Send AP payment advice e-mail to multiple e-mail addresses?

Hello all,
I implemented Business Transaction Event 2040 to determine whether a vendor payment advice should be paper or e-mail. The SAP code that populates the e-mail address from the vendor's master record only uses the first e-mail address, regardless of how many e-mail addresses are entered.
Have any of you found a way to send the e-mail to all of the addresses in the vendor master address table, ADR6, without making a modification to SAP's code? I tried putting multiple e-mail addresses in the first address field. The data validation that is being performed did not allow multiple addresses.
When I asked this question of SAP, their answer was that there's nothing wrong and that they would be happy to charge for remote consulting to provide that functionality.
I know that we could create a group e-mail address within our e-mail application for every vendor that wants the e-mail to be sent to multiple recipients. Then enter that group e-mail address in the first line of the vendor master e-mail data. I don't really want to do this because this would entail AP staff requesting to have that group set up and maintained by the staff that maintains the e-mail application.
Since we have the ability to enter multiple e-mail addresses for vendors, it seems like the payment advice e-mail that is generated should send an e-mail for every entry in the vendor master.
Thanks
Bruce

Anil,
We are using program RFFOUS_T to create the payment advice. Your solution of copying that program and modifying it would work. But I don't want to go to the time and trouble of doing that.
Because the volume of vendors that have multiple e-mail addresses is small, we'll just create group e-mail addresses in our e-mail application (Lotus Notes) and use that group e-mail address in the vendor master e-mail screen.
SAP doesn't consider this an error. At best it is a serious shortcoming. I have a hard time believing that I'm the first or only customer that has asked about and for this.
Thanks
Bruce

Similar Messages

Sender in payment advice notes Via Email

Hi, All,
Is there any body know how to set up an specific sender in payment advice notes Via Email? Sounds like the e-mail-address of the sender always corresponds to the current user. Is there any way to set it as a pre defined email address? Thanks.
Meiying

Hi,
If you want to have the same E-mail address given on the form, then I can advise.
The one e-mail address can be put in the address detail field or the heather as a fix text,
so the same will be displayed to them every time.
We had the same problem and this was the easiest way to get it done.
Maybe this helps to you.
Good luck!
Regards,
Endre

Payment advice note to vendors thru e mail

Guys,
After executing F110, system generates the payment advices.I updated the master reocrd of vendor with a test email id , system is sending payment advices to this mail id,as its our internal server mail id.But when I update vendor record with some other external mail address, the system displays the msg.below.and cannot send thru mail.Please suggest.
XS826 Cannot process message, no route from to
F0387 Advice note for pymt 5000 2000000405 will be printed; dispatch via e-mail not poss.
Regards
Shaun

Hi shaun,
Payment advice is transfer to the external sytem. It means we need conectivity between 2 systems. I need to configure EDI settings. You need to contact the ABAPer and Basis consultant for your configuration.
Regards
Odaiah Pelley

Sending mail to multiple dynamic mail ids

Hi Everyone,
I have one query regarding sending mail to multiple table entry mail IDs. This table data I am getting from custom BO method vie multiline container element.
Now my problem is I am getting Multiple mail IDs to workflow container from BO but dont know how to send mails to those IDs and binding required for Send Mail step.
Thanks.

Hello,
Please search before posting questions.
Please google 'sap workflow send mail to multiple recipients' and you will find many responses.
Let us know if there are any problems.
regards
Rick Bakker

Setting Up Apple Mail With Multiple G-Mail Addresses

I have tried unsuccessfully to do this and need some help or for someone to say it will not work.
I have recently gone all Apple (MacBook Air, iPad and iPhone) and have an iCloud account set up. I love the sharing and synching but I am having a horrible time setting up the Apple Mail to work with my google account.
I am using OSX 10.8.2
PROBLEM
To have the Apple client retrieve all gmail from several gmail addresses and synch them across all devices and allow me to respond with the appropriate email address.
I have several email addresses that are handled by Google now. Example
[email protected]
[email protected] (I own the domain)
[email protected]
[email protected]
When I receive an email, and want to reply to it, I want to reply with the appropriate email address. I have tried and it alsways seems to default to the main google mail addess. Similarly, I would like to be able to start a new email and select which address I send from. An d finally, as a bonus--is there a way to create signatures for each of them?
Thanks

Thank you!
So, instead of having several email accounts under a single gmail sign-in, I need to have X separate ones? It might make sense then at this point to blow my domains out of google and just create them individually in Mail. Right?

