Sending multiple mails to one guest

I receive a lot of mails. I would like to send multiple mails to one guest. Is it possible? How can I do it?

Hi,
I think you should create one Delivery Profile, with multiple Email Devices. Within the Delivery Profile you should add all the Email Devices you want to use.
If this Delivery Profile is active, you can add Active Devily Profile as the User Destination on the Destination page of the iBot.
Otherwise you can check if it works when you select 'Email' as the Specific Device.
Regards,
Stijn

Similar Messages

Can I send multiple photos on one e mail.

As the title says. Is it possible to send multiple photos on one e mail and if so how?
Many thanks.

There isn't an option for it.

I have four accounts on my mail application. but whenever i send a mail from one account, it goes through other account.

i have four accounts on my mail application. but whenever i send a mail from one account, it goes through other account.

Look at Mail / Accounts, then choose the Account icon. See if the Outgoing server box is set to the correct entry for each of your accounts.

Sending multiple attachments in one e-mail

Is there a way to send multiple spreadsheets via mail without it opening a new e-mail message everytime? For example, If I create a spreadsheet and choose "Share", "Send via Mail", "PDF" - It pops up a new e-mail with the pdf already attached. That's great. However, I want to continue to add spreadsheets to the same e-mail. If I open another spreadsheet and do the same thing the attachment is in a new blank e-mail instead of being added to the e-mail that is already opened. Is there some type of preference setting that can help with this?

Further thoughts:
If by "spreadsheet" you mean "sheet", you can print and choose "Open PDF in Preview" (instead of printing to a printer) then drag the sheets/pages you want into an email message. You will want to select "all sheets" in the print window. You will want to open the Preview sidebar.
If by "spreadsheet" you mean "document", printing to "Open PDF in Preview" creates new preview windows for me so it doesn't make the job any easier than dragging the PDFs from each email into one.
If by "spreadsheet" you mean "table", you can copy/paste tables into an email, at least in Apple's Mail application. Best if the tables do not have the "name" checkbox checked or if the name is left justified. The names end up justified with respect to the email versus the table. You can also copy/paste multiple items from a sheet at once.

Invoice output triggered once but sending multiple mails from the output

Hello Experts,
Need your help with a tricky issue in our system.
We have an output type defined to send invoice output as email. Lately we have an issue with this.
If we trigger the output in foreground it works fine. But when we create the invoices from batchjob it is triggering multiple emails for the same invoice. When we check the output in invoice it was triggered only once. Even in NAST also we have only one entry for these invoices. This issue is happening randomly not for all the invoices created through batch.
To nailed down the issue we have added code to update the application log in the output program. It wil update the application log in SLG1 transaction when ever the output program was called. Surprisingly even for the cases where the mail triggered multiple times we have only one entry in the log. It means even though the mail sent multiple times, it is calling the output porgam only once.
We are not able to replicate this issue even after mulitple trails.
Please suggest how we can find the root cause for this issue. All the ideas are welcome.
Thanks,
Srini

Hi
The problem could be in SO_DOCUMENT_SEND_API1 or in the program called to send the mail
SO_DOCUMENT_SEND_API1 places the mail in SOST (how many messages you can see there?)
If you see only one message the problem could be in the program to send the mail
Max

HOW TO SEND MULTIPLE MAILS USING EXTERNAL COMMUNICATION IN ACTIONS

Hi all,
we are working on a sales scenario in crm 5.0 ,currently we are able to send a mail to the particular BP only,what we want is mail should go to the multiple partners like contact person,prospect and user.can anyone help on this.
Thanks in advance
bye
ram

You can use the BADI: EXEC_METHODCALL_PPF for this. Use the piece of code below to get the guid, and then you can use CRM_ORDER_READ to get the partners. After that you can use the FM to send mails(Dont' remember the name right now) to send mails to all the partners. Hope this will help.
"ASSIGN io_appl_object to
DATA: lv_appl_object TYPE REF TO cl_doc_crm_order.
cast object to application object
lv_appl_object ?= io_appl_object.
CALL METHOD lv_appl_object->get_crm_obj_guid
RECEIVING
result = ls_guid.

E-mails stuck in queue when I try to send e-mail to one domain

When I try to send an e-mail to the one specific domain I'm getting an error message:
Primary target IP address resonded with: 554 policy violation. attempted failover to alternate host, but that did not succeed etc..
I have no problems with sending e-mails to most of the domains, exepct this one
What might that be?
Thank you in advance

Hi
I think this seems to be a problem at the receiving end
Things that might be wrong on your end as well which you need to check below
Do a (rDNS, telnet to your server to check the FQDN and IP Blacklists check)
Try creating a dedicated send connector for this domain alone for this address space alone and see the results . Select the option offer basic authentication only after starting TLS and see the results
Check in your fire wall if this type of connection "Private command : X-ANONYMOUSTLS" SMTP Policy Restrictions is set . You should make the modifications to the firewall to allow this traffic.
In your case i think mostly it should be the fire wall not allowing X-AnonymousTLS type connections
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
(MVP)

Users sends multiple emails for one email to be received

I have a user who states that she has to send multiple emails to a customer before she one is able to get through. She doesn't receive a bounce back from them. I recently suggested she remove an images from the emails, we have a corporate logo
that can be used in our signatures, as many of her customers are government and I figured they may be blocking the emails for this reason. Nothing seems to have helped and she still seems to be having the issue. This also occurs sometimes for some
of her customers and other times with others, so it doesn't seem specific to the customer. I have repaired Office and run a virus scan, the scan came up with minimal malware and removed it.

Hi,
Please follow these steps to create a test email in Outlook and send out:
1. Open Outlook, click New Email.
2. In the new window, edit To and Subject fields.
3. Click OPTION, check Request a Delivery Receipt.
4. Then click Send to send the test message.
Please check whether the test message is listed in the Sent Items folder or not. Also waiting for the Delivery Report of this message.
Thanks,
Winnie Liang
TechNet Community Support

Sending multiple files using one socket

Hi guys
I'm working on a simple app that sends multiple files over LAN or I-NET. The problem is that the app run seems to be non-deterministic. I keep getting this error on the client side:
java.io.UTFDataFormatException: malformed input around byte 5
        at java.io.DataInputStream.readUTF(Unknown Source)
        at java.io.DataInputStream.readUTF(Unknown Source)
        at service.DownloadManager.storeRawStream(DownloadManager.java:116)
        at service.DownloadManager.downloadFiles(DownloadManager.java:47)
        at manager.NetworkTransferClient$1.run(NetworkTransferClient.java:104)The byte position changes every time I run a transfer. The error is caused by this line: String fileName = in.readUTF(); Here's the complete code:
Client
private void storeRawStream() {
        try {
            FileOutputStream fileOut;
            int fileCount = in.readInt();
            for(int i=0; i<fileCount; i++) {
                byte data[] = new byte[BUFFER];
                String fileName = in.readUTF();
                fileOut = new FileOutputStream(new File(upload, fileName));
                long fileLength = in.readLong();
                for(int j=0; j<fileLength / BUFFER; j++) {
                    int totalCount = 0;
                    while(totalCount < BUFFER) {
                        int count = in.read(data, totalCount, BUFFER - totalCount);
                        totalCount += count;
                    fileOut.write(data, 0, totalCount);
                    fileOut.flush();
                    bytesRecieved += totalCount;
                // read the remaining bytes
                int count = in.read(data, 0, (int) (fileLength % BUFFER));
                fileOut.write(data, 0, count);
                fileOut.flush();
                fileOut.close();
                transferLog.append("File " + fileName + " recieved successfully.\n");
        } catch (Exception ex) {
            ex.printStackTrace();
    }Server
public void sendFiles(File[] files) throws Exception {
        byte data[] = new byte[BUFFER];
        FileInputStream fileInput;
        out.writeInt(files.length);
        for (int i=0; i<files.length; i++) {
            // send the file name
            out.writeUTF(files.getName());
// send the file length
out.writeLong(files[i].length());
fileInput = new FileInputStream(files[i]);
int count;
while((count = fileInput.read(data, 0, BUFFER)) != -1) {
out.write(data, 0, count);
bytesSent += count;
fileInput.close();
out.flush();
Does anybody know where's the problem? Thanx for any reply.

Send the length of each file ahead of each file, with DataOutputStream.writeLong().
When reading, read that long, then stop reading bytes when you've read exactly that length.

Not Working-LexicalParamater used to send multiple values with one prameter

Hi,
I am calling a reportname.rdf from the web(using apache webserver and url as follows:
http://localhost/cgi-bin/rwcgi60.exe?server=reportservername&report=acctActivity.rdf&userid=bizsystest/[email protected]&destype=cache&desformat=pdf&placeholdercolumnname='2,3,4'&docid=2
I have to send multiple values for fundid.
To accomplish this,
I created a placeholder column and initialized the value '0' and type taken as character(even though datatype of this column is number).
In sql query
select table1.c1, table2.c2 from table1, table2, table3, table4 where table1.cl in (&placeholdercolumname)
and table1.c2 = table2.c2(+)
and table3.doccode = :docid
From Web, URL contains the placeholdercolumnnmae='2,3,4'
Still its taking the value zero and output is generating.
Its not taking my newvalues ('2,3,4') in IN parameter.
I donot know the reason, where exactly is wrong.
Please help me to resolve.
2. My Second Issue:
Is there anyway, can we hide all key/value parameters send through the URL not visible to endusers
like servername, database userid and password and configure some where, so system can pickup each time when I run report.
Please help me to resolve.
Thanks,
Usha.

