Service down in the Portland, TX. area??

Hi, I have had Verizon now for almost 2 years, and have been in this same residence for the whole period of time. This morning, I noticed my phone, as well as my wife's phone (we both have iPhone 4 32gb phones), kept dropping out of 3G and going to Extended, and sometimes nothing at all. Cannot make any phone calls, whatsoever. Texts go through really hit and miss.
These are our only phones. We do not have landline service. We need our service back!!!
Ian

Hi txsizzler,
I am sorry to learn that you are experiencing service issues. No services issues are noted in our system for Portland. I trust that your service is back to normal by now. If you still have service issues please reprogram your phones by dialing *228>send>option 1>power off/on at end of call.
Please keep in mind that this is a peer to peer forum and while our Social Media team monitors the posts, the best way to get immediate assistance when network issues are suspected is to call 800-922-0204 from a different line to troubleshoot your device or send us a message on twitter at @VZWSupport.
AntonioC_VZWSupport
Follow us on Twitter at www.twitter.com/VZWSupport

Similar Messages

4G LTE service down in the Norfolk, VA area?

I've not had a 4G LTE connection in several days. 3G working well, but the speeds are, well, 3G speeds. I work in Norfolk, VA (23501) area and live in the Smithfield, VA area (23430). Usually get outstanding 4G LTE service in both locations, and along the commute route. 4G has been down for days. Can anyone explain why or if they are experiencing similar issues?

I had this issue for months. See this forum thread. https://community.verizonwireless.com/thread/813020
It's a network problem. Probably due to congestion. I never had slow data during off-peak times. I tried to work with customer service to get it someone to look into it and service the nearby towers but they just make it way to convoluted and confusing to get anything done. Thanks Verizon and your forced arbitration.
I switched about a month ago to Ting Mobile. It's now costing me half the price and my data speeds are actually 4G. Ting.com.

On my drop down menus, the items listed are appearing twice.

On my drop down menus, the items listed are appearing twice. For instance, there are two "shut down" and two "restart." How do I fix this?

Hi Peter, and a warm welcome to the forums!
See Tom Gewecke's post here...
http://discussions.apple.com/thread.jspa?messageID=4395251&#4395251
This problem has been reported serveral times. It seems to be a loss of access to the main system font. I've not heard of any cure except a reinstall.
It appears to be time for a relatively painless Archive & Install, which gives you a new/old OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space and no Disk corruption, and is relatively quick & painless...
http://docs.info.apple.com/article.html?artnum=107120
Just be sure to select Preserve Users & Settings.

Server Shutting down, when the Concurrent Users are more

Hi,
We are working on EP 5.0 SP5, our problem is that if the concurrent users are more automatically our LDAP or Portal is shutting down (approximately 300 or above..).
For this problem where we have to check? help can be appreciated...
Regards,
Sudhir

Hi,
If you portal is shutting down when it is getting a high load I would look at the memory settings defined in the configtool (if you are using a service or the startupframework) or the go.bats if you are running them manually. I would assume that the problems comes from the java process not being able to get enough memory, so try increasing the heapsize parameter Xmx (?)
See notes
597187
696410 (for EP6 but content and related notes should be relevant)

RTMT Displaying Critical Service Down, However The Cluster is Stable.

Hi All,
Need a little ?
I have a CUCM Cluster consisting of 1 x Pub & 1 x Sub in a Dev Enviroment, we recently installed RTMT and noticed we get the following alarms
for the Pub and Sub.
Alert Name = Critical Service Down, Severity = Critical, Description = Service Status Down SNMP Master Agent
Alert Name = Critical Service Down, Severity = Critical, Description = Service Status Down Cisco Messaging Interface SNMP Master Agent
The alarms are genegrated every minute and is really annoying. Can't figure out why we keep getting this as the Cluster appears to be fuctioning ok.
Is there anyway to put a Halt to the alarms?
Please see my attached screenshot any help is appreciated.
Regards
Charles

These are precanned alerts for Critcal Service Down alarms in RTMT. The SNMP Master Agent and CMI services that are listed here are considered critical services; however, they would not typically have any impact on system performance. In fact, if you don't use SNMP then you wouldn't need the SNMP Master Agent service activated or started. So, I believe the likely scenario here is that all of the services in the cluster are activated but not all of them are started. In other words, you may have activated everything and then selectively started the services you need. I believe if you deactivate the specific services referenced, you should stop getting these alerts.
Hailey
Please rate helpful posts!