Mail requires multiple "get mail" clicks to download email

One click of "get mail" and the script appears to fire, but no emails are downloaded
A second click and the emails start to arrive.
But it sometimes takes another click to make sure all the available emails are downloaded from the server.
solutions, anyone?
thank you!

I have 4 accounts running, 2 POP and 2 IMAP, after doing some checking today with a mac engineer online, it appears that it is incoming mail only affected and only on the POP accounts. I had previously tried recreating the accounts but as from today even just quitting Mail and reopening no longer works... the engineer has had to exculate my call to a specialist who in turn has now had to send it off to a specialist team to work on. When I get results, I will post them in case it helps someone else.

Send E-mail with payment advice to several address

Hi Experts
In our company in USA we set a payment through ACH, for it we need to send a payment advice to the vendor after we run process in F110, that process is run properly but the problem is we need to send some mails to more than one receiver, and the option to input it is in vendor master data, but at the moment to send e-mail the system only send mail to first address, some one have idea can I do for send to several address???
Thanks

HI,
I am assuming that you are using BTE 2040 or 2050 to achieve this. Instead of using the sample FM provided by SAP for this BTE, copy it to a Y/Z FM and then you can modify it accordingly.
My suggestion would be to create a custom table for the email addresses and pick the additional email addresses from there in conjugation with the Vendor master.
Regards

Sending Payment Advices Via E-mail or Fax

SAP Gururs,
We recently implemented ACH payment method, we are sending ACH payment advices via e-mail or fax. However the need to maintain various e-mails or a combination of e-mail and fax is necessary.
Example #1
I have 2 e-mail address one for our purchase department and the other for the vendor I only want the vendor to receive payment advices, the other e-mail is use to send other information to vendor. How do I control this type of scenario.
Example #2,
I have a fax number and E-mail, but vendor wants payment advice to be send via fax and not e-mail. I did this testing by selecting the "Do Use Communication for e-mail" but I still got an e-mail and not a fax.
Example # 3,
I have various fax numbers 1 use for payment advices, the other to send other information to other users to the vendor such as matrixes, price disputes etc. how can I control this.
Does any one has any additional information on these topics I will truly appreciate.

Hello,
Go to transaction code FIBF
Settings ==> Process Modules ==> ... of an SAP Application
Process: 00002040
Ctr: Blank
Appl.: FI-FI
Function Module: SAMPLE_PROCESS_00002040
You can copy the function module to "Z" function module and modify it accordingly. Then you can use your customized FM here.
This triggers an email of payment advice, provided if you have maintained Email Address in the Vendor Master "Address" Tab and the Standard Communication Method is "INT - Email"
You can see the email that is being triggered / delivered in transaction code SOST.
To deliver the emails settings in SCOT are being completed by Basis consultants and the gateways must have been opened. Except production environment, normally the gateways are closed in development or QA environment in order to avoid sending wrong payment advices outside.
Thanks,
Ravi

Send Payment Advice via Fax & E-mail

Hi,
We would like to send Payment Advices to vendors via Fax & E-mail.
We have put the e-mail and the fax number in the company code specific data of the vendor (i.e. accounting clerk's data) and we have configured the Payment Advice form.
When we make a payment run and select many vendors, we want to be able to:
- send the payment advice for vendor 1, 2 & 3 by fax
- send the payment advice for vendor 4, 5 & 6 by e-mail
The issue is that only 1 PDF is created with the payment advices of all these vendors.
When we want to send it via Fax or e-mail, it will be rejected, because there are different fax numbers/e-mail addresses in 1 PDF document.
Is it possible in a payment run to generate 1 Payment Advice per vendor?
Thank you for your feedback.
Kind regards,
Linda

Hello,
I would like to check
OBY6 - Make sure you have not ticked "No foreign currency exchange rate differences"
OB09 - Make sure sufficient accounts are maintained for account determination with loss and gain accounts.
OBA1 - Check your account determination for different keys
OBYY - Check your account determination in OBYY (probably this must have covered in OBA1)
check also in the configuration in case if have maintained any maximum % rate for foreign exchange differences per company code / per currency.
I would also recommend you to go through
Note 582987 - FB05: Translation postings with missing Customizing
Note 1041579 - Error F5 063 when transferring invoice to accounting
Regards,
Ravi

Payment Advice Print sent to Vendor Through E-Mail

Hi All,
Thanks in advance.
Is there any possibility to send my Payment Advice Print to my vendor through E-Mail in the standard transaction FBZ5.
Regards:
Sridhar.J

