Server 10.3.9 SMTP problems.

I have an xserve running 10.3.9 and the firewall is not allowing smtp traffic. I configured the in the advance setting to allow TCP traffic for ports 465 and 587, but still nothing. I just can not figure out hot to get the outbound email to work.

Hi kev.west-
No. It is not possible to install a lower version than the one that is shipped with the machine.
Luck-
-DaddyPaycheck

Similar Messages

Could anybody suggest how I must fix the outgoing mail server-SMTP problem, when it indicates to be offline? I couldn't manage to turn it on. Thank you!

Hello everybody!
Could anybody suggest how I must fix the outgoing mail server-SMTP problem, when it indicates to be offline?
I tried everythind and still couldn't manage to turn it on.
Thank you!

Hopefully I solved it....

Server Error. CrystalEnterprise.Smtp

Business Objects XI v2 ,
Error Message:server error. CrystalEnterprise.Smtp: SMTP_E_TCPSOCKET_OPEN(2)
How can I solve this problem ? I checked firewall ,smtp porrt number.
Please help .

Follow the doc to check whether SMTP is working on the server.
http://www.sdn.sap.com/irj/boc/go/portal/prtroot/docs/library/uuid/5045e7c3-773f-2b10-83ac-a98cc9aa0716?QuickLink=index&overridelayout=true
Also check whether you have entered the Domain name & Host name correctly.

SMTP problem with 10.4.2

I am having trouble sending email via SMTP like several others I've seen posted in this forum. In my case
1) This occurs from 2 different machines, both running Mac OS X 10.4.2, so I think the problem is generic to 10.4.2.
2) I can telnet to port 25 on the server in question, so it's not a network or DNS problem.
3) I can access other SMTP servers fine, so I don't think the problem is a general Mail bug, which would have generated 1000x more discussion traffic.
4) I can even access the server is question when I'm inside the firewall at work, where authentication is not required.
This would seem to point the finger at the authentication mechanism between the Mac and specific SMTP server software. I've discussed this in detail with the helpdesk people at my work and we've found that according to the SMTP server logs, the connection fails because of a lack of TLS (SSL), even though that check box is selected on both of my Macs. I'm guessing there is a problem with the Mail SSL and this version of the server software. The SMTP server is running PMDF version 6.2-1 on Solaris 9.
I thought I'd post this as a separate thread to collect information on the SMTP server software where there are problems. If you are having SMTP server problems and can find out the version of SMTP software running, we may find the pattern.
Raph

not sure if this is related, but mail 2.0.5 on OS10.4.3 doesn't let me change smtp servers consistently. often times, an smtp server that i have added in mail/preferences/accounts doesn't even show up as an option in the dropdown menu when a mail send fails. ever run into this?

Email error "Server Response: '451 Invalid Smtp l...

I am repeatedly getting this message when sending mail from smpt mail.btintenet.com :
Your server has unexpectedly terminated the connection. Possible causes for this include server problems, network problems, or a long period of inactivity. Subject 'Re: Case AVG#0000334806: [ ref:00D4000000086fU.5004000000ADEMJ:ref ] RE: AVG technical support - e-mail scanner gmail issues', Account: 'mail.btinternet.com', Server: 'mail.btinternet.com', Protocol: SMTP, Server Response: '451 Invalid Smtp line - Should end with CRLF', Port: 25, Secure(SSL): No, Server Error: 451, Error Number: 0x800CCC0F
I am also getting "password rejected" message. I have twice re-set my original password on the Servers page of my OE bt account, also in the smtp settigns. i have visited my BT-Yahoo inbox and find I am still logged in there, and can receive from there in OE.
Solved!
Go to Solution.

NOT SOLVED YET sorry, it is much more complicated:
All mails I send out of OE from either bt or gmail accounts, are sent with bt smtp server: mail.btinternet.com . Outgoing mail is not scanned by AVG n any case, and the problem occurs whether AVG email scanner is enabled or not.
All the HTML mails that I have created and sent to myself at least for the past month, whether from bt account to gmail or vice versa, or just bt to bt, cause error 451 etc when forwarded as attachments after I have received them.
BUT the problem does not occur when the original, forwarded email was written in Plain text, even if the mail in which it is forwarded is HTML.
Also, those same HTML mails that later cause the error when forwarded after they have been received, can be forwarded as attachments OK from the Sent box, but not from the Inbox after receipt.
But both HTML and plain text mails other people have sent me CAN be forwarded OK as attachments from either account.
Mails sent to myself from the BY Yahoo and gmail webmail can both be forwarded again in OE to bt without any error (but those from bt to bt end up in BT Yahoo spam folder, until manually checked as "Not Spam").
Is something in the bt smtp server causing the problem, since all mails I send from OE go through that server ...?