With the latest upgrade to 7.0.1 the Url's that appear on on the pull down of the URL bar, are in a different order and one that doesn't appear to have any logic to it. what determines the order?

In the past, the URL's used seemed to be in order of use. The sites I went to most often were at the top of the pull down list. Now they are jumbled.
FWIW, I find this feature to be very useful. I use it routinely as a very quick way to get back to sites I visit most frequently. I use the bookmark bar for secondary sites, and bookmarks for tertiary sites.

I followed the instructions in your first link, but I don't have a user.js file, and in any event, the instructions there aren't really relevant. The problem isn't that Firefox doesn't remember this setting, it's that I can't set Firefox to put a New Tab button on my Navigation bar in the first place because it's not in the list of items I can select. And yes, I've tried restoring the default set several different times with no effect. I know that the button exists, because I can see it on the copy on my laptop, even after the upgrade. The only thing I haven't tried (maybe) is disabling all plugins, so I'll try that and report back.

Shutting down when the concurrent users are more

Hi,
We are working on EP 5.0 SP5, our problem is that if the concurrent users are more automatically our LDAP or Portal is shutting down (approximately 300 or above..).
For this problem where we have to check? help can be appreciated...
Regards,
Sudhir

Hi,
look at thread:
SAP J2EE engine shuts down frequently
Regards,
Gerhard

I am unable to make or receive phone calls. I also have not been able to connect on chat. Is service down in the Boston area?

If service is down, it would be really a good thing to let your customers know.

I am having the same issues. I thought it was just my phone.
Seems to be a sporadic problem with the service as I know others on Verizon that have service.
Several tweets have gone unanswered. Would be nice if Verizon would acknowledge this issue and let us know what is going on and when we can expect service again. I am 7mo preg with other kids in school, and have NO means of getting calls in or out if I am needed in an emergency.

IMessages not getting through - is the service down in the UK?

Today my iMessages are not going through - eventually they turn up as text messages hours later. I can't find any information on the service status. Can anyone confirm if it is offline or point me in the direction of a status update?
Cheers,
Mike

No joy with that. Sigh…
"Always do right. This will gratify some people, and astonish the rest" Mark Twain
Frank
Private info removed as required by the Terms of Service.
Message was edited by: Admin Moderator

My i cloud is on with my macbook air, but no pictures are comming down from the cloud, they are there, via my I-phone

My I-cloud is not transfering pictures to my computer..its turned on, and password on, the calender is working..

Log out of iCloud in the System/iCloud preference pane and disable Photo Stream in iPhoto's Photo Share preference pane. Then log back in and re-enable, respectively. That should jump start Photo Stream.
OT

Services down - config issue or css limitation?

I am load balancing three routers using the CSS11150. I have setup the three routers as primary, secondary and tertiary services. The routers feed X25 lines with the route determined by the port number. Everything works fine until I get above 100 services and then services do not go active. I can enter content rules okay but the services are down. The external connections are connecting to the vip address and specified port number (9000 - 9500). Have I hit the limit on the CSS and if so what do I need to upgrade to?
Config:
service Test01_pry
port 9001
ip address 172.7.1.2
active
service Test01_sdy
port 9001
ip address 172.8.1.2
active
service Test01_ter
port 9001
ip address 172.9.1.2
active
service Test02_pry
port 9002
ip address 172.7.1.2
active
service Test02_sdy
port 9002
ip address 172.8.1.2
active
service Test02_ter
port 9002
ip address 172.9.1.2
active
service Test03_pry
port 9003
ip address 172.7.1.2
active
content Test9001
protocol tcp
port 9001
vip address 217.x.x.104
add service Test01_pry
add service Test01_sdy
add service Test01_ter
active
content Test9002
protocol tcp
port 9002
vip address 217.x.x.104
add service Test02_pry
add service Test02_sdy
add service Test02_ter
active
content Test9003
protocol tcp
port 9003
vip address 217.x.x.107
add service Test03_pry
add service Test03_sdy
add service Test03_ter
active
content Test9500
protocol tcp
port 9500
vip address 217.x.x.145
add service Test500_pry
add service Test500_sdy
add service Test500_ter
active

the limit is actually 256 keepalives of one type [in this case icmp as the default].
http://www.cisco.com/univercd/cc/td/doc/product/webscale/css/css_610/bsccfggd/services.htm#wp1026607
But there a limit of 64 concurrent icmp keepalive.
It means you have to adjust the keepalive frequency to avoid having more than 64 keepalive firing at the same time.
The CSS11500 can support more keepalives.
The limit is increase to 2048.
http://www.cisco.com/en/US/products/hw/contnetw/ps792/products_command_reference_chapter09186a008028fe5c.html
Regards,
Gilles.
Thanks for rating this answer.

