icon (right hand corner)
2. Select Playback devices
3. Right click Speakers
4. Enable it and set as Default
5. Click Apply/Ok
You might benefit from this document on Windows updates and sound issues.
Hope this helps.
Let me know, Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

HT6114 my audio midi setup is not working correctly since the install of maverick os

my audio midi setup is not working correctly since the install of maverick os

The upgrade may have reset to default settings ..
Check System Preferences > Sounds > Output
Make sure the correct device is selected and the Mute box is not checked.

Middle select button not working correctly?

I have a nano second generation and the select button in the middle is not working correctly. I have to keep pushing it and pushing it to get it to work and now it's not working at all. Any ideas?

Try Restoring it. If that doesn't work you need to have it serviced. You can either take it by an Apple Store and make a Genius Bar appointment or send it here:
http://depot.info.apple.com/ipod/

Ps CC 2014 is not working correctly after mac update to Yosemite 10.10.1. Select does not protect unselected areas. Magic eraser erases unselected ares.

Ps CC 2014 is not working correctly after mac update to Yosemite 10.10.1. Select does not protect unselected areas. Magic eraser erases unselected ares.

Yes my particular issue is not like yours. However, there have been many other laptop users experiencing similar problem to yours after 3.10 kernel. Mostly it seems to be bumblebee users that experience your problem with the blank screen. We do know that nvidia have yet to make their official drivers work with kernel 3.10 and up. The drivers in the Arch repository have been patched to work with 3.10. From what I have seen, this also only seem to be affecting laptops with newer nvidia gpu's. I fear there is not much to do with this problem until nvidia give official 3.10 kernel support.
My suggestion would be to stick with 3.9.9 kernel and the drivers that work with it, and don't upgrade those packages until nvidia has addressed these issues. If you have a look at the nvidia forums you will see quite a number of topics mentioning black screen when starting x on 3.10 kernel, and also a thread for the system dying. Reading some of the threads there may help you keep up to date on whether or not the issue seem to be solved.
https://devtalk.nvidia.com/default/board/98/

HP Pavilion p7-1421 Desktop PC BEATS AUDIO not working.

Hi, new here with thankfully my first problem with the desktop in the subject line.
Somewhere along the way, the Beats Audio stopped working correctly. The Equalizer
sliders will not move at all, and the "Test Speakers" button will highlight the left, then right
speaker, but no sound will be produced.
For background, I did install StartDoc, a program that gives one back the original Windows 7 "Start"
button and desktop. Other than that, I have not installed anything, except the reccommended HP upgrades.
Also, the machine is obviously running Windows 8, and I have NOT switched to 8.1.
I see on the Notebook page lots of questions re. Beats not working and solutions, but each user is asked
for the specific model, OS etc. This is why I chose to post a new thread, so that the experts can address
my exact machine.
Thanks in advance,
John
This question was solved.
View Solution.

Hi srv1954,
I suggest reinstalling Beats Audio.
Open the Charms menu, select "Search".
Enter "Recovery Manager" and then select Recovery Manager from the list. Click "Yes "at the User Account Control.
Select "Hardware Driver Reinstallation". Select "Next". Select 'IDT High Definition Audio CODEC".
Select "Next"
Follow prompts to reinstall and reboot your PC.
Jaco.
****I am not an HP employee****
Please give a" Kudos" if advice received is relevant or" Accept as Solution" if your problem has been solved.
+++++++++++++++++++++++++++++++++++++++++++++++++++++
H8 1380t CTO, Intel i7 3820
16 GB DDR3
Pegatron Motherboard- IPIWB-PB (Pittsburgh), Radeon HD 7570 1GB. Win 7 Home Premium upgraded to Windows 8.1 Pro.
Envy Phoenix 810-150se, Intel i7 4820k
16 GB DDR3
Pittsburgh2 Mainboard, NVIDIA GTX 645- 2GB GDDR5. Win 8.1 Pro.
HP 560z CTO AMD Phenom II X6 1090T
16 GB DDR3.
Radeon HD 6570
Win 7 Home Premium upgraded to Win 7 Pro.
HP ENVY 17t-j000 CTO Quad Edition Notebook. I7 4702mq
12 GB DDR3
Nvidia Graphics
Win 8 Pro
Errare humanum est.

