Sending back your Adapter using DHL

Ok. I think I have exhausted all possibilities at this point. I've tried returning my adapter to the local Apple Store (they wouldn't take it), I tried calling the DHL number listed on the package to schedule a pick-up (the number was a vitamin company out on the west coast) and I tried to schedule a pick up (DHL no longer does domestic deliveries).
The good news is, Apple hasn't charged me for not returning the old adapter that was recalled. I have my new one. Should I just not worry about it and throw the old one away?

Ok. Now I wished I had called Apple Care awhile ago. I spoke with Dan and he was very helpful. First, he mentioned that in many cases, FedEx would take the DHL packages. But, when he heard they had not charged me yet, he checked with the RMA group and they said I could just pitch it.
Thanks for the advice!

Similar Messages

Configuring the Sender Axis SOAP Adapter

Hello,
I am trying to configure Sender Axis SOAP Adapter using PI 7.0
The regular inbound address for SOAP messages is: http://host:port/XISOAPAdapter/MessageServlet?channel=party:service:channel
But the inbound address for AXIS SOAP messages is:
http://host:port/XIAxisAdapter/MessageServlet?parameters
parameters ::= token ( u2018&u2019 token )*
token ::= name u2018=u2019 value
name ::= fieldname
value ::= fieldvalue
fileldname ::= u2018senderPartyu2019 | u2018senderServiceu2019 | u2018receiverPartyu2019 | u2018receiverServiceu2019 |
u2018interfaceu2019 | u2018interfaceNamespaceu2019 | u2018messageIdu2019 | u2018queueNameu2019
fieldvalue ::= urlencoded value
See this link: http://help.sap.com/saphelp_nw70/helpdata/en/45/a4f8bbdfdc0d36e10000000a114a6b/frameset.htm
Can someone give me an example of such URL?
Regards,
Gigi.

Hi,
Re: SOAP (Axis) Adapter
Thanks
Vikranth

I signed up for the edge program and need to send back my old phone. The instructions say I need to put it in the edge bag provided with my new phone order, but no bag is in the box. Can I get one at a store? Please respond!!

I signed up for the edge program and need to send back my old phone. The instructions say I need to put it in the edge bag provided with my new phone order, but no bag is in the box. Can I get one at a store? Please respond!!

monkeybuttqueen,
Thank you so much for reaching out to us today. I hope you are enjoying the new device! I do apologize that you didn't get the proper info sent to you to send back your old device. You can always print a label online from My Verizon. You can do that at www.verizonwireless.com/printlabel Pleaes keep us posted if you have any questions or concerns.
KevinR_VZW
Follow us on Twitter @VZWSupport

Hello, I am a user of the iPhone is not the place for bi çıkıcak turkey apple brand products and product support and equipment does not work as it used to fix and send back waiting for your help. Please support me in this regard quit

Hello, I am a user of the iPhone is not the place for bi çıkıcak turkey apple brand products and product support and equipment does not work as it used to fix and send back waiting for your help. Please support me in this regard quit

We are all iphone users just like you.
Do you have a question for fellow iphone users?

ACK send back but which Idoc Adapter

Hello,
I have the following scenario(party):
R3 -> XI -> Http
I am send orders from the R3 via XI to a customer. I'll get an status from the Http-Adapter that I want to send back to the R3. The definition for sending back are all done and fine. I've 2 Idoc-Adapter (Receiver). Adapter A is an old on used in an other scenario and the new on (adapter-B) with the special setting. When I am receiving the ACK from the HTTP-adapter how can I define wich idoc-Adapter has to be used. My problem ist that the adapter A is used which don't have the necessary settings and can't be changed. How/where can I define to use the adapter b for sendign back tke ACK to the R3.
Regards Jami

Hi Jami,
Receiver adapters that run on the Adapter Engine support system acknowledgments if they are requested by the sender. Acknowledgements are triggered when a message is successfully processed by the adapter or if an error occurs while it is being processed. Receiver adapters do not support application acknowledgments. The RNIF and CIDX adapters are exceptions to this rule, since they also support scenario-dependent application acknowledgments. Sender adapters of the Adapter Engine do not request any acknowledgments.
There is a guide to handle idoc acknowledgements, in sap xi. please refer,"how to handel acknowledgements for idoc" at,
https://websmp202.sap-ag.de/nw-howtoguides
Have look at "How To Handle Acknowledgments for IDoc" .
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe
I hope this clears all your doubts.
Regards,
abhy
PS: AWARD POINTS FOR HELPFUL ANSWERS.