Better Customer Service reps that know what they are doing.

I recently had the horrible experience of trying to dispute a matter over the phone with a customer service rep, which was a HUGE hassle. I had an easier time looking up the information on the internet and doing it myself because all the reps like to do is transfer from one person to the next without ever answering any questions. Are the reps even trained? It didn't seem like it to me. They were rude and couldn't answer any questions I had which is part of the reason I didn't want verizon in the first place. . . They don't make you feel like you are anything more than a dollar sign

I have only been with Verizon 1 week. Loving the service itself but the customer reps are not even medicore. Everytime I call I give the same information to a rep that passes me to another and yet another and I give the same information over and over. Then I get hung up on and no one calls me back. I have to then go through the process yet AGAIN. I try live chat and almost an hour later and giving the same information to that rep repeatedly in the same chat conversation - I am still trying to get the issue resolved. Come on Verizon get with it.

Microsoft Service Pack 2 - not all versions are equal; how to update to the latest one "safe

I posted this under another topic where it was relevant, but thought the instructions I got from Microsoft were useful (as was my experience in using them as I sent back a reply to them with the problems I encountered [none of which were particularly bad]):
One important point to note is that not all Windows XP SP2 upgrades are equal.
I had a different issue and spoke to Microsoft, who advised me to uninstall the version of SP2 I had and reinstall the newest version (the old version was about 70mb, the new one nearly 250mb).
Apparently the old SP2 had quite a few problems with it; I've found the new one to be "simply stress free" since installing...
The SP2 file name I installed (ie the newest at the time I did it) was "windowsxp-kb835935-sp2-enu".
Here's their instructions - I disagree with the way round that they suggested downloading the update (ie I would strongly advise downloading the update and having it sitting on your desktop before doing anything!!! - please see my feedback email to them that follows (you will note that I had problems connecting to the internet after uninstalling the earlier version; this, combined with the fact that I could barely read what was on the screen would have given me a major inconvenience had I not done this)!!! (and don't blame me if it goes horribly wrong - it's also worth double-checking that the version of SP2 the email links to is the most up to date. I've had a quick check myself, and it does indeed appear to still be the most up to date):
MICROSOFT'S EMAIL (make sure you also read my reply below):
MESSAGE:****************************************** ****************************This is an email from Microsoft about your support incident.When replying to this address: + It helps us if you do not include the original message + Please keep the case number (SRxxxx) in the subject lineThank youMicrosoft Product Support Services ******************* The message from Microsoft follows ****************Hi Gregory,Firstly uninstall SP2 by going to Start>Control Panel>Add/Remove Programs and then reinstall it in a clean boot.. Click Start >> Run >> In the run dialog box type msconfig and then click ok 2. Put a dot in selecti've startup 3. Uncheck all of the check boxes that become available except Process System.ini file and Load system services 4. Go to the Services tab along the top, click Hide all Microsoft Services 5. Then disable any remaining services 6. Click apply and then close 7. Finally select yes, this will start in a clean boot. 8. Then go to (http://www.microsoft.com/downloads/d...DisplayLang=en) and download and install Service Pack 29. To return your PC to normal, open the System Configuration Utility, click "Normal Startup", click OK and restart. Then restart your computer and try accessing updates againPlease let me know the results of these methods, particularly if there were any steps that you were unable to complete successfully.
MY REPLY:
HiI successfully carried out the installation on Saturday.A few minor problems ensued (the second one may have cause a novice user real problems! Certainly caused me some concern whilst working through it!). I had to reinstall ATI drivers from scratch (for Radeon 9800 Pro); this was however the only set of drivers that appeared to "detach" itself. The main problem here was that instead of using the usual standard VGA driver (which it does when I uninstall it once a month to install updated drivers), it used some other driver that made the screen very difficult to see (especially on blue backgrounds!). Running ATI's total uninstall program sorted this out however, and fortunately I had the last update package from ATI still on my system. After uninstalling and reinstalling there appeared to be no further video problems.2. After installing SP2 (and before installing above), whilst I was in the process of getting everything up and running (eg installing the security updates) the system randomly froze about 4 or 5 times; the only way to sort this out was to use the power button. I traced this problem to Windows changing my wireless networking settings so that it handled everything; I have a Netgear adaptor the software for which usually controls this (Netgear Smart Wizard). Basically the two were trying to do the same task and causing crashes; on switching Windows management off, things settled down (the Netgear driver did not need to be reinstalled).3. As a minor point, after the upgrade and installing all other updates, I noted that Microsoft Update was no longer running; I had to reinstall it from Windows Update and the messages I got whilst installing suggested that it was still partially installed but that there were problems with it. It now works.4. As a final minor point, I attach the Scan log from Registry Mechanic which I ran after everything was up and running; it fixed various problems within the registry. I note that the majority of errors are inconsequential, but note that a few do relate to the various Microsoft installs; maybe the installer program for SP2/ Media Player 0 need to sort these out in future releases? Don't think they're a real problem though!The instructions supplied worked fine; one thing I would suggest is that users are instructed to download the SP2 upgrade pack to their desktop prior to uninstalling the original SP2; I believe that my internet connection problems started after I had uninstalled the original SP2 which may have caused problems downloading the new SP2. It also ensures that the download is successful (eg if the site was down for maintenance); I was advised whilst uninstalling SP2 that about 20 programs/drivers would not work properly after the uninstall and so the immediate reinstall was vital!One thing that seemed to fix after reinstalling was a problem I was having installing Media Player 0; after installing it previously, every time I checked for updates on it the whole program would reinstall. Now however this has fixed. I will let you know if I encounter any further problems, but things all seem to be fine now, touch wood.....!
Hope this helps!Message Edited by gjc26 on 0-27-2006 02:50 AM

