Server Config Help

Hi,
We have an application that requires 64-bit linux OS.
But I only have this 64-bit laptop for testing. Afaik linux is very hard to install in laptops because of drivers support issue.
Is there a laptop brand that is user-friendly to linux? I mean all the drivers are readily accepted or supported by the OS.
Can you help me in any other ways or workaround how to produce my own 64-bit linux test server? Using my 64-bit laptop as a given resource only.
Is Oracle Virtualization possible or VM perhaps?
Thanks
Edited by: KinsaKaUy? on 07-Sep-2011 21:53

I also think that Virtualbox will be your best option to install Enterprise Linux on a Latptop without having to worry about hardware limitations and kernel hardware driver support. Your RAM and disk space will have to be sufficient to operate your primary Windows OS plus Oracle Linux under Virtualbox including the application you are planning to install. It is not possible to guess without more details.
You download Virtualbox for your primary OS, e.g Virtualbox for Windows. Inside Virtualbox you have the option to install all sorts of operating systems your CPU supports.
Beware that you cannot allocate more than 3.5 GB of RAM to your Virtualbox guest OS, unless you install a 64-bit primary OS (Windows) that runs Virtualbox. You cannot install a 64-bit guest OS unless your Laptop has an appropriate x86_64 CPU. You can operate 32-bit software under a 64-bit OS, but not vise versa. x86_64 means that the CPU still contains the x86 32-bit instructions in hardware, and 32-bit software will not suffer any performance slowdown running in a 64-bit environment.
When buying a new Laptop, make sure it has a x86-64 bit CPU that supports VT-x. As of 2009, not all Intel processors supported VT-x, which Intel uses to segment its market.: See: Re: Virtualbox ORACLE Linux not installing
Most modern Laptops should support 8 GB of RAM and should come with a harddrive that will be sufficent enough for your task. I would consider 4 GB of RAM the absolute minimum you should consider when running Virtualbox.
Btw, you can download pre-build Developer VMs (for Oracle VM VirtualBox), which might save you the hassle to install the Guest OS: http://www.oracle.com/technetwork/community/developer-vm/index.html
Edited by: Dude on Sep 8, 2011 4:46 PM

Similar Messages

  • VI Server Config in LV 8.0

    Greetings All,
    I've recently installed LV 8.0, and have been starting the process of porting a distributed application (with an RT component) into a LV 8.0 project. So far, it hasn't been too promising. One of the main stumbling blocks appears to be figuring out the new way to configure VI Server over TCP using multiple application instances. In fact, I can't even get the "Real-Time System Manager" to work with the simplest of tests:
    To illustrate the difficulty, try this:
    1) Open a new project.
    2) Add the PXI RT target to the project.
    3) Add a new test VI (under the PXI target), and set it up to do something trivial. (Add some numbers, display a while loop counter, etc.)
    4) Deploy and run the test VI on the PXI
    5) Open the "Real-Time System Manager"
    Even after configuring VI server for both the project and the PXI, I get the following error message:
    "Real Time System Manager Error:
    Can not connect to [Remote_PXI].
    Please ensure that VI Server is enabled and this machine is allowed to connect" 
    It must have something to do with this new "multiple application instances" business in LV 8.0, but I really don't know what it is. I have used VI Server over TCP for several years and have never had any problems connecting remote PCs. And in fact, the same VI server config settings (for PC and PXI) that worked for LV 7.1 appear to be inncorrect for 8.0. I have set the parameters in the "master" options dialog, as well as in the project dialogs -- for both the PXI target, and the Desktop PC. (Default port 3363, TCP enabled for all clients and users.)
    Can anyone shed some light on this? If there was any option to bypass the LV project when working with the PXI in LV 8.0, I would be trying that next. However, since the NI engineers have eliminated this option from LV 8.0, my previous experience in this area appears to be completely obsolete. It looks like I'm completely stopped in my tracks until this difficulty is sorted out.
    Thanks in advance for any advice you can provide,
    -- D.
    www.movimed.com - Custom Imaging Solutions

    DAQ Dude,
    I know you've said you've been looking through the help, but have you checked this?  The TCP/IP must be enabled as it is not by default. 
    Complete the following steps to configure the VI Server.
    Select Tools»Options to display the Options dialog box.
    (Optional) The default VI Server configuration is suitable for most applications. Select VI Server: Configuration from the Category list if you need to change this default configuration. The default configuration allows ActiveX to call LabVIEW, but does not allow TCP/IP as a protocol. To use TCP/IP with other LabVIEW applications, place a checkmark in the TCP/IP checkbox and configure the VI Server: Machine Access settings.
    If you want to control browser access to the VIs or specify which VIs remote applications can control, configure the VI Server: Machine Access and Exported VIs options.
    Click the OK button to close the Options dialog box and save the changes.
    Note  If a target in a LabVIEW project supports the VI Server, you can configure the VI Server for the target using the Properties dialog box for the target. For example, use the My Computer Properties dialog box to configure the VI Server for the My Computer target.
    Error 66 is "LabVIEW:  The network connection was closed by the peer," as you suggest, but can be seen by improper VI server configuration settings as well. 

  • SBS 2011 VM and Server 2012 R2 Hyper-V host. After rebuilding the host image, no email is received, EMC states "You don't have sufficient permissions to view this data" when looking at organization config. Server config not shown on EMC.

    Hyper-V Host Server 2012 R2 x64 drive c:
    All VMs, including SBS 2011 Standard x64 are on drive d:
    I replaced my motherboard and defined a Marvell RAID 1 Mirror for my boot drive C:.  My drive D: containing all of my Hyper V machines remained untouched since the new MB had Intel Matrix Controller with RAID 5, as did the old MB.
    Since the C: drives are a few bytes smaller after configured as a RAID 1, I was unable to restore drive C from the image copy, so I rebuilt a new Hyper-V Host identical as possible using Server 2012 R2 x64.  I had to redefine the Hyper-V machines on
    the host, and the 1st time I brought it all (host and VMs) I had to reconfigure the NICs due to new MAC addresses, and verifying SBS 2011 DNS and DHCP for all physical and Hyper-V machines. Otherwise my Hyper-V SBS 2011 x(64) wasn't touched.
    Now the SBS Exchange 2010 is not receiving mail.  In the Exchange Management Console clicking on the Organization config gives me a highlighted error "You don't have sufficient permissions to view this data".  The Server
    Config is no longer on the EMC.  The Recipient Config looks fine.
    Outlook 2013 x64 connects to the Exchange Server, but no new mail appeared.  There were just a few older messages that came in since the last time I opened Outlook.  My public DNS on GoDaddy was not changed.  I did not change sending mail
    through my ISP Sonic.net.  The SBS internal DNS doesn't have an MX record, but I'm not sure it ever did since my GoDaddy public DNS has an MX record.
    I tried restoring to an earlier Image Copy, but that made no difference.  I'm using the Windows Backup from SBS 2011 for my daily image copy backups.
    - Michael Faklis

    Hi Michael,
    à
    After more research and running the Best Practices report from the EMC, I am missing a slew of ManagementRolesAndRoleGroups from the RBAC container.
    Based on your description, it seems that you have find the cause of this issue. On current situation, I still
    suggest that you should run
    SBS 2011 BPA and then check if can find some relevant errors. Just for a confirmation.
    Meanwhile, please refer to following articles and check if can help you.
    Apply
    missing Exchange 2010 RBAC Management Roles and Policies
    RBAC Manager
    (Exchange 2010 SP2)
    Hope this helps.
    Best regards,
    Justin Gu

  • APP Server Problem - HELP!!!!

