Send a notification to the proxy when he is removed as proxy

We have a requirement to send a notification to the proxy when he is removed as proxy.
There is one out of box notification to the proxy when assigned. But could not figure out an option to send a notification when proxy is removed.
Is there a way?
Thnx
Sid
Edited by: Sidharath on Jun 4, 2012 2:23 PM

yes, there is a OOTB system property called XL.ProxyNotificationTemplate to tell user that he is a proxy. But as far as I know there is no notification to 'proxy removed' .
1-You can create a system property and add SQL's into it. Please check this link I replied before: Re: Exception while setting security question
2-You can create a trigger into database (proxy table=PXD) that start some procedures(including e-mail notification) if proxy user is removed.
I hope this helps.
Thiago Leoncio.

Similar Messages

Error Sending a notification from the Workflow

Hi All,
We are having the following error when we are trying to send a notification to the user.
The is just a FYI notification so the workflow process is showing Completed with Errors.
Then Error Message has the following text.
[WF_ERROR] ERROR_MESSAGE=3835: Error '-20002 - ORA-20002: 2018: Unable to generate the notification XML. Caused by: 2020: Error when getting notification content. Caused by: ORA-01001: invalid cursor Wf_Engine.GetItemAttrNumber(PPGARWF, 569386-169741-1007928-4543134-301073, ORG_ID) Wf_Notification.GetAttrClob(601087, RECEIPT_DETAILS, text/html) Wf_Notification.oldGetAttrClob(601087, RECEIPT_DETAILS, text/html) WF_NOTIFICATION.GetFullBody(nid => 601087, disptype => text/html) WF_MAIL.GetLOBMessage3(nid => 601087, r_ntf_pref => MAILHTM2)' encountered during execution of Generate function 'WF_XML.Generate' for event 'oracle.apps.wf.notification.send'. ERROR_STACK= WF_MAIL.GetLOBMessage3(601087, WFMAIL, 2020: Error when getting notification content. Caused by: ORA-01001: invalid cursor Wf_Engine.GetItemAttrNumber(PPGARWF, 569386-169741-1007928-4543134-301073, ORG_ID) Wf_Notification.GetAttrClob(601087, RECEIPT_DETAILS, text/html) Wf_Notification.oldGetAttrClob(601087, RECEIPT_DETAILS, text/html) WF_NOTIFICATION.GetFullBody(nid => 601087, disptype => text/html) WF_MAIL.GetLOBMessage3(nid => 601087, r_ntf_pref => MAILHTM2), Step -> Getting text/html body) WF_XML.GenerateDoc(oracle.apps.wf.notification.send, 601087) WF_XML.Generate(oracle.apps.wf.notification.send, 601087) WF_XML.Generate(oracle.apps.wf.notification.send, 601087) Wf_Event.setMessage(oracle.apps.wf.notification.send, 601087, WF_XML.Generate) Wf_Event.dispatch_internal() [Error Process Error: 3116: Activity 'WFERROR/DEFAULT_ERROR' is not a runnable process.]
Please can some one help me finding the root cause for the issue.
Thanks,
Varun