Title & Menu Buttons not working correctly on remote control/ set top player but work in preview.

Title & Menu Buttons not working correctly on remote control/ set top player but work in encore preview. This only happens for a Blu ray project. When a user presses the menu button it should go to the previous menu they were on but it goes to the main menu. When they press the title button they should go to the main menu but it doesn't do anything. My DVD projects work as expected.I've tried creating a new "test" project with different footage and still get the same undesirable results.
Overrides grayed out and set to "not set" for timelines and menus.Project settings and build are set to blu ray. Also I've noticed when I preview a Bluray project the preview window shows a red colored disc next to the Title button when viewing the timelines and green when playing the menus but not so for a DVD project it displays red if motion menus and or timelines are not rendered/encoded. I'm not using motion menus and all the media is encoded according to the project specs.
I've searched this forum but couldn't find the answer. Any help or redirects to a solution would be appreciated. Working with CS5. Thanks.

I found out on my Samsung Blu ray player the remote has a tools button on it that brings up audio, angle, chapter selection etc.and also title selection which is actually the menus and the timelines unfortunately. It's not as easy or direct as last menu selected but it's a workaround at least. I also plan on using a pop up menu. I'll let you know.

Line-in input not working correctly in Garageband

Problem:
Line-in input not working correctly with Garageband. Problem occurred AFTER installing and using Blue Yeti USB mic, purchased from the Apple store.
System Details:
'07 20" iMac 2.4GHz 4GB RAM, OSX 10.6.5, Garageband '11 v6.0, Logitech Z4 speakers.
Background:
Before using the Yeti USB mic, I used the line-in jack. I'd connect a Shure mic or guitars directly in, but more recently through a 12 channel mixer. Have connected the Shure mic directly into the input jack, and the computer appears to be picking it up (System Preferences->Sound->Input), it is responding correctly there. Have set the output to the headphone (line-out) jack. When I go into Garageband, I can select from Line-in 1, Line-in 2, and Line-in Stereo. The trouble is that it's the iMac's built-in mic that is active (the one above the screen), not the line-in. I've rebooted the computer, checked the connections, reconnected the Yeti mic and I can't find what's causing the problem. Not sure what to do from here, need some help. Thanks

I have Logic Express on the iMac as well and I worked out how to set the input device back to the Line-In. I went back to Garageband and found the equivalent setting under Preferences->Audio/MIDI. Thanks for reading, sorry I didn't sort it out sooner! Merry Christmas!

Audio not working on channel 5 and 7,, okay on all others????

audio not working on channel 5 and 7,, okay on all others????

dalharris wrote:
audio not working on channel 5 and 7,, okay on all others????
Without knowing all of the specifics in your situation, you may want to try these options:
- If you have a DTA, and your remote control has a LANG button on it, press it.
- If you have an HD or SD full cable box:
Most low or no audio issues can be corrected by setting the Optimal Stereo output of the cable box. Here are the steps: Press the Menu button twice on your remote control. Select Setup. Select Audio Setup Under the Optimal Stereo setting, choose "Select to Optimize" and press OK/Select on the remote control
- The audio settings on your cable box may have accidentally been changed:
Press the Menu button twice on the Comcast Universal Remote Control. A new screen below will appear, with the top-left option automatically selected.
Use the down-arrow key (above the Info button) to navigate to Setup and press OK/Select (the center key on the remote control in the middle of the 4 arrow/directional buttons).
Use the down-arrow key (above the Info button) to navigate to Audio setup and press OK/Select.
The Default Audio Track will default to the first option–Channel default–which which is always the channel’s main audio track (unless it was previously changed).
Press the right-arrow navigation key to change the audio track. Changing this selection will instantly change the audio.
1. Press once for English
2. Press twice for Spanish (Español) OR to activate Video Description (DVS)
3. Press three times for French (Français) 4. Press four times for Portuguese (Portugues).
5. Then press the Exit button (above the Volume button) to resume program viewing
Please note: These audio options can only be heard if the program provider or cable channel is providing that additional audio option.
- If the above does not help, look at the remote control for your TV set (not your cable box) as the TVs language settings may have been accidentally changed (sometimes labeled as MTS or SAP on the remote or via your TVs settings menu).