Can not send mail via the server no webmail no smtp relai

*relai host username and password is set correct:*
log:
Sep 8 22:00:07 macserver postfix/smtp[4939]: warning: SASL authentication failure: No worthy mechs found
Sep 8 22:00:07 macserver postfix/smtp[4939]: CD63667854: to=<[email protected]>, relay=smtp.1und1.de[212.227.15.167]:25, delay=2.1, delays=0/0.07/2/0, dsn=4.7.0, status=deferred (SASL authentication failed; cannot authenticate to server smtp.1und1.de[212.227.15.167]: no mechanism available)
*I did not understand that??!!*
*with my old server 10.5 this does run perfect*

I use Apple Mail. Since I upgraded to 10.6.1 my mailboxes go offline without reason. I have smtp problems although all settings are OK. When will all those problems be fixed by Apple?

Office Web Apps Server 2013 - Word Web App - Problem with Tab space

Hello We have Office Web Apps Server 2013 running with SharePoint 2013. Users Editing a Word document with Office Web Apps, can't use "Tabs", any Word document with Tabs; the tabs are replaced with a single space.
Has anyone noticed this? Is this a bug?
-thanks
thomas
-Tom

Yes, currently the Word Web App does not support
Tab Keyboard shortcut for editing document content .
For more information, you can have a look at
the article:
http://office.microsoft.com/en-us/office-online-help/keyboard-shortcuts-in-word-online-HA010378332.aspx?CTT=5&origin=HA010380212
http://social.technet.microsoft.com/Forums/en-US/3f5978d3-67a1-4c8c-981f-32493d72610b/office-web-apps-server-2013-word-web-app-problem-with-tab-space?forum=sharepointgeneral

Hyper link of public image(hyperlink or image) can not be saved on windows server 2012 and sharepoint 2010 problem

hyper link of public image(hyperlink or image) can not be saved on windows server 2012 and sharepoint 2010 problem, is this a bug?
thanks for any reply.
Rosone

It is not a bug, you might be using IE in Windows server 2012 and and browser might be restricting your site actions to respond properly.
Check this in a different browser or access site in a differ OS.
Adnan Amin MCT, SharePoint Architect | If you find this post useful kindly please mark it as an answer.

SCOM - -500 Internal Server Error - There is a problem with the resource you are looking for, and it cannot be displayed

Hi There,
Need your assistance on the issue that we are facing in prod environment.
We are able to open web console from remote machine and able to view monitoring pane as well as my workplace folders from console . Able to view and access alerts and other folder in the monitoring pane. We are able to view and access My Workplace folder
and able to view the reports in Favorite Reports folder. But when I click on run Report we are getting the below error "500 Internal Server Error - There is a problem with the resource you are looking for, and it cannot be displayed."
In our environment we have 3 servers one is SQL server and two are SCOM servers. Please advise how to fix this issue. Do we have to do any thing from SQL End?
Errors: Event ID 21029: Performance data from the OpsMgr connector could not be collected since opening the shared data failed with error "5L".
Event ID 6002 : Performance data from the Health Service could not be collected since opening the shared data failed with error 5L (Access is denied.).
Regards,
Sanjeev Kumar

Duplicate thread：
http://social.technet.microsoft.com/Forums/en-US/7675113e-49f0-4b3a-932b-4aceb3cfa981/scom-500-internal-server-error-there-is-a-problem-with-the-resource-you-are-looking-for-and-it?forum=operationsmanagerreporting
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Oracle VM Server 3.1.1 Network problem

I installed Oracle VM Server 3.1.1 on HP ProLiant BL460c G1 Blade Server.
Installation had no problem, but network doesn't work at all.
If I write "ipconfig -a" I have this response:
bond0 Link encap:Ethernet HWaddr 00:1E:0B:8D:5E:5E
inet addr:192.168.99.160 Bcast:192.168.99.255 Mask:255.255.255.0
UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
eth0 Link encap:Ethernet HWaddr 00:1E:0B:8D:5E:5E
UP BROADCAST SLAVE MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:16 Memory:f6000000-f6012000
eth1 Link encap:Ethernet HWaddr 00:1E:0B:8D:5E:54
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:16 Memory:fa000000-fa012800
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:46 errors:0 dropped:0 overruns:0 frame:0
TX packets:46 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:6820 (6.6 KiB) TX bytes:6820 (6.6 KiB)
So - I think - my system recognize network cards.
I can ping loopback and server ifself, but I cannot ping nothing more.
Can you help me to solve problem?
Thank you