    I've read all the previous postings and can't resolve this after a week of re-installs, deleting files, PATH, Environment Variable changes, etc. Can someone please provide definitive advice on this? I'm installing on XP for now. Server Log File is as follows:
    Thanks,
    Jeremy
    [#|2007-03-18T11:31:37.703-0400|WARNING|sun-appserver-pe8.2|javax.enterprise.tools.launcher|_ThreadID=10;|LAUNCHER005:Spaces in your PATH have been detected. The PATH must be consistently formated (e.g. C:\Program Files\Java\jdk1.5.0\bin; ) or the Appserver may not be able to start and/or stop.  Mixed quoted spaces in your PATH can cause problems, so the launcher will remove all double quotes before invoking the process. The most reliable solution would be to remove all spaces from your path before starting the Appservers components.  |#]
    [#|2007-03-18T11:31:37.718-0400|INFO|sun-appserver-pe8.2|javax.enterprise.tools.launcher|_ThreadID=10;|
    C:/Sun/java\bin\java
    -client
    -XX:PermSize=32m
    -XX:MaxPermSize=128m
    -XX:+CMSPermGenSweepingEnabled
    -XX:+CMSClassUnloadingEnabled
    -Xmx512m
    -XX:NewRatio=2
    -Dcom.sun.aas.defaultLogFile=C:/Sun/SunAppServer8/domains/creator/logs/server.log
    -Djava.endorsed.dirs=C:/Sun/SunAppServer8/lib/endorsed
    -Djava.security.policy=C:/Sun/SunAppServer8/domains/creator/config/server.policy
    -Djava.security.auth.login.config=C:/Sun/SunAppServer8/domains/creator/config/login.conf
    -Dsun.rmi.dgc.server.gcInterval=3600000
    -Dsun.rmi.dgc.client.gcInterval=3600000
    -Djavax.net.ssl.keyStore=C:/Sun/SunAppServer8/domains/creator/config/keystore.jks
    -Djavax.net.ssl.trustStore=C:/Sun/SunAppServer8/domains/creator/config/cacerts.jks
    -Djava.ext.dirs=C:/Sun/java/jre/lib/ext;C:/Sun/SunAppServer8/domains/creator/lib/ext;C:/Sun/SunAppServer8/derby/lib
    -Djdbc.drivers=org.apache.derby.jdbc.ClientDriver
    -Djavax.management.builder.initial=com.sun.enterprise.admin.server.core.jmx.AppServerMBeanServerBuilder
    -Dcom.sun.enterprise.config.config_environment_factory_class=com.sun.enterprise.config.serverbeans.AppserverConfigEnvironmentFactory
    -Dcom.sun.enterprise.taglibs=appserv-jstl.jar,jsf-impl.jar
    -Dcom.sun.enterprise.taglisteners=jsf-impl.jar
    -Djavax.xml.parsers.SAXParserFactory=com.sun.org.apache.xerces.internal.jaxp.SAXParserFactoryImpl
    -Dcom.sun.aas.configName=server-config
    -Dorg.xml.sax.parser=org.xml.sax.helpers.XMLReaderAdapter
    -Ddomain.name=creator
    -Djmx.invoke.getters=true
    -Djavax.xml.parsers.DocumentBuilderFactory=com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderFactoryImpl
    -Dcom.sun.aas.promptForIdentity=true
    -Dorg.xml.sax.driver=com.sun.org.apache.xerces.internal.parsers.SAXParser
    -Dcom.sun.aas.instanceRoot=C:/Sun/SunAppServer8/domains/creator
    -Djavax.xml.transform.TransformerFactory=com.sun.org.apache.xalan.internal.xsltc.trax.TransformerFactoryImpl
    -Dcom.sun.aas.domainName=creator
    -Djava.util.logging.manager=com.sun.enterprise.server.logging.ServerLogManager
    -Dproduct.name=Sun-Java-System/Application-Server
    -Dcom.sun.enterprise.overrideablejavaxpackages=javax.faces,javax.servlet.jsp.jstl,javax.xml.bind,javax.help
    -Dcom.sun.aas.configRoot=C:/Sun/SunAppServer8/config
    -Djava.library.path=C:\Sun\java\jre\bin\client;C:\Sun\SunAppServer8\lib;C:\Sun\SunAppServer8\lib;C:\Sun\java\bin;.;C:\WINDOWS\system32;C:\WINDOWS;C:\Sun\SunAppServer8\lib;C:\Sun\SunAppServer8\bin;C:\Sun\SunAppServer8\lib;C:\Sun\SunAppServer8\bin;C:\Sun\SunAppServer8\bin;C:\Sun\SunAppServer8\bin;C:\oraclexe\app\oracle\product\10.2.0\server\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\ATI Technologies\ATI Control Panel;C:\Program Files\Common Files\Roxio Shared\DLLShared\;C:\Program Files\QuickTime\QTSystem\
    -Dcom.sun.aas.instanceName=server
    -Dcom.sun.aas.processLauncher=SE
    -cp
    C:/Sun/java/lib/tools.jar;C:/Sun/SunAppServer8/lib/appserv-rt.jar;C:/Sun/SunAppServer8/lib\activation.jar;C:/Sun/SunAppServer8/lib\admin-cli.jar;C:/Sun/SunAppServer8/lib\appserv-admin.jar;C:/Sun/SunAppServer8/lib\appserv-assemblytool_es.jar;C:/Sun/SunAppServer8/lib\appserv-assemblytool_fr.jar;C:/Sun/SunAppServer8/lib\appserv-assemblytool_ja.jar;C:/Sun/SunAppServer8/lib\appserv-assemblytool_ko.jar;C:/Sun/SunAppServer8/lib\appserv-assemblytool_zh.jar;C:/Sun/SunAppServer8/lib\appserv-assemblytool_zh_CN.jar;C:/Sun/SunAppServer8/lib\appserv-cmp.jar;C:/Sun/SunAppServer8/lib\appserv-cmp_es.jar;C:/Sun/SunAppServer8/lib\appserv-cmp_fr.jar;C:/Sun/SunAppServer8/lib\appserv-cmp_ja.jar;C:/Sun/SunAppServer8/lib\appserv-cmp_ko.jar;C:/Sun/SunAppServer8/lib\appserv-cmp_zh.jar;C:/Sun/SunAppServer8/lib\appserv-cmp_zh_CN.jar;C:/Sun/SunAppServer8/lib\appserv-env.jar;C:/Sun/SunAppServer8/lib\appserv-ext.jar;C:/Sun/SunAppServer8/lib\appserv-jstl.jar;C:/Sun/SunAppServer8/lib\appserv-rt_es.jar;C:/Sun/SunAppServer8/lib\appserv-rt_fr.jar;C:/Sun/SunAppServer8/lib\appserv-rt_ja.jar;C:/Sun/SunAppServer8/lib\appserv-rt_ko.jar;C:/Sun/SunAppServer8/lib\appserv-rt_zh.jar;C:/Sun/SunAppServer8/lib\appserv-rt_zh_CN.jar;C:/Sun/SunAppServer8/lib\appserv-upgrade.jar;C:/Sun/SunAppServer8/lib\commons-launcher.jar;C:/Sun/SunAppServer8/lib\commons-launcher_es.jar;C:/Sun/SunAppServer8/lib\commons-launcher_fr.jar;C:/Sun/SunAppServer8/lib\commons-launcher_ja.jar;C:/Sun/SunAppServer8/lib\commons-launcher_ko.jar;C:/Sun/SunAppServer8/lib\commons-launcher_zh.jar;C:/Sun/SunAppServer8/lib\commons-launcher_zh_CN.jar;C:/Sun/SunAppServer8/lib\commons-logging.jar;C:/Sun/SunAppServer8/lib\deployhelp_es.jar;C:/Sun/SunAppServer8/lib\deployhelp_fr.jar;C:/Sun/SunAppServer8/lib\deployhelp_ja.jar;C:/Sun/SunAppServer8/lib\deployhelp_ko.jar;C:/Sun/SunAppServer8/lib\deployhelp_zh.jar;C:/Sun/SunAppServer8/lib\deployhelp_zh_CN.jar;C:/Sun/SunAppServer8/lib\dom.jar;C:/Sun/SunAppServer8/lib\driveradapter.jar;C:/Sun/SunAppServer8/lib\j2ee-svc.jar;C:/Sun/SunAppServer8/lib\j2ee.jar;C:/Sun/SunAppServer8/lib\j2ee_es.jar;C:/Sun/SunAppServer8/lib\j2ee_fr.jar;C:/Sun/SunAppServer8/lib\j2ee_ja.jar;C:/Sun/SunAppServer8/lib\j2ee_ko.jar;C:/Sun/SunAppServer8/lib\j2ee_zh.jar;C:/Sun/SunAppServer8/lib\