Sending File as attachment using Mail adapter with naming convention

Dear All,
I am working on a scenario in which my sender file adapter is sending one file named 'ABC.ok' in one of the folders in application server. I have to send the same file with the same name to one of the folders at FTP and also to my customer at his email id.
I have used File Content onversion at the receiver side and has selected adapter specific attributes due to which the required file is getting generated at FTP folder with the same name as that of the source. But how to send the same file using the mail adapter by keeping same name as "ABC.ok". Kindly guide me out in this.
Regards,
NJ

what you need to do:
1) Select ASMA in Sender and receiver File CC...already done
2) Using the Dynamic Config UDF get the sender file name in the field Content-Type...for this you need to have a return statement in your UDF
3) now before pushing this file name to the Content-Type you have to append (concat)the actual type of the file content (xml, txt)
so your entire Content-Type node will have something like text/plain; name="abc.ok"
SAP Note has reference on how to do this:
https://service.sap.com/sap/support/notes/856599
From the note:
Q: How can I set the file name of a mail attachment?
Regards,
Abhishek.

Connecting your IPOD to your Car using a Pioneer Radio Adapter

Is there any easier way you can watch your videos on your IPOD using your Radio (Pioneer) Adapter. I had it working 3 times but the problems seems to be after I shut my car off, the adapter or the IPOD will not allow me to go back into the menu. I know I would press the Menu button continuously and the IPOD will take me straight into the menu. This is a cool feature to have because then your Ipod works like a Mini TV output for your car. Anyone has any suggestions!!!?????? Please hit me back up with a response.

I don't think it's really an "issue." Your iPod is fairly old if it does not have a color screen (probably the 4th gen model).
http://support.apple.com/kb/HT1353
Recent iPods have much better processors and can interact in more ways with the devices they are connected to through the dock connector, like your car's system. It's like a computer... an old computer cannot do many things a newer one can do, no matter what software is installed because there are hardware technology limitations.
Now, if that other iPod you tried was the same model you have (or earlier), and it worked, please post back.
Otherwise, you should refer to the documentation that came with the system, or online info that may be available from the car maker's web site, to read the system requirements for the iPod. If your iPod meets the requirements, please post back.

I bought iphone4 in china, and it broken when I was in USA. After I sending to your company. You send me a new phone, but this phone is locked phone. I can't use it. Because my sim card is from china

I bought iphone4 in china, the ss number is 82044JAVA4S, and it broken when I was in USA. After I sending to your company. You send me a new phone, but this phone is locked phone. I can't use it. Because my sim card is from china, so I think you shoulu give me a unlocked one.

I understand your frustration.
Fortunately for you, you can make your new phone to work; but to do so, you have to call your Chineese carrier and give them the IMEI number found on the SIM card of your iPhone.
They will then activate it and you will be able to use it.
It's NOT a matter of locked/unloked phone; it's a matter of activating (pairing) a SIM card with a phone !
Just call you Chineese carrier and have them register your SIM card with your new iPhone and you will be back in Business !

If you use DB2, send me your pool definition

Hi. If you use DB2 with weblogic, please send me your pool definition.
I want to make your pool creation as automatic as we can do it.
thanks
Joe

No, it's not just for convenience. The device needs to be restored as new, so that you can use it properly.
iOS: How to back up your data and set up your device as a new device - http://support.apple.com/kb/ht4137

Invalid Certificate Microsoft Outlook cannot sign or encrypt this message because you have no certificates which can be used to send from your e-mail address.

Hi,
I have a problem when trying to sign emails with an X.509 certificate in Outlook 2010. I constantly get the error message. The certificate is Verified for the email address I'm sending from.
"Invalid Certificate
Microsoft Outlook cannot sign or encrypt this message because you have no certificates which can be
used to send from your e-mail address."I have no problem with signing documents in Word 2010 with the same certificate, only when trying to send email.Every check I can perform confirms that there's nothing wrong with the certificate. Yet, Outlook still says it is invalid.I have even tried installing a second X.509 for the same email address just to check. Outlook doesn't seem to like either certificate.I know this has been posted before, but I'm completely stuck here.Thanks,~Dan

Hi,
You may have checked the option "Encrypt contents and attachments for outgoing messages" in Outlook, please uncheck this to test if the problem persists.
File -> Options -> Trust Center -> Trust Center Settings -> E-mail Security -> Clear the checkbox "Encrypt contents and attachments for outgoing messages" -> OK.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

HT201365 I just updated to ios 7 on my iPhone 4 how do you turn the apps off when your not using them? The old way of double clicking and then pressing the app until a red minus button comes doesn't work it opens it back up!?