One small thing - I believe the reason why some of my drivers were messing up was because they were SP2 specific; the older drivers and the ones that were compatible with both SP and 2 were fine.
As soon as I did the reinstall, all of the drivers/programs that were not working, worked (aside from the ones that I mentioned in my attached email above).
So, if after uninstalling the old SP2 you are told that loads of drivers/programs will not work, fear not - most should fix themselves upon installing the new SP2.
G

BI cluster DOWN but the services and the admin server is all UP in OBIEE 11G.

Hi
Please suggest me some solution that if the BI cluster is DOWN and all the other components are all UP.Only the BI cluster and the Biserver_1 is DOWN under bicluster.so that the analytics is not working and showing in the Internet Explorer as "The Page Cannot be Displayed". But the EM and the Console are Working fine.

Some times it may happen because of the services if they are not started in order
./startNodeManager.sh
nohup ./startWeblogic.sh -Dweblogic.Management.username=username -Dweblogic.Management.password=password > AdminServerStart.log & tail -f AdminServerStart.log
nohup ./startManagedServer.sh bi_server1 -Dweblogic.Management.username=username -Dweblogic.Management.password=password>bi_serverstart.log & tail -f bi_serverstart.log
./opmnctl startall
Try this and let us know the out come.
Mark if helps,
Thanks,

Unable to initialize the Microsoft Exchange Information Store service because the clocks on the client and on the server machine are skewed

Each time I restart this exchange server, the Information Store and System Attendant don't start. If It try to manually start the services, I get the follow errors:
Event ID 5003:
Unable to initialize the Microsoft Exchange Information Store service because the clocks on the client and on the server machine are skewed. This may be caused by a time change either in the client or the server machine, and may require a reboot of that machine. Other than that, verify that your domain is properly configured and is currently online.
Event ID 1005:
Unexpected error The clocks on the client and server machines are skewed. ID no: 80090324 Microsoft Exchange System Attendant occurred.
The clocks on the domain controllers and the exchange server are set to the same time zones. As well, all three clocks are in sync down to the second. Any ideas on what's causing this and how to fix it?

Run this Command from the Exchange Server
Net time \\ADServerName /Set
and confirm the action,
and then you need to restart the service
Microsoft Exchange Active Directory Topology Service
and confirm you are not getting the Error 4001 in the event Viewer.
Thank you, it resolved my issue after being sweating looking for solution.
How can I prevent this from happening? I cannot restart services on each server reboot nor lose 5 years of my life!!!
Sokratis Laskaridis MCP, MCTS, MCITP, Small Business Specialist Netapp ASAP, Symantec STS

Service down in the Portland, TX. area??

Similar Messages

Maybe you are looking for