j2ee_zh_CN.jar;C:/Sun/SunAppServer8/lib\jax-qname.jar;C:/Sun/SunAppServer8/lib\jaxr-api.jar;C:/Sun/SunAppServer8/lib\jaxr-impl.jar;C:/Sun/SunAppServer8/lib\jaxrpc-api.jar;C:/Sun/SunAppServer8/lib\jaxrpc-impl.jar;C:/Sun/SunAppServer8/lib\jdic_0_9.jar;C:/Sun/SunAppServer8/lib\jmxremote.jar;C:/Sun/SunAppServer8/lib\jmxremote_optional.jar;C:/Sun/SunAppServer8/lib\jsf-api.jar;C:/Sun/SunAppServer8/lib\jsf-impl.jar;C:/Sun/SunAppServer8/lib\mail.jar;C:/Sun/SunAppServer8/lib\PEtray.jar;C:/Sun/SunAppServer8/lib\relaxngDatatype.jar;C:/Sun/SunAppServer8/lib\rmissl.jar;C:/Sun/SunAppServer8/lib\saaj-api.jar;C:/Sun/SunAppServer8/lib\saaj-impl.jar;C:/Sun/SunAppServer8/lib\smbase.jar;C:/Sun/SunAppServer8/lib\smdb2.jar;C:/Sun/SunAppServer8/lib\sminformix.jar;C:/Sun/SunAppServer8/lib\smoracle.jar;C:/Sun/SunAppServer8/lib\smresource.jar;C:/Sun/SunAppServer8/lib\smspy.jar;C:/Sun/SunAppServer8/lib\smsqlserver.jar;C:/Sun/SunAppServer8/lib\smsybase.jar;C:/Sun/SunAppServer8/lib\smutil.jar;C:/Sun/SunAppServer8/lib\xalan.jar;C:/Sun/SunAppServer8/lib\xercesImpl.jar;C:/Sun/SunAppServer8/lib\xsdlib.jar;C:/Sun/SunAppServer8/lib/install/applications/jmsra/imqjmsra.jar;C:/Sun/SunAppServer8/imq/lib/jaxm-api.jar;C:/Sun/SunAppServer8/imq/lib/fscontext.jar;C:/Sun/SunAppServer8/lib/ant/lib/ant.jar
    com.sun.rave.tray.RavePEMain
    start
    display
    native|#]
    [#|2007-03-18T11:31:46.921-0400|INFO|sun-appserver-pe8.2|javax.enterprise.resource.jms|_ThreadID=10;|JMS5023: JMS service successfully started. Instance Name = imqbroker, Home = [C:\Sun\SunAppServer8\imq\bin].|#]
    [#|2007-03-18T11:31:46.937-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.core|_ThreadID=10;|CORE5098: AS Socket Service Initialization has been completed.|#]
    [#|2007-03-18T11:31:47.531-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.tools.admin|_ThreadID=10;|ADM0046:The Platform MBeanServer is available. It will be used to register Application Server MBeans. Platform MBeans will also be available for browsing while using standard JMX Console.|#]
    [#|2007-03-18T11:31:47.546-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.tools.admin|_ThreadID=10;|ADM0001:MBeanServer initialized successfully|#]
    [#|2007-03-18T11:31:47.812-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.core.security|_ThreadID=10;|SEC1143: Loading policy provider com.sun.enterprise.security.provider.PolicyWrapper.|#]
    [#|2007-03-18T11:31:48.296-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.web|_ThreadID=10;|Created virtual server server|#]
    [#|2007-03-18T11:31:48.296-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.web|_ThreadID=10;|Created virtual server __asadmin|#]
    [#|2007-03-18T11:31:48.984-0400|INFO|sun-appserver-pe8.2|javax.enterprise.resource.corba.ee.S1AS-ORB.rpc.transport|_ThreadID=10;|"IOP00710299: (INTERNAL) Successfully created IIOP listener on the specified host/port: 127.0.0.1/24700"|#]
    [#|2007-03-18T11:31:49.281-0400|INFO|sun-appserver-pe8.2|javax.enterprise.resource.corba.ee.S1AS-ORB.rpc.transport|_ThreadID=10;|"IOP00710299: (INTERNAL) Successfully created IIOP listener on the specified host/port: 127.0.0.1/22060"|#]
    [#|2007-03-18T11:31:49.281-0400|INFO|sun-appserver-pe8.2|javax.enterprise.resource.corba.ee.S1AS-ORB.rpc.transport|_ThreadID=10;|"IOP00710299: (INTERNAL) Successfully created IIOP listener on the specified host/port: 127.0.0.1/22061"|#]
    [#|2007-03-18T11:31:50.015-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.core.transaction|_ThreadID=10;|JTS5014: Recoverable JTS instance, serverId = [24700]|#]
    [#|2007-03-18T11:31:53.203-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.tools.admin|_ThreadID=10;|ADM1079: Initialization of AMX MBeans successful|#]
    [#|2007-03-18T11:31:53.515-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.tools.deployment|_ThreadID=10;|[AutoDeploy] Selecting file C:\Sun\SunAppServer8\lib\install\applications\MEjbApp.ear for autodeployment.|#]
    [#|2007-03-18T11:31:55.718-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.tools.deployment|_ThreadID=10;|DPL5109: EJBC - START of EJBC for [MEjbApp]|#]
    [#|2007-03-18T11:31:55.734-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.tools.deployment|_ThreadID=10;|Processing beans ...|#]
    [#|2007-03-18T11:31:55.781-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.tools.deployment|_ThreadID=10;|DPL5110: EJBC - END of EJBC for [MEjbApp]|#]
    [#|2007-03-18T11:31:56.000-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.tools.deployment|_ThreadID=10;|Total Deployment Time: 1688 msec, Total EJB Compiler Module Time: 63 msec, Portion spent EJB Compiling: 3%
    Breakdown of EJBC Module Time: Total Time for EJBC: 63 msec, CMP Generation: 0 msec (0%), Java Compilation: 0 msec (0%), RMI Compilation: 0 msec (0%), JAX-RPC Generation: 47 msec (74%),
    |#]
    [#|2007-03-18T11:31:56.093-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.tools.deployment|_ThreadID=10;|deployed with moduleid = MEjbApp|#]
    [#|2007-03-18T11:31:56.203-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.tools.admin|_ThreadID=10;|ADM1041:Sent the event to instance:[ApplicationDeployEvent -- reference-added MEjbApp]|#]
    [#|2007-03-18T11:31:56.281-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.tools.admin|_ThreadID=10;|ADM1042:Status of dynamic reconfiguration event processing:[success]|#]
    [#|2007-03-18T11:31:56.296-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.tools.admin|_ThreadID=10;|ADM1041:Sent the event to instance:[ApplicationDeployEvent -- deploy MEjbApp]|#]
    [#|2007-03-18T11:31:56.437-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.ejb|_ThreadID=10;|Instantiated container for: ejbName: MEJBBean; containerId: 76954462832623616|#]
    [#|2007-03-18T11:31:56.562-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.core.classloading|_ThreadID=10;|LDR5010: All ejb(s) of [MEjbApp] loaded successfully!|#]
    [#|2007-03-18T11:31:56.562-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.tools.admin|_ThreadID=10;|ADM1042:Status of dynamic reconfiguration event processing:[success]|#]