I just updated to ios 7 on my iPhone 4 how do you turn the apps off when your not using them? The old way of double clicking and then pressing the app until a red minus button comes doesn't work it opens it back up!?

Double click home button, then swipe up on app picture (not the icon itself)

How to send images through PI using SOAP adapter

hi,
Can anybody tell me how to send images through PI using SOAP adapter.
Regards ,
Loveena

Hi Loveena,
only as attachments of a SOAP message.
Regards,
Udo

Invocation of SOAP Sender Adapter using Apache SOAP

Hi,
I'm trying to invoke the XI SOAP Sender Adapter using the Apache SOAP API. It seems that my message header is missing a few parameters (see exception below). Does anybody know which to set?
Regards,
Heiko
==========
Exception:
<?xml version='1.0'?>

<SOAP:Envelope xmlns:SOAP='http://schemas.xmlsoap.org/soap/envelope/'>
<SOAP:Body>
    <SOAP:Fault>
      <faultcode>SOAP:Server</faultcode>
      <faultstring>Server Error</faultstring>
      <detail>
        <s:SystemError xmlns:s='http://sap.com/xi/WebService/xi2.0'>
          <context>XIAdapter</context>
          <code>Exception</code>
          <text><![CDATA[
com.sap.aii.af.mp.module.ModuleException
     at com.sap.aii.af.mp.soap.ejb.XISOAPAdapterBean.process(XISOAPAdapterBean.java:502)
     at com.sap.aii.af.mp.module.ModuleLocalLocalObjectImpl3.process(ModuleLocalLocalObjectImpl3.java:103)
     at com.sap.aii.af.mp.ejb.ModuleProcessorBean.process(ModuleProcessorBean.java:227)
     at com.sap.aii.af.mp.processor.ModuleProcessorLocalLocalObjectImpl0.process(ModuleProcessorLocalLocalObjectImpl0.java:103)
     at com.sap.aii.af.mp.soap.web.MessageServlet.callModuleProcessor(MessageServlet.java:162)
     at com.sap.aii.af.mp.soap.web.MessageServlet.doPost(MessageServlet.java:507)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:392)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:345)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:323)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:865)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:240)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
     at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged1(Native Method)
     at java.security.AccessController.doPrivileged(AccessController.java:321)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:95)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:159)
Caused by: java.lang.Exception: Bubble configuration error: parameter 'XI.InterfaceNamespace' is missing
     at com.sap.aii.af.mp.soap.ejb.XISOAPAdapterBean.getParaRequired(XISOAPAdapterBean.java:895)
     at com.sap.aii.af.mp.soap.ejb.XISOAPAdapterBean.createDefaultMessageHeader(XISOAPAdapterBean.java:942)
     at com.sap.aii.af.mp.soap.ejb.XISOAPAdapterBean.setup(XISOAPAdapterBean.java:214)
     at com.sap.aii.af.mp.soap.ejb.XISOAPAdapterBean.process(XISOAPAdapterBean.java:496)
     ... 22 more
          ]]></text>
        </s:SystemError>
      </detail>
    </SOAP:Fault>
</SOAP:Body>
</SOAP:Envelope>

Hi Heiko,
You are missing the Namespace Parameter in the sender soap adapter configuration in XI3.0
Thanks
Prasad

On 15/12/2012 i send iphone 4s adapter to digi klang for Warranty. until today digi center still talk to me go back home and waiting.pls help Thank.

on 15/12/2012 i send iphone 4s adapter to digi klang for Warranty. until today digi center still talk to me go back home and waiting.pls help
Thank.

This is a USER to User technical Forum
There is no Apple presence on this forum
So nothing anyone here can do
As this is a public World wide Public forum I suggest you remove the document you have strangely decided to copy above .It looks like some form ID card

The internet pages don't display properly I'm using osx10.3.3, yahoo for example asks me to update, but I cant find out how to as the apple store just keeps sending back to the same page with no down load option...do i need to up date or is it just my mac

The internet pages don't display properly I'm using osx10.3.3, yahoo for example asks me to update, but I cant find out how, as the apple store just keeps sending back to the same page with no down load option...do i need to up date or is it just my mac

What Mac model do you have? You might be able to upgrade the OS to Tiger 10.4 or Leopard 10.5.
Even browsers for Tiger 10.4 will get the update message.
You could try a newer browser than Safari, which is obsolete, by downloading Firefox v2.0.0.20 at http://www.oldapps.com/mac/firefox.php
 Cheers, Tom

Sending back your Adapter using DHL

Similar Messages

Maybe you are looking for