Hi
Thanks for your concern and help.
Actually in my case it is a Sales Order OEOL workflow which is customised. Almost 90-100 SO get stuck with the following below error. When we try to run the "Retry Workflow Error Activitivity" program it clears them all except few. Please can you advice.
Failed Activity Fulfill - Deferred
Activity Type Function
Error Name -1001 [Error Process Error: -1
Error Message ORA-01001: invalid cursor [Error Process Error: ORA-01001: invalid cursor ORA-01001: invalid cursor]
Error Stack Wf_Engine.GetItemAttrText(OEOL, 3432469, ERROR_ITEM_TYPE) WF_ITEM.SetEndDate(OEOL, 3432469) Wf_Item_Activity_Status.Create_Status(OEOL, 3432469, 39202, COMPLETE) Wf_Engine_Util.Complete_Activity(OEOL, 3432469, 39202) Wf_Engine_Util.Complete_Activity(OEOL, 3432469, 132829, #NULL) Wf_Engine_Util.Execute_Activity(OEOL, 3432469, 132829, RUN) Wf_Engine_Util.Process_Activity(OEOL, 3432469, 132829, 50) Wf_Engine_Util.Complete_Activity(OEOL, 3432469, 132846) Wf_Engine_Util.Complete_Activity(OEOL, 3432469, 132555, #NULL) Wf_Engine_Util.Execute_Activity(OEOL, 3432469, 132555, RUN) Wf_Engine_Util.Process_Activity(OEOL, 3432469, 132555, 50) Wf_Engine_Util.Complete_Activity(OEOL, 3432469, 132551) Wf_Engine_Util.Complete_Activity(OEOL, 3432469, 131928, #NULL) Wf_Engine_Util.Execute_Activity(OEOL, 3432469, 131928, RUN) Wf_Engine_Util.Process_Activity(OEOL, 3432469, 131928, 50) Wf_Engine_Util.Complete_Activity(OEOL, 3432469, 131930, COMPLETE) Wf_Engine_Util.Execute_Activity(OEOL, 3432469, 131930, RUN) Wf_Engine_Util.Process_Activity(OEOL, 3432469, 131930, 50) Wf_Engine_Util.Complete_Activity(OEOL, 3432469, 131932, #NULL) Wf_Engine_Util.Execute_Activity(OEOL, 3432469, 131932, RUN) Wf_Engine_Util.Process_Activity(OEOL, 3432469, 131932, 50) Wf_Engine_Util.Process_Activity(OEOL, 3432469, 132551, 50) Wf_Engine_Util.Complete_Activity(OEOL, 3432469, 132559, COMPLETE) Wf_Engine_Util.Complete_Activity(OEOL, 3432469, 132458, #NULL) Wf_Engine_Util.Execute_Activity(OEOL, 3432469, 132458, RUN) Wf_Engine_Util.Process_Activity(OEOL, 3432469, 132458, 50) Wf_Engine_Util.Complete_Activity(OEOL, 3432469, 132460, COMPLETE) Wf_Engine_Util.Execute_Activity(OEOL, 3432469, 132460, RUN) Wf_Engine_Util.Process_Activity(OEOL, 3432469, 132460, 50) Wf_Engine_Util.Complete_Activity(OEOL, 3432469, 132466, #NULL) Wf_Engine_Util.Execute_Activity(OEOL, 3432469, 132466, RUN) Wf_Engine_Util.Process_Activity(OEOL, 3432469, 132466, 50) Wf_Engine_Util.Process_Activity(OEOL, 3432469, 132559, 50) Wf_Engine_Util.Complete_Activity(OEOL, 3432469, 132560) Wf_Engine_Util.Execute_Activity(OEOL, 3432469, 132560, RUN) Wf_Engine_Util.Process_Activity(OEOL, 3432469, 132560, 50) Wf_Engine_Util.Complete_Activity(OEOL, 3432469, 132557, #NULL) Wf_Engine_Util.Execute_Activity(OEOL, 3432469, 132557, RUN) Wf_Engine_Util.Process_Activity(OEOL, 3432469, 132557, 50) Wf_Engine_Util.Complete_Activity(OEOL, 3432469, 132553, #NULL) Wf_Engine_Util.Execute_Activity(OEOL, 3432469, 132553, RUN) Wf_Engine_Util.Process_Activity(OEOL, 3432469, 132553) Wf_Queue.ProcessDeferredEvent(OEOL) [Error Process Error: Wf_Engine.GetItemAttrText(OEOL, 3432469, .ADMIN_KEY)]
*********************************************************************

How to send a Notification in the Background????

Hi Experts,
I am working on a process consisting of 2 activities :-
    - Creation of a Proposal by the Employee
    - Evaluation & Approval of Proposal by the Manager
I have these 2 doubts :-
    - I need to send a notification to the manager on creation of a proposal. How do i go about it???
    - Also i need to send a notification to the user regarding the approval or rejection of the proposal.
Should i create a Callable Object in GP and add that in the Action Create Proposal???
please guide me regarding the same.
Thanks a lot.
Cheers
Gaurav Raghav

Hi again
Usually it takes a while till the Adobe designer loads, but if the window remains blank... hmmm than I guess it should be some error in Adobe Document Services configuration...
So I guess you know this, but just in case here are installations you need to use for Adobe Document Services and composite forms in Web Dynpro Applications:
·        A local installation of Adobe LiveCycle Designer 7.1.
You can download Adobe LiveCycle Designer 7.1 from SAP Service Marketplace at: service.sap.com/installations - Search for Installations and Upgrades (from the left-hand side navigation) and then for material number 50083078_1. To install the Adobe LiveCycle Designer, use the file SapAldSetup.exe from the downloaded archive 50083078_1.ZIP.
·        A local installation of Adobe Reader 7.0 or higher or a full version of Adobe Acrobat 7.0.
You can download Adobe Reader for free from the Adobe web site.
Depending on your requirements, you may also need to configure specific composite form properties.
Apart from that, if you have a ready composite form created previously, you can upload it by checking the Field-Based Template checkbox in the beginning of the wizard for creating composite form.Thus, the wizard does not make you create a new one from scratch, but rather upload your own.
Hope that was helpful
Greets,
Petra