    [#|2007-03-18T11:31:56.562-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.tools.deployment|_ThreadID=10;|[AutoDeploy] Successfully autodeployed : C:\Sun\SunAppServer8\lib\install\applications\MEjbApp.ear.|#]
    [#|2007-03-18T11:31:56.578-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.tools.deployment|_ThreadID=10;|[AutoDeploy] Selecting file C:\Sun\SunAppServer8\lib\install\applications\__ejb_container_timer_app.ear for autodeployment.|#]
    [#|2007-03-18T11:31:56.875-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.tools.deployment|_ThreadID=10;|DPL5109: EJBC - START of EJBC for [__ejb_container_timer_app]|#]
    [#|2007-03-18T11:31:59.890-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.tools.deployment|_ThreadID=10;|Processing beans ...|#]
    [#|2007-03-18T11:31:59.906-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.tools.deployment|_ThreadID=10;|DPL5110: EJBC - END of EJBC for [__ejb_container_timer_app]|#]
    [#|2007-03-18T11:32:00.046-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.tools.deployment|_ThreadID=10;|Total Deployment Time: 3468 msec, Total EJB Compiler Module Time: 3031 msec, Portion spent EJB Compiling: 87%
    Breakdown of EJBC Module Time: Total Time for EJBC: 3031 msec, CMP Generation: 594 msec (19%), Java Compilation: 2359 msec (77%), RMI Compilation: 0 msec (0%), JAX-RPC Generation: 16 msec (0%),
    |#]
    [#|2007-03-18T11:32:00.109-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.tools.deployment|_ThreadID=10;|deployed with moduleid = __ejb_container_timer_app|#]
    [#|2007-03-18T11:32:00.156-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.tools.admin|_ThreadID=10;|ADM1041:Sent the event to instance:[ApplicationDeployEvent -- reference-added __ejb_container_timer_app]|#]
    [#|2007-03-18T11:32:00.187-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.tools.admin|_ThreadID=10;|ADM1042:Status of dynamic reconfiguration event processing:[success]|#]
    [#|2007-03-18T11:32:00.203-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.tools.admin|_ThreadID=10;|ADM1041:Sent the event to instance:[ApplicationDeployEvent -- deploy __ejb_container_timer_app]|#]
    [#|2007-03-18T11:32:00.343-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.ejb|_ThreadID=10;|Instantiated container for: ejbName: TimerBean; containerId: 76954463102959616|#]
    [#|2007-03-18T11:32:00.656-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.ejb|_ThreadID=10;|EJB5109:EJB Timer Service started successfully for datasource [jdbc/__TimerPool]|#]
    [#|2007-03-18T11:32:00.656-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.core.classloading|_ThreadID=10;|LDR5010: All ejb(s) of [__ejb_container_timer_app] loaded successfully!|#]
    [#|2007-03-18T11:32:00.656-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.tools.admin|_ThreadID=10;|ADM1042:Status of dynamic reconfiguration event processing:[success]|#]
    [#|2007-03-18T11:32:00.656-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.tools.deployment|_ThreadID=10;|[AutoDeploy] Successfully autodeployed : C:\Sun\SunAppServer8\lib\install\applications\__ejb_container_timer_app.ear.|#]
    [#|2007-03-18T11:32:00.656-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.web|_ThreadID=10;|WEB0302: Starting Sun-Java-System/Application-Server.|#]
    [#|2007-03-18T11:32:00.718-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.web|_ThreadID=10;|WEB0100: Loading web module [__default-admingui] in virtual server [__asadmin] at []|#]
    [#|2007-03-18T11:32:00.796-0400|WARNING|sun-appserver-pe8.2|javax.enterprise.system.container.web|_ThreadID=10;|WEB0500: default-locale attribute of locale-charset-info element has been deprecated and is being ignored. Use default-charset attribute of parameter-encoding element instead|#]
    [#|2007-03-18T11:32:00.890-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.web|_ThreadID=10;|WEB0100: Loading web module [adminapp] in virtual server [__asadmin] at [web1]|#]
    [#|2007-03-18T11:32:00.906-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.web|_ThreadID=10;|WEB0100: Loading web module [admingui] in virtual server [__asadmin] at [asadmin]|#]
    [#|2007-03-18T11:32:00.921-0400|WARNING|sun-appserver-pe8.2|javax.enterprise.system.container.web|_ThreadID=10;|WEB0500: default-locale attribute of locale-charset-info element has been deprecated and is being ignored. Use default-charset attribute of parameter-encoding element instead|#]
    [#|2007-03-18T11:32:00.953-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.web|_ThreadID=10;|WEB0100: Loading web module [com_sun_web_ui] in virtual server [__asadmin] at [com_sun_web_ui]|#]
    [#|2007-03-18T11:32:01.062-0400|INFO|sun-appserver-pe8.2|org.apache.catalina.core.StandardEngine|_ThreadID=10;|Starting Servlet Engine: Sun-Java-System/Application-Server|#]
    [#|2007-03-18T11:32:02.656-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.web|_ThreadID=10;|Initializing Grizzly Non-Blocking Mode|#]
    [#|2007-03-18T11:32:02.656-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.web|_ThreadID=10;|WEB0703: Initializing Sun-Java-System/Application-Server-PE HTTP/1.1 on 29080|#]
    [#|2007-03-18T11:32:02.671-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.web|_ThreadID=10;|WEB0712: Starting Sun-Java-System/Application-Server-PE HTTP/1.1 on 29080|#]
    [#|2007-03-18T11:32:02.734-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.web|_ThreadID=10;|Initializing Grizzly Blocking Mode|#]
    [#|2007-03-18T11:32:02.734-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.web|_ThreadID=10;|WEB0703: Initializing Sun-Java-System/Application-Server-PE HTTP/1.1 on 22043|#]
    [#|2007-03-18T11:32:02.734-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.web|_ThreadID=10;|WEB0712: Starting Sun-Java-System/Application-Server-PE HTTP/1.1 on 22043|#]
    [#|2007-03-18T11:32:02.781-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.web|_ThreadID=10;|Initializing Grizzly Non-Blocking Mode|#]
    [#|2007-03-18T11:32:02.781-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.web|_ThreadID=10;|WEB0703: Initializing Sun-Java-System/Application-Server-PE HTTP/1.1 on 25848|#]