Sorting not working correctly for date field in alv report

Hi All,
My report displays many rows also containing date type fields of bldat,budat .
When I sort the report selecting field of type bldat budat the sorting is not correct for the year.
Ex:
Invoice doc dat
01-25-2011
01-21-2011
02-02-2011
10-25-2010
11-20-2010
If I use ascending then it is sorted as :
Invoice doc dat
01-21-2011
01-25-2011
02-02-2011
10-20-2010
10-25-2010
Why the sorting is not working correct for year.(2010 records should have been first).
The field wa_tab-bldat is of type char10.
It is populated as wa_tab-bldat = bsak-bldat.
Kindly suggest what can be done.

The field wa_tab-bldat is of type char10
Then what it does is correct.
Refer to type datum...it will work

Key Figure calculation in Abap is not working correctly - Overlooping

Hi,
I wrote a logic to calculate the ratio of key figure but it is not working correctly
For example I have a requirement to split 1 Product into Several new Products and also the Net Amount will be splitted to these several new products as well. The total Amount of the new product will be equivalent to the Net Amount.
So far my Logic is splitting the product to several new products but the amount is incorrect as the calculation is over looping.
Sample
A PRODUCT has Net Amount 1000. And this product needs to be splitted into 3 new products. Each of this new product is assigned a ratio of 0.3, 0.2 and 0.7 respectively. total sum of the ratio is 1.
PRODUCT1 0.3 = 1000 * 0.3 = 300
PRODUCT2 0.2 = 1000 * 0.2 = 200
PRODUCT3 0.7 = 1000 * 0.7 = 700
The total amount of this new products is 1000.
Now my logic is working this way.
PRODUCT1 0.3 = 1000 * 0.3 = 300
PRODUCT2 0.2 = 1000 * 0.2 * 0.3 = 60
PRODUCT3 0.7 = 1000 * 0.2 * 0.3 * 0.7 = 42
Only the PRODUCT1 is working correctly and there is overlooping for the remaining products
Logic used
DATA: t_data TYPE data_package_structure OCCURS 0 WITH HEADER LINE.
DATA: t_newdso LIKE /bic/newdso OCCURS 0 WITH HEADER LINE.
DATA: t_olddso LIKE /bic/olddso OCCURS 0 WITH HEADER LINE.
DATA: amount LIKE data_package-netamount.
DATA: zidx LIKE sy-tabix.
REFRESH t_data.
LOOP AT data_package.
zidx = sy-tabix.
MOVE-CORRESPONDING data_package TO t_data.
REFRESH t_newdso.
SELECT * FROM newdso INTO TABLE t_newdso WHERE prod =
data_package-prod.
SORT t_newdso BY prod.
*LOOP AT T_NEWDSO.
READ TABLE t_newdso WITH KEY prodh4 = t_data-prod.
IF sy-subrc EQ 0.
    LOOP AT t_newdso.
      t_data-prod = t_newdso-/bic/znew_mp.
      t_data-material = t_newdso-material.
*T_DATA-NETAMOUNT = T_DATA NETAMOUNT * T_NEWDSO-/BIC/ZSP_RATIO.*
      APPEND t_data.
    ENDLOOP.
ELSE.
    REFRESH t_olddso.
    SELECT * FROM olddso INTO TABLE t_olddso WHERE prod =
    data_package-prod.
    SORT t_olddso BY prod.
    READ TABLE t_olddso WITH KEY prodh4 = t_data-prod.
    t_data-prod = t_olddso-prod.
    t_data-material = t_olddso-material.
    APPEND t_data.
ENDIF.
MODIFY data_package INDEX zidx.
ENDLOOP.
REFRESH data_package.
data_package[] = t_data[].
thanks
Edited by: Matt on Sep 27, 2010 2:25 PM - added tags