Send a mail to the customer when their order of type Residential Credit is booked

Hi,
We need to send a mail to the customer when their order of type Residential Credit is booked.
I followed the below steps, but i could not write the code for sending email, can you please send me a sample code.
Step1:
=======
Setup Processing Constraint on Order Header/Line for order booking
*(Navigation : Setup --> Rules --> Security --> Processing Constraints)*
a) Set Application : Order Management, Entity : Order Header
b) Under constraints --> set Operation : Create, user Action : Raise Integration event, and make it enabled
c) Condition --> Set Scope : Any, Validation Entity : Order header, record Set : Order, Validation Template : Booked and make it enabled too.
Step2:
========
Profile Option: Set "OM: Electronic Message Integration Event Sources" to be set to All
Step3:
========
Develop a code(Package) /workflow as per business requirement. e.g sending mail to customer when order is booked.
Step 4:
=======
Open business event *"oracle.apps.ont.oi.xml_int.status"* through workflow Administrator responsibility. Include code/workflow in the subscription section of Business event.
Navigation : WF Administrator Web application ---> Administrator Workflow --> Business Events
Search Name : oracle.apps.ont.oi.xml_int.status, it will return 1 record, click on subcription...
In this page include the function e.g CLN_CH_EVENT_SUBSCRIPTION_PKG.ADD_COLLABORATION_EVENT_SUB, if you are using WF, mention (e.g) wf_rule.default_rule in function & Workflow as OEEM/WRITE_HISTORY and enable it in this page..
Thanks and Regards,
Priya

Just wanted to let you guys know that I still haven't received my MP3 player... Creative has had the MP3 player for 73 days now and they still haven't sent it back. Since last time I wrote here I got an e-mail from Creative saying they got the MP3 player on the 5th of the November and that somehow the status wasn't updated. Well, it's been 73 days now, care to send it away? I sent them and e-mail yesterday where I wrote that they could just send me the cash for it or a new MP3 player.
If I don't receive my MP3 player in a near future I will contact "Allm?nna Reklamations N?mnden" (a Swedish "Consumerist"-like government sponsored organization that deals with people vs company legal cases).
Again, I strongly advise everyone to not buy any more Creative products. Once they break you won't get the help you need.

Sending cache notifications to the backend ABAP

Hi,
1. How the cache notifications are sent to the backend ABAP?
2. What is the role of INTEGRATION_DIRECTORY_HMI ( /dir/CacheRefresh )?
3. If I need to require cache notifications to be sent from PI (ABAP 7.1) to ECC (ABAP 7.0), do i need to have INTEGRATION_DIRECTORY_HMI in ECC?
Thanks and regards,
Sreehari

Hi Abhishek,
Just want to be clear about one thing. If INTEGRATION_DIRECTORY_HMI stores the cache updates, and I need to send these updates to ECC ( which is on a seperate AS ), ideally I should be having the RFC destination in ECC as well.
My understanding was if the RFC destination exist in PI, it will send cache notifications to the ABAP of PI. If we need to send cache notifications to some other ABAP system in the landscape, we need to have the RFC destination there as well. Please correct me if I am wrong.
Many Thanks and regards,
Sreehari

Does anyone know how enable notifications on the ipad when it is disabled?

Does anyone know how to enable notifications on the ipad when it is disabled from typing in the passcode to many times?

i have this question

Whenever I try to erace something with the delete button it acts like "tab" and sends me all over the page when all I want to do is erace what I wrote... help!

Whenever I try to erace something with the delete button it acts like "tab" and sends me all over the page when all I want to do is erace what I wrote...How do I fix this?

Whenever I try to erace something with the delete button it acts like "tab" and sends me all over the page when all I want to do is erace what I wrote...How do I fix this?

Auto provisioning users and send email notification to the users

I currently have CUCM 10.5 setup to auto register phones and I use Cisco prime provisioning 10.5 to auto provision the users.
Self provisioning is setup and users can call the IVR number enter the self service ID, which is their DN.
what I would like to do is send an email notifying the end user of their setup and how to use their telephony device Example (Self-service ID: 8888, auth code: 3333) is this possible from Prime Provisioning or CUCM.

Thanks Jamie
Wishful thinking I guess. It would have been seamless if they added that form of email notification to end users when auto provisioning. Anyways to get around that I used MS word mail merge and used the same spread sheet I used to batch provision the users to send the Self-service ID to the email contacts.