    [#|2007-03-18T11:32:02.781-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.web|_ThreadID=10;|WEB0712: Starting Sun-Java-System/Application-Server-PE HTTP/1.1 on 25848|#]
    [#|2007-03-18T11:33:02.968-0400|SEVERE|sun-appserver-pe8.2|javax.enterprise.system.core|_ThreadID=10;|Service com.sun.enterprise.admin.server.core.JmxConnectorLifecycle@1a428d5 cannot be started! : com.sun.appserv.server.ServerLifecycleException: Cannot bind to URL [rmi://192.168.61.2:29686/management/rmi-jmx-connector]: javax.naming.CommunicationException [Root exception is java.rmi.ConnectIOException: error during JRMP connection establishment; nested exception is:
         java.net.SocketTimeoutException: Read timed out]|#]
    [#|2007-03-18T11:33:02.968-0400|SEVERE|sun-appserver-pe8.2|javax.enterprise.system.core|_ThreadID=10;|CORE5071: An error occured during initialization
    com.sun.appserv.server.ServerLifecycleException: Cannot bind to URL [rmi://192.168.61.2:29686/management/rmi-jmx-connector]: javax.naming.CommunicationException [Root exception is java.rmi.ConnectIOException: error during JRMP connection establishment; nested exception is:
         java.net.SocketTimeoutException: Read timed out]
         at com.sun.enterprise.admin.server.core.JmxConnectorLifecycle.onStartup(JmxConnectorLifecycle.java:104)
         at com.sun.enterprise.server.ApplicationServer.onStartup(ApplicationServer.java:300)
         at com.sun.enterprise.server.PEMain.run(PEMain.java:294)
         at com.sun.enterprise.server.PEMain.main(PEMain.java:220)
         at com.sun.rave.tray.RavePEMain.main(RavePEMain.java:37)
    Caused by: java.io.IOException: Cannot bind to URL [rmi://192.168.61.2:29686/management/rmi-jmx-connector]: javax.naming.CommunicationException [Root exception is java.rmi.ConnectIOException: error during JRMP connection establishment; nested exception is:
         java.net.SocketTimeoutException: Read timed out]
         at javax.management.remote.rmi.RMIConnectorServer.newIOException(RMIConnectorServer.java:814)
         at javax.management.remote.rmi.RMIConnectorServer.start(RMIConnectorServer.java:431)
         at com.sun.enterprise.admin.jmx.remote.server.JmxConnectorServerDriver.startConnectorServer(JmxConnectorServerDriver.java:177)
         at com.sun.enterprise.admin.server.core.JmxConnectorLifecycle.onStartup(JmxConnectorLifecycle.java:95)
         ... 4 more
    Caused by: javax.naming.CommunicationException [Root exception is java.rmi.ConnectIOException: error during JRMP connection establishment; nested exception is:
         java.net.SocketTimeoutException: Read timed out]
         at com.sun.jndi.rmi.registry.RegistryContext.bind(RegistryContext.java:122)
         at com.sun.jndi.toolkit.url.GenericURLContext.bind(GenericURLContext.java:208)
         at javax.naming.InitialContext.bind(InitialContext.java:359)
         at javax.management.remote.rmi.RMIConnectorServer.bind(RMIConnectorServer.java:635)
         at javax.management.remote.rmi.RMIConnectorServer.start(RMIConnectorServer.java:427)
         ... 6 more
    Caused by: java.rmi.ConnectIOException: error during JRMP connection establishment; nested exception is:
         java.net.SocketTimeoutException: Read timed out
         at sun.rmi.transport.tcp.TCPChannel.createConnection(TCPChannel.java:274)
         at sun.rmi.transport.tcp.TCPChannel.newConnection(TCPChannel.java:171)
         at sun.rmi.server.UnicastRef.newCall(UnicastRef.java:306)
         at sun.rmi.registry.RegistryImpl_Stub.bind(Unknown Source)
         at com.sun.jndi.rmi.registry.RegistryContext.bind(RegistryContext.java:116)
         ... 10 more
    Caused by: java.net.SocketTimeoutException: Read timed out
         at com.sun.enterprise.server.ss.ASInputStream.waitForSelect(ASInputStream.java:123)
         at com.sun.enterprise.server.ss.ASInputStream.read(ASInputStream.java:81)
         at com.sun.enterprise.server.ss.ASInputStream.read(ASInputStream.java:73)
         at java.io.BufferedInputStream.fill(BufferedInputStream.java:218)
         at java.io.BufferedInputStream.read(BufferedInputStream.java:235)
         at java.io.DataInputStream.readByte(DataInputStream.java:241)
         at sun.rmi.transport.tcp.TCPChannel.createConnection(TCPChannel.java:215)
         ... 14 more
    |#]
    [#|2007-03-18T11:33:02.968-0400|SEVERE|sun-appserver-pe8.2|javax.enterprise.system.core|_ThreadID=10;|Server Startup failed. Exiting...|#]
    [#|2007-03-18T11:33:02.968-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.core|_ThreadID=10;|Server shutdown in progress...|#]
    [#|2007-03-18T11:33:02.968-0400|WARNING|sun-appserver-pe8.2|javax.enterprise.system.core|_ThreadID=10;|CORE5061: Exception :
    com.sun.appserv.server.ServerLifecycleException
         at com.sun.enterprise.admin.server.core.JmxConnectorLifecycle.onShutdown(JmxConnectorLifecycle.java:122)
         at com.sun.enterprise.server.ApplicationServer.onShutdown(ApplicationServer.java:414)
         at com.sun.enterprise.server.PEMain.run(PEMain.java:317)
         at com.sun.enterprise.server.PEMain.main(PEMain.java:220)
         at com.sun.rave.tray.RavePEMain.main(RavePEMain.java:37)
    |#]
    [#|2007-03-18T11:33:02.968-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.web|_ThreadID=10;|WEB0303: Stopping Sun-Java-System/Application-Server.|#]
    [#|2007-03-18T11:33:02.968-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.web|_ThreadID=10;|WEB0713: Stopping Sun-Java-System/Application-Server-PE HTTP/1.1 on 29080|#]
    [#|2007-03-18T11:33:02.968-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.web|_ThreadID=10;|WEB0713: Stopping Sun-Java-System/Application-Server-PE HTTP/1.1 on 22043|#]
    [#|2007-03-18T11:33:02.968-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.web|_ThreadID=10;|WEB0713: Stopping Sun-Java-System/Application-Server-PE HTTP/1.1 on 25848|#]
    [#|2007-03-18T11:33:03.125-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.core|_ThreadID=10;|CORE5051: Shutting down all J2EE applications ...|#]