This is output:
Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
Bonding Mode: fault-tolerance (active-backup)
Primary Slave: eth0 (primary_reselect always)
Currently Active Slave: none
MII Status: down
MII Polling Interval (ms): 250
Up Delay (ms): 500
Down Delay (ms): 500
Slave Interface: eth0
MII Status: down
Speed: 100 Mbps
Duplex: full
Link Failure Count: 0
Permanent HW addr: 00:1e:0b:8d:5e:5e
Slave queue ID: 0
Thank you

How to secure connection in sql server 2008? my main problem is which certificate should i add in mmc

i'm recently working on hardening of sql server 2008. now i face with a problem. my problem is how to secure connection in sql server 2008? my main problem is which certificate should i add in mmc? what are these certificates about?and guide
me in choosing the appropriate certificate.
and how should i know that the connection in sql server is secured?
plz guide me from the beginning cause i'm rookie in this subject.
thanks in advance.

Hi sqlfan,
Question 1: my problem is how to secure connection in sql server 2008?
Microsoft SQL Server can use Secure Sockets Layer (SSL) to encrypt data that is transmitted across a network between an instance of SQL Server and a client application. For more information about Encrypting Connections to SQL Server, please refer to the following
article:
http://technet.microsoft.com/en-us/library/ms189067(v=sql.105).aspx
Question 2: my main problem is which certificate should i add in mmc? what are these certificates about?and guide me in choosing the appropriate certificate.
To install a certificate in the Windows certificate store of the server computer, you will need to purchase/provision a certificate from a certificate authority first. So please go to a certificate authority to choose the appropriate certificate.
For SQL Server to load a SSL certificate, the certificate must meet the following conditions:
The certificate must be in either the local computer certificate store or the current user certificate store.
The current system time must be after the Valid from property of the certificate and before the Valid to property of the certificate.
The certificate must be meant for server authentication. This requires the Enhanced Key Usage property of the certificate to specify Server Authentication (1.3.6.1.5.5.7.3.1).
The certificate must be created by using the KeySpec option of AT_KEYEXCHANGE. Usually, the certificate's key usage property (KEY_USAGE) will also include key encipherment (CERT_KEY_ENCIPHERMENT_KEY_USAGE).
The Subject property of the certificate must indicate that the common name (CN) is the same as the host name or fully qualified domain name (FQDN) of the server computer. If SQL Server is running on a failover cluster, the common name must match the host
name or FQDN of the virtual server and the certificates must be provisioned on all nodes in the failover cluster.
Question 3: how should i know that the connection in sql server is secured?
If the certificate is configured to be used, and the value of the ForceEncryption option is set to Yes, all data transmitted across a network between SQL Server and the client application will be encrypted using the certificate. For more detail about this,
please refer to Configuring SSL for SQL Server in the following article:
http://technet.microsoft.com/en-us/library/ms189067(v=sql.105).aspx
If you have any question, please feel free to let me know.
Regards,
Donghui Li

Getting server error. CrystalEnterprise.Smtp: error when scheduled a webi

Getting server error. CrystalEnterprise.Smtp: error when scheduled a webi report to save as excel and send to an email account. What things to look for?

yes you should read the administration documents,
go to CMC, find "servers"
then "destination job server"
then click the "destination " tab
you will find some parameters, you have to configure it you.
the same scenario will be done to the "web intelligence job server"
good luck
Amr

Since upgrading iMac to osx lion I have been experiencing problems in mail, it spontaneously stops receiving and tells me it can't find the pop server and also the biggest problem is that when I send with an attachment the recipient doesn't receive it.

Since upgrading iMac to osx lion I have been experiencing problems in mail, it spontaneously stops receiving and tells me it can't find the pop server and also the biggest problem is that when I send with an attachment the recipient doesn't receive it.
I have to restart mail most times before it starts recieving or recognizes the pop server.
As I said a lot of recipients do not recieve my mails when there is an attachment or when I reply to their email.

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

502 - Web server received an invalid response while acting as a gateway or proxy server. There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream cont

I am getting error while accessing url of lyncweb.domain.com, dialin.domain.com and meet.domain.com pointing to RP server.
502 - Web server received an invalid response while acting as a gateway or proxy server.
There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream content server, it received an invalid response from the content server.
Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.