How to send email notification with the help of OID

I have a query,is there a way to send email notification (something like password change) to users from OID(Oracle Internet Directory)?
Regards,
Arun K M

Macs newer than 10.7's release just need to boot with the 'D' key.
Otherwise you need to find the original installer disk of the Mac, or call AppleCare for it to be able to run the hardware diagnostic.

No notification on the dashboard when purchase being made

Hi,
Recently I have linked up my shopping cart to an paypal account. After completing an transaction, I could be brought back to the website however I realised a few things.
http://screencast.com/t/zfNRthKIk0
First of all, this is what I get http://screencast.com/t/NkRmDQABQt6
Second there is no notification on the dashboard.
Can I know if there's any recent issue or problem affecting this?
Thanks

Check if 'Auto-Return' is on and pointing to the correct URL on PayPal's end. You can view this information here: http://kb.worldsecuresystems.com/833/cpsid_83331.html. I suggest also going over that article and ensure everything's set up correctly as it appears this is an issue specific to your site - PayPal's working fine on my site. If that doesn't help, may be best to contact support.

Workflow to send email notification to the assigned person using Sharepoint Designer 2013

Hi,
The requirement is whenever the assigned to Field is changed to someone, the assigned to person should get an email notification saying that the item has been assigned to you.
I created a sharepoint designer List Workflow to send an email notification, below are the steps,
1. Log workflow to the workflow history
2. then Wait for Assigned to be not empty
3. then Email currentItem:AssignedTo
4.then stop the workflow
But the thing is whenever any field is changed in the particular item this email triggers, I want to send email only when Assigned to Field is changed and not any other field. how do i write the condition to check only if the assigned to field is changed
or not and and how i trigger the email.
Any help is much appreciated.
Thank you
Smile Always

Hi,
According to your post, my understanding is that you want to send email via workflow while the assigned to field value changed.
We can create a helper field
which will store the previous value of the Assigned To, then you can compare the current value with previous value of assigned to and send an email accordingly.
I have made a simple workflow demo below, you can refer to it.
I have created a new single line of text type field AssignedPerson in the list, then use the workflow below to achieve your scenario.
More reference:
http://officepowerups.com/2013/07/09/send-email-when-specific-field-changes-in-sharepoint/
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

How to send a mail to the user when a job gets canceled?

Hi experts,
                  I need to send a mail when a job gets canceled to the user.I know the FM for sending mail and i can find if a job is canceled from tbtco,but i want to know how to send the mail from the same program ,once it got canceled ?
thanks in advance,
helpful answers will be awarded with points
regards,
ashwin