Hi,
Are you sending the Payment Advice print in the form of smartform?
If yes, check those FM SO_NEW_DOCUMENT_ATT_SEND_API1.
This is to attach the document to the mail.
SO_NEW_DOCUMENT_SEND_API1.
This is to send the mail from program.
Hope it helps.
Regards,
Raj

Payment advice through E mail or Fax

Dear Gurus,
My client wants to send the payment advice generated by the automatic payment program (F110) to his vendors through Email and/or Fax
ie at the end of the APP run, the payment advice should be sent through Fax or mail by the system.
Pl let me know the config steps to make this possible
Regards,
Rishikesh

Hello,
Go to transaction code FIBF
Settings ==> Process Modules ==> ... of an SAP Application
Process: 00002040
Ctr: Blank
Appl.: FI-FI
Function Module: SAMPLE_PROCESS_00002040
You can copy the function module to "Z" function module and modify it accordingly. Then you can use your customized FM here.
This triggers an email of payment advice, provided if you have maintained Email Address in the Vendor Master "Address" Tab and the Standard Communication Method is "INT - Email"
You can see the email that is being triggered / delivered in transaction code SOST.
To deliver the emails settings in SCOT are being completed by Basis consultants and the gateways must have been opened. Except production environment, normally the gateways are closed in development or QA environment in order to avoid sending wrong payment advices outside.
Thanks,
Ravi

Payment advice sent by e-mail, payment media file to be created before

dear all
We have implemented e-mail as a way of sending out the payment advices automatically to suppliers.
Currently we execute the payment run, generate the payment media (which at the same time creates the payment advices and sends them out by e-mail) and then we import the file into our bank system, where payments have to be approved by a finance manager.
We occasionally have the problem that the payments are not approved on the banking system on time - however the payment advices have already be sent by e-mail because the printout program does it at the same time as the payment file is created. Previously, because the payment notes were sent by post, we only sent them out after confirming that the payments had been actually executed in the banking system.
What the finance department is asking for is whether the payment advices can be sent by e-mail only after the payments have been approved at the bank (and for this to happen the payment file has to be generated in a previous step) - Is there any way of achieving this?
thank you

Hi Rafael,
For this you will have to do the following.
Frist check with the ABAPer that whether there is any std. Program or function module in the system that can sends mail.
1) With the help of ABAPer create a SAP Script form as per the requirements of Client as Payment Advice.
2) Do the Configuration required for the Correspondence.
3) You will have to develope a Z program or functionmodule to shoot mail as soon as the APP is completed. This you will have to do with the help of ABAper.
4) Last but not the least you wil haveto maintain the email addresses of the vendors in their master record.
Regards
JS

Email payment advice for multiple emails

Hi There,
I have configured the BTE 00002040, every thing works perfectly to send the payment advice to a single email id from vendor master but out client wants a copy of the payment advice also to sent to their group email id, so with the help of our abaper we are trying to hard code the group email id and try to send the email to both vendor email id and group email id but is it nor working.
Can any body tell me how to send the payment advice to multiple emails?
Thank you in advance
Madhu

Thank you Hugo,
We tried this but for some reason it is not working, i know some body else also suggested the same on SDN but no luck.
It works fine for one emaild from vendor master but not when we put the group email id in the program as a hard code.
pl let me know, if you have any other thoughts.
Thanks
Madhu

To send Payment advice note as Email to vendor

Hi
I like to know how can we send the payment advice note created after F110 run to be send as email to the vendor?
your help would be appreciated a lot
regards
auro

Hi Arvind,
Check out the following link
Re: f110 payment advice
Assign points if useful
Regards
Genie

Vendor payment advice through email

Hi gurus
i want to send vendor payment advice through email , i am using the form F110_IN_AVIS for payment advice
and from the report RFFOAT_P i want to send the email , is any configuration needed to send the email , or just i have to give selection detials properly and it will work ,
regards
m.a

Hi Afzal,
For sending Payment advice by E-Mail, "You need to copy SAMPLE_PROCESS_00002040 and adjust it to write code as per your requirement. This BTE runs for each payment advice note to be sent and in the module, it is mentioned 1=print, 2 = Fax and I=mail, so you can set your priority, that if an E-Mail address is maintained in the vendor master, send mail or if no E-mail address is maintained send Fax, and if both are not possible shoot a Print.
From Configuration side, you need to maintain the Z copy of SAMPLE_PROCESS_00002040 in FIBF transaction under the Process module of a customer without country or application indicator.
SAP Note 836169 - Consulting: Payment advice notes by email or fax.
Regards,
SAPFICO

Send AP payment advice e-mail to multiple e-mail addresses?

Similar Messages

Maybe you are looking for