    [#|2007-03-18T11:33:03.140-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.ejb|_ThreadID=10;|EJB5122:EJB Timer Service shutdown at [2007/03/18 11:33:03]|#]
    [#|2007-03-18T11:33:03.140-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.core|_ThreadID=10;|CORE 5060 :  Stopping all J2EE Connector 1.5 Compliant resource adapters ...|#]
    [#|2007-03-18T11:33:03.140-0400|INFO|sun-appserver-pe8.2|javax.enterprise.resource.resourceadapter|_ThreadID=10;|RAR7094: __xa shutdown successfully.|#]
    [#|2007-03-18T11:33:03.140-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.core|_ThreadID=10;|CORE 5061 : Resource adapters Stop() Complete|#]
    [#|2007-03-18T11:33:03.140-0400|INFO|sun-appserver-pe8.2|javax.enterprise.system.core|_ThreadID=10;|CORE5052: Application shutdown complete.|#]
    [#|2007-03-18T11:33:03.656-0400|INFO|sun-appserver-pe8.2|javax.enterprise.resource.jms|_ThreadID=10;|JMS5025: JMS service shutting down.|#]
    [#|2007-03-18T11:33:03.890-0400|INFO|sun-appserver-pe8.2|javax.enterprise.resource.jms|_ThreadID=10;|JMS5026: JMS service shutdown complete.|#]
    [#|2007-03-18T11:33:03.890-0400|SEVERE|sun-appserver-pe8.2|javax.enterprise.system.core|_ThreadID=10;|Server stopped due to Server startup failure.|#]
    [#|2007-03-18T11:38:11.046-0400|WARNING|sun-appserver-pe8.2|javax.enterprise.tools.launcher|_ThreadID=10;|LAUNCHER005:Spaces in your PATH have been detected. The PATH must be consistently formated (e.g. C:\Program Files\Java\jdk1.5.0\bin; ) or the Appserver may not be able to start and/or stop.  Mixed quoted spaces in your PATH can cause problems, so the launcher will remove all double quotes before invoking the process. The most reliable solution would be to remove all spaces from your path before starting the Appservers components.  |#]
    [#|2007-03-18T11:38:11.046-0400|INFO|sun-appserver-pe8.2|javax.enterprise.tools.launcher|_ThreadID=10;|
    C:/Sun/java\bin\java
    -client
    -XX:PermSize=32m
    -XX:MaxPermSize=128m
    -XX:+CMSPermGenSweepingEnabled
    -XX:+CMSClassUnloadingEnabled
    -Xmx512m
    -XX:NewRatio=2
    -Dcom.sun.aas.defaultLogFile=C:/Sun/SunAppServer8/domains/creator/logs/server.log
    -Djava.endorsed.dirs=C:/Sun/SunAppServer8/lib/endorsed
    -Djava.security.policy=C:/Sun/SunAppServer8/domains/creator/config/server.policy
    -Djava.security.auth.login.config=C:/Sun/SunAppServer8/domains/creator/config/login.conf
    -Dsun.rmi.dgc.server.gcInterval=3600000
    -Dsun.rmi.dgc.client.gcInterval=3600000
    -Djavax.net.ssl.keyStore=C:/Sun/SunAppServer8/domains/creator/config/keystore.jks
    -Djavax.net.ssl.trustStore=C:/Sun/SunAppServer8/domains/creator/config/cacerts.jks
    -Djava.ext.dirs=C:/Sun/java/jre/lib/ext;C:/Sun/SunAppServer8/domains/creator/lib/ext;C:/Sun/SunAppServer8/derby/lib
    -Djdbc.drivers=org.apache.derby.jdbc.ClientDriver
    -Djavax.management.builder.initial=com.sun.enterprise.admin.server.core.jmx.AppServerMBeanServerBuilder
    -Dcom.sun.enterprise.config.config_environment_factory_class=com.sun.enterprise.config.serverbeans.AppserverConfigEnvironmentFactory
    -Dcom.sun.enterprise.taglibs=appserv-jstl.jar,jsf-impl.jar
    -Dcom.sun.enterprise.taglisteners=jsf-impl.jar
    -Djavax.xml.parsers.SAXParserFactory=com.sun.org.apache.xerces.internal.jaxp.SAXParserFactoryImpl
    -Dcom.sun.aas.configName=server-config
    -Dorg.xml.sax.parser=org.xml.sax.helpers.XMLReaderAdapter
    -Ddomain.name=creator
    -Djmx.invoke.getters=true
    -Djavax.xml.parsers.DocumentBuilderFactory=com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderFactoryImpl
    -Dcom.sun.aas.promptForIdentity=true
    -Dorg.xml.sax.driver=com.sun.org.apache.xerces.internal.parsers.SAXParser
    -Dcom.sun.aas.instanceRoot=C:/Sun/SunAppServer8/domains/creator
    -Djavax.xml.transform.TransformerFactory=com.sun.org.apache.xalan.internal.xsltc.trax.TransformerFactoryImpl
    -Dcom.sun.aas.domainName=creator
    -Djava.util.logging.manager=com.sun.enterprise.server.logging.ServerLogManager
    -Dproduct.name=Sun-Java-System/Application-Server
    -Dcom.sun.enterprise.overrideablejavaxpackages=javax.faces,javax.servlet.jsp.jstl,javax.xml.bind,javax.help
    -Dcom.sun.aas.configRoot=C:/Sun/SunAppServer8/config
    -Djava.library.path=C:\Sun\java\jre\bin\client;C:\Sun\SunAppServer8\lib;C:\Sun\SunAppServer8\lib;C:\Sun\java\bin;.;C:\WINDOWS\system32;C:\WINDOWS;C:\Sun\SunAppServer8\lib;C:\Sun\SunAppServer8\bin;C:\Sun\SunAppServer8\lib;C:\Sun\SunAppServer8\bin;C:\Sun\SunAppServer8\bin;C:\Sun\SunAppServer8\bin;C:\oraclexe\app\oracle\product\10.2.0\server\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\ATI Technologies\ATI Control Panel;C:\Program Files\Common Files\Roxio Shared\DLLShared\;C:\Program Files\QuickTime\QTSystem\
    -Dcom.sun.aas.instanceName=server
    -Dcom.sun.aas.processLauncher=SE
    -cp
    C:/Sun/java/lib/tools.jar;C:/Sun/SunAppServer8/lib/appserv-rt.jar;C:/Sun/SunAppServer8/lib\activation.jar;C:/Sun/SunAppServer8/lib\admin-cli.jar;C:/Sun/SunAppServer8/lib\appserv-admin.jar;C:/Sun/SunAppServer8/lib\appserv-assemblytool_es.jar;C:/Sun/SunAppServer8/lib\appserv-assemblytool_fr.jar;C:/Sun/SunAppServer8/lib\appserv-assemblytool_ja.jar;C:/Sun/SunAppServer8/lib\appserv-assemblytool_ko.jar;C:/Sun/SunAppServer8/lib\appserv-assemblytool_zh.jar;C:/Sun/SunAppServer8/lib\appserv-assemblytool_zh_CN.jar;C:/Sun/SunAppServer8/lib\appserv-cmp.jar;C:/Sun/SunAppServer8/lib\appserv-cmp_es.jar;C:/Sun/SunAppServer8/lib\appserv-cmp_fr.jar;C:/Sun/SunAppServer8/lib\appserv-cmp_ja.jar;C:/Sun/SunAppServer8/lib\appserv-cmp_ko.jar;C:/Sun/SunAppServer8/lib\appserv-cmp_zh.jar;C:/Sun/SunAppServer8/lib\appserv-cmp_zh_CN.jar;C:/Sun/SunAppServer8/lib\appserv-env.jar;C:/Sun/SunAppServer8/lib\appserv-ext.jar;C:/Sun/SunAppServer8/lib\appserv-jstl.jar;C:/Sun/SunAppServer8/lib\appserv-rt_es.jar;C:/Sun/SunAppServer8/lib\appserv-rt_fr.jar;C:/Sun/SunAppServer8/lib\appserv-rt_ja.jar;C:/Sun/SunAppServer8/lib\appserv-rt_ko.jar;C:/Sun/SunAppServer8/lib\appserv-rt_zh.jar;C:/Sun/SunAppServer8/lib\appserv-rt_zh_CN.jar;C:/Sun/SunAppServer8/lib\appserv-upgrade.jar;C:/Sun/SunAppServer8/lib\commons-launcher.jar;C:/Sun/SunAppServer8/lib\commons-launcher_es.jar;C:/Sun/Sun