Hi Ashwin
Use the below peace of code:
REPORT ZBCJOBMONITOR .
TABLES: SOMLREC90,
        TBTCO.
DATA: MAILDATA   LIKE SODOCCHGI1.
DATA: MAILTXT    LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
DATA: MAILREC    LIKE SOMLREC90 OCCURS 0 WITH HEADER LINE.
DATA: I_TBTCO    LIKE TBTCO OCCURS 0 WITH HEADER LINE.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001 .
SELECT-OPTIONS: S_JOB FOR TBTCO-JOBNAME.
SELECT-OPTIONS: S_JOBC FOR TBTCO-JOBClass.
SELECT-OPTIONS: S_REC FOR SOMLREC90-RECEIVER.
SELECTION-SCREEN END OF BLOCK B1.
START-OF-SELECTION.
CLEAR:    MAILDATA, MAILTXT, MAILREC, I_TBTCO.
REFRESH: MAILTXT, MAILREC, I_TBTCO.
PERFORM GET_ABENDED_JOBS.
PERFORM BUILD_RECEIVERS.
LOOP AT I_TBTCO.
    PERFORM BUILD_TEXT_MESSAGE.
    PERFORM SEND_MAIL_NODIALOG..
ENDLOOP.
     Form BUILD_TEXT_MESSAGE
FORM GET_ABENDED_JOBS.
SELECT * FROM TBTCO
          INTO CORRESPONDING FIELDS OF TABLE I_TBTCO
                     WHERE JOBNAME IN S_JOB
                       AND STATUS = 'A'
                       AND JOBCLASS IN S_JOBC
                       AND SDLSTRTDT = SY-DATUM.
ENDFORM.
     Form BUILD_TEXT_MESSAGE
FORM BUILD_TEXT_MESSAGE.
DATA: DATE(10) TYPE C.
DATA: TIME(10) TYPE C.
MAILDATA-OBJ_NAME = 'MONITOR'.
MAILDATA-OBJ_DESCR = 'Batch Job Monitor'.
MAILDATA-OBJ_LANGU = SY-LANGU.
CONCATENATE 'Job Name:' I_TBTCO-JOBNAME
              INTO MAILTXT-LINE SEPARATED BY SPACE.
APPEND MAILTXT.
PERFORM FORMAT_DATE USING I_TBTCO-SDLSTRTDT
                            DATE.
CONCATENATE I_TBTCO-SDLSTRTTM+0(2) ':'
              I_TBTCO-SDLSTRTTM+2(2) ':'
              I_TBTCO-SDLSTRTTM+4(2)
                 INTO TIME.
CONCATENATE 'Start Date/Time:' DATE TIME
            INTO MAILTXT-LINE SEPARATED BY SPACE.
APPEND MAILTXT.
CONCATENATE 'Job Class:' I_TBTCO-JOBCLASS
            INTO MAILTXT-LINE SEPARATED BY SPACE.
APPEND MAILTXT.
MAILTXT-LINE = 'Job has terminated abnormally'.
APPEND MAILTXT.
ENDFORM.
     Form BUILD_RECEIVERS
FORM BUILD_RECEIVERS.
LOOP AT S_REC.
    CLEAR MAILREC.
    MAILREC-RECEIVER = S_REC-LOW.
    MAILREC-REC_TYPE = 'U'.
    APPEND MAILREC.
ENDLOOP.
ENDFORM.
     Form SEND_MAIL_NODIALOG
FORM SEND_MAIL_NODIALOG.
CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
       EXPORTING
            DOCUMENT_DATA              = MAILDATA
            DOCUMENT_TYPE              = 'RAW'
            PUT_IN_OUTBOX              = 'X'
       TABLES
            OBJECT_HEADER              = MAILTXT
            OBJECT_CONTENT             = MAILTXT
            RECEIVERS                  = MAILREC
       EXCEPTIONS
            TOO_MANY_RECEIVERS         = 1
            DOCUMENT_NOT_SENT          = 2
            DOCUMENT_TYPE_NOT_EXIST    = 3
            OPERATION_NO_AUTHORIZATION = 4
            PARAMETER_ERROR            = 5
            X_ERROR                    = 6
            ENQUEUE_ERROR              = 7
            OTHERS                     = 8.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.
     Form FORMAT_DATE
FORM FORMAT_DATE USING IN
                       OUT.
CALL FUNCTION 'CONVERT_DATE_TO_EXTERNAL'
       EXPORTING
            DATE_INTERNAL            = IN
       IMPORTING
            DATE_EXTERNAL            = OUT
       EXCEPTIONS
            DATE_INTERNAL_IS_INVALID = 1
            OTHERS                   = 2.
ENDFORM.
Regards,
Sree

How to send a notification to upstream system when trasformation fails?

How to send notification message if ‘transformation of input xml fails’ or ‘due to some technical exception while generating the orchestration plan’.

Hi
In order 'definition' you have tab Notification where you can create event notification(automation) which then send notification message too defined target.
regards
Tomac

Sending Mail Notification From the database server

Hi All,
I want to send the mail notification to any email id from the database server.
I used the in built Package UTL_SMTP(pp_to,pp_from,pp_subject,pp_hostname) but i didn't got the success. Actually i dont know how and what parameters has to pass to this package .
It will great help if some body helps with the an example.
Thanks in Advance

917574 wrote:
I want to send the mail notification to any email id from the database server.Oracle version?
The easiest is to use UTL_MAIL - available from 10g onwards. If you're on 11g, you also need an ACL (Access Control List) entry to allow PL/SQL code to step outside the database and connect to an external server.
UTL_MAIL uses UTL_SMTP. You can use UTL_SMTP directly, but then you need to understand the SMTP protocol and how to correctly construct Multipurpose Internet Mail Extensions (MIME) e-mail bodies. Not difficult - but something that many developers seem insistent to remain ignorant about.

My Iphone wont send push notifications for the app Telegram, what do I do to fix it?

When my Iphone is locked the push notifications will work for every app but one. My telegram app wont push notifications when someone messages me, what setting can I change to fix it?

Hey gingertodd0911,
Welcome to Apple Support Communities.
This article has information that may help you resolve the issue with no push notifications for that app on your iPhone 5s.
About Notifications on iPhone, iPad, and iPod touch - Apple Support
Not getting notifications for a specific app
Push notifications require an active Wi-Fi or cellular connection. If you’re not getting notifications for a specific app, try these steps:
Go to Settings > Notifications to verify that the app supports notifications. If notifications do not appear in the Notification Center, make sure that the Notification Center setting for the app is enabled.
Make sure you’re signed in to your Apple ID.
If you’ve recently installed an app or restored a backup, open the app to start getting notifications.
So long,
-Jason

Send a notification to the proxy when he is removed as proxy

Similar Messages

Maybe you are looking for