Hi,
I am not really good at debugging Abap code since I am a newbie. however I have tried to add CLEAR T_DATA before the first loop.
REFRESH T_DATA.
LOOP AT DATA_PACKAGE.
ZIDX = SY-TABIX.
MOVE-CORRESPONDING DATA_PACKAGE TO T_DATA.
and before the second loop and select statement and at the end of the loop.
REFRESH T_NEWDSO.
SELECT * FROM NEWDSO INTO table T_NEWDSO WHERE PROD =
DATA_PACKAGE-PROD.
SORT T_NEWDSO BY PROD.
READ TABLE T_NEWDSO WITH KEY PROD = T_DATA-PROD.
IF sy-subrc EQ 0.
LOOP AT T_NEWDSO.
but then not all data are being fetched.
thanks
Edited by: Bhat Vaidya on Sep 28, 2010 8:33 AM

Email pushing not working correctly for office email - 3 seperate devices/carriers

We switched email hosts several months ago and since our email pushing has not worked correctly. Our host/IT guy has been very unwilling to help me through this (I get the pleasure of being the in-house IT source)
I personally am on AT&T have no problems with the other 3 emails I have set up on my blackberry. However I receive my work account one time a day at roughly 6:15. Another user is on Alltel and he receives spotty emails throughout the day, but his gmail account comes through instantly. The third user is on nextel and he receives his 2-3 times per day.
I began to think this was an email host issue since the three of us are all on different carriers, until I found out a fourth user, also on nextel, receives his emails fine.
Users 1-3 are on Outlook 07 on various versions of the Curve. We have all our messages to stay on the server.
User 4 is on the older nextel blackberry push to talk, and is not on outlook.
We do not have an exchange server. Our emails were all set up through our devices.
Any suggestions? The answers I have received through our carriers is to make sure that our messages are set to be left on the server. Everyone else at the office has given up - but for me this is the quest for the Holy Grail.......I'm determined find the answer!
Thank you in advance for any suggestions.
Caitlin Talbot

Potential solution for windows for a side-by-side install. This works for me.
To setup a firefox install side by side so that links from external programs (like email) can open (so you don't get a "Firefox is already running but is not responding" message) do the following.
The solution entails the use of the -no-remote switch. Don't use it for the default browser. Use it for the non default browser.
I'll use firefox 3.6 and firefox 4.0 as examples but this should work for future versions.
+ Install firefox 3.6 and Firefox 4.0 in different directories. Eg.
C:\Program Files\Mozilla Firefox\firefox.exe
C:\Program Files\Mozilla Firefox 4\firefox.exe
+ Open profile manager. Start > Run : firefox.exe -ProfileManager
+ In profile manager create Two Profiles.
firefox3.6
firefox4
+ In profile manager select firefox 4 as your default (assuming you want to default to the latest) and tick "Don't ask at startup"
+ Create two windows shortcuts.
* General: Mozilla Firefox 4 (default). Shortcut > Target: "C:\Program Files\Mozilla Firefox 4\firefox.exe". Shortcut > Start In: "C:\Program Files\Mozilla Firefox 4"
* General: Mozilla Firefox 3.6. Shortcut > Target: "C:\Program Files\Mozilla Firefox\firefox.exe" -p firefox3.6 -no-remote. Shortcut > Start In: "C:\Program Files\Mozilla Firefox"
That's it. Links from external programs should now open in your default browser.
Further details see. [http://kb.mozillazine.org/Opening_a_new_instance_of_your_Mozilla_application_with_another_profile Opening a new instance of your Mozilla application with another profile]

LaserJet Pr0 200 color MFP M276nw Touch Screen not Working correctly

Hello, I'm having an issue with a LaserJet Pr0 200 color MFP M276nw Touch Screen not Working correctly. I have followed the instructions to reset the printer, but now am unable to select 'English' as my language because every time I select the 'English' option 'Spanish' is selected. I am then given two options to select 'Si' or 'No' both of which can not be selected on the touch screen?
Anybody know of a way round this?

Hi @dnhowes ,
I see that you are having issues with the touch screen not working correctly. I will do my best to help you.
Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
Was it the Nvram reset back to factory settings that you tried or a hard reset?
Try selecting the option on the display a little higher above the icon to see if that helps. Some touch screens are finicky.
I find that on the Lab printers when I am selecting different menus.
If the issue continues, please call our technical support at 800-474-6836 for further assistance. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Select UNUSED Audio - Not Working Correctly

Similar Messages

Maybe you are looking for