    Hi,
    Seems you are having socket time out exception. I use to get the same while deploying on XP with (640MB RAM) but able to re-run after freeing some memory. Creator needs optimally atleast 1GB RAM. You have not mentioned your machine RAM...
    It might just help..
    dr.am mohan rao

  • Error when trying to open 'Hyperion FDM App Server Config Manager'

    Hi,
    When I am trying to open FDM App Server Config Manager/Load Balance configuration/Task Manager configuration,I am getting the below error
    ' COM object with CLS ID-{xxxxx} is either not valid or nor registered'
    Could any one explain me what this error mean and what impact will it have on existing FDM application.
    Thanks in advance

    Hi,
    Could you please check the IIS log and see what’s the error code?
    Try using the administrator account to log in the Outlook and see if he can see the apps successfully.
    Thanks,
    Simon
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Content server - config?

    Dear all,
    I am working on DMS with Content server.
    Particullarly now in CONTENT server CONFIG.
    Any one could kindly help me out with the procedure and documents.
    Regards,
    John.

    Dear Ronald,
    Just now saw your reply.Thanx for the care.
    I was working in a different location for past 2 days so i couldn't see the mail.
    Actually v r trying to shift our db to SAP.And we r using DMS(Document Management System) and using webdocuments a BSP for interaction with database(Content server.)
    So v want to push up our data into <b>HTTP enabled CONTENT SERVER</b>.For this i need help on Cofig. of content server.
    Awaiting your reply.
    Thanx & regards,
    John wesley.

  • How to View BI Server Config parameters with Jconsole

    Hi Experts
    I want to examine the OBIEE 10g Server config params using the JConsole. I tried to start the Java agent by, navigating to the directory *"<oraclebi home>\systemdmanagement”*, and issuing the command *“runagent”.*
    I guess I am missing some options /variables that I would need to pass when issuing *“runagent”.*
    Please suggest . Thanks in advance.
    Edited by: 858793 on May 22, 2013 6:42 AM

    one you have the data in the infosource, for performance and holding history, you shoudl move the data in a ods or a cube.
    ODS for daily report, only daily data no history
    CUbe for historical Reporting and daily reporting.
    you wil need to create update rules. and process chain to load data in yoru data targets( ODS or CUbe). then create a query on them. play with the query how you want the data to show. try to USe 7.0 as its more flexible if not 3.5.
    you can broadcast it straight to e-mails using web broadcasting. other wise create web template( as define in the steps in the previous post).
    remember do everything in yoru SANDBOX system or Development system. do not under any circumstances do this in production or testing.
    any question feel free to post
    hope this helps.
    Amer

  • SQL Server Config Manager, Windows Administration Tools, Manage Computer and Task Manager

    I want to cross check the
    SQL Server Config Manager, Windows Administration Tools, Manage Computer and Task Manager
    for running of SQL SERVER.
    I stop SQLEXPRESS instance in one of the above tools but the others become unaware of the latest changes except
    Task Manager.
    For example when I stop SQL EXPRESS from within SQL Server Congiguration Manager
    it still seems working in Windows Administration Tools, Manage Computer windows.
    What is the reason for this?