Hi Usha,
First of all, I assume that the place holder column you have specified is a UserParameter which you have specified on the command line. I don't think there is any direct way of doing that.
I created a placeholder column and initialized the value '0' and type taken as character(even though datatype of this column is number). If I infer correctly from what you are saying, you can't mix and match the datatypes of the columns, you can't define the parameter as a number and pass characters. I suggest you declare your parameter as a character with sufficient width to hold your LOV and then process them convert them to numbers.
Another suggestion is try replacing your "Placeholder" with another query construct.
For your Second issue,
You can use the Key-Map file Oracle Reports provides for the Web client. Please refer to
<ORACLE_HOME>\Report60\server\cgicmd.dat.
In the cgicmd.dat,you can alias your entire commandline with a single key and use that key in your URL.
Regards
Oracle Reports Team.

Send External Mail Through One Exchange Server Only

Hello,
I'm very stuck on something & new to exchange. I have two Exchange Servers:
MAIL1: Windows Server 2003 & Exchange 2007 SP2
MAIL2: Windows Server 2008 R2 & Exchange 2007 SP3
All accounts are going to move eventually to MAIL2. Until then, I would like any external emails sent, to be sent through MAIL1.
So far all all internal mail can be sent & received, and any external mail received. But I cannot send external mail from mailboxes on MAIL2 (just mine on MAIL2 at the minute). MAIL1 works fine for everything.
Can someone kindly explain what I should do to get all external mail sent through MAIL1?
Thanks,
Stacy

Hi Stacy,
We can just remove mail2 server from the mail2's send connector and add mail1 server to it.
Then we can send mails to outside via mail1.
Hope it is helpful
Thanks
Mavis
Mavis Huang
TechNet Community Support

ICal sending multiple invites for one event

I have an mixed environment where my Mac users running OSX 10.6.4 sync with our MS Exchange 07 using Mail 4.3 and iCal 4.0.3 . Everything is syncing correctly between the two environments, but we have run in to an annoying snag.
We have multiple users that have Read/Write Access to multiple calendars. Whenever somebody creates an event on one these calendars, even if the user is not an invitee they receive an email notification. The notification is on behalf of the calendar that the event was created for. If the user is an invitee they then receive 2 invites for the same event. This only happens with users who have Read/Write access to these calendars
I have searched high and low and can not find anybody that has the same issue as I do. Any assistance or advice in how to make so that users with Read/Write access only receive notifications to events they are invited to would be greatly appreciated. Thank you all for your time!
Cheers,
Nic Young

I think I know what can help. I also support Mac users in a mixed environment, and find that being able to access a Windows machine to test settings for my iCal users is very very helpful. If you do not have one, I could also fix this one by adding the user's account to my one Mac that runs Entourage.
On a PC: set up one of the problem accounts in Outlook, then go to Tools->Options & click on the Delegates tab. Click on a Delegate name (if they all have the same permission level, you can select all), then click the Permissions button. If the delegate have "Editor" permissions, there will be a little checked box that sends the delegate copies of all those meetings. De-select it.
Lemme know if you want Entourage instructions or if that does it for you.
The real question, of course, is why are there so many Exchange functions that iCal can't touch. Grrrr....

Can't send e-mail on one phone, but can on another

I got two iphones - one for myself and one for my wife. We have a family plan, and I set mine up first and hers second. Amongst the problems:
1. I can receive calls and she can't. The phones were activated at 1830 and 1845 on 6/30. I got the text message that my phone could receive calls at 0915 on 7/1. AT&T help line said her phone could not receive calls because 1) the old phone was still on (actually, both of our old phones were still on), and 2) I had not completed the syncing process by downloading music and photos (contacts had been synced) - I thought this was bull, as did the Apple Geniuses. Needless to say, I've tried their fixes for the above and it still doesn't work.
2. My wife (with a different .mac account) can't send any e-mails from her phone. She gets an error message that her e-mail was refused by the server "Cannot Send Mail - The sender address [email protected] was rejected by the server". We have Comcast ISP. My e-mails get sent from my phone and get through fine. She can view her e-mails in her box, however, they do not load (we get the spinning dashes). This was fixed when we did a soft reboot, but it happened again.
2a - How do I try to re-send the e-mail that is in the Outbox? I can view it, but it won't let me re-send it...
Thanks!

Hi sweettnlady,
If you are having issues sending email on your iPhone, you may find the following article helpful:
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Regards,
- Brenden

Best way to send multiple mails

i have an application which has to send 5000-15000 mails at a time, can any one give me an idea which is the best way to do this
i am using weblogic 8.1 and java 1.4
thanks in advance

i have an application which has to send 5000-15000
mails at a time, can any one give me an idea which is
the best way to do this Spamming are we?

Alert sending multiple mails

Hi All ,
     I have created an alert and the alert is sending mails two times.
     Same problem is happening for the default alert also.
     EBS version - 12.1.3
     OS - RHEL5
     DB - 11.2.0.1
Please suggest a solution.
Thanks,
PTA

Please see old threads for similar issue/discussion -- https://forums.oracle.com/community/developer/search.jspa?peopleEnabled=true&userID=&containerType=&container=&q=Multiple+AND+Alert+AND+Send
Thanks,
Hussein

Sending multiple mails to one guest

Similar Messages

Maybe you are looking for