When i try with https://lyncfrontend.domain.local:4443 and https://lyncfrontend.domain.com:4443 both opens but when i open the external domain name i get certificate .
ARR version installed is 3.0
To throw more light on the configuration:
Lync 2013 implemented, internal domain name is : domain.local and external domain name is : domain.com
All servers in VMs are with 4 core processor, 24gb ram, 1TB drive.
Frontend : Windows 2012r2 with Lync 2012 Standard Edition - 1 No (192.168.10.100)
Edge : Windows 2012 with Lync 2012 Std - 1 No
(192.168.11.101 DMZ) in workgroup
ISS ARR Reverse Proxy 3.0 : Windows 2012 with ARR and IIS configured. (192.168.11.102)
Certificate : Internal Domain root CA for internal and External (Digicert).
Internal Network : 192.168.10.x /24
External Network (DMZ) : 192.168.11.x /24
Public Firewall NAT to DMZ ip for firewall and RP server. So having two public IP facing external network.
Edge has : sip.domain.com, webconf.domain.com, av.domain.com
IIS ARR RP server has : lyncdiscover.domain.com, lyncweb.domain.com, meet.domain.com, dialin.domain.com
Have created SRV record in public : _sip.tls.domain.com >5061>sip.domain.com, _sipfederationtls._tcp.domain.com>5061>sip.domain.com, _xmpp-server._tcp.domain.com>5269>sip.domain.com
Installed frontend server using MS Lync server 2013 step by step for anyone by Matt Landis, Lync MVP.
Internal AD Integrated DNS pointing Front-end
Type of Record FQDN
IP Description
A sip.domain.com
192.168.10.100 Address internal Front End or Director for internal network clients
A admin.domain.com
192.168.10.100 URL Administration pool
A DialIn.domain.com
192.168.10.100 URL Access to Dial In
A meet.domain.com
192.168.10.100 URL of Web services meeting
A lyncdiscoverinternal.domain.com
192.168.10.100 Register for Lync AutoDiscover service to internal users
A lyncdiscover.domain.com
192.168.10.100 Register for Lync AutoDiscover service to external users
SRV Service: _sipinternaltls Protocol: _tcp Port: 5061
sip.domain.com Record pointer services to internal customer connections using TLS
External DNS pointing Edge & Proxy
Type of Record FQDN
IP Endpoint
A sip.domain.com
x.x.x.100 Edge
A webconf.domain.com
x.x.x.100 Edge
A av.domain.com
x.x.x.100 Edge
SRV _sip._tls.domain.com
sip.domain.com: 443 Edge
SRV _sipfederationtls._tcp.domain.com
sip.domain.com:5061 Edge
A Meet.domain.com
x.x.x.110 Reverse Proxy
A Dialin.domain.com
x.x.x.110 Reverse Proxy
A lyncdiscover.domain.com
x.x.x.110 Reverse Proxy
A lyncweb.domain.com
x.x.x.110 Reverse Proxy
In IIS ARR proxy server following server farms are added and configured as per link ttp://y0av.me/2013/07/22/lync2013_iisarr/
In proxy server had setup only following server farm : While running remote connectivity web service test : meet, dialin, lyncdiscover and lyncweb.
The client inside works fine internally and through vpn. Login with external client also working fine. But we are getting error in MRCA as follows.
a) While testing remote connectivity for lync getting error : The certificate couldn't be validated because SSL negotiation wasn't successful. This could have occurred as a result of a network error or because of a problem with the certificate installation.
Certificate was installed properly.
b) For remote web test under Lync throws error : A Web exception occurred because an HTTP 502 - BadGateway response was received from IIS7.
HTTP Response Headers:
Content-Length: 1477
Content-Type: text/html
Date: Wed, 14 May 2014 10:03:40 GMT
Server: Microsoft-IIS/8.0
Elapsed Time: 1300 ms.
Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.

I cannot send mail from 1 of my iCloud accounts using mac mail- smtp problem

Slightly strange problem today with smtp server. For some reason timing out on po4 on one of my accounts. Another account uses po2 and is working fine. If I log in to icloud I can send messages so problem appears to be in configuration of mac mail. I have not changed anything, I can receive mail. When trying to change smtp I cannot edit the smtp box or if i do it reverts to what it was previously. Any suggestions ?

Whoops have jus seen this thread which looks like it is a more widespread problem than just me
http://discussions.apple.com/message/25443290

Server 10.3.9 SMTP problems.

Similar Messages

Maybe you are looking for