    Hi,
    Aprat from SQL Server configuration manager all other are windows tool and should not be used to manage SQL Server in anyway. Although I cannot completely understand list of tools you mentioned
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
    My Technet Wiki Article
    MVP

  • I have a big problem :( why is it i cant update my ipod touch 2g into ios 4! im using the latest version of itunes and everytime i click "update" it stucks on the "contacting server" please help :( i want to update it now

    i have a big problem why is it i cant update my ipod touch 2g into ios 4! im using the latest version of itunes and everytime i click "update" it stucks on the "contacting server" please help i want to update it now

    Maybe here:
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

  • Updated to ios6 on my ipod touch 4g when i try to turn it on it doesn't, it just comes up with the itunes symbol and the usb, so i plugged into laptop opened itunes and it says to restore back to ios5 i pressed restore and it cant connect to server? help?

    updated to ios6 on my ipod touch 4g when i try to turn it on it doesn't, it just comes up with the itunes symbol and the usb, so i plugged into laptop opened itunes and it says to restore back to ios5 i pressed restore and it cant connect to server? help?

    Maunally restore it. In order to do this:
    -Download the iOS 5.1.1 firmware from here  http://www.redmondpie.com/download-5.1.1-ios-for-iphone-4s-4-3gs-ipad-ipod-touch -direct-official-links/
    1. After downloading the firmware from the given link, open iTunes and click on your device.
    2. Now press SHIFT on your keyboard and while pressing it click on "Restore".
    3. A dialog box will appear.
    4. Select the firmware you downloaded and click ok.
    5. Done!!! Your iPhone will now be restored to 5.1.1 and if you had backed up your iPod before, then you can put all its settings afterwards.

  • Ipod screen says to connect to itunes but won't let me enter my password. Tried recovery mode but when I click 'restore' itunes says it cannot connect to update server.  Help!

    Ipod screen says to connect to itunes but won't let me enter my password. Tried recovery mode but when I click 'restore' itunes says it cannot connect to update server.  Help!

    Place the iPOo in recovery mode for the passcode issue. For recovery mode:
    iPhone and iPod touch: Unable to update or restore
    Also see:
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

  • I'm trying to setup my email, it's my work email and they don't provide an outgoing server, need help

    I'm trying to setup my email, it's my work email and they don't provide an outgoing server, need help.

    With an attitude like that, you got nicer replies than you should have.  I have my work email on my iPhone and my iPad, but there's no way on earth anyone here would have known what my companies server is other than my company system administrator.........

  • Possible to add and persist elements in server config, for use by cons ext?

    I'm considering what will be my obstacles if I try to write a console extension that we would use to view excerpts of an application log file, the application of which is deployed to each server in our domain(s). It doesn't log to the WebLogic server log, it writes it to an external log file (through log4j), and each server (several servers on each box) uses a slightly different path to its log file.
    One issue that I'll have is getting the console extension to know what the path to the log file is. I think the best way, over all, is just to have the user enter the path in the form presented by the console extension. My problem is how to persist that setting, because I'd prefer they didn't have to enter that every time they entered the form.
    Several years ago, I wrote a console extension for WL 8.1.4 which had a similar issue. I ended up simply writing the setting into a properties file inside the extension WAR. This only works (I believe) if the WAR is deployed exploded. I could do that, but I don't like that idea very much.
    What would be nice is if I could "extend" the server config.xml with an additional element in the "Server" element, where I could store this information. Unfortunately, I don't see any support for doing something like that.
    Another alternative I'm considering is whether it's possible to extend the "Summary of Log Files" page in "Diagnostics" with an application-specific log file, but I don't see any way to do that.

    Well, I appreciate the suggestion, but it's not exactly a secret, to me at least. I've used it for human-readable things recently. It occurred to me that that might be my only option, but I certainly wasn't going to assume that. As it seems like this is likely my only option, I guess I can see some interesting conventions for dealing with this. You have to assume that the field could be written to by other code, and that code would have to make the same assumption. I guess I'd have to define a certain XML element as the root of my structure. If I find it, that region between the start and end element is mine to use and modify. If I don't find it, I'll insert my element at the end of the field value.

  • Wlserver.exe error occur while start the web logic server-please help

    hi
    Iam getting wlserver.exe error when I start the web logic server-please help. and I cant able to start the web logic server.
    Thannks in Advance,
    Cheers,
    bala...

    Could you please mail the errors and the WLS Version and service pack as well.
    - Ramkumar

  • Is it safe to edit /Library/Server/Config/ from outside Server.app?

    I want to add a virtual_mailbox_domains directive to /Library/Server/Config/Mail/postfix/main.cf for postfix.  Is that safe to do?  Will my changes be retained across  version updates?

    AnalogKid wrote:
    I want to add a virtual_mailbox_domains directive to /Library/Server/Config/Mail/postfix/main.cf for postfix.  Is that safe to do?  Will my changes be retained across  version updates?
    I've modified that file from the command line numerous times in SL Server in order to make configuration changes that can't be done through Server Admin, so I would expect it to work the same in ML Server.

Maybe you are looking for

  • A/P Down Payment

    Hi Experts, To post Advances given to Vendors we are using A/P down Payment invoices and Outgoing Payments linked to A/P Down Payment. This in turn will be linked to A/P Invoice. But our accountants are finding difficulty when they look at the vendor

  • How to access sent folder in mail?

    couple of questions: 1) how to access sent mail folder to assure that mail has been sent? 2) how to attach a document to email? 3) how to create additional folders in mail? using att wifi

  • Continuing iMac overheating

    I posted about this previously. My iMac has been running very hot for the last few weeks.  I have had the machine for 2 years and it is a definite change.  By hot I mean that after an hour of use or so the power supply is up to 84+ celsius (180+ F) a

  • Surround Sound not working on Mac Pro (Early 2008)!

    I'm writing this as my last ditch attempt to solve my problem. Recently I bought a 5.1 Onkyo AV Receiver, model HT-R558 as for the audio output of my machine. I have connected the device components, however when connected to my Mac using a TOSLINK ca

  • Photoshop unexpectedly quits -- repeatedly, especially when lassoing

    After opening Photoshop and working on a photo, if I lasso something, I get "Unexpectedly Quit" over and over. Often when I try to save work, I get Unexpectedly Quit." I can't work in Photoshop if I can't count on it. How can I